[Touch-packages] [Bug 1783499] Re: systemd: Failed to send signal
We sent all the logs and captures data to HPE and they asked to update the BIOS to the latest one. We already using the latest firmware, 4 months past the recommended firmware. Also, we have 200 servers with Windows 10 doing same test - reboot after each test and there are no hangs. HPE stated that they do not have any other reports of hangs on reboots or shutdowns for this hardware. Any other suggestion from your side? Meanwhile I'll do a dist-upgrade from 16.04 to 18 and do the reboot test. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to dbus in Ubuntu. https://bugs.launchpad.net/bugs/1783499 Title: systemd: Failed to send signal Status in dbus package in Ubuntu: Confirmed Status in systemd package in Ubuntu: Confirmed Bug description: systemd: Failed to send signal. [3.137257] systemd[1]: Failed to send job remove signal for 109: Connection reset by peer [3.138119] systemd[1]: run-rpc_pipefs.mount: Failed to send unit change signal for run-rpc_pipefs.mount: Transport endpoint is not connected [3.138185] systemd[1]: dev-mapper-ubuntu\x2d\x2dvg\x2droot.device: Failed to send unit change signal for dev-mapper-ubuntu\x2d\x2dvg\x2droot.device: Transport endpoint is not connected [3.138512] systemd[1]: run-rpc_pipefs.mount: Failed to send unit change signal for run-rpc_pipefs.mount: Transport endpoint is not connected [3.142719] systemd[1]: Failed to send job remove signal for 134: Transport endpoint is not connected [3.142958] systemd[1]: auth-rpcgss-module.service: Failed to send unit change signal for auth-rpcgss-module.service: Transport endpoint is not connected [3.165359] systemd[1]: Failed to send job remove signal for 133: Transport endpoint is not connected [3.165505] systemd[1]: proc-fs-nfsd.mount: Failed to send unit change signal for proc-fs-nfsd.mount: Transport endpoint is not connected [3.165541] systemd[1]: dev-mapper-ubuntu\x2d\x2dvg\x2droot.device: Failed to send unit change signal for dev-mapper-ubuntu\x2d\x2dvg\x2droot.device: Transport endpoint is not connected [3.166854] systemd[1]: Failed to send job remove signal for 66: Transport endpoint is not connected [3.167072] systemd[1]: proc-fs-nfsd.mount: Failed to send unit change signal for proc-fs-nfsd.mount: Transport endpoint is not connected [3.167130] systemd[1]: systemd-modules-load.service: Failed to send unit change signal for systemd-modules-load.service: Transport endpoint is not connected [2.929018] systemd[1]: Failed to send job remove signal for 53: Transport endpoint is not connected [2.929220] systemd[1]: systemd-random-seed.service: Failed to send unit change signal for systemd-random-seed.service: Transport endpoint is not connected [3.024320] systemd[1]: sys-devices-platform-serial8250-tty-ttyS12.device: Failed to send unit change signal for sys-devices-platform-serial8250-tty-ttyS12.device: Transport endpoint is not connected [3.024421] systemd[1]: dev-ttyS12.device: Failed to send unit change signal for dev-ttyS12.device: Transport endpoint is not connected [3.547019] systemd[1]: proc-sys-fs-binfmt_misc.automount: Failed to send unit change signal for proc-sys-fs-binfmt_misc.automount: Connection reset by peer [3.547144] systemd[1]: Failed to send job change signal for 207: Transport endpoint is not connected How to reproduce: 1. enable debug level journal LogLevel=debug in /etc/systemd/system.conf 2. reboot the system 3. journalctl | grep "Failed to send" sliu@vmlxhi-094:~$ lsb_release -rd Description: Ubuntu 16.04.4 LTS Release: 16.04 sliu@vmlxhi-094:~$ systemctl --version systemd 229 +PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN sliu@vmlxhi-094:~$ dbus-daemon --version D-Bus Message Bus Daemon 1.10.6 Copyright (C) 2002, 2003 Red Hat, Inc., CodeFactory AB, and others This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dbus/+bug/1783499/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814562] Re: Update to new upstream 1.0.2
Built source package is located at http://people.ubuntu.com/~ricotz/ubuntu/ http://people.ubuntu.com/~ricotz/ubuntu/zeitgeist_1.0.2-0ubuntu1_source.changes -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to zeitgeist in Ubuntu. https://bugs.launchpad.net/bugs/1814562 Title: Update to new upstream 1.0.2 Status in zeitgeist package in Ubuntu: New Bug description: There is a new upstream release which fixes issues with valac 0.43/44 https://launchpad.net/zeitgeist/+milestone/1.0.2 2018-01-31: Zeitgeist 1.0.2 "Phoenix" --- Overall: - Fix compile errors and warnings with new vala - fts: Correctly implement the org.gnome.zeitgeist.Index DBus interface - test-log: Use correct free function for ZeitgeistResultSet - Do not require rapper as it is not used anymore - Make ontology2code work with python3 - Properly fallback with the Zeitgeist version - rdflib directly to parse the trig files - Update Ontology2code to ba able to specify the output path Libzeitgeist: - Asynchronous out-parameters are only allowed at the end of argument lists *** THIS IS AN UNAVOIDABLE VALA API BREAK *** To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zeitgeist/+bug/1814562/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815862] [NEW] test bug
Public bug reported: test bug ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: apport 2.20.10-0ubuntu20 ProcVersionSignature: Ubuntu 4.19.0-12.13-generic 4.19.18 Uname: Linux 4.19.0-12-generic x86_64 ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CrashReports: 640:1000:119:4491999:2019-02-14 11:28:54.686578636 +0600:2019-02-14 11:34:26.810664197 +0600:/var/crash/_usr_bin_gnome-control-center.1000.crash CurrentDesktop: ubuntu:GNOME Date: Thu Feb 14 12:53:06 2019 InstallationDate: Installed on 2019-02-14 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: apport UpgradeStatus: Upgraded to disco on 2019-02-14 (0 days ago) mtime.conffile..etc.default.apport: 2019-02-14T12:51:16.243720 ** Affects: apport Importance: Undecided Status: New ** Affects: apport (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug disco ** Also affects: apport Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1815862 Title: test bug Status in Apport: New Status in apport package in Ubuntu: New Bug description: test bug ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: apport 2.20.10-0ubuntu20 ProcVersionSignature: Ubuntu 4.19.0-12.13-generic 4.19.18 Uname: Linux 4.19.0-12-generic x86_64 ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CrashReports: 640:1000:119:4491999:2019-02-14 11:28:54.686578636 +0600:2019-02-14 11:34:26.810664197 +0600:/var/crash/_usr_bin_gnome-control-center.1000.crash CurrentDesktop: ubuntu:GNOME Date: Thu Feb 14 12:53:06 2019 InstallationDate: Installed on 2019-02-14 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: apport UpgradeStatus: Upgraded to disco on 2019-02-14 (0 days ago) mtime.conffile..etc.default.apport: 2019-02-14T12:51:16.243720 To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815862/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] Re: binutils 2.32 update breaks debug symbols in disco
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: binutils (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in Apport: New Status in binutils package in Ubuntu: Confirmed Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1808611] Re: chamelon
[Expired for iputils (Ubuntu) because there has been no activity for 60 days.] ** Changed in: iputils (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to iputils in Ubuntu. https://bugs.launchpad.net/bugs/1808611 Title: chamelon Status in iputils package in Ubuntu: Expired Bug description: export PATH=$PATH:/data/user/0/burrows.apps.busybox/app_busybox; export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/data/user/0/burrows.apps.busybox/app_busybox To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/iputils/+bug/1808611/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814613] Re: qmlscene -style material file.qml says "QApplication: invalid style override passed"
Upstream bug: https://bugreports.qt.io/browse/QTBUG-73818 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtdeclarative-opensource- src in Ubuntu. https://bugs.launchpad.net/bugs/1814613 Title: qmlscene -style material file.qml says "QApplication: invalid style override passed" Status in qtdeclarative-opensource-src package in Ubuntu: New Bug description: qmlscene -qt=5 -style material file.qml prints QApplication: invalid style override passed, ignoring it. on the terminal. This does not happen when using the environment variable method, e.g. QT_QUICK_CONTROLS_STYLE=material qmlscene -qt=5 file.qml The documentation for how this is supposed to work is at https://doc.qt.io/qt-5/qtquickcontrols2-styles.html#using-styles-in-qt-quick-controls-2 I'm reporting this to ubuntu because it might be due to packaging or patching done for Ubuntu. I can not conveniently try a pristine upstream version of Qt, so hoping the Qt Ubuntu maintainer can quickly determine if this is an upstream bug or not. I'll attach a trivial test file which demonstrates the problem STEPS TO REPRODUCE: qmlscene -style material test.qml # test.qml attached ACTUAL RESULTS: Prints warning about invalid style on the terminal EXPECTED RESULTS: Silent obedience To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtdeclarative-opensource-src/+bug/1814613/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1598814] Re: tracker-miner-fs syslog spam: Could not execute sparql
Almost one year and zillion of logs entries later, has anyone got any clue if this will be fixed? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to tracker in Ubuntu. https://bugs.launchpad.net/bugs/1598814 Title: tracker-miner-fs syslog spam: Could not execute sparql Status in tracker package in Ubuntu: Confirmed Bug description: I noticed tracker-miner-fs spamming syslog on every reboot. Because there are too many messages i created a github gist at https://gist.github.com/CrazyLemon/14a54c58efcd0839a4e990a49da9b303 As you can see thats a lot of messages. I'm on Ubuntu 16.04 with latest updates. ii tracker-miner-fs 1.6.2-0ubuntu1amd64 metadata database, indexer and search tool - filesystem indexer This kind of syslog spamming has been happening at least since june 27th '16. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/tracker/+bug/1598814/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1732530] Re: Dejadup is not working b/c duplicity is not installed
** Changed in: ubuntukylin-meta (Ubuntu) Status: New => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/1732530 Title: Dejadup is not working b/c duplicity is not installed Status in ubuntu-mate: Invalid Status in deja-dup package in Ubuntu: Won't Fix Status in ubuntu-mate-meta package in Ubuntu: Fix Released Status in ubuntu-meta package in Ubuntu: Won't Fix Status in ubuntukylin-meta package in Ubuntu: Won't Fix Bug description: Ubuntu Mate 17.10 Dejadup is not working b/c duplicity is not installed. After a manual install, Deja-Dup works as expected. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1732530/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1812474] Re: /usr/lib/evolution/evolution-addressbook-factory regularly takes 100% CPU and 100% RAM for a while, making all the system unresponsive
Deleting seems only required if the migration fail. We are going to update ews, maybe you can keep your system is the buggy state and test if that update resolves the problem for you? ** Changed in: evolution-data-server (Ubuntu) Status: Incomplete => New ** Changed in: evolution-data-server (Ubuntu) Status: New => In Progress ** Package changed: evolution-data-server (Ubuntu) => evolution-ews (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to evolution-data-server in Ubuntu. https://bugs.launchpad.net/bugs/1812474 Title: /usr/lib/evolution/evolution-addressbook-factory regularly takes 100% CPU and 100% RAM for a while, making all the system unresponsive Status in evolution-ews package in Ubuntu: In Progress Bug description: /usr/lib/evolution/evolution-addressbook-factory regularly takes 100% CPU and 100% RAM for a while, making all the system unresponsive; the GUI doesn't respond (gnome-shell's clock is stopped, the mouse pointer is stopped) and it lasts for a few minutes, then goes back to normal. If I wait long enough, the addressbook crashes (not enough memory ?). ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: evolution-data-server 3.30.1-1build1 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: GNOME Date: Sat Jan 19 09:59:18 2019 ExecutablePath: /usr/lib/evolution/evolution-data-server/evolution-alarm-notify InstallationDate: Installed on 2017-01-09 (740 days ago) InstallationMedia: Ubuntu-GNOME 16.10 "Yakkety Yak" - Release amd64 (20161012.1) ProcEnviron: PATH=(custom, user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: evolution-data-server UpgradeStatus: Upgraded to cosmic on 2018-10-19 (92 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution-ews/+bug/1812474/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815317] Re: Update gnome-online-accounts to 3.31.90
** Changed in: gnome-online-accounts (Ubuntu) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1815317 Title: Update gnome-online-accounts to 3.31.90 Status in gnome-online-accounts package in Ubuntu: Fix Committed Bug description: We should update gnome-online-accounts to 3.31.90 (Debian experimental has the update). GNOME has dropped its .png icons and replaced them with 128px .svg's. If we did the same, we could drop our binary patch since an .svg isn't a binary file. GNOME also includes a 16px symbolic .svg but I don't think those are used right now. So although getting the 128px .svg from Canonical Design isn't technically a blocker, I think it would be nice to get it for consistency (and simplifying our patches a bit). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-online-accounts/+bug/1815317/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1813131] Re: i965_drv_video.so doesn't load any more if a Wayland server is present [failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbo
Is a newer intel-vaapi-driver package planed? (- currently in Debian Sid & does fix the issue in a wayland session.. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libva in Ubuntu. https://bugs.launchpad.net/bugs/1813131 Title: i965_drv_video.so doesn't load any more if a Wayland server is present [failed to resolve wl_drm_interface(): /lib/x86_64-linux- gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface] Status in intel-vaapi-driver package in Ubuntu: Confirmed Status in libva package in Ubuntu: Fix Released Bug description: If a Wayland server is present (anywhere on the system including even the gdm3 login screen) then i965_drv_video.so fails to initialize: $ vainfo libva info: VA-API version 1.3.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_1_2 error: failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed libva info: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit $ mpv bbb_sunflower_2160p_60fps_normal.mp4 Playing: bbb_sunflower_2160p_60fps_normal.mp4 (+) Video --vid=1 (*) (h264 3840x2160 60.000fps) (+) Audio --aid=1 (*) (mp3 2ch 48000Hz) Audio --aid=2 (*) (ac3 6ch 48000Hz) File tags: Artist: Blender Foundation 2008, Janus Bager Kristensen 2013 Comment: Creative Commons Attribution 3.0 - http://bbb3d.renderfarming.net Composer: Sacha Goedegebure Genre: Animation Title: Big Buck Bunny, Sunflower version error: failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface [vaapi] libva: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed Meanwhile, it continues to work after you have logged into a Xorg session. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: i965-va-driver 2.2.0-0ubuntu1 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu19 Architecture: amd64 Date: Thu Jan 24 16:54:21 2019 InstallationDate: Installed on 2018-12-04 (51 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20181203) SourcePackage: intel-vaapi-driver UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/intel-vaapi-driver/+bug/1813131/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] Re: binutils 2.32 update breaks debug symbols in disco
The pointed commit is in 2.32 (see https://sourceware.org/bugzilla/show_bug.cgi?id=23919 for details) but that seems not enough since the disco-proposed version seems to not fix the issue from local testing ** Bug watch added: Sourceware.org Bugzilla #23919 https://sourceware.org/bugzilla/show_bug.cgi?id=23919 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in Apport: New Status in binutils package in Ubuntu: New Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] Re: binutils 2.32 update breaks debug symbols in disco
** Changed in: binutils (Ubuntu) Status: In Progress => New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in Apport: New Status in binutils package in Ubuntu: New Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] Re: binutils 2.32 update breaks debug symbols in disco
** Changed in: binutils (Ubuntu) Assignee: Canonical Foundations Team (canonical-foundations) => (unassigned) ** Changed in: binutils (Ubuntu) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in Apport: New Status in binutils package in Ubuntu: New Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1688018] Re: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6
The author discusses the drawbacks here: https://github.com/jonathanio /update-systemd-resolved (one can still leak under certain circumstances, and we shouldn't only be concerned with the minority who realize this is even happening/a problem and who can hack together a workaround themselves). Not that you implied that by sharing your solution; I'm just speaking generally. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1688018 Title: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6 Status in network-manager package in Ubuntu: Triaged Status in network-manager source package in Xenial: In Progress Status in network-manager source package in Yakkety: Won't Fix Bug description: This was initially opened as #1671606 then later duped to #1639776. Discussion in #1639776 indicate that we need new bug for this so I am opening one ... Please don't mark this as duplicate to #1639776 or other similar bug report. We already lost several months and we are again at beginning ... TL;DR; -> network-manager-1.2.2-0ubuntu0.16.04.4 use DNS defined by VPN (correct). network-manager-1.2.6-0ubuntu0.16.04.1 use DNS from DHCP instead of one defined by VPN (wrong). DNS resolver should query only DNS servers defined by VPN while connection is active. = Test steps / result: - upgraded network-manager to 1.2.6-0ubuntu0.16.04.1 (dnsmasq-base-2.75-1ubuntu0.16.04.2) - restated my laptop to ensure clean start - connected to VPN using openconnect / network-manager-openconnect-gnome Observed results -> DNS queries are forwarded only to DNS servers defined by LAN connection (this is wrong / connection not working at all) - "killall dnsmasq" - dnsmasq get automatically restarted by system Observed results -> most of the the queries are forwarded to DNS servers defined by VPN, but lot of queries get forwarded to DNS servers defined by LAN connection (this is still wrong / DNS leaks, attacker can hijack connection even if VPN is enabled) - I downgraded back network-manager to 1.2.2-0ubuntu0.16.04.4 (dnsmasq-base stay same) - restated my laptop to ensure clean test - connected to same VPN using openconnect Observed results -> DNS queries are forwarded only to DNS servers defined by VPN connection. There are no leaks to LAN DNS server (this is correct behavior). = Paul Smith requested additional details in #1639776. Here are: * If you're using IPv4 vs. IPv6 -> IPv4 only. I have IPv6 set to ignore on all network definition (lan / wifi /vpn) * If you have checked or unchecked the "Use this connection only for resources on its network" -> unchecked on all nw definition * If you have this checked, try unchecking it and see if that makes a difference -> no change if I toggle this option. Behavior is same. * When you say "DNS lookups" please be clear about whether the hostnames being looked up are public (e.g., www.google.com or whatever), on your local LAN, or in the network accessed via the VPN. Does it make a difference which one you choose? -> No difference. * Are you using fully-qualified hostnames, or relying on the DNS domain search path? Does it make a difference if you do it differently? -> I normaly use FQDN due to nature of HTTPs cert validation. I don't see difference when I try same using hostname + domain search. = I am using openconnect (cisco) and openvpn. Test result are by using openconnect but I saw same behaviour also while using openvpn. = Thanks Lukas To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1688018/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814925] Re: Bluetooth mouse stops responding after extended deep sleep
Dell OEM image with updated kernel has the qca\qca6174 fix. I reloaded the dell image and have not been able to reproduce this issue with LE BT mouses. I will let it run and confirm. So it looks like the issue is just with the generic image not dell image. non-oem. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1814925 Title: Bluetooth mouse stops responding after extended deep sleep Status in bluez package in Ubuntu: Confirmed Bug description: Tested on Dell XPS 9370, Ubuntu 18.04 Dell OEM iso Bluetooth mouse tested with HP X4b BT Last mouse stops responding after long extended deep sleep (24-48 hours). Bluetooth settings window which initially reported Bluetooth as connected now shows disconnected. Pushing the button within the settings window to reconnect takes me back to off. Switching back to on and off keeps bringing me back to off unless I reboot the device and or turn off the mouse via the underneath portion of the BT device. Demsg logs shows an extremely large number of "Bluetooth: hci:0 last event is not cmd complete (0x0f)" Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Package: bluez 5.48-0ubuntu3.1 XPS 13 9370 bios 1.6.3 ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: bluez 5.48-0ubuntu3.1 ProcVersionSignature: Ubuntu 4.15.0-45.48-generic 4.15.18 Uname: Linux 4.15.0-45-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 Date: Wed Feb 6 10:16:07 2019 InstallationDate: Installed on 2019-01-03 (33 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) InterestingModules: rfcomm bnep btusb bluetooth MachineType: Dell Inc. XPS 13 9370 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-generic root=UUID=9a57d978-48d7-4ef3-9f67-5e6b72107fcf ro mem_sleep_default=deep initrdefi /acpi_override quiet splash vt.handoff=1 SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/04/2018 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.6.3 dmi.board.name: 0H0VG3 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.6.3:bd11/04/2018:svnDellInc.:pnXPS139370:pvr:rvnDellInc.:rn0H0VG3:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9370 dmi.sys.vendor: Dell Inc. hciconfig: hci0:Type: Primary Bus: USB BD Address: 9C:B6:D0:90:A0:16 ACL MTU: 1024:8 SCO MTU: 50:8 UP RUNNING PSCAN ISCAN RX bytes:748157 acl:263 sco:0 events:22281 errors:0 TX bytes:15577 acl:124 sco:0 commands:1167 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1814925/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814506] Re: Use nemo-desktop to draw desktop icons under Unity (Disco)
** Merge proposal linked: https://code.launchpad.net/~khurshid-alam/ubuntu/+source/gnome-session/+git/gnome-session/+merge/363153 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu. https://bugs.launchpad.net/bugs/1814506 Title: Use nemo-desktop to draw desktop icons under Unity (Disco) Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-themes package in Ubuntu: Fix Released Status in unity package in Ubuntu: Fix Released Bug description: As nautilus > 3.30 is now uploaded in Ubuntu 19.10, it doesn't have the desktop any more. The alternate options are to use caja-desktop or nemo-desktop keeping nautilus default file manger for now. Since nemo- desktop does not require any extensive patching it is easy to use under unity. Nemo-desktop will only draw the icons, not the background. In absence of nautilus unity-settings-daemon draws the background, so nothing to do in u-s-d. There are few small patches (nemo action files) required from nemo. @fossfreedom (ubuntu-budgie-dev) suggested that it's better that we ship these action files ourselves as recommended by upstream. Budgie is doing the same. https://github.com/UbuntuBudgie/budgie-desktop-environment/tree/master/nemo-actions Since nautilus still be default file-manager we disable auto-mount with nemo and various other cinnamon/nemo option in ubuntu-settings.gsettings-override To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/1814506/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440381] Re: please build bindings for Python3
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: talloc (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to tdb in Ubuntu. https://bugs.launchpad.net/bugs/1440381 Title: please build bindings for Python3 Status in ldb package in Ubuntu: Confirmed Status in samba package in Ubuntu: Triaged Status in talloc package in Ubuntu: Confirmed Status in tdb package in Ubuntu: Fix Released Status in samba package in Debian: New Bug description: There is still the goal to remove Python2 from the desktop images, and to use Python3 only. please build bindings for Python3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ldb/+bug/1440381/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440381] Re: please build bindings for Python3
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ldb (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to tdb in Ubuntu. https://bugs.launchpad.net/bugs/1440381 Title: please build bindings for Python3 Status in ldb package in Ubuntu: Confirmed Status in samba package in Ubuntu: Triaged Status in talloc package in Ubuntu: Confirmed Status in tdb package in Ubuntu: Fix Released Status in samba package in Debian: New Bug description: There is still the goal to remove Python2 from the desktop images, and to use Python3 only. please build bindings for Python3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ldb/+bug/1440381/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] Re: binutils 2.32 update breaks debug symbols in disco
An example of apport's behavior in this situation can be found in https://bugs.launchpad.net/ubuntu/+source/gnome-control- center/+bug/1815703. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in Apport: New Status in binutils package in Ubuntu: New Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] Re: binutils 2.32 update breaks debug symbols in disco
The retracers do not treat this as a failure because apport returns 0 when retracing the crash and that's because gdb also returns 0 as I believe this is just a warning from gdb. That being said there is no record of this failure in the retracers and it would not have been noticed if not for seb128, so there is some room for improvement in how the retracers / apport handle this situation. ** Also affects: apport Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in Apport: New Status in binutils package in Ubuntu: New Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/apport/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1776173] Re: qt print dialog shipped with bionic ignores printer defaults
Hi Dmitry, thanks for your message and the work as volunteers on Qt packaging. My message was merely to know if there was any need for a specific bug item about the backporting and it is great to hear that you were already planning the backport! Also, great to hear that 19.04 is going to get the Qt LTS. Reproducing the duplex issue is very easy. 1) Install a printer that can duplex and configure it to do duplex with long-edge binding from the printer setup dialog. 2) Open a PDF with okular, and open the print dialog. Select the printer above. 3) Press the "Options" button to enlarge the dialog to also present the options. Select the "options" tab, right of "copies". Verify that Duplex Printing is preset to "None" This is wrong, because the printer was configured to do duplex with long-edge binding. 4) Print and close okular. 5) Reopen okular (with the same or another PDF file). Open again the print dialog and select the same printer. 6) Redo 3). Again see that Duplex Printing is preset to "None", instead of being at the default or at the previously used setup. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtbase-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1776173 Title: qt print dialog shipped with bionic ignores printer defaults Status in qtbase-opensource-src package in Ubuntu: Fix Released Status in qtbase-opensource-src source package in Bionic: New Status in qtbase-opensource-src source package in Cosmic: New Bug description: All kde applications shipped with ubuntu and particularly kubuntu bionic print via the qt print dialog, that, unfortunately, does not seem to respect the defaults set for the printer. Specifically, every time one starts to print the "duplex" option gets reset to "none" even for those printers that were configured for "long edge" duplex by default. This may lead to a huge *waste of paper*: people print, expecting the duplex, do not get it, throw away the printout and reprint, for a total of 3 times the paper usage if the print dialog respected the default. See also https://bugs.kde.org/show_bug.cgi?id=395150 As a final comment and in general, I think that Bionic should be updated to use the QT 5.11 print subsystem (from 5.9.5) as soon as possible (at least via a kubuntu ppa). The QT 5 print dialog has always been extremely poor, with no possibility to provide information about things like print quality and resolution, paper type, stapling (for printers supporting it), etc. Now, QT 5.11 has finally a better print dialog and it would be great if the bionic users could use it. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: libqt5widgets5 5.9.5+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE Date: Mon Jun 11 10:23:53 2018 EcryptfsInUse: Yes InstallationDate: Installed on 2013-12-12 (1641 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: qtbase-opensource-src UpgradeStatus: Upgraded to bionic on 2018-06-08 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1776173/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815317] Re: Update gnome-online-accounts to 3.31.90
