After upgrading the firmware in my CW25, I took a look at the new firmware .bin file and found what looks like some undocumented / new messages and parameters.
I sent it requests for the unknown parameters and got back these strings: $PRTHR,PPSO,0,0,100000*51 $PRTHR,MCNO,30*40 $PRTHR,IDNO,00*40 Does anybody know what the PPSO, MCNO, and IDNO parameters are? The PPSO one sounds interesting... perhaps a PPS offset or cable delay setting? Maybe MCNO is a signal level mask? It returns 30, but my receiver is tracking sats with quite a bit lower signal levels. I also found references to the following messages: $POLYD $POLYN $POLYX $GPRMX (?) I tried enabling them but got no response. The $POLYx messages are proprietary Navsync NMEA format messages. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.