> -Original Message-
> From: Fabio Estevam [mailto:feste...@gmail.com]
> Sent: 2019年2月26日 20:36
> To: sba...@denx.de
> Cc: dl-uboot-imx ; Peng Fan ;
> Abel Vesa ; u-boot@lists.denx.de; Fabio Estevam
>
> Subject: [PATCH 1/2] mx6sabresd: README: Adjust the binary name after DM
> conversion
>
> After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix
> the README file accordingly.
>
> Signed-off-by: Fabio Estevam
Acked-by: Peng Fan
> ---
> board/freescale/mx6sabresd/README | 18 +-
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/board/freescale/mx6sabresd/README
> b/board/freescale/mx6sabresd/README
> index 4b4df06330..4ea4454b9f 100644
> --- a/board/freescale/mx6sabresd/README
> +++ b/board/freescale/mx6sabresd/README
> @@ -21,15 +21,15 @@ $ make mx6sabresd_defconfig
>
> $ make
>
> -This will generate the SPL and u-boot.img binaries.
> +This will generate the SPL and u-boot-dtb.img binaries.
>
> - Flash the SPL binary into the SD card:
>
> $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
>
> -- Flash the u-boot.img binary into the SD card:
> +- Flash the u-boot-dtb.img binary into the SD card:
>
> -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
> +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
>
>
> 2. Booting from eMMC
> @@ -39,7 +39,7 @@ $ make mx6sabresd_defconfig
>
> $ make
>
> -This will generate the SPL and u-boot.img binaries.
> +This will generate the SPL and u-boot-dtb.img binaries.
>
> - Boot first from SD card as shown in the previous section
>
> @@ -51,10 +51,10 @@ Mount the eMMC in the host PC:
>
> => ums 0 mmc 2
>
> -- Flash SPL and u-boot.img binaries into the eMMC:
> +- Flash SPL and u-boot-dtb.img binaries into the eMMC:
>
> $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync -$ sudo dd
> if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
> +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
>
> Set SW6 to eMMC 8-bit boot: 11010110
>
> @@ -65,15 +65,15 @@ Set SW6 to eMMC 8-bit boot: 11010110 $ make
> mx6sabresd_defconfig $ make
>
> -This will generate the SPL image called SPL and the u-boot.img.
> +This will generate the SPL image called SPL and the u-boot-dtb.img.
>
> - Flash the SPL image into the SD card:
>
> $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync
>
> -- Flash the u-boot.img image into the SD card:
> +- Flash the u-boot-dtb.img image into the SD card:
>
> -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none
> && sync
> +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync
> +status=none && sync
>
> Create a partition for root file system and extract it there:
>
> --
> 2.17.1
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