** Merge proposal linked: https://code.launchpad.net/~azzar1/ubuntu/+source/gnome-online-accounts/+git/gnome-online-accounts/+merge/363144 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1815317 Title: Update gnome-online-accounts to 3.31.90 Status in gnome-online-accounts package in Ubuntu: In Progress Bug description: We should update gnome-online-accounts to 3.31.90 (Debian experimental has the update). GNOME has dropped its .png icons and replaced them with 128px .svg's. If we did the same, we could drop our binary patch since an .svg isn't a binary file. GNOME also includes a 16px symbolic .svg but I don't think those are used right now. So although getting the 128px .svg from Canonical Design isn't technically a blocker, I think it would be nice to get it for consistency (and simplifying our patches a bit). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-online-accounts/+bug/1815317/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1812474] Re: /usr/lib/evolution/evolution-addressbook-factory regularly takes 100% CPU and 100% RAM for a while, making all the system unresponsive
The bug was apparently a dupe of https://gitlab.gnome.org/GNOME/evolution-ews/issues/18 and should be fixed in "3.30.2+". However if I understood correctly if I already have a crashing addressbook, even with the bugfix it will keep on crashing unless I manually delete the cache file buried somewhere in $HOME/.cache/evolution/ - which is not very user-friendly ... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to evolution-data-server in Ubuntu. https://bugs.launchpad.net/bugs/1812474 Title: /usr/lib/evolution/evolution-addressbook-factory regularly takes 100% CPU and 100% RAM for a while, making all the system unresponsive Status in evolution-data-server package in Ubuntu: Incomplete Bug description: /usr/lib/evolution/evolution-addressbook-factory regularly takes 100% CPU and 100% RAM for a while, making all the system unresponsive; the GUI doesn't respond (gnome-shell's clock is stopped, the mouse pointer is stopped) and it lasts for a few minutes, then goes back to normal. If I wait long enough, the addressbook crashes (not enough memory ?). ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: evolution-data-server 3.30.1-1build1 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: GNOME Date: Sat Jan 19 09:59:18 2019 ExecutablePath: /usr/lib/evolution/evolution-data-server/evolution-alarm-notify InstallationDate: Installed on 2017-01-09 (740 days ago) InstallationMedia: Ubuntu-GNOME 16.10 "Yakkety Yak" - Release amd64 (20161012.1) ProcEnviron: PATH=(custom, user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: evolution-data-server UpgradeStatus: Upgraded to cosmic on 2018-10-19 (92 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1812474/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815317] Re: Update gnome-online-accounts to 3.31.90
** Changed in: gnome-online-accounts (Ubuntu) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gnome-online-accounts in Ubuntu. https://bugs.launchpad.net/bugs/1815317 Title: Update gnome-online-accounts to 3.31.90 Status in gnome-online-accounts package in Ubuntu: In Progress Bug description: We should update gnome-online-accounts to 3.31.90 (Debian experimental has the update). GNOME has dropped its .png icons and replaced them with 128px .svg's. If we did the same, we could drop our binary patch since an .svg isn't a binary file. GNOME also includes a 16px symbolic .svg but I don't think those are used right now. So although getting the 128px .svg from Canonical Design isn't technically a blocker, I think it would be nice to get it for consistency (and simplifying our patches a bit). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-online-accounts/+bug/1815317/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814506] Re: Use nemo-desktop to draw desktop icons under Unity (Disco)
This bug was fixed in the package ubuntu-themes - 19.04-0ubuntu1 --- ubuntu-themes (19.04-0ubuntu1) disco; urgency=medium [ Khurshid Alam ] * Don't use icon hover bg color on nemo desktop (LP: #1814506) -- Didier Roche Wed, 13 Feb 2019 15:45:56 +0100 ** Changed in: ubuntu-themes (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu. https://bugs.launchpad.net/bugs/1814506 Title: Use nemo-desktop to draw desktop icons under Unity (Disco) Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-themes package in Ubuntu: Fix Released Status in unity package in Ubuntu: Fix Released Bug description: As nautilus > 3.30 is now uploaded in Ubuntu 19.10, it doesn't have the desktop any more. The alternate options are to use caja-desktop or nemo-desktop keeping nautilus default file manger for now. Since nemo- desktop does not require any extensive patching it is easy to use under unity. Nemo-desktop will only draw the icons, not the background. In absence of nautilus unity-settings-daemon draws the background, so nothing to do in u-s-d. There are few small patches (nemo action files) required from nemo. @fossfreedom (ubuntu-budgie-dev) suggested that it's better that we ship these action files ourselves as recommended by upstream. Budgie is doing the same. https://github.com/UbuntuBudgie/budgie-desktop-environment/tree/master/nemo-actions Since nautilus still be default file-manager we disable auto-mount with nemo and various other cinnamon/nemo option in ubuntu-settings.gsettings-override To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/1814506/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815523] Re: The last MESA updates (02/07/19) corrupted output to DisplayLink
Okay, my mistake... -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1815523 Title: The last MESA updates (02/07/19) corrupted output to DisplayLink Status in mesa package in Ubuntu: Incomplete Bug description: Prior to Thursday's "update" from Bionic-Proposed, the MESA was working fine; afterwards, gameplay on STEAM has become choppy and staccato; secondary display via a USB-C through DisplayPort UD3900 (Pluggable) is completely corrupted. See attached picture. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7:ubuntu Date: Mon Feb 11 16:50:58 2019 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: acpi-call, 1.1.0, 4.18.0-15-generic, x86_64: installedError! Could not locate dkms.conf file. File: does not exist. ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Device [8086:3ea0] (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:1323] InstallationDate: Installed on 2019-01-15 (27 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: System76 Galago Pro ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/05/2018 dmi.bios.vendor: INSYDE Corp. dmi.bios.version: 1.07.03 dmi.board.asset.tag: Tag 12345 dmi.board.name: Galago Pro dmi.board.vendor: System76 dmi.board.version: galp3-c dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: System76 dmi.chassis.version: galp3-c dmi.modalias: dmi:bvnINSYDECorp.:bvr1.07.03:bd12/05/2018:svnSystem76:pnGalagoPro:pvrgalp3-c:rvnSystem76:rnGalagoPro:rvrgalp3-c:cvnSystem76:ct10:cvrgalp3-c: dmi.product.family: Not Applicable dmi.product.name: Galago Pro dmi.product.sku: Not Applicable dmi.product.version: galp3-c dmi.sys.vendor: System76 version.compiz: compiz 1:0.9.13.1+18.04.20180302-0ubuntu1 version.libdrm2: libdrm2 2.4.95-1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.8-0ubuntu0~18.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.8-0ubuntu0~18.04.2 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1815523/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1688018] Re: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6
For those using OpenVPN, I discovered that there is a package named 'openvpn-systemd-resolvd' that finally resolved this issue for me. Here's the synopsis for the package in the repo... "This is a helper script designed to integrate OpenVPN with the systemd-resolved service via DBus instead of trying to override /etc/resolv.conf, or manipulate systemd-networkd configuration files. Since systemd-229, the systemd-resolved service has an API available via DBus which allows directly setting the DNS configuration for a link. This script makes use of busctl from systemd to send DBus messages to systemd-resolved to update the DNS for the link created by OpenVPN." -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1688018 Title: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6 Status in network-manager package in Ubuntu: Triaged Status in network-manager source package in Xenial: In Progress Status in network-manager source package in Yakkety: Won't Fix Bug description: This was initially opened as #1671606 then later duped to #1639776. Discussion in #1639776 indicate that we need new bug for this so I am opening one ... Please don't mark this as duplicate to #1639776 or other similar bug report. We already lost several months and we are again at beginning ... TL;DR; -> network-manager-1.2.2-0ubuntu0.16.04.4 use DNS defined by VPN (correct). network-manager-1.2.6-0ubuntu0.16.04.1 use DNS from DHCP instead of one defined by VPN (wrong). DNS resolver should query only DNS servers defined by VPN while connection is active. = Test steps / result: - upgraded network-manager to 1.2.6-0ubuntu0.16.04.1 (dnsmasq-base-2.75-1ubuntu0.16.04.2) - restated my laptop to ensure clean start - connected to VPN using openconnect / network-manager-openconnect-gnome Observed results -> DNS queries are forwarded only to DNS servers defined by LAN connection (this is wrong / connection not working at all) - "killall dnsmasq" - dnsmasq get automatically restarted by system Observed results -> most of the the queries are forwarded to DNS servers defined by VPN, but lot of queries get forwarded to DNS servers defined by LAN connection (this is still wrong / DNS leaks, attacker can hijack connection even if VPN is enabled) - I downgraded back network-manager to 1.2.2-0ubuntu0.16.04.4 (dnsmasq-base stay same) - restated my laptop to ensure clean test - connected to same VPN using openconnect Observed results -> DNS queries are forwarded only to DNS servers defined by VPN connection. There are no leaks to LAN DNS server (this is correct behavior). = Paul Smith requested additional details in #1639776. Here are: * If you're using IPv4 vs. IPv6 -> IPv4 only. I have IPv6 set to ignore on all network definition (lan / wifi /vpn) * If you have checked or unchecked the "Use this connection only for resources on its network" -> unchecked on all nw definition * If you have this checked, try unchecking it and see if that makes a difference -> no change if I toggle this option. Behavior is same. * When you say "DNS lookups" please be clear about whether the hostnames being looked up are public (e.g., www.google.com or whatever), on your local LAN, or in the network accessed via the VPN. Does it make a difference which one you choose? -> No difference. * Are you using fully-qualified hostnames, or relying on the DNS domain search path? Does it make a difference if you do it differently? -> I normaly use FQDN due to nature of HTTPs cert validation. I don't see difference when I try same using hostname + domain search. = I am using openconnect (cisco) and openvpn. Test result are by using openconnect but I saw same behaviour also while using openvpn. = Thanks Lukas To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1688018/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815523] Re: The last MESA updates (02/07/19) corrupted output to DisplayLink
that's the HWE kernel, not 4.15 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1815523 Title: The last MESA updates (02/07/19) corrupted output to DisplayLink Status in mesa package in Ubuntu: Incomplete Bug description: Prior to Thursday's "update" from Bionic-Proposed, the MESA was working fine; afterwards, gameplay on STEAM has become choppy and staccato; secondary display via a USB-C through DisplayPort UD3900 (Pluggable) is completely corrupted. See attached picture. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7:ubuntu Date: Mon Feb 11 16:50:58 2019 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: acpi-call, 1.1.0, 4.18.0-15-generic, x86_64: installedError! Could not locate dkms.conf file. File: does not exist. ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Device [8086:3ea0] (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:1323] InstallationDate: Installed on 2019-01-15 (27 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: System76 Galago Pro ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/05/2018 dmi.bios.vendor: INSYDE Corp. dmi.bios.version: 1.07.03 dmi.board.asset.tag: Tag 12345 dmi.board.name: Galago Pro dmi.board.vendor: System76 dmi.board.version: galp3-c dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: System76 dmi.chassis.version: galp3-c dmi.modalias: dmi:bvnINSYDECorp.:bvr1.07.03:bd12/05/2018:svnSystem76:pnGalagoPro:pvrgalp3-c:rvnSystem76:rnGalagoPro:rvrgalp3-c:cvnSystem76:ct10:cvrgalp3-c: dmi.product.family: Not Applicable dmi.product.name: Galago Pro dmi.product.sku: Not Applicable dmi.product.version: galp3-c dmi.sys.vendor: System76 version.compiz: compiz 1:0.9.13.1+18.04.20180302-0ubuntu1 version.libdrm2: libdrm2 2.4.95-1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.8-0ubuntu0~18.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.8-0ubuntu0~18.04.2 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1815523/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1758736] Re: [USB-Audio - SteelSeries Arctis 7, playback] No stereo playback only mono playback
I uploaded the changes to disco this morning. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1758736 Title: [USB-Audio - SteelSeries Arctis 7, playback] No stereo playback only mono playback Status in pulseaudio package in Ubuntu: In Progress Status in pulseaudio source package in Bionic: In Progress Status in pulseaudio source package in Cosmic: In Progress Status in pulseaudio source package in Disco: In Progress Bug description: [Impact] * User is only able to get mono audio from steelseries headsets because they provide both a stereo and mono output. PA selects the mono output by default. * This should be backported to stable releases because this fix is isolated to code that only applies to the affected headsets. Additionally other gaming headsets may be more easily enabled by adding ATTRS{idVendor}=="", ATTRS{idProduct}=="", ENV{PULSE_PROFILE_SET}="steelseries-arctis-7-usb-audio.conf" to /lib/udev/rules.d/90-pulseaudio.rules now. Such as the Lucidsound LS31 which I own. * The upload fixes the bug by conditionally setting a pulseaudio profile for the headset based on specific usb vendor and product ids in the udev rules. [Test Case] 1. Acquire headset. 2. Open sound settings, and click test speakers. 3. Only option available will be mono sound [Regression Potential] * Risk of regressions should be mitigated to those who own the headset. In which case it is likely that their headset is already not working. [Other Info] * All patches originate from upstream pulseaudio, and are documented as such including the shas. * I will be pursuing enabling other similar headsets in the coming weeks. * I plan to work with upstream pulseaudio to enable my own headset and to also make the headset templates backported here more generic. Original Description - There is not stereo playback only mono playback ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: pulseaudio 1:10.0-2ubuntu3.1 ProcVersionSignature: Ubuntu 4.13.0-37.42-generic 4.13.13 Uname: Linux 4.13.0-37-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC1D0p: kaj1755 F...m pulseaudio /dev/snd/controlC1: kaj1755 F pulseaudio /dev/snd/pcmC0D0c: kaj1755 F...m pulseaudio /dev/snd/controlC0: kaj1755 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Sun Mar 25 21:30:50 2018 InstallationDate: Installed on 2018-03-08 (17 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:S7 successful Symptom_Card: SteelSeries Arctis 7 - SteelSeries Arctis 7 Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [USB-Audio - SteelSeries Arctis 7, playback] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/09/2016 dmi.bios.vendor: LENOVO dmi.bios.version: R06ET35W (1.09 ) dmi.board.asset.tag: Not Available dmi.board.name: 20FMS2AV00 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrR06ET35W(1.09):bd03/09/2016:svnLENOVO:pn20FMS2AV00:pvrThinkPadT460:rvnLENOVO:rn20FMS2AV00:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T460 dmi.product.name: 20FMS2AV00 dmi.product.version: ThinkPad T460 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1758736/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815774] [NEW] binutils 2.32 update breaks debug symbols in disco
