Re: [U-Boot] [PATCH] spl: add option to disable SPL banner output
Hi Philipp, > > On 25 Jan 2018, at 18:37, Lukasz Majewskiwrote: > > > > From: Anatolij Gustschin > > > > Selecting this option will reduce SPL boot time by approx. 6 ms > > (e. g. with 70 bytes long banner string at 115200 baud). > > > > Signed-off-by: Anatolij Gustschin > > Tested-by: Lukasz Majewski > > Reviewed-by: Philipp Tomsich > > See below for a nitpick. > > > --- > > > > common/spl/Kconfig | 7 +++ > > common/spl/spl.c | 2 ++ > > 2 files changed, 9 insertions(+) > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > index d686b1ecbd..d1f9cae6b7 100644 > > --- a/common/spl/Kconfig > > +++ b/common/spl/Kconfig > > @@ -118,6 +118,13 @@ config SPL_SEPARATE_BSS > > location is used. Normally we put the device tree at the > > end of BSS but with this option enabled, it goes at > > _image_binary_end. > > > > +config SPL_DISABLE_BANNER_PRINT > > + bool "Disable output of the SPL banner 'U-Boot SPL ...'" > > + help > > + If this option is enabled, SPL will not print the banner > > with version > > + info. Selecting this option could be useful to reduce > > SPL boot time > > + (e.g. approx. 6 ms slower, when output on i.MX6 with > > 1152000 baud). > > You seem to be off by “times 10” for the baud-rate. Extra boost :-) Fixed in v2. Thanks for spotting. > > > + > > config SPL_DISPLAY_PRINT > > bool "Display a board-specific message in SPL" > > help > > diff --git a/common/spl/spl.c b/common/spl/spl.c > > index 76c1963611..898c416a66 100644 > > --- a/common/spl/spl.c > > +++ b/common/spl/spl.c > > @@ -477,8 +477,10 @@ void preloader_console_init(void) > > > > gd->have_console = 1; > > > > +#ifndef CONFIG_SPL_DISABLE_BANNER_PRINT > > puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ > > U_BOOT_TIME ")\n"); > > +#endif > > #ifdef CONFIG_SPL_DISPLAY_PRINT > > spl_display_print(); > > #endif > > -- > > 2.11.0 > > > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de pgpO0yrCuAdJs.pgp Description: OpenPGP digital signature ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH] spl: add option to disable SPL banner output
> On 25 Jan 2018, at 18:37, Lukasz Majewskiwrote: > > From: Anatolij Gustschin > > Selecting this option will reduce SPL boot time by approx. 6 ms > (e. g. with 70 bytes long banner string at 115200 baud). > > Signed-off-by: Anatolij Gustschin > Tested-by: Lukasz Majewski Reviewed-by: Philipp Tomsich See below for a nitpick. > --- > > common/spl/Kconfig | 7 +++ > common/spl/spl.c | 2 ++ > 2 files changed, 9 insertions(+) > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > index d686b1ecbd..d1f9cae6b7 100644 > --- a/common/spl/Kconfig > +++ b/common/spl/Kconfig > @@ -118,6 +118,13 @@ config SPL_SEPARATE_BSS > location is used. Normally we put the device tree at the end of BSS > but with this option enabled, it goes at _image_binary_end. > > +config SPL_DISABLE_BANNER_PRINT > + bool "Disable output of the SPL banner 'U-Boot SPL ...'" > + help > + If this option is enabled, SPL will not print the banner with version > + info. Selecting this option could be useful to reduce SPL boot time > + (e.g. approx. 6 ms slower, when output on i.MX6 with 1152000 baud). You seem to be off by “times 10” for the baud-rate. > + > config SPL_DISPLAY_PRINT > bool "Display a board-specific message in SPL" > help > diff --git a/common/spl/spl.c b/common/spl/spl.c > index 76c1963611..898c416a66 100644 > --- a/common/spl/spl.c > +++ b/common/spl/spl.c > @@ -477,8 +477,10 @@ void preloader_console_init(void) > > gd->have_console = 1; > > +#ifndef CONFIG_SPL_DISABLE_BANNER_PRINT > puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ > U_BOOT_TIME ")\n"); > +#endif > #ifdef CONFIG_SPL_DISPLAY_PRINT > spl_display_print(); > #endif > -- > 2.11.0 > ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
[U-Boot] [PATCH] spl: add option to disable SPL banner output
From: Anatolij GustschinSelecting this option will reduce SPL boot time by approx. 6 ms (e. g. with 70 bytes long banner string at 115200 baud). Signed-off-by: Anatolij Gustschin Tested-by: Lukasz Majewski --- common/spl/Kconfig | 7 +++ common/spl/spl.c | 2 ++ 2 files changed, 9 insertions(+) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index d686b1ecbd..d1f9cae6b7 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -118,6 +118,13 @@ config SPL_SEPARATE_BSS location is used. Normally we put the device tree at the end of BSS but with this option enabled, it goes at _image_binary_end. +config SPL_DISABLE_BANNER_PRINT + bool "Disable output of the SPL banner 'U-Boot SPL ...'" + help + If this option is enabled, SPL will not print the banner with version + info. Selecting this option could be useful to reduce SPL boot time + (e.g. approx. 6 ms slower, when output on i.MX6 with 1152000 baud). + config SPL_DISPLAY_PRINT bool "Display a board-specific message in SPL" help diff --git a/common/spl/spl.c b/common/spl/spl.c index 76c1963611..898c416a66 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -477,8 +477,10 @@ void preloader_console_init(void) gd->have_console = 1; +#ifndef CONFIG_SPL_DISABLE_BANNER_PRINT puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ U_BOOT_TIME ")\n"); +#endif #ifdef CONFIG_SPL_DISPLAY_PRINT spl_display_print(); #endif -- 2.11.0 ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot