Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
> Subject: Re: Booting MX6 via Serial Download after DM conversion > > On Thu, Apr 25, 2019 at 3:53 AM Fabio Estevam > wrote: > > > > Hi Peng, > > > > On Tue, Apr 23, 2019 at 11:18 PM Peng Fan wrote: > > > > > Not try this. > > > uuu should support SPL file being loaded, then if SPL could runs > > > into fastboot mode to interactive with uuu, then u-boot-dtb.img could be > loaded I think. > > > > My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU > > tool and it also failed. > > > > Could you please try to fix this regression? > > fyi: we did see the same issue, look like FIT is incompatible with these > device > boot scenarios even HAB failed (which I tried before) with LOAD_FIT and > OF_LIST. You mean SPL FIT + HAB to verify U-Boot on i.MX6Q failed, right? It needs some special handling to use SPL FIT HAB which is not supported in upstream or vendor tree for i.MX6. i.MX8M do have SPL FIT HAB in vendor tree. Regards, Peng. ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
On Thu, Apr 25, 2019 at 3:53 AM Fabio Estevam wrote: > > Hi Peng, > > On Tue, Apr 23, 2019 at 11:18 PM Peng Fan wrote: > > > Not try this. > > uuu should support SPL file being loaded, then if SPL could runs into > > fastboot mode > > to interactive with uuu, then u-boot-dtb.img could be loaded I think. > > My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU > tool and it also failed. > > Could you please try to fix this regression? fyi: we did see the same issue, look like FIT is incompatible with these device boot scenarios even HAB failed (which I tried before) with LOAD_FIT and OF_LIST. ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
On Tue, Apr 30, 2019 at 02:39:17PM -0300, Fabio Estevam wrote: > Hi Tom, > > On Mon, Apr 29, 2019 at 2:57 PM Tom Rini wrote: > > > imx_usb is doing some checking of the second binary it sends along? > > That sounds odd to start with, is there some specific history there? > > My understanding is that imx_usb_loader expects to find a valid IVT entry. > > After the conversion to DM, a FIT image is used on > mx6sabresd_defconfig and such IVT can no longer be found, causing > imx_usb_loader to fail to loading u-boot-dtb.img. > > It would be nice if we can come up with a solution, as loosing the > ability to load via imx_usb_loader has a negative impact for users. Right, what I'm getting at is, why does imx_usb_loader need to find a specific anything in the binary? What is that IVT used for exactly? -- Tom signature.asc Description: PGP signature ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Tom, On Mon, Apr 29, 2019 at 2:57 PM Tom Rini wrote: > imx_usb is doing some checking of the second binary it sends along? > That sounds odd to start with, is there some specific history there? My understanding is that imx_usb_loader expects to find a valid IVT entry. After the conversion to DM, a FIT image is used on mx6sabresd_defconfig and such IVT can no longer be found, causing imx_usb_loader to fail to loading u-boot-dtb.img. It would be nice if we can come up with a solution, as loosing the ability to load via imx_usb_loader has a negative impact for users. ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
On Thu, Apr 25, 2019 at 07:17:21AM +, Peng Fan wrote: > Hi Fabio, > > > -Original Message- > > From: Fabio Estevam [mailto:feste...@gmail.com] > > Sent: 2019年4月25日 6:23 > > To: Peng Fan > > Cc: Abel Vesa ; Stefano Babic ; > > Lukasz Majewski ; Michael Trimarchi > > ; dl-uboot-imx ; > > Jagan Teki ; Marcel Ziswiler > > ; U-Boot-Denx ; > > Adam Ford ; Ye Li ; Otavio Salvador > > ; Breno Matheus Lima > > Subject: Re: Booting MX6 via Serial Download after DM conversion > > > > Hi Peng, > > > > On Tue, Apr 23, 2019 at 11:18 PM Peng Fan wrote: > > > > > Not try this. > > > uuu should support SPL file being loaded, then if SPL could runs into > > > fastboot mode to interactive with uuu, then u-boot-dtb.img could be loaded > > I think. > > > > My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU tool and > > it also failed. > > > > Could you please try to fix this regression? > > After check, it is not U-Boot issue, it is imx_usb should update to support > new u-boot-dtb.img. > > With your patch, file u-boot-dtb.img > u-boot-dtb.img: u-boot legacy uImage, U-Boot 2019.04-00664-gdbe9a81ff0\270, > Firmware/ARM, > Firmware Image (Not compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load > Address: > 0x1780, Entry Point: 0x, Header CRC: 0xCBE07038, Data CRC: > 0x2C710405 > > without your patch, file u-boot-dtb.img > u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, string > block size=139, DT > structure block size=1204 > > Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. So > need fix imx_usb > to support both legacy and new image format. imx_usb is doing some checking of the second binary it sends along? That sounds odd to start with, is there some specific history there? Thanks! -- Tom signature.asc Description: PGP signature ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
> -Original Message- > From: Peng Fan > Sent: Thursday, April 25, 2019 8:52 AM > To: Fabio Estevam > Cc: Abel Vesa ; Stefano Babic ; > Lukasz Majewski ; Michael Trimarchi > ; dl-uboot-imx ; > Jagan Teki ; Marcel Ziswiler > ; U-Boot-Denx ; > Adam Ford ; Ye Li ; Otavio Salvador > ; Breno Matheus Lima ; > Frank Li > Subject: RE: Booting MX6 via Serial Download after DM conversion > > > > Subject: Re: Booting MX6 via Serial Download after DM conversion > > > > Hi Peng, > > > > On Thu, Apr 25, 2019 at 4:17 AM Peng Fan wrote: > > > > > After check, it is not U-Boot issue, it is imx_usb should update to > > > support > > new u-boot-dtb.img. > > > > > > With your patch, file u-boot-dtb.img > > > u-boot-dtb.img: u-boot legacy uImage, U-Boot > > > 2019.04-00664-gdbe9a81ff0\270, Firmware/ARM, Firmware Image (Not > > compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load Address: > > > 0x1780, Entry Point: 0x, Header CRC: 0xCBE07038, Data > > CRC: > > > 0x2C710405 > > > > > > without your patch, file u-boot-dtb.img > > > u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, > > > string block size=139, DT structure block size=1204 > > > > > > Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. > > > So need fix imx_usb to support both legacy and new image format. > > > > This issue also affects the UUU tool as well. > > > > Is there a fix for UUU? [Frank Li] If follow up i.MX8MM method, uuu needn't change. > > NXP software not enable SPL for this board, so I think UUU might not support > it. But UUU support SPL + FIT for i.MX8MM, uuu might work for this board. I > do not have time to check uuu side recently. > Let me check whether others have time on this. > > Regards, > Peng. ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
> Subject: Re: Booting MX6 via Serial Download after DM conversion > > Hi Peng, > > On Thu, Apr 25, 2019 at 4:17 AM Peng Fan wrote: > > > After check, it is not U-Boot issue, it is imx_usb should update to support > new u-boot-dtb.img. > > > > With your patch, file u-boot-dtb.img > > u-boot-dtb.img: u-boot legacy uImage, U-Boot > > 2019.04-00664-gdbe9a81ff0\270, Firmware/ARM, Firmware Image (Not > compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load Address: > > 0x1780, Entry Point: 0x, Header CRC: 0xCBE07038, Data > CRC: > > 0x2C710405 > > > > without your patch, file u-boot-dtb.img > > u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, > > string block size=139, DT structure block size=1204 > > > > Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. > > So need fix imx_usb to support both legacy and new image format. > > This issue also affects the UUU tool as well. > > Is there a fix for UUU? NXP software not enable SPL for this board, so I think UUU might not support it. But UUU support SPL + FIT for i.MX8MM, uuu might work for this board. I do not have time to check uuu side recently. Let me check whether others have time on this. Regards, Peng. ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Peng, On Thu, Apr 25, 2019 at 4:17 AM Peng Fan wrote: > After check, it is not U-Boot issue, it is imx_usb should update to support > new u-boot-dtb.img. > > With your patch, file u-boot-dtb.img > u-boot-dtb.img: u-boot legacy uImage, U-Boot 2019.04-00664-gdbe9a81ff0\270, > Firmware/ARM, > Firmware Image (Not compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load > Address: > 0x1780, Entry Point: 0x, Header CRC: 0xCBE07038, Data CRC: > 0x2C710405 > > without your patch, file u-boot-dtb.img > u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, string > block size=139, DT > structure block size=1204 > > Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. So > need fix imx_usb > to support both legacy and new image format. This issue also affects the UUU tool as well. Is there a fix for UUU? ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Fabio, > -Original Message- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2019年4月25日 6:23 > To: Peng Fan > Cc: Abel Vesa ; Stefano Babic ; > Lukasz Majewski ; Michael Trimarchi > ; dl-uboot-imx ; > Jagan Teki ; Marcel Ziswiler > ; U-Boot-Denx ; > Adam Ford ; Ye Li ; Otavio Salvador > ; Breno Matheus Lima > Subject: Re: Booting MX6 via Serial Download after DM conversion > > Hi Peng, > > On Tue, Apr 23, 2019 at 11:18 PM Peng Fan wrote: > > > Not try this. > > uuu should support SPL file being loaded, then if SPL could runs into > > fastboot mode to interactive with uuu, then u-boot-dtb.img could be loaded > I think. > > My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU tool and > it also failed. > > Could you please try to fix this regression? After check, it is not U-Boot issue, it is imx_usb should update to support new u-boot-dtb.img. With your patch, file u-boot-dtb.img u-boot-dtb.img: u-boot legacy uImage, U-Boot 2019.04-00664-gdbe9a81ff0\270, Firmware/ARM, Firmware Image (Not compressed), 490914 bytes, Thu Apr 25 07:26:46 2019, Load Address: 0x1780, Entry Point: 0x, Header CRC: 0xCBE07038, Data CRC: 0x2C710405 without your patch, file u-boot-dtb.img u-boot-dtb.img: Device Tree Blob version 17, size=1399, boot CPU=0, string block size=139, DT structure block size=1204 Actually now u-boot-dtb.img is a FIT image with a device tree wrapper. So need fix imx_usb to support both legacy and new image format. Regards, Peng. > > Thanks ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