Public bug reported: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae ** Affects: binutils (Ubuntu) Importance: High Assignee: Canonical Foundations Team (canonical-foundations) Status: New ** Tags: rls-dd-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to binutils in Ubuntu. https://bugs.launchpad.net/bugs/1815774 Title: binutils 2.32 update breaks debug symbols in disco Status in binutils package in Ubuntu: New Bug description: Recently retracing started failing in disco, that seems to be due to the binutils 2.32 update example $ gdb gnome-control-center ... Reading symbols from gnome-control-center...BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges BFD: /usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug: unable to initialize decompress status for section .debug_aranges warning: File "/usr/lib/debug/.build-id/2a/4367ded6c5ba5f464c762f1576874694053c71.debug" has no build-id, file skipped (no debugging symbols found)...done. Rebuilding the package with binutils 2.31 installed fixes the issue. Googling for the warning lead to an arch bug pointing out that upstream commit as fixing the issue https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=5f6c22ae To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/1815774/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814506] Re: Use nemo-desktop to draw desktop icons under Unity (Disco)
** Branch linked: lp:ubuntu-themes -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-themes in Ubuntu. https://bugs.launchpad.net/bugs/1814506 Title: Use nemo-desktop to draw desktop icons under Unity (Disco) Status in ubuntu-settings package in Ubuntu: New Status in ubuntu-themes package in Ubuntu: New Status in unity package in Ubuntu: Fix Released Bug description: As nautilus > 3.30 is now uploaded in Ubuntu 19.10, it doesn't have the desktop any more. The alternate options are to use caja-desktop or nemo-desktop keeping nautilus default file manger for now. Since nemo- desktop does not require any extensive patching it is easy to use under unity. Nemo-desktop will only draw the icons, not the background. In absence of nautilus unity-settings-daemon draws the background, so nothing to do in u-s-d. There are few small patches (nemo action files) required from nemo. @fossfreedom (ubuntu-budgie-dev) suggested that it's better that we ship these action files ourselves as recommended by upstream. Budgie is doing the same. https://github.com/UbuntuBudgie/budgie-desktop-environment/tree/master/nemo-actions Since nautilus still be default file-manager we disable auto-mount with nemo and various other cinnamon/nemo option in ubuntu-settings.gsettings-override To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-settings/+bug/1814506/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1776173] Re: qt print dialog shipped with bionic ignores printer defaults
Hi Robert and Sergio! Sorry for the delay with fixing this. In Qt packaging team, we are all volunteers and work in our free time. Initially I hoped that one of my co-maintainers would take care of this issue, but looks like they also didn’t have time, so I fixed it myself for the development release. I will look at backporting this change to Bionic and Cosmic soon. Note that I applied only Robert’s patch that fixes duplex printing. For Ubuntu 19.04 we are going to ship Qt 5.12, which should have much better printing experience. If there are other patches that can be backported, please let me know. Also, if one of you adds a test case (steps to reproduce) for the duplex issue to the bug description, it will speed up the stable update a bit. ** Also affects: qtbase-opensource-src (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: qtbase-opensource-src (Ubuntu Bionic) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtbase-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1776173 Title: qt print dialog shipped with bionic ignores printer defaults Status in qtbase-opensource-src package in Ubuntu: Fix Released Status in qtbase-opensource-src source package in Bionic: New Status in qtbase-opensource-src source package in Cosmic: New Bug description: All kde applications shipped with ubuntu and particularly kubuntu bionic print via the qt print dialog, that, unfortunately, does not seem to respect the defaults set for the printer. Specifically, every time one starts to print the "duplex" option gets reset to "none" even for those printers that were configured for "long edge" duplex by default. This may lead to a huge *waste of paper*: people print, expecting the duplex, do not get it, throw away the printout and reprint, for a total of 3 times the paper usage if the print dialog respected the default. See also https://bugs.kde.org/show_bug.cgi?id=395150 As a final comment and in general, I think that Bionic should be updated to use the QT 5.11 print subsystem (from 5.9.5) as soon as possible (at least via a kubuntu ppa). The QT 5 print dialog has always been extremely poor, with no possibility to provide information about things like print quality and resolution, paper type, stapling (for printers supporting it), etc. Now, QT 5.11 has finally a better print dialog and it would be great if the bionic users could use it. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: libqt5widgets5 5.9.5+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE Date: Mon Jun 11 10:23:53 2018 EcryptfsInUse: Yes InstallationDate: Installed on 2013-12-12 (1641 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: qtbase-opensource-src UpgradeStatus: Upgraded to bionic on 2018-06-08 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1776173/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815129] Re: apt segfaults when generating cache file
** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815129 Title: apt segfaults when generating cache file Status in apt package in Ubuntu: Fix Released Status in apt source package in Trusty: Fix Committed Status in apt package in Debian: Fix Released Bug description: [Impact] apt crashes (core dump) during cache creation [Description] When executing apt-cache several times on a memory constrained system, apt-cache can sometimes crash with a core dump file. This is related to mmap() failing allocations during cache generation, according to an upstream bug report (803417). There is an upstream patch for this bug (6789e01e do not segfault in cache generation on mmap failure) and it's included in the apt package for other series (see below), so we only need to backport it to Trusty. Upstream commit: https://salsa.debian.org/apt- team/apt/commit/6789e01e9370b3b7f65d52138c5657eaa712b4d1 $ git describe --contains 6789e01e9370 1.1_exp16~5 $ rmadison apt apt | 1.0.1ubuntu2| trusty | source, ... apt | 1.0.1ubuntu2.19 | trusty-security | source, ... apt | 1.0.1ubuntu2.19 | trusty-updates | source, ... apt | 1.2.10ubuntu1 | xenial | source, ... apt | 1.6.1 | bionic | source, ... apt | 1.7.0 | cosmic | source, ... apt | 1.8.0~rc2 | disco| source, ... [Test Case] 1) Deploy a Trusty (14.04 LTS) vm w/ 128M 2) Fetch latest stress-ng src code 2.1) git clone git://kernel.ubuntu.com/cking/stress-ng 2.2) cd stress-ng 2.3) make clean 2.4) make 3) Stress the mmap() with stress-ng 3.1) ./stress-ng --brk 2 --mmap 5 --vm 1 --mmap-bytes 90% 4) Disable swap (if any) 4.1) swapoff -a 5) for i in `seq 1 1`;do apt-cache policy vsftpd;done ... vsftpd: Installed: (none) Candidate: 3.0.2-1ubuntu2.14.04.1 Version table: 3.0.2-1ubuntu2.14.04.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages 3.0.2-1ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) ... [Regression Potential] The regression potential for this should be low, as it's a change in the failure path for memory allocations. This shouldn't be triggered during normal usage, and we'll thoroughly test the patched package with autopkgtests and perform scripted runs in memory-constrained systems with stress-ng. We also have a confirmation from an impacted user that the upstream patch fixes their issue without further problems. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815129/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815187] Re: Fix crash when opening DepCache before Cache
Broken in security (ubuntu2.19), fixed in proposed (ubuntu2.20). root@tt:~# apt search -o RootDir=/dev/null foobar Segmentation fault (core dumped) root@tt:~# apt install apt libapt-pkg4.12 [...] Unpacking libapt-pkg4.12:amd64 (1.0.1ubuntu2.20) over (1.0.1ubuntu2.19) ... Unpacking apt (1.0.1ubuntu2.20) over (1.0.1ubuntu2.19) ... [...] root@tt:~# apt search -o RootDir=/dev/null foobar W: Unable to read /dev/null/etc/apt/sources.list.d/ - DirectoryExists (20: Not a directory) W: Unable to read /dev/null/etc/apt/sources.list - RealFileExists (20: Not a directory) E: Could not open file /dev/null/var/lib/dpkg/status - open (20: Not a directory) E: The package lists or status file could not be parsed or opened. ** Tags removed: verification-needed verification-needed-trusty ** Tags added: verification-done verification-done-trusty -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815187 Title: Fix crash when opening DepCache before Cache Status in apt package in Ubuntu: Fix Released Status in apt source package in Trusty: Fix Committed Bug description: [Impact] apt search and probably other code crashes some time, as GetDepCache() in trusty does not call BuildCaches() first. [Test case] Run apt search -o RootDir=/dev/null foobar, make sure it does not crash. [Regression potential] There may be some locking implications, as we build caches when opening depcache first, without locks. That said, the same code is in use in all post-trusty releases, and they work fine. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815187/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815129] Re: apt segfaults when generating cache file
There are two armhf autopkgtest regressions for apt-1.0.1ubuntu2.20, in tests for apt [0] and autopkgtest [1]. From the autopkgtest pages we can see that these regressions were introduced long before this SRU, so it seems like a long standing issue unrelated to this patch. [0] http://autopkgtest.ubuntu.com/packages/a/apt/trusty/armhf [1] http://autopkgtest.ubuntu.com/packages/a/autopkgtest/trusty/armhf -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815129 Title: apt segfaults when generating cache file Status in apt package in Ubuntu: Fix Released Status in apt source package in Trusty: Fix Committed Status in apt package in Debian: Fix Released Bug description: [Impact] apt crashes (core dump) during cache creation [Description] When executing apt-cache several times on a memory constrained system, apt-cache can sometimes crash with a core dump file. This is related to mmap() failing allocations during cache generation, according to an upstream bug report (803417). There is an upstream patch for this bug (6789e01e do not segfault in cache generation on mmap failure) and it's included in the apt package for other series (see below), so we only need to backport it to Trusty. Upstream commit: https://salsa.debian.org/apt- team/apt/commit/6789e01e9370b3b7f65d52138c5657eaa712b4d1 $ git describe --contains 6789e01e9370 1.1_exp16~5 $ rmadison apt apt | 1.0.1ubuntu2| trusty | source, ... apt | 1.0.1ubuntu2.19 | trusty-security | source, ... apt | 1.0.1ubuntu2.19 | trusty-updates | source, ... apt | 1.2.10ubuntu1 | xenial | source, ... apt | 1.6.1 | bionic | source, ... apt | 1.7.0 | cosmic | source, ... apt | 1.8.0~rc2 | disco| source, ... [Test Case] 1) Deploy a Trusty (14.04 LTS) vm w/ 128M 2) Fetch latest stress-ng src code 2.1) git clone git://kernel.ubuntu.com/cking/stress-ng 2.2) cd stress-ng 2.3) make clean 2.4) make 3) Stress the mmap() with stress-ng 3.1) ./stress-ng --brk 2 --mmap 5 --vm 1 --mmap-bytes 90% 4) Disable swap (if any) 4.1) swapoff -a 5) for i in `seq 1 1`;do apt-cache policy vsftpd;done ... vsftpd: Installed: (none) Candidate: 3.0.2-1ubuntu2.14.04.1 Version table: 3.0.2-1ubuntu2.14.04.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages 3.0.2-1ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) ... [Regression Potential] The regression potential for this should be low, as it's a change in the failure path for memory allocations. This shouldn't be triggered during normal usage, and we'll thoroughly test the patched package with autopkgtests and perform scripted runs in memory-constrained systems with stress-ng. We also have a confirmation from an impacted user that the upstream patch fixes their issue without further problems. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815129/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815761] [NEW] Alternative to Dpkg::Post-Invoke that runs even if dpkg did not have to be invoked
Public bug reported: [Impact] Dpkg::Post-Invoke is run only when dpkg had to be run. We'd like to be able to show some extra output even if no changes had been made. Imagine "the user disabled the security repo, and does not get any updates shown scenario" - we'd like to be able to tell them that there are security updates available after all. [Test case] To be updated once the mechanism is in place, but basically perform an upgrade w/o changes, and make sure the specified hook runs at the end. [Regression potential] No-change upgrades/install can now fail if this new hooks fail. ** Affects: apt (Ubuntu) Importance: Undecided Status: In Progress ** Affects: apt (Ubuntu Trusty) Importance: Undecided Status: New ** Affects: apt (Ubuntu Xenial) Importance: Undecided Status: New ** Affects: apt (Ubuntu Bionic) Importance: Undecided Status: New ** Affects: apt (Ubuntu Cosmic) Importance: Undecided Status: New ** Affects: apt (Ubuntu Disco) Importance: Undecided Status: In Progress ** Package changed: ubuntu => apt (Ubuntu) ** Also affects: apt (Ubuntu Xenial) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Disco) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Trusty) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Bionic) Importance: Undecided Status: New ** Changed in: apt (Ubuntu Disco) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815761 Title: Alternative to Dpkg::Post-Invoke that runs even if dpkg did not have to be invoked Status in apt package in Ubuntu: In Progress Status in apt source package in Trusty: New Status in apt source package in Xenial: New Status in apt source package in Bionic: New Status in apt source package in Cosmic: New Status in apt source package in Disco: In Progress Bug description: [Impact] Dpkg::Post-Invoke is run only when dpkg had to be run. We'd like to be able to show some extra output even if no changes had been made. Imagine "the user disabled the security repo, and does not get any updates shown scenario" - we'd like to be able to tell them that there are security updates available after all. [Test case] To be updated once the mechanism is in place, but basically perform an upgrade w/o changes, and make sure the specified hook runs at the end. [Regression potential] No-change upgrades/install can now fail if this new hooks fail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815761/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815760] [NEW] Additional hooks for update
Public bug reported: [Impact] We want to write some scripts for apt that run on update if apt shows an update count, to provide further details about the new cache. [Test case] Specify a APT::Update-Post-Invoke-Stats script and check that (1) it shows in apt update (2) it does not show in apt-get update [Regression potential] More scripts may fail the update now, but there should not be any registered so far. ** Affects: apt (Ubuntu) Importance: Undecided Status: In Progress ** Affects: apt (Ubuntu Xenial) Importance: Undecided Status: New ** Affects: apt (Ubuntu Bionic) Importance: Undecided Status: New ** Affects: apt (Ubuntu Cosmic) Importance: Undecided Status: New ** Affects: apt (Ubuntu Disco) Importance: Undecided Status: In Progress ** Also affects: apt (Ubuntu Xenial) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Disco) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Cosmic) Importance: Undecided Status: New ** Changed in: apt (Ubuntu Disco) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815760 Title: Additional hooks for update Status in apt package in Ubuntu: In Progress Status in apt source package in Xenial: New Status in apt source package in Bionic: New Status in apt source package in Cosmic: New Status in apt source package in Disco: In Progress Bug description: [Impact] We want to write some scripts for apt that run on update if apt shows an update count, to provide further details about the new cache. [Test case] Specify a APT::Update-Post-Invoke-Stats script and check that (1) it shows in apt update (2) it does not show in apt-get update [Regression potential] More scripts may fail the update now, but there should not be any registered so far. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815760/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815750] Re: autopkgtest failure due to security update
** Changed in: apt (Ubuntu Xenial) Assignee: Dan Streetman (ddstreet) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815750 Title: autopkgtest failure due to security update Status in apt package in Ubuntu: New Status in apt source package in Trusty: Invalid Status in apt source package in Xenial: In Progress Status in apt source package in Bionic: Invalid Status in apt source package in Cosmic: Invalid Bug description: [impact] the security update for: SECURITY UPDATE: content injection in http method (CVE-2019-3462) (LP: #1812353) causes an autopkgtest failure for: Failed tests: test-cve-2019-3462-dequote-injection [test case] run autopkgtest on the security-patched version [regression potential] the test needs to be updated, so the regression potential is around the test continuing to fail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815750/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815761] [NEW] Alternative to Dpkg::Post-Invoke that runs even if dpkg did not have to be invoked
You have been subscribed to a public bug: [Impact] Dpkg::Post-Invoke is run only when dpkg had to be run. We'd like to be able to show some extra output even if no changes had been made. Imagine "the user disabled the security repo, and does not get any updates shown scenario" - we'd like to be able to tell them that there are security updates available after all. [Test case] To be updated once the mechanism is in place, but basically perform an upgrade w/o changes, and make sure the specified hook runs at the end. [Regression potential] No-change upgrades/install can now fail if this new hooks fail. ** Affects: apt (Ubuntu) Importance: Undecided Status: New -- Alternative to Dpkg::Post-Invoke that runs even if dpkg did not have to be invoked https://bugs.launchpad.net/bugs/1815761 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1812696] Re: APT doc and manpage uses wrong ubuntu-codename
Fixes for other releases are queued up in git for the next SRUs (which include some more substantial changes) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1812696 Title: APT doc and manpage uses wrong ubuntu-codename Status in apt package in Ubuntu: Fix Released Status in apt source package in Trusty: Invalid Status in apt source package in Xenial: In Progress Status in apt source package in Bionic: In Progress Status in apt source package in Cosmic: In Progress Status in apt source package in Disco: Fix Released Bug description: [Impact] APT documentation/example/manpages isn't referencing the current release which could be misleading for certain users. --- APT src code: --- [GOOD ubuntu-codename] * trusty: apt-1.0.1ubuntu2.18/doc/apt-verbatim.ent: [WRONG ubuntu-codename] * xenial: apt-1.2.29/doc/apt-verbatim.ent: * bionic: apt-1.6.7/doc/apt-verbatim.ent: * disco: apt-1.8.0~alpha3/doc/apt-verbatim.ent: --- * vendor/ubuntu/sources.list.in --- # See sources.list(5) manpage for more information # Remember that CD-ROMs, DVDs and such are managed through the apt-cdrom tool. deb http://us.archive.ubuntu.com/ubuntu main restricted deb-src http://us.archive.ubuntu.com/ubuntu main restricted deb http://security.ubuntu.com/ubuntu -security main restricted deb-src http://security.ubuntu.com/ubuntu -security main restricted deb http://us.archive.ubuntu.com/ubuntu -updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu -updates main restricted --- The ubuntu-codename variable for Xenial and late in APT points to 'trusty or 'xenial' which generate the doc example & manpage with the wrong release instead of the actual ubuntu-codename. APT in Xenial point to 'trusty'. APT in Bionic and late to 'xenial' It also affect the man page: Example took from Bionic: http://manpages.ubuntu.com/manpages/bionic/man5/sources.list.5.html http://manpages.ubuntu.com/manpages/bionic/man5/apt_preferences.5.html [Test Case] With Xenial and late: * Look sources.list(5) manpage Ex: http://manpages.ubuntu.com/manpages/bionic/man5/sources.list.5.html * Look apt_preferences(5) manpage Ex: http://manpages.ubuntu.com/manpages/bionic/man5/apt_preferences.5.html * Look /usr/share/doc/apt/examples/sources.list $ lsb_release -cs bionic $ cat /usr/share/doc/apt/examples/sources.list # See sources.list(5) manpage for more information # Remember that CD-ROMs, DVDs and such are managed through the apt-cdrom tool. deb http://us.archive.ubuntu.com/ubuntu xenial main restricted deb-src http://us.archive.ubuntu.com/ubuntu xenial main restricted deb http://security.ubuntu.com/ubuntu xenial-security main restricted deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted deb http://us.archive.ubuntu.com/ubuntu xenial-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu xenial-updates main restricted -- You'll notice they all point to the wrong release. While we understand it's not a "bug' and only a reference/example... I think it's for the best interest of all if the examples/manpage reference the current release. [Regression Potential] * None, it only affect documentation/examples and manpages. No behavior change in the APT code. [Other Info] [Original Description] From APT src code : --- [GOOD ubuntu-codename] * trusty: apt-1.0.1ubuntu2.18/doc/apt-verbatim.ent: [WRONG ubuntu-codename] * xenial: apt-1.2.29/doc/apt-verbatim.ent: * bionic: apt-1.6.7/doc/apt-verbatim.ent: * disco: apt-1.8.0~alpha3/doc/apt-verbatim.ent: --- * vendor/ubuntu/sources.list.in --- # See sources.list(5) manpage for more information # Remember that CD-ROMs, DVDs and such are managed through the apt-cdrom tool. deb http://us.archive.ubuntu.com/ubuntu main restricted deb-src http://us.archive.ubuntu.com/ubuntu main restricted deb http://security.ubuntu.com/ubuntu -security main restricted deb-src http://security.ubuntu.com/ubuntu -security main restricted deb http://us.archive.ubuntu.com/ubuntu -updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu -updates main restricted --- The ubuntu-codename variable for Bionic and late in APT points to Xenial which generate the doc example with Xenial instead of the actual codename. * ./doc/sources.list.5.xml --- %aptverbatiment; --- It also seems to affect the man page by mentionning 'xenial'. Example took from Bionic: http://manpages.ubuntu.com/manpages/bionic/man5/sources.list.5.html http://manpages.ubuntu.com/manpages/bionic/man5/apt_preferences.5.html To manage notifications about this bug go to:
[Touch-packages] [Bug 1359486] Re: "Use LibreOffice Dialogs" setting is ignored in KDE
LibreOffice has moved to Qt5 in 6.2. ** Changed in: qt4-x11 (Ubuntu) Status: Confirmed => Won't Fix ** Changed in: libreoffice (Ubuntu) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qt4-x11 in Ubuntu. https://bugs.launchpad.net/bugs/1359486 Title: "Use LibreOffice Dialogs" setting is ignored in KDE Status in LibreOffice: Won't Fix Status in libreoffice package in Ubuntu: Won't Fix Status in qt4-x11 package in Ubuntu: Won't Fix Bug description: Kubuntu 14.04 (KDE Desktop Environment) [update] This is now affecting packages from main ubuntu (trusty) repositories: libreoffice Version: 4.2.8-0ubuntu2 0 qt4-x11 Version: 4:4.8.5+git192-g085f851+dfsg-2ubuntu4.1 [/update] LibreOffice uses it's native filepicker/save dialogs, regardless of whether the config option "Use LibreOffice Dialogs" is ticked or not. Related Bugs: https://bugreports.qt-project.org/browse/QTBUG-38585 https://bugreports.qt-project.org/browse/QTBUG-34614 According to the LO team, both these bugs have patches that address the automatic disabling of Qt dialogs at runtime (if buggy Qt is detected.) Initial report/discussion on LO bugtracker (now closed) here: https://bugs.freedesktop.org/show_bug.cgi?id=82598 [obsolete] Packages from this ppa: https://launchpad.net/~libreoffice Version: 4.3.0-3ubuntu2~trusty1 (as reported by dpkg, note updated packages as of about 1 hour ago) or 4.3.0.4 Build ID: 430m0(Build:4) as reported by LibreOffice about dialog. This is a regression from 4.2.4-0ubuntu2 currently in the main ubuntu security repository. [/obsolete] To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1359486/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1812095] Re: console login loop after entering username followed by RETURN
*** This bug is a duplicate of bug 1813873 *** https://bugs.launchpad.net/bugs/1813873 I have the same problem of the enter in the password field send many enters. It happens to me in ubuntu 16.04.5 - 4.4.0-142 Tested that in 4.4.0-141 don't happen. Also commented in this issue: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1813873 (the one that current issue is marked as duplicated of) that kernel 4.4.0-143 has a fix for this. I tested the kernel 4.4.0-143, and i can't reproduce the issue, so looks like fixed. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to shadow in Ubuntu. https://bugs.launchpad.net/bugs/1812095 Title: console login loop after entering username followed by RETURN Status in shadow package in Ubuntu: Confirmed Bug description: login: password: Just do nothing. About two seconds later ... login: password: login: password: login: password: After this being displayed three times: "Too many failure" or so and login is restarting. You cant login at all. Only solution: clear the password for the account you want to login with. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: login 1:4.5-1ubuntu1 ProcVersionSignature: Ubuntu 4.18.0-14.15-generic 4.18.20 Uname: Linux 4.18.0-14-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: XFCE Date: Wed Jan 16 19:34:30 2019 InstallationDate: Installed on 2011-10-19 (2645 days ago) InstallationMedia: Xubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) SourcePackage: shadow UpgradeStatus: Upgraded to cosmic on 2018-11-03 (74 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/shadow/+bug/1812095/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815750] Re: autopkgtest failure due to security update
Yes, I know they're broken in xenial, and it's fixed in git, and will be part of the next SRU. ** Changed in: apt (Ubuntu Bionic) Status: New => Invalid ** Changed in: apt (Ubuntu Cosmic) Status: New => Invalid ** Changed in: apt (Ubuntu Trusty) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815750 Title: autopkgtest failure due to security update Status in apt package in Ubuntu: New Status in apt source package in Trusty: Invalid Status in apt source package in Xenial: In Progress Status in apt source package in Bionic: Invalid Status in apt source package in Cosmic: Invalid Bug description: [impact] the security update for: SECURITY UPDATE: content injection in http method (CVE-2019-3462) (LP: #1812353) causes an autopkgtest failure for: Failed tests: test-cve-2019-3462-dequote-injection [test case] run autopkgtest on the security-patched version [regression potential] the test needs to be updated, so the regression potential is around the test continuing to fail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815750/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815129] Re: apt segfaults when generating cache file
Tested on apt-1.0.1ubuntu2.20 from trusty-proposed. Tried reproducing according to the test case from description, and verified that apt-cache does not crash: ubuntu@apt-stress:~/stress-ng$ dpkg -l | grep apt ii apt 1.0.1ubuntu2.20 (while having stress-ng running) ubuntu@apt-stress:~/stress-ng$ for i in `seq 1 1`;do apt-cache policy vsftpd;done E: Couldn't make mmap of 30021560 bytes - MMap-mmap (12: Cannot allocate memory) E: The package lists or status file could not be parsed or opened. ** Tags removed: verification-needed verification-needed-trusty ** Tags added: verification-done-trusty ** Tags added: verification-needed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815129 Title: apt segfaults when generating cache file Status in apt package in Ubuntu: Fix Released Status in apt source package in Trusty: Fix Committed Status in apt package in Debian: Fix Released Bug description: [Impact] apt crashes (core dump) during cache creation [Description] When executing apt-cache several times on a memory constrained system, apt-cache can sometimes crash with a core dump file. This is related to mmap() failing allocations during cache generation, according to an upstream bug report (803417). There is an upstream patch for this bug (6789e01e do not segfault in cache generation on mmap failure) and it's included in the apt package for other series (see below), so we only need to backport it to Trusty. Upstream commit: https://salsa.debian.org/apt- team/apt/commit/6789e01e9370b3b7f65d52138c5657eaa712b4d1 $ git describe --contains 6789e01e9370 1.1_exp16~5 $ rmadison apt apt | 1.0.1ubuntu2| trusty | source, ... apt | 1.0.1ubuntu2.19 | trusty-security | source, ... apt | 1.0.1ubuntu2.19 | trusty-updates | source, ... apt | 1.2.10ubuntu1 | xenial | source, ... apt | 1.6.1 | bionic | source, ... apt | 1.7.0 | cosmic | source, ... apt | 1.8.0~rc2 | disco| source, ... [Test Case] 1) Deploy a Trusty (14.04 LTS) vm w/ 128M 2) Fetch latest stress-ng src code 2.1) git clone git://kernel.ubuntu.com/cking/stress-ng 2.2) cd stress-ng 2.3) make clean 2.4) make 3) Stress the mmap() with stress-ng 3.1) ./stress-ng --brk 2 --mmap 5 --vm 1 --mmap-bytes 90% 4) Disable swap (if any) 4.1) swapoff -a 5) for i in `seq 1 1`;do apt-cache policy vsftpd;done ... vsftpd: Installed: (none) Candidate: 3.0.2-1ubuntu2.14.04.1 Version table: 3.0.2-1ubuntu2.14.04.1 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages 3.0.2-1ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) Segmentation fault (core dumped) ... [Regression Potential] The regression potential for this should be low, as it's a change in the failure path for memory allocations. This shouldn't be triggered during normal usage, and we'll thoroughly test the patched package with autopkgtests and perform scripted runs in memory-constrained systems with stress-ng. We also have a confirmation from an impacted user that the upstream patch fixes their issue without further problems. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815129/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815523] Re: The last MESA updates (02/07/19) corrupted output to DisplayLink
