This was my concern how would it be remedied. Simply is the better ? I would understand DDS as an example
On Mon, Oct 4, 2010 at 6:05 AM, <[email protected]> wrote: > The BFO is (are, one for USB and one for LSBY the only oscillator that is > not phase locked to the HP10811 inside, and that can be remedied, so it is > not hopeless. > > Didier > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: "J. Forster" <[email protected]> > Sender: [email protected] > Date: Sun, 3 Oct 2010 17:57:05 > To: Discussion of precise time and frequency measurement< > [email protected]> > Reply-To: [email protected], Discussion of precise time and frequency > measurement > <[email protected]> > Subject: Re: [time-nuts] HP 3586B for 60 KHz > > It will receive the signal fine, but the internal frequency conversions > are likely not phase stable, so it's probably useless for tracking the > carrier phase which is needed to use WWVB as a frequency standard. > > -John > > =========== > > > > > > Gents, > > > > Wrote> Has anybody used a HP 3586B for a 60KHz receiver? If so, how well > > did it work? > > > > Replied >Seriously, a HP3586B would be a fine receiver for a WWVB timing > > setup, but way, way, overkill. > > > > Thanks. That’s great news. I have three working and can probably fix > > three of the other four I have. Yes, I’m nuts about the suckers. > > > > FYI, There are articles on how to use this for numerous types frequency > > measurements on the BAMA web site. > > > > Also it can be used as a SSB receiver up to 32 MHz is you can put up with > > a lack of agc and a good speaker. > > > > Regards, > > > > Perrier > > > > > > > > > > > >_______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
