Re: [time-nuts] Navsync CW25 undocumented messages

[Ed Palmer]

Hi Mark,

The CW25 is the model number of the little circuit board, but the model 
number for the GPS module itself is CW12.  So if you search google for 
, you'll find the user's manual for the CW12.  At 
least, it's the version that emulates the Motorola M12.


Ed


___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to 
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.

[time-nuts] Navsync CW25 undocumented messages

[Mark Sims]

After upgrading the firmware in my CW25, I took a look at the new firmware .bin 
file and found what looks like some undocumented / new messages and parameters.

I sent it requests for the unknown parameters and got back these strings:

$PRTHR,PPSO,0,0,10*51
$PRTHR,MCNO,30*40
$PRTHR,IDNO,00*40

Does anybody know what the PPSO, MCNO, and IDNO parameters are?  

The PPSO one sounds interesting... perhaps a PPS offset or cable delay setting? 
 

Maybe MCNO is a signal level mask?  It returns 30, but my receiver is tracking 
sats with quite a bit lower signal levels.

I also found references to the following messages:
$POLYD
$POLYN
$POLYX
$GPRMX (?)

I tried enabling them but got no response.  The $POLYx messages are proprietary 
Navsync NMEA format messages.


___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to 
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.