> -----Original Message----- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2019年2月26日 20:36 > To: sba...@denx.de > Cc: dl-uboot-imx <uboot-...@nxp.com>; Peng Fan <peng....@nxp.com>; > Abel Vesa <abel.v...@nxp.com>; u-boot@lists.denx.de; Fabio Estevam > <feste...@gmail.com> > Subject: [PATCH 1/2] mx6sabresd: README: Adjust the binary name after DM > conversion > > After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix > the README file accordingly. > > Signed-off-by: Fabio Estevam <feste...@gmail.com>
Acked-by: Peng Fan <peng....@nxp.com> > --- > board/freescale/mx6sabresd/README | 18 +++++++++--------- > 1 file changed, 9 insertions(+), 9 deletions(-) > > diff --git a/board/freescale/mx6sabresd/README > b/board/freescale/mx6sabresd/README > index 4b4df06330..4ea4454b9f 100644 > --- a/board/freescale/mx6sabresd/README > +++ b/board/freescale/mx6sabresd/README > @@ -21,15 +21,15 @@ $ make mx6sabresd_defconfig > > $ make > > -This will generate the SPL and u-boot.img binaries. > +This will generate the SPL and u-boot-dtb.img binaries. > > - Flash the SPL binary into the SD card: > > $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync > > -- Flash the u-boot.img binary into the SD card: > +- Flash the u-boot-dtb.img binary into the SD card: > > -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync > +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync > > > 2. Booting from eMMC > @@ -39,7 +39,7 @@ $ make mx6sabresd_defconfig > > $ make > > -This will generate the SPL and u-boot.img binaries. > +This will generate the SPL and u-boot-dtb.img binaries. > > - Boot first from SD card as shown in the previous section > > @@ -51,10 +51,10 @@ Mount the eMMC in the host PC: > > => ums 0 mmc 2 > > -- Flash SPL and u-boot.img binaries into the eMMC: > +- Flash SPL and u-boot-dtb.img binaries into the eMMC: > > $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync -$ sudo dd > if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync > +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync > > Set SW6 to eMMC 8-bit boot: 11010110 > > @@ -65,15 +65,15 @@ Set SW6 to eMMC 8-bit boot: 11010110 $ make > mx6sabresd_defconfig $ make > > -This will generate the SPL image called SPL and the u-boot.img. > +This will generate the SPL image called SPL and the u-boot-dtb.img. > > - Flash the SPL image into the SD card: > > $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync > > -- Flash the u-boot.img image into the SD card: > +- Flash the u-boot-dtb.img image into the SD card: > > -$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none > && sync > +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync > +status=none && sync > > Create a partition for root file system and extract it there: > > -- > 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot