Re: [time-nuts] HP 3586B for 60 KHz
The BFO is (are, one for USB and one for LSBY the only oscillator that is not phase locked to the HP10811 inside, and that can be remedied, so it is not hopeless. Didier Sent from my Verizon Wireless BlackBerry -Original Message- From: J. Forster j...@quik.com Sender: time-nuts-boun...@febo.com Date: Sun, 3 Oct 2010 17:57:05 To: Discussion of precise time and frequency measurementtime-nuts@febo.com Reply-To: j...@quik.com, Discussion of precise time and frequency measurement time-nuts@febo.com Subject: Re: [time-nuts] HP 3586B for 60 KHz It will receive the signal fine, but the internal frequency conversions are likely not phase stable, so it's probably useless for tracking the carrier phase which is needed to use WWVB as a frequency standard. -John === Gents, Wrote Has anybody used a HP 3586B for a 60KHz receiver? If so, how well did it work? Replied Seriously, a HP3586B would be a fine receiver for a WWVB timing setup, but way, way, overkill. Thanks. That’s great news. I have three working and can probably fix three of the other four I have. Yes, I’m nuts about the suckers. FYI, There are articles on how to use this for numerous types frequency measurements on the BAMA web site. Also it can be used as a SSB receiver up to 32 MHz is you can put up with a lack of agc and a good speaker. Regards, Perrier ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] HP 3586B for 60 KHz
This was my concern how would it be remedied. Simply is the better ? I would understand DDS as an example On Mon, Oct 4, 2010 at 6:05 AM, shali...@gmail.com wrote: The BFO is (are, one for USB and one for LSBY the only oscillator that is not phase locked to the HP10811 inside, and that can be remedied, so it is not hopeless. Didier Sent from my Verizon Wireless BlackBerry -Original Message- From: J. Forster j...@quik.com Sender: time-nuts-boun...@febo.com Date: Sun, 3 Oct 2010 17:57:05 To: Discussion of precise time and frequency measurement time-nuts@febo.com Reply-To: j...@quik.com, Discussion of precise time and frequency measurement time-nuts@febo.com Subject: Re: [time-nuts] HP 3586B for 60 KHz It will receive the signal fine, but the internal frequency conversions are likely not phase stable, so it's probably useless for tracking the carrier phase which is needed to use WWVB as a frequency standard. -John === Gents, Wrote Has anybody used a HP 3586B for a 60KHz receiver? If so, how well did it work? Replied Seriously, a HP3586B would be a fine receiver for a WWVB timing setup, but way, way, overkill. Thanks. That’s great news. I have three working and can probably fix three of the other four I have. Yes, I’m nuts about the suckers. FYI, There are articles on how to use this for numerous types frequency measurements on the BAMA web site. Also it can be used as a SSB receiver up to 32 MHz is you can put up with a lack of agc and a good speaker. Regards, Perrier ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] HP 3586B for 60 KHz
Gents, Wrote Has anybody used a HP 3586B for a 60KHz receiver? If so, how well did it work? Replied Seriously, a HP3586B would be a fine receiver for a WWVB timing setup, but way, way, overkill. Thanks. That’s great news. I have three working and can probably fix three of the other four I have. Yes, I’m nuts about the suckers. FYI, There are articles on how to use this for numerous types frequency measurements on the BAMA web site. Also it can be used as a SSB receiver up to 32 MHz is you can put up with a lack of agc and a good speaker. Regards, Perrier ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