Sorry. No, running the stock kernel now & no bug. Running the stock kernel and this video driver $ sudo dpkg -l |grep xserver-xorg-core ii xserver-xorg-core-hwe-18.04 2:1.20.1-3ubuntu2.1~18.04.1 amd64 Xorg X server - core server $ uname -a Linux -XX 4.18.0-15-generic #16~18.04.1-Ubuntu SMP Thu Feb 7 14:06:04 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1815523 Title: The last MESA updates (02/07/19) corrupted output to DisplayLink Status in mesa package in Ubuntu: Incomplete Bug description: Prior to Thursday's "update" from Bionic-Proposed, the MESA was working fine; afterwards, gameplay on STEAM has become choppy and staccato; secondary display via a USB-C through DisplayPort UD3900 (Pluggable) is completely corrupted. See attached picture. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.18.0-15.16~18.04.1-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity:Unity7:ubuntu Date: Mon Feb 11 16:50:58 2019 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: acpi-call, 1.1.0, 4.18.0-15-generic, x86_64: installedError! Could not locate dkms.conf file. File: does not exist. ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Device [8086:3ea0] (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:1323] InstallationDate: Installed on 2019-01-15 (27 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: System76 Galago Pro ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-15-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/05/2018 dmi.bios.vendor: INSYDE Corp. dmi.bios.version: 1.07.03 dmi.board.asset.tag: Tag 12345 dmi.board.name: Galago Pro dmi.board.vendor: System76 dmi.board.version: galp3-c dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: System76 dmi.chassis.version: galp3-c dmi.modalias: dmi:bvnINSYDECorp.:bvr1.07.03:bd12/05/2018:svnSystem76:pnGalagoPro:pvrgalp3-c:rvnSystem76:rnGalagoPro:rvrgalp3-c:cvnSystem76:ct10:cvrgalp3-c: dmi.product.family: Not Applicable dmi.product.name: Galago Pro dmi.product.sku: Not Applicable dmi.product.version: galp3-c dmi.sys.vendor: System76 version.compiz: compiz 1:0.9.13.1+18.04.20180302-0ubuntu1 version.libdrm2: libdrm2 2.4.95-1~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.8-0ubuntu0~18.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.8-0ubuntu0~18.04.2 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1815523/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815693] Re: Kubuntu 18.10 Xorg severe memory leak
** Attachment added: "What it looks like when the machine freezes up" https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1815693/+attachment/5238322/+files/IMG_20190212_204350.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1815693 Title: Kubuntu 18.10 Xorg severe memory leak Status in xorg package in Ubuntu: New Bug description: Suddenly sometimes during the past two weeks my kubuntu installation has started to freeze up. I can't remember what apt upgrade that caused it, and I have done several the last few days hoping for it to be resolved. I didn't know what was causing it as I hadn't made any other changes expect for the odd apt upgrade. Before that I had just finished a several weeks long session of intense work around the clock without having to reboot even once. Suddenly it is now freezing up within hours. Even without doing anything, just leaving the computer alone. However, yesterday I accidentally discovered that my RAM was filled up. More than filled up, even all swap was full. And before I could close anything down it froze up again. So TLDR; I have today logged the memory consumption while I was handling some bills and linked is a log of constantly increasing Xorg memory usage. So it goes until it chokes the machine and only a hard reboot is possible. My installed RAM is 10GB. Swap is 6GB. Please refer to the linked file to see how the Xorg usage creeps up. https://www.dropbox.com/s/nf1ev2dxdlc6gqw/xorg_leak.log?dl=0 Please advise what additional information I should post to have this resolved. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: xorg 1:7.7+19ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-15.16-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: KDE Date: Wed Feb 13 01:00:13 2019 DistUpgraded: 2019-02-09 11:54:01,040 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child process “./xorg_fix_proprietary.py” (No such file or directory) (8)) DistroCodename: cosmic DistroVariant: ubuntu ExtraDebuggingInterest: No GraphicsCard: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-10-22 (1209 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 80ee:0021 VirtualBox USB Tablet Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-15-generic root=UUID=8959cd47-b52f-4a6e-97bb-5d509e3c2480 ro quiet splash Renderer: Software SourcePackage: xorg UpgradeStatus: Upgraded to cosmic on 2019-02-09 (3 days ago) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.family: Virtual Machine dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.95-1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.20.1-3ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1815693/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1583801] Re: [XPS 15 9550] [ALC3266] No sound via headphones (headset) when Ubuntu boots with them plugged in
Don't know if it's related, but sometimes I don't get headphones audio when my XPS boots. Disabling "Auto-Mute Mode" from alsamixer seems to fix the problem. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1583801 Title: [XPS 15 9550] [ALC3266] No sound via headphones (headset) when Ubuntu boots with them plugged in Status in PulseAudio: Unknown Status in alsa-driver package in Ubuntu: Confirmed Status in pulseaudio package in Ubuntu: Confirmed Bug description: The bug is twofold, first when computer boots if the headset (headphones with built-in mic, one audio jack) is plugged in, then there is no sound (via headphones or otherwise). If you plug headphones out and back in, then it usually works as expected. The second scenario is the same, except that plugging out and back in again doesn't help. In that case, I just restart the laptop, then plug them back in again and it works. In all cases, microphone works. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: alsa-base 1.0.25+dfsg-0ubuntu5 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 NonfreeKernelModules: nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: crunch 3248 F pulseaudio CurrentDesktop: Unity Date: Thu May 19 22:13:20 2016 InstallationDate: Installed on 2016-05-07 (12 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: crunch 3248 F pulseaudio Symptom_Jack: Black Headphone Out, Left Symptom_Type: No sound at all Title: [XPS 15 9550, Realtek ALC3266, Black Headphone Out, Left] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/07/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.02.00 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.02.00:bd04/07/2016:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 15 9550 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1583801/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815750] [NEW] autopkgtest failure due to security update
Public bug reported: [impact] the security update for: SECURITY UPDATE: content injection in http method (CVE-2019-3462) (LP: #1812353) causes an autopkgtest failure for: Failed tests: test-cve-2019-3462-dequote-injection [test case] run autopkgtest on the security-patched version [regression potential] the test needs to be updated, so the regression potential is around the test continuing to fail. ** Affects: apt (Ubuntu) Importance: Undecided Status: New ** Affects: apt (Ubuntu Trusty) Importance: Undecided Status: New ** Affects: apt (Ubuntu Xenial) Importance: Medium Assignee: Dan Streetman (ddstreet) Status: In Progress ** Affects: apt (Ubuntu Bionic) Importance: Undecided Status: New ** Affects: apt (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Trusty) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Cosmic) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: apt (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: apt (Ubuntu Xenial) Status: New => In Progress ** Changed in: apt (Ubuntu Xenial) Assignee: (unassigned) => Dan Streetman (ddstreet) ** Changed in: apt (Ubuntu Xenial) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apt in Ubuntu. https://bugs.launchpad.net/bugs/1815750 Title: autopkgtest failure due to security update Status in apt package in Ubuntu: New Status in apt source package in Trusty: New Status in apt source package in Xenial: In Progress Status in apt source package in Bionic: New Status in apt source package in Cosmic: New Bug description: [impact] the security update for: SECURITY UPDATE: content injection in http method (CVE-2019-3462) (LP: #1812353) causes an autopkgtest failure for: Failed tests: test-cve-2019-3462-dequote-injection [test case] run autopkgtest on the security-patched version [regression potential] the test needs to be updated, so the regression potential is around the test continuing to fail. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1815750/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1666203] Re: pam_tty_audit failed in pam_open_session
** Description changed: Dear Maintainer. I found a bug in pam_tty_audit. When Using the pam_tty_audit with other pam modules(ex, pam_ldap), it failed in pam_open_session. It was triggared by use uninitialized variable in pam_tty_audit.c::pam_open_session. * Enviroments Ubuntu 14.04.4 LTS linux-image-3.16.0-71-generic3.16.0-71.92~14.04.1 libpam-ldap:amd64184-8.5ubuntu3 libpam-modules:amd641.1.8-1ubuntu2.2 Ubuntu 16.04.2 TLS linux-image-4.4.0-62-generic4.4.0-62.83 libpam-ldap:amd64184-8.7ubuntu1 libpam-modules:amd641.1.8-3.2ubuntu2 * Reproduction method 1. Install libpam-ldap. 2. Add the following to the end of /etc/pam.d/common-sessions session required pam_tty_audit.so enable=* open_only 3. When logging in with ssh etc., pam_tty_audit will fail and login fails * Solution (== 2018/04/16 Link updated ==) apply upstream patch - https://bit.ly/2BtN52W + https://github.com/linux-pam/linux-pam/commit/c5f829931a22c65feffee16570efdae036524bee * Logs (on Ubuntu14.04) -- auth.log -- May 18 14:47:03 vm sshd[2272]: Accepted publickey for test from 10.99.0.1 port 51398 ssh2: RSA 8f:39:1c:3a:f4:9d:ca:99:67:fc:e3:fd:1e:0c:5b:a8 May 18 14:47:03 vm sshd[2272]: pam_unix(sshd:session): session opened for user test by (uid=0) May 18 14:47:03 vm sshd[2272]: pam_tty_audit(sshd:session): error setting current audit status: Invalid argument May 18 14:47:03 vm sshd[2272]: error: PAM: pam_open_session(): Cannot make/remove an entry for the specified session May 18 14:47:03 vm sshd[2297]: Received disconnect from 10.99.0.1: 11: disconnected by user -- syslog -- May 18 14:47:03 vm audispd: node=vm type=USER_ACCT msg=audit(1463550423.399:58): pid=2272 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=CRED_ACQ msg=audit(1463550423.403:59): pid=2272 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=LOGIN msg=audit(1463550423.403:60): pid=2272 uid=0 old-auid=4294967295 auid=20299 old-ses=4294967295 ses=3 res=1 May 18 14:47:03 vm audispd: node=vm type=CONFIG_CHANGE msg=audit(1463550423.403:61): pid=2272 uid=0 auid=20299 ses=3 op=tty_set old-enabled=0 new-enabled=1 old-log_passwd=0 new-log_passwd=32743 res=0 May 18 14:47:03 vm audispd: node=vm type=USER_START msg=audit(1463550423.447:62): pid=2272 uid=0 auid=20299 ses=3 msg='op=PAM:session_open acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=failed' May 18 14:47:03 vm audispd: node=vm type=CRED_ACQ msg=audit(1463550423.447:63): pid=2297 uid=0 auid=20299 ses=3 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=CRED_DISP msg=audit(1463550423.451:64): pid=2272 uid=0 auid=20299 ses=3 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' - Thanks regards. https://bit.ly/2BtN52W + Thanks regards. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pam in Ubuntu. https://bugs.launchpad.net/bugs/1666203 Title: pam_tty_audit failed in pam_open_session Status in pam package in Ubuntu: Fix Released Status in pam package in Debian: Fix Released Bug description: Dear Maintainer. I found a bug in pam_tty_audit. When Using the pam_tty_audit with other pam modules(ex, pam_ldap), it failed in pam_open_session. It was triggared by use uninitialized variable in pam_tty_audit.c::pam_open_session. * Enviroments Ubuntu 14.04.4 LTS linux-image-3.16.0-71-generic3.16.0-71.92~14.04.1 libpam-ldap:amd64184-8.5ubuntu3 libpam-modules:amd641.1.8-1ubuntu2.2 Ubuntu 16.04.2 TLS linux-image-4.4.0-62-generic4.4.0-62.83 libpam-ldap:amd64184-8.7ubuntu1 libpam-modules:amd641.1.8-3.2ubuntu2 * Reproduction method 1. Install libpam-ldap. 2. Add the following to the end of /etc/pam.d/common-sessions session required pam_tty_audit.so enable=* open_only 3. When logging in with ssh etc., pam_tty_audit will fail and login fails * Solution (== 2018/04/16 Link updated ==) apply upstream patch https://github.com/linux-pam/linux-pam/commit/c5f829931a22c65feffee16570efdae036524bee * Logs (on Ubuntu14.04) -- auth.log -- May 18 14:47:03 vm sshd[2272]: Accepted publickey for test from 10.99.0.1 port 51398 ssh2: RSA 8f:39:1c:3a:f4:9d:ca:99:67:fc:e3:fd:1e:0c:5b:a8 May 18 14:47:03 vm sshd[2272]: pam_unix(sshd:session): session opened for user test by (uid=0) May 18 14:47:03 vm sshd[2272]: pam_tty_audit(sshd:session): error
[Touch-packages] [Bug 1607696] Re: Version string missing in libjpeg.pc
** Changed in: libjpeg-turbo (Ubuntu) Assignee: Matthias Klose (doko) => (unassigned) ** Tags added: rls-dd-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libjpeg-turbo in Ubuntu. https://bugs.launchpad.net/bugs/1607696 Title: Version string missing in libjpeg.pc Status in libjpeg-turbo package in Ubuntu: Confirmed Bug description: Proper pkg-config files are installed if I build libjpeg-turbo myself. The description in the pkg-config file shipped by Ubuntu is also different from what is in upstream so I assume this is caused by Ubuntu (/Debian?) patching in a custom pkg-config file before they were included upstream in https://github.com/libjpeg-turbo/libjpeg- turbo/pull/53 . To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libjpeg-turbo/+bug/1607696/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815693] Re: Kubuntu 18.10 Xorg severe memory leak
** Description changed: Suddenly sometimes during the past two weeks my kubuntu installation has started to freeze up. I can't remember what apt upgrade that caused it, and I have done several the last few days hoping for it to be resolved. I didn't know what was causing it as I hadn't made any other changes expect for the odd apt upgrade. Before that I had just finished a several weeks long session of intense work around the clock without having to reboot even once. Suddenly it is now freezing up within hours. Even without doing anything, just leaving the computer alone. However, yesterday I accidentally discovered that my RAM was filled up. More than filled up, even all swap was full. And before I could close anything down it froze up again. So TLDR; I have today logged the memory consumption while I was handling some bills and linked is a log of constantly increasing Xorg memory usage. So it goes until it chokes the machine and only a hard reboot is possible. My installed RAM is 10GB. Swap is 6GB. Please refer to the linked file to see how the Xorg usage creeps up. - https://www.dropbox.com/s/nf1ev2dxdl..._leak.log?dl=0 + https://www.dropbox.com/s/nf1ev2dxdlc6gqw/xorg_leak.log?dl=0 Please advise what additional information I should post to have this resolved. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: xorg 1:7.7+19ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-15.16-generic 4.18.20 Uname: Linux 4.18.0-15-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: KDE Date: Wed Feb 13 01:00:13 2019 DistUpgraded: 2019-02-09 11:54:01,040 ERROR got error from PostInstallScript ./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child process “./xorg_fix_proprietary.py” (No such file or directory) (8)) DistroCodename: cosmic DistroVariant: ubuntu ExtraDebuggingInterest: No GraphicsCard: - VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) -Subsystem: VMware SVGA II Adapter [15ad:0405] + VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller]) + Subsystem: VMware SVGA II Adapter [15ad:0405] InstallationDate: Installed on 2015-10-22 (1209 days ago) InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021) Lsusb: - Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub - Bus 002 Device 003: ID 80ee:0021 VirtualBox USB Tablet - Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 003: ID 80ee:0021 VirtualBox USB Tablet + Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-15-generic root=UUID=8959cd47-b52f-4a6e-97bb-5d509e3c2480 ro quiet splash Renderer: Software SourcePackage: xorg UpgradeStatus: Upgraded to cosmic on 2019-02-09 (3 days ago) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.family: Virtual Machine dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.95-1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.20.1-3ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.6-1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-3 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1815693 Title: Kubuntu 18.10 Xorg severe memory leak Status in xorg package in Ubuntu: New Bug description: Suddenly sometimes during the past two weeks my kubuntu installation has started to freeze up. I can't remember what apt upgrade that caused it, and I have done several the last few days hoping for it to be resolved. I didn't know what was causing it as I hadn't made any other changes expect for the odd apt upgrade. Before that I had just finished a several weeks long session of intense work around the clock without having to reboot even once. Suddenly it is now freezing up within
[Touch-packages] [Bug 1815742] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238269/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1813432] Re: Specific PDF file fails to print to HP m551dn printer
I have added this case to upstream discussion now: https://github.com/OpenPrinting/cups-filters/issues/65 ** Bug watch added: github.com/OpenPrinting/cups-filters/issues #65 https://github.com/OpenPrinting/cups-filters/issues/65 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1813432 Title: Specific PDF file fails to print to HP m551dn printer Status in cups package in Ubuntu: New Bug description: One particular PDF file is failing to print. I have no idea why. When I say failing to print I mean that my computer thinks the file printed but the printer shows no sign of ever having received it. The display of the printer never changes to show that it is receiving or printing a file, and the job log of the printer doesn't show that it was received either. I also checked the printer event log and it doesn't show any events at the time I attempted to print the file. Unfortunately I can't attach the PDF file itself because it contains private information, and I can't find another PDF that exhibits this problem. I even tried generating a new PDF exactly the same way the old one was generated -- with the scan to email PDF function on my scanner -- and the new PDF prints just fine. I tried uploading the PDF directly to the printer with FTP and it prints just fine that way. I enabled CUPS debug mode before attempting to print the file. Attached is the resulting contents of /var/log/cups/error_log. I wish I knew what was going on here but honestly I have no idea. Perhaps you can learn something from the error_log. I hope so. Other files, including other PDFs, do print. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: cups 2.2.10-3 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.10-0ubuntu19 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Jan 26 17:47:49 2019 InstallationDate: Installed on 2019-01-02 (24 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) Lpstat: device for duplex: socket://m551dn.kamens.brookline.ma.us:9100 device for HP_LaserJet_500_color_M551_1637DA_: ipps://m551dn.local:443/ipp/print device for simplex: socket://m551dn.kamens.brookline.ma.us:9100 MachineType: Acer Predator G6-710 Papersize: letter PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/simplex.ppd', '/etc/cups/ppd/HP_LaserJet_500_color_M551_1637DA_.ppd', '/etc/cups/ppd/duplex.ppd'] failed with exit code 2: grep: /etc/cups/ppd/simplex.ppd: Permission denied grep: /etc/cups/ppd/HP_LaserJet_500_color_M551_1637DA_.ppd: Permission denied grep: /etc/cups/ppd/duplex.ppd: Permission denied ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=1 SourcePackage: cups UpgradeStatus: Upgraded to disco on 2019-01-21 (5 days ago) dmi.bios.date: 05/18/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: R01-A4 dmi.board.name: Predator G6-710 dmi.board.vendor: Acer dmi.chassis.type: 3 dmi.chassis.vendor: Acer dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrR01-A4:bd05/18/2016:svnAcer:pnPredatorG6-710:pvr:rvnAcer:rnPredatorG6-710:rvr:cvnAcer:ct3:cvr: dmi.product.family: Acer Desktop dmi.product.name: Predator G6-710 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1813432/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] nmcli-con.txt
apport information ** Attachment added: "nmcli-con.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238272/+files/nmcli-con.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] nmcli-dev.txt
apport information ** Attachment added: "nmcli-dev.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238273/+files/nmcli-dev.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238270/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] modified.conffile..etc.NetworkManager.NetworkManager.conf.txt
apport information ** Attachment added: "modified.conffile..etc.NetworkManager.NetworkManager.conf.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238271/+files/modified.conffile..etc.NetworkManager.NetworkManager.conf.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238267/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetworkManager.conf.txt
apport information ** Attachment added: "NetworkManager.conf.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238265/+files/NetworkManager.conf.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238268/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] PciNetwork.txt
apport information ** Attachment added: "PciNetwork.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238266/+files/PciNetwork.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.virbr1-nic.txt
apport information ** Attachment added: "NetDevice.virbr1-nic.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238262/+files/NetDevice.virbr1-nic.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.wlan0.txt
apport information ** Attachment added: "NetDevice.wlan0.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238264/+files/NetDevice.wlan0.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.vnet0.txt
apport information ** Attachment added: "NetDevice.vnet0.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238263/+files/NetDevice.vnet0.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.virbr1.txt
apport information ** Attachment added: "NetDevice.virbr1.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238261/+files/NetDevice.virbr1.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.virbr0-nic.txt
apport information ** Attachment added: "NetDevice.virbr0-nic.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238260/+files/NetDevice.virbr0-nic.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.ovpn-surf.txt
apport information ** Attachment added: "NetDevice.ovpn-surf.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238257/+files/NetDevice.ovpn-surf.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.tinc0.txt
apport information ** Attachment added: "NetDevice.tinc0.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238258/+files/NetDevice.tinc0.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.virbr0.txt
apport information ** Attachment added: "NetDevice.virbr0.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238259/+files/NetDevice.virbr0.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238252/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.lo.txt
apport information ** Attachment added: "NetDevice.lo.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238256/+files/NetDevice.lo.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238248/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.eth0.txt
apport information ** Attachment added: "NetDevice.eth0.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238255/+files/NetDevice.eth0.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.docker0.txt
apport information ** Attachment added: "NetDevice.docker0.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238254/+files/NetDevice.docker0.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] NetDevice.br-2c9cac607cd8.txt
apport information ** Attachment added: "NetDevice.br-2c9cac607cd8.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238253/+files/NetDevice.br-2c9cac607cd8.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] IpRoute.txt
apport information ** Attachment added: "IpRoute.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238251/+files/IpRoute.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] IpAddr.txt
apport information ** Attachment added: "IpAddr.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238250/+files/IpAddr.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] IfupdownConfig.txt
apport information ** Attachment added: "IfupdownConfig.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238249/+files/IfupdownConfig.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1815742/+attachment/5238247/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1815742/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815742] [NEW] latest network-manager segfaults in disco
Public bug reported: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu20 Architecture: amd64 CurrentDesktop: GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2016-12-22 (782 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.12.4-1ubuntu1.2 PackageArchitecture: amd64 Tags: disco Uname: Linux 4.19.0-1-amd64 x86_64 UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark _MarkForUpload: True mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.12.4 connected started full enabled enabled enabled enabled enabled ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected disco ** Attachment added: "network-manager journal output during upgrade" https://bugs.launchpad.net/bugs/1815742/+attachment/5238246/+files/journal.txt ** Tags added: apport-collected disco ** Description changed: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows the following (will attach a more complete log): feb 13 10:39:45 regan NetworkManager[2315]: NetworkManager:ERROR:src/settings/nm-settings-plugin.c:147:_nm_settings_plugin_emit_signal_connection_added: assertion failed: __extension__ ({ GTypeInstance *__inst = (GTypeInstance*) ((sett_conn)); GType __t = ((nm_settings_connection_get_type ())); gboolean __r; if (!__inst) __r = (0); else if (__inst->g_class && __inst->g_class->g_type == __t) __r = (!(0)); else __r = g_type_check_instance_is_a (__inst, __t); __r; }) feb 13 10:39:45 regan NetworkManager[2315]: [1550050785.3612] ifupdown: management mode: managed feb 13 10:39:45 regan NetworkManager[2315]: invalid uninstantiatable type '(null)' in cast to 'NMSettingsConnection' feb 13 10:39:45 regan systemd[1]: NetworkManager.service: Main process exited, code=dumped, status=6/ABRT + --- + ProblemType: Bug + ApportVersion: 2.20.10-0ubuntu20 + Architecture: amd64 + CurrentDesktop: GNOME + DistroRelease: Ubuntu 19.04 + InstallationDate: Installed on 2016-12-22 (782 days ago) + InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) + NetworkManager.state: + [main] + NetworkingEnabled=true + WirelessEnabled=true + WWANEnabled=true + Package: network-manager 1.12.4-1ubuntu1.2 + PackageArchitecture: amd64 + Tags: disco + Uname: Linux 4.19.0-1-amd64 x86_64 + UpgradeStatus: Upgraded to disco on 2017-09-18 (512 days ago) + UserGroups: adm cdrom dialout dip docker libvirt lp lpadmin lxd plugdev sambashare scanner src sudo tss wireshark + _MarkForUpload: True + mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2018-06-01T16:38:44.962715 + nmcli-nm: + RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN + running 1.12.4 connected started full enabled enabled enabled enabled enabled -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1815742 Title: latest network-manager segfaults in disco Status in network-manager package in Ubuntu: New Bug description: When I updated to the latest version of networkmanager in disco dingo (1.15.2-0ubuntu1), it started segfaulting. Reverting to the version in cosmic (1.12.4-1ubuntu1.2) solved the problem. Syslog shows
[Touch-packages] [Bug 1776173] Re: qt print dialog shipped with bionic ignores printer defaults
This is great news. Thanks a lot! (According to Debian changelog, the patch provided here was indeed used in some variant. So being so annoying was not for nothing... Sorry for being offensive, but I really wanted to have to existing solution to be implemented. Next time I might directly go the Debian way.) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtbase-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1776173 Title: qt print dialog shipped with bionic ignores printer defaults Status in qtbase-opensource-src package in Ubuntu: Fix Released Bug description: All kde applications shipped with ubuntu and particularly kubuntu bionic print via the qt print dialog, that, unfortunately, does not seem to respect the defaults set for the printer. Specifically, every time one starts to print the "duplex" option gets reset to "none" even for those printers that were configured for "long edge" duplex by default. This may lead to a huge *waste of paper*: people print, expecting the duplex, do not get it, throw away the printout and reprint, for a total of 3 times the paper usage if the print dialog respected the default. See also https://bugs.kde.org/show_bug.cgi?id=395150 As a final comment and in general, I think that Bionic should be updated to use the QT 5.11 print subsystem (from 5.9.5) as soon as possible (at least via a kubuntu ppa). The QT 5 print dialog has always been extremely poor, with no possibility to provide information about things like print quality and resolution, paper type, stapling (for printers supporting it), etc. Now, QT 5.11 has finally a better print dialog and it would be great if the bionic users could use it. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: libqt5widgets5 5.9.5+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE Date: Mon Jun 11 10:23:53 2018 EcryptfsInUse: Yes InstallationDate: Installed on 2013-12-12 (1641 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: qtbase-opensource-src UpgradeStatus: Upgraded to bionic on 2018-06-08 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1776173/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815553] Re: package openssh-server 1:7.6p1-4ubuntu0.1 failed to install/upgrade: installed openssh-server package post-installation script subprocess returned error exit status
