[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
** Tags removed: foundations-todo -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: Fix Released Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
I tested on two machines where the boot failed previously. With the new `scripts/functions`, the boot now works properly. Thanks you! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: Fix Released Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
This bug was fixed in the package initramfs-tools - 0.142ubuntu15 --- initramfs-tools (0.142ubuntu15) mantic; urgency=medium * scripts/functions: do not fail to configure networking too quickly. In particular make sure an unsuccessful attempt to run DHCP takes at least $ROUNDTTT seconds. (LP: #2037202) -- Michael Hudson-Doyle Wed, 04 Oct 2023 12:02:13 +1300 ** Changed in: initramfs-tools (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: Fix Released Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
** Merge proposal linked: https://code.launchpad.net/~mwhudson/ubuntu/+source/initramfs-tools/+git/initramfs-tools/+merge/452586 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
https://code.launchpad.net/~mwhudson/ubuntu/+source/initramfs- tools/+git/initramfs-tools/+merge/452586 might be a fix? Not tested at all. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
Is the point here that dhcpcd -1 exits immediately if it finds no devices, even if it has a -t argument? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
Thanks for the precision Marian. Dimitri, do you know if the "sleep 1" works in practice? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
I request this to be considered release critical, as this prevents all kernel team & certification team deployments of mantic systems, inhibiting our ability to test SRUs on all architectures. ** Tags added: rls-mm-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
If I understand the process correctly, dhcpcd is already run in a loop. But the loop is over too quickly if the interface takes a few seconds to come up. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
Should dhcp really be oneshot? I don't know what dhclient was doing (I guess it was dhclient before) but it sounds difficult to synchronize this properly. I imagine it's also possible to run the dhcp client in oneshot mode in a loop with maybe 3 iterations and "sleep 1" in between. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
** Tags removed: rls-mm-incoming ** Tags added: foundations-todo -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
As a workaround, I added a `sleep 1` at the end of `_set_available_devices_to_up()` in `scripts/functions` in the Mantic initrd. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
** Tags added: rls-mm-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
** Description changed: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: - dhcpd-10.0.2 starting + dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot - dhcpd exited + dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. - Executing dhcpd now correctly gets IP addresses, but I don't know how to - continue the boot from there. + Executing dhcpcd now correctly gets IP addresses, but I don't know how + to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpcd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpcd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpcd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 2037202] Re: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up
** Tags added: mantic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu. https://bugs.launchpad.net/bugs/2037202 Title: Mantic/23.10: PXE boot tries to initialize DHCP before network link is up Status in initramfs-tools package in Ubuntu: New Bug description: I'm not sure whether this is the correct package for this bug, please reassign if not. I'm booting the Ubuntu Mantic/23.10 desktop beta image via PXE in order to perform an unattended installation. The kernel command line looks like that: iso/casper/vmlinuz --- ip=dhcp netboot=nfs nfsroot=192.168.1.1:/export/ubuntu autoinstall ds=nocloud\;s= This has worked perfectly before. However, in 23.10, the kernel tries to intialize DHCP before a network link is up. I can see a few instances of messages like the following: dhcpd-10.0.2 starting dev: loaded udev no interfaces have a carrier exiting due to oneshot dhcpd exited Then, the kernel tries to mount NFS, even though neither an IP address nor even a link is available: connect: Network is unreachable NFS over TCP not available from 192.168.1.1 This is repeated for a while. In between, a message tells that now the link is up: [10.0002805] e1000e :00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx The NFS messages repeat for a while, until the system gives up and I'm dropped into a busybox prompt. Executing dhcpd now correctly gets IP addresses, but I don't know how to continue the boot from there. The problem occurs on most physical machines that I tried, but not in VMs. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/2037202/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp