[Tinyos-help] MDA 300
Hi everybody I ask you about I2C Pins of the MDA300. I should connect a sensor into my MicaZ network and I see we have I2C pins in the MDA300. In fact, I’ve a sensor that works as follow: 1) When an event is detected, the Enable output signal set up (edge). (here I should make an interrupt with my MDA300 Digital Pin D0) 2) After that, I should create a clock into the Clock pin of my sensor (Fmax=4Mhz) 3) In the rhythm of this clock, I read the data (32 bits) from the serial data output of my sensor. 4) At the end, a signal SDRY set up in high level during 100ns to inform the end of transactions. So, can I use the I2C Clock and I2C Data pin in this case, with D0 and D1 for Enable & SDRY signals? Or should I use 4 digital pins of my MDA300 and generate myself the Clock. Someone have an application working with I2C interface? Thanks for your Helps Matt ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] MDA300 Problem
Hello everybody I’m using tinyos-1.15 version with MicaZ motes and should connecting a sensor into my network. When I compiled the application XsensorMDA300 into my micaZ with Mda300 interface, I’ve got errors. Does MDA300 application works with micaZ motes? In fact, my sensor used the I2C Port for sending the data. Where can I find an exemple source code for I2C of MDA300 please? Thanks for Reply Matt ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Cygwin problem
Andres gave me the answer… We should use ,/dev/ttyS0 and not com1 when we write the command under cygwin I think the file where /dev/ttyS0 = com1 has been changed but I don’t know what is it? Thanks for help Sincerely Matt ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Cygwin Version Problem
Hello everybody I am using tinyOS-1.15 under Cygwin application (the original cygwin from tinyos 1.1.0) But when I upgraded my Cygwin version (into 1.2 or 1.5), I can’t upload my application into my motes. In fact, after writing the command make micaz install,0 mib510,com1, It compiles the program, detects my card but doesn’t transferred the code into my micaZ ??? What change should I do??? Thanks a lot Sincerely Matt ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] FTSP with MicaZ Problem
Hello everybody, I’ve tested the FTSP Protocol into my MicaZ Motes. After I used PrintDiagMsgs and first, it starts printing the messages: NodeId | SeqPolling | GlobalTime | LocalTime | Skew | Synched? | Rootid | Seq | Msgstored 2 1 0 0 0.0 0 65536 0 0 3 1 0 0 0.0 0 65536 0 0 4 1 0 0 0.0 0 65536 0 0 2 3 0 0 0.0 0 65536 0 0 3 3 0 0 0.0 0 65536 0 0 4 3 0 0 0.0 0 65536 0 0 2 6 0 0 0.0 0 65536 0 0 3 6 0 0 0.0 0 65536 0 0 4 6 0 0 0.0 0 65536 0 0 2 9 0 0 0.0 0 65536 0 0 3 9 0 0 0.0 0 65536 0 0 4 9 0 0 0.0 0 65536 0 0 … And After 2 minutes, the regression lines are built and it became synchronised, I obtained: 2 243 0 0 0.0 1 4 1 1 3 243 0 0 0.0 1 4 1 2 4 243 0 0 0.0 1 4 1 1 2 245 0 0 0.0 1 4 2 0 3 245 0 0 0.0 1 4 1 1 4 245 0 0 0.0 1 4 1 2 ……. So it's strange because my LocalTime = GlobalTime = and motes seems perfectly synchronised (the motes are able to obtain the SeqPolling and “synched?” bit = 1) So, I’m searching into the program files why the values of LocalTime from receiver Motes are not displayed and don’t change… (GlobalTime = LocalTime)? Somebody have any idea about the no value of LocalTime??? Perhaps Problem using interface TimeStamp when call the function ( call TimeStamping.getStamp() ) in the timesyncdebuggerm.nc file? or incompatibility with MicaZMotes?? Somebody have a Vu directory with the good TimeStamp interface or TestTimeSync Application tested on MicaZ? Thanks for your reply and your helps Sincerely Matt ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] TIME Synchro into Mica2 MicaZ Motes
Hello I have tried Time Synchronisation TPSN source code for Mica2 from www.ee.ucla.edu/~saurabh/time_synchronisation. I want to know how we can test and view the synchronisation? Which software should I use? (Moteview,Surgeview or ...?) Is it possible to compile Mica2 source code for MicaZ Motes? What should I have to change in the source code? Have somebody TPSN source code implemented successfully into MicaZ Motes??? Thanks a lot for your reply Matt [EMAIL PROTECTED] The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
[Tinyos-help] Time Synchro Problems
Hello I'm trying to use Time Synchro TPSN source code for Mica2 from www.ee.ucla.edu/~saurabh/time_synchronisation but it doesn't work (give me many error during compilation). Is it possible to compile Mica2 source code for MicaZ Motes? What should I have to change? Has anybody a TPSN source code for MicaZ??? Thanks a lot Matt [EMAIL PROTECTED] ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help