Hi Asmita, >From the logs, some packages failed to install: Setting up gns3 (0.8.7-2) ... dpkg: error processing package gns3 (--configure): installed gns3 package post-installation script subprocess returned error exit status 10 Setting up openssh-server (1:7.6p1-4ubuntu0.1) ... dpkg: error processing package openssh-server (--configure): installed openssh-server package post-installation script subprocess returned error exit status 10 Can you please look in your syslog for any information that would help track down why these packages failed? Post them here and then change the bug status from "incomplete" to "new". ** Changed in: openssh (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/1815553 Title: package openssh-server 1:7.6p1-4ubuntu0.1 failed to install/upgrade: installed openssh-server package post-installation script subprocess returned error exit status 10 Status in openssh package in Ubuntu: Incomplete Bug description: It creates problem on installing. ProblemType: Package DistroRelease: Ubuntu 18.04 Package: openssh-server 1:7.6p1-4ubuntu0.1 ProcVersionSignature: Ubuntu 4.15.0-44.47-generic 4.15.18 Uname: Linux 4.15.0-44-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.9-0ubuntu7.5 AptOrdering: avahi-autoipd:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Tue Feb 12 09:09:51 2019 DuplicateSignature: package:openssh-server:1:7.6p1-4ubuntu0.1 Setting up gns3 (0.8.7-2) ... dpkg: error processing package gns3 (--configure): installed gns3 package post-installation script subprocess returned error exit status 10 ErrorMessage: installed openssh-server package post-installation script subprocess returned error exit status 10 InstallationDate: Installed on 2018-09-29 (135 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) Python3Details: /usr/bin/python3.6, Python 3.6.7, unpackaged PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, unpackaged RelatedPackageVersions: dpkg 1.19.0.5ubuntu2.1 apt 1.6.6ubuntu0.1 SSHDConfig: Error: command ['/usr/sbin/sshd', '-T'] failed with exit code 1: /etc/ssh/sshd_config: No such file or directory SourcePackage: openssh Title: package openssh-server 1:7.6p1-4ubuntu0.1 failed to install/upgrade: installed openssh-server package post-installation script subprocess returned error exit status 10 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/1815553/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1666203] Re: pam_tty_audit failed in pam_open_session
** Description changed: Dear Maintainer. I found a bug in pam_tty_audit. When Using the pam_tty_audit with other pam modules(ex, pam_ldap), it failed in pam_open_session. It was triggared by use uninitialized variable in pam_tty_audit.c::pam_open_session. * Enviroments Ubuntu 14.04.4 LTS linux-image-3.16.0-71-generic3.16.0-71.92~14.04.1 libpam-ldap:amd64184-8.5ubuntu3 libpam-modules:amd641.1.8-1ubuntu2.2 Ubuntu 16.04.2 TLS linux-image-4.4.0-62-generic4.4.0-62.83 libpam-ldap:amd64184-8.7ubuntu1 libpam-modules:amd641.1.8-3.2ubuntu2 * Reproduction method 1. Install libpam-ldap. 2. Add the following to the end of /etc/pam.d/common-sessions session required pam_tty_audit.so enable=* open_only 3. When logging in with ssh etc., pam_tty_audit will fail and login fails * Solution (== 2018/04/16 Link updated ==) apply upstream patch - https://github.com/linux-pam/linux-pam/commit/c5f829931a22c65feffee16570efdae036524bee + https://bit.ly/2BtN52W * Logs (on Ubuntu14.04) -- auth.log -- May 18 14:47:03 vm sshd[2272]: Accepted publickey for test from 10.99.0.1 port 51398 ssh2: RSA 8f:39:1c:3a:f4:9d:ca:99:67:fc:e3:fd:1e:0c:5b:a8 May 18 14:47:03 vm sshd[2272]: pam_unix(sshd:session): session opened for user test by (uid=0) May 18 14:47:03 vm sshd[2272]: pam_tty_audit(sshd:session): error setting current audit status: Invalid argument May 18 14:47:03 vm sshd[2272]: error: PAM: pam_open_session(): Cannot make/remove an entry for the specified session May 18 14:47:03 vm sshd[2297]: Received disconnect from 10.99.0.1: 11: disconnected by user -- syslog -- May 18 14:47:03 vm audispd: node=vm type=USER_ACCT msg=audit(1463550423.399:58): pid=2272 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=CRED_ACQ msg=audit(1463550423.403:59): pid=2272 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=LOGIN msg=audit(1463550423.403:60): pid=2272 uid=0 old-auid=4294967295 auid=20299 old-ses=4294967295 ses=3 res=1 May 18 14:47:03 vm audispd: node=vm type=CONFIG_CHANGE msg=audit(1463550423.403:61): pid=2272 uid=0 auid=20299 ses=3 op=tty_set old-enabled=0 new-enabled=1 old-log_passwd=0 new-log_passwd=32743 res=0 May 18 14:47:03 vm audispd: node=vm type=USER_START msg=audit(1463550423.447:62): pid=2272 uid=0 auid=20299 ses=3 msg='op=PAM:session_open acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=failed' May 18 14:47:03 vm audispd: node=vm type=CRED_ACQ msg=audit(1463550423.447:63): pid=2297 uid=0 auid=20299 ses=3 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=CRED_DISP msg=audit(1463550423.451:64): pid=2272 uid=0 auid=20299 ses=3 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' - Thanks regards. + Thanks regards. https://bit.ly/2BtN52W -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pam in Ubuntu. https://bugs.launchpad.net/bugs/1666203 Title: pam_tty_audit failed in pam_open_session Status in pam package in Ubuntu: Fix Released Status in pam package in Debian: Fix Released Bug description: Dear Maintainer. I found a bug in pam_tty_audit. When Using the pam_tty_audit with other pam modules(ex, pam_ldap), it failed in pam_open_session. It was triggared by use uninitialized variable in pam_tty_audit.c::pam_open_session. * Enviroments Ubuntu 14.04.4 LTS linux-image-3.16.0-71-generic3.16.0-71.92~14.04.1 libpam-ldap:amd64184-8.5ubuntu3 libpam-modules:amd641.1.8-1ubuntu2.2 Ubuntu 16.04.2 TLS linux-image-4.4.0-62-generic4.4.0-62.83 libpam-ldap:amd64184-8.7ubuntu1 libpam-modules:amd641.1.8-3.2ubuntu2 * Reproduction method 1. Install libpam-ldap. 2. Add the following to the end of /etc/pam.d/common-sessions session required pam_tty_audit.so enable=* open_only 3. When logging in with ssh etc., pam_tty_audit will fail and login fails * Solution (== 2018/04/16 Link updated ==) apply upstream patch https://bit.ly/2BtN52W * Logs (on Ubuntu14.04) -- auth.log -- May 18 14:47:03 vm sshd[2272]: Accepted publickey for test from 10.99.0.1 port 51398 ssh2: RSA 8f:39:1c:3a:f4:9d:ca:99:67:fc:e3:fd:1e:0c:5b:a8 May 18 14:47:03 vm sshd[2272]: pam_unix(sshd:session): session opened for user test by (uid=0) May 18 14:47:03 vm sshd[2272]: pam_tty_audit(sshd:session): error setting current audit status: Invalid argument May 18 14:47:03
[Touch-packages] [Bug 1776173] Re: qt print dialog shipped with bionic ignores printer defaults
Should a specific bug be opened to ask for this to be officially backported to Bionic+Cosmic as a bug-fix? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to qtbase-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1776173 Title: qt print dialog shipped with bionic ignores printer defaults Status in qtbase-opensource-src package in Ubuntu: Fix Released Bug description: All kde applications shipped with ubuntu and particularly kubuntu bionic print via the qt print dialog, that, unfortunately, does not seem to respect the defaults set for the printer. Specifically, every time one starts to print the "duplex" option gets reset to "none" even for those printers that were configured for "long edge" duplex by default. This may lead to a huge *waste of paper*: people print, expecting the duplex, do not get it, throw away the printout and reprint, for a total of 3 times the paper usage if the print dialog respected the default. See also https://bugs.kde.org/show_bug.cgi?id=395150 As a final comment and in general, I think that Bionic should be updated to use the QT 5.11 print subsystem (from 5.9.5) as soon as possible (at least via a kubuntu ppa). The QT 5 print dialog has always been extremely poor, with no possibility to provide information about things like print quality and resolution, paper type, stapling (for printers supporting it), etc. Now, QT 5.11 has finally a better print dialog and it would be great if the bionic users could use it. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: libqt5widgets5 5.9.5+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CurrentDesktop: KDE Date: Mon Jun 11 10:23:53 2018 EcryptfsInUse: Yes InstallationDate: Installed on 2013-12-12 (1641 days ago) InstallationMedia: Kubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) SourcePackage: qtbase-opensource-src UpgradeStatus: Upgraded to bionic on 2018-06-08 (2 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qtbase-opensource-src/+bug/1776173/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1666203] Re: pam_tty_audit failed in pam_open_session
** Changed in: pam (Debian) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pam in Ubuntu. https://bugs.launchpad.net/bugs/1666203 Title: pam_tty_audit failed in pam_open_session Status in pam package in Ubuntu: Fix Released Status in pam package in Debian: Fix Released Bug description: Dear Maintainer. I found a bug in pam_tty_audit. When Using the pam_tty_audit with other pam modules(ex, pam_ldap), it failed in pam_open_session. It was triggared by use uninitialized variable in pam_tty_audit.c::pam_open_session. * Enviroments Ubuntu 14.04.4 LTS linux-image-3.16.0-71-generic3.16.0-71.92~14.04.1 libpam-ldap:amd64184-8.5ubuntu3 libpam-modules:amd641.1.8-1ubuntu2.2 Ubuntu 16.04.2 TLS linux-image-4.4.0-62-generic4.4.0-62.83 libpam-ldap:amd64184-8.7ubuntu1 libpam-modules:amd641.1.8-3.2ubuntu2 * Reproduction method 1. Install libpam-ldap. 2. Add the following to the end of /etc/pam.d/common-sessions session required pam_tty_audit.so enable=* open_only 3. When logging in with ssh etc., pam_tty_audit will fail and login fails * Solution (== 2018/04/16 Link updated ==) apply upstream patch https://github.com/linux-pam/linux-pam/commit/c5f829931a22c65feffee16570efdae036524bee * Logs (on Ubuntu14.04) -- auth.log -- May 18 14:47:03 vm sshd[2272]: Accepted publickey for test from 10.99.0.1 port 51398 ssh2: RSA 8f:39:1c:3a:f4:9d:ca:99:67:fc:e3:fd:1e:0c:5b:a8 May 18 14:47:03 vm sshd[2272]: pam_unix(sshd:session): session opened for user test by (uid=0) May 18 14:47:03 vm sshd[2272]: pam_tty_audit(sshd:session): error setting current audit status: Invalid argument May 18 14:47:03 vm sshd[2272]: error: PAM: pam_open_session(): Cannot make/remove an entry for the specified session May 18 14:47:03 vm sshd[2297]: Received disconnect from 10.99.0.1: 11: disconnected by user -- syslog -- May 18 14:47:03 vm audispd: node=vm type=USER_ACCT msg=audit(1463550423.399:58): pid=2272 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=CRED_ACQ msg=audit(1463550423.403:59): pid=2272 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=LOGIN msg=audit(1463550423.403:60): pid=2272 uid=0 old-auid=4294967295 auid=20299 old-ses=4294967295 ses=3 res=1 May 18 14:47:03 vm audispd: node=vm type=CONFIG_CHANGE msg=audit(1463550423.403:61): pid=2272 uid=0 auid=20299 ses=3 op=tty_set old-enabled=0 new-enabled=1 old-log_passwd=0 new-log_passwd=32743 res=0 May 18 14:47:03 vm audispd: node=vm type=USER_START msg=audit(1463550423.447:62): pid=2272 uid=0 auid=20299 ses=3 msg='op=PAM:session_open acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=failed' May 18 14:47:03 vm audispd: node=vm type=CRED_ACQ msg=audit(1463550423.447:63): pid=2297 uid=0 auid=20299 ses=3 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' May 18 14:47:03 vm audispd: node=vm type=CRED_DISP msg=audit(1463550423.451:64): pid=2272 uid=0 auid=20299 ses=3 msg='op=PAM:setcred acct="test" exe="/usr/sbin/sshd" hostname=10.99.0.1 addr=10.99.0.1 terminal=ssh res=success' Thanks regards. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pam/+bug/1666203/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1814481] Re: bluetooth keyboard not working
I did test with bluez ppa and didn't change anything. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1814481 Title: bluetooth keyboard not working Status in bluez package in Ubuntu: Confirmed Bug description: I recently got a nice mechanical bluetooth keyboard to use on my thinkpad. It works fine with Android, Windows 10 and Xubuntu 19.04 live, but on my installed xubuntu 18.04, 18.04 live and 18.10 live it only works after calling `sudo evtest /dev/input/eventN`. Xorg.0.log shows it is detected fine, and I can't see anything there after temporarily getting it to work using the evtest trick. 18.515] (II) config/udev: Adding input device Keychron K1 (/dev/input/event23) [18.515] (**) Keychron K1: Applying InputClass "libinput keyboard catchall" [18.515] (II) Using input driver 'libinput' for 'Keychron K1' [18.515] (**) Keychron K1: always reports core events [18.515] (**) Option "Device" "/dev/input/event23" [18.515] (**) Option "_source" "server/udev" [18.516] (II) event23 - Keychron K1: is tagged by udev as: Keyboard [18.516] (II) event23 - Keychron K1: device is a keyboard [18.516] (II) event23 - Keychron K1: device removed [18.524] (II) libinput: Keychron K1: needs a virtual subdevice [18.524] (**) Option "config_info" "udev:/sys/devices/pci:00/:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:05AC:0255.0007/input/input24/event23" [18.524] (II) XINPUT: Adding extended input device "Keychron K1" (type: MOUSE, id 20) [18.524] (**) Option "AccelerationScheme" "none" [18.524] (**) Keychron K1: (accel) selected scheme none/0 [18.524] (**) Keychron K1: (accel) acceleration factor: 2.000 [18.524] (**) Keychron K1: (accel) acceleration threshold: 4 [18.524] (II) event23 - Keychron K1: is tagged by udev as: Keyboard [18.524] (II) event23 - Keychron K1: device is a keyboard [18.524] (**) Keychron K1: Applying InputClass "libinput keyboard catchall" [18.524] (II) Using input driver 'libinput' for 'Keychron K1' [18.524] (**) Keychron K1: always reports core events [18.524] (**) Option "Device" "/dev/input/event23" [18.524] (**) Option "_source" "_driver/libinput" [18.524] (II) libinput: Keychron K1: is a virtual subdevice [18.524] (**) Option "config_info" "udev:/sys/devices/pci:00/:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/hci0:256/0005:05AC:0255.0007/input/input24/event23" [18.524] (II) XINPUT: Adding extended input device "Keychron K1" (type: KEYBOARD, id 21) [18.524] (**) Option "xkb_model" "pc105" [18.524] (**) Option "xkb_layout" "us" [18.524] (**) Option "xkb_variant" "altgr-intl" [18.524] (WW) Option "xkb_options" requires a string value I've also tried using the latest 4.20.6 from mainline-ppa and the latest bluetooth/bluz ppa without success. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-45.48-lowlatency 4.15.18 Uname: Linux 4.15.0-45-lowlatency x86_64 ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: XFCE Date: Sun Feb 3 23:51:29 2019 DistUpgraded: 2019-02-03 21:49:33,752 DEBUG /openCache(), new cache size 92675 DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: virtualbox, 5.2.18, 4.15.0-45-lowlatency, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation HD Graphics 620 [8086:5916] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Lenovo HD Graphics 620 [17aa:224b] InstallationDate: Installed on 2017-07-24 (559 days ago) InstallationMedia: Xubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) MachineType: LENOVO 20HFCTO1WW ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-lowlatency root=UUID=8f8366ae-4d29-44cf-9b85-f83f1771eab1 ro quiet splash vt.handoff=1 SourcePackage: xorg UpgradeStatus: Upgraded to bionic on 2019-02-03 (0 days ago) dmi.bios.date: 09/14/2018 dmi.bios.vendor: LENOVO dmi.bios.version: N1WET51W (1.30 ) dmi.board.asset.tag: Not Available dmi.board.name: 20HFCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN1WET51W(1.30):bd09/14/2018:svnLENOVO:pn20HFCTO1WW:pvrThinkPadT470s:rvnLENOVO:rn20HFCTO1WW:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T470s dmi.product.name: 20HFCTO1WW dmi.product.version: ThinkPad T470s dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.95-1~18.04.1