> Subject: Re: Booting MX6 via Serial Download after DM conversion > > Hi Peng, > > On Tue, Apr 23, 2019 at 11:18 PM Peng Fan wrote: > > > Not try this. > > uuu should support SPL file being loaded, then if SPL could runs into > > fastboot mode to interactive with uuu, then u-boot-dtb.img could be loaded > I think. > > My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU tool and > it also failed. > > Could you please try to fix this regression? Things become complicated, there is no enough on chip ram for SPL DM, such as regulator/pinctrl/usb. Regards, Peng. > > Thanks ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Peng, On Tue, Apr 23, 2019 at 11:18 PM Peng Fan wrote: > Not try this. > uuu should support SPL file being loaded, then if SPL could runs into > fastboot mode > to interactive with uuu, then u-boot-dtb.img could be loaded I think. My colleague Breno tried to load SPL + u-boot-dtb.img using the UUU tool and it also failed. Could you please try to fix this regression? Thanks ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Fabio > -Original Message- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2019年4月24日 10:01 > To: Peng Fan ; Abel Vesa > Cc: Stefano Babic ; Lukasz Majewski ; > Michael Trimarchi ; dl-uboot-imx > ; Jagan Teki ; Marcel > Ziswiler ; U-Boot-Denx > ; Adam Ford ; Ye Li > ; Otavio Salvador > Subject: Re: Booting MX6 via Serial Download after DM conversion > > Hi Peng and Abel, > > On Mon, Apr 22, 2019 at 11:00 PM Peng Fan wrote: > > > Honestly I am not familiar with imx_usb, we use mfgtool previously and not > uuu tool. > > Is the UUU tool capable of loading SPL + u-boot-dtb.img generated from > mainline U-Boot for mx6sabresd? Not try this. uuu should support SPL file being loaded, then if SPL could runs into fastboot mode to interactive with uuu, then u-boot-dtb.img could be loaded I think. Regards, Peng. > > Thanks ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Peng and Abel, On Mon, Apr 22, 2019 at 11:00 PM Peng Fan wrote: > Honestly I am not familiar with imx_usb, we use mfgtool previously and not > uuu tool. Is the UUU tool capable of loading SPL + u-boot-dtb.img generated from mainline U-Boot for mx6sabresd? Thanks ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Peng, On Mon, Apr 22, 2019 at 11:00 PM Peng Fan wrote: > Honestly I am not familiar with imx_usb, we use mfgtool previously and not > uuu tool. > Would you share where to download imx_usb and any doc, > Then we will debug this issue. You can get imx_usb_loader tool from https://github.com/boundarydevices/imx_usb_loader Install it, connect the board in USB download mode and then: sudo ./imx_usb SPL sudo ./imx_usb u-boot-dtb.img I suggest you to try U-boot 2019.01 first, which works fine and then 2019.04, which is broken. I could get imx usb loader to successfully load 2019.04 if I manually change the defconfig like this: --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -12,8 +12,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y -CONFIG_SPL_FIT_PRINT=y -CONFIG_SPL_LOAD_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -21,7 +19,6 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOUNCE_BUFFER=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_OS_BOOT=y @@ -56,15 +53,10 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_EFI_PARTITION=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd" CONFIG_OF_LIST="imx6q-sabresd imx6qp-sabresd imx6dl-sabresd" -CONFIG_MULTI_DTB_FIT=y -CONFIG_SPL_MULTI_DTB_FIT=y -CONFIG_SPL_OF_LIST="imx6dl-sabresd imx6q-sabresd imx6qp-sabresd" CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SPL_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x1200 CONFIG_FASTBOOT_BUF_SIZE=0x1000 @@ -95,6 +87,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y -CONFIG_DM_VIDEO=y -CONFIG_VIDEO_IPUV3=y # CONFIG_VIDEO_SW_CURSOR is not set ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
On Mon, Apr 22, 2019 at 9:00 PM Peng Fan wrote: > > Hi Fabio > > > Subject: Booting MX6 via Serial Download after DM conversion > > > > Hi, > > > > Has anyone managed to boot i.MX6 via serial download protocol after the > > conversion to DM? > I 'think' the DM conversion requires the USB Driver to be defined as UCLASS_USB_GADGET_GENERIC in order to be used as a peripheral. I have been following one of the TI boards [1] who's USB Driver has a bind tool that go through the device tree and looks to see if the "dr_mode" entry and then binds the appropriate driver (either HOST or GADGET). I started a conversion on this, so I have a patch I can sent to people, but I haven't gotten the GADGET side working, but I have a binder function that then loads the host driver when "dr_mode" is set to host. I haven't had a lot of time to try and figure out the GADGET side of things yet. If someone wants me to send the a patch for what I have so far, I can do that, but it only supports host mode. I am fairly certain all gadget devices are broken on i.MX6 with DM_USB enabled, so in SPL, I had to disable DM_USB in order to maintain the SDP tool compatibility in SPL. [1] - http://git.denx.de/?p=u-boot.git;a=commitdiff;h=7d98dbcc3dc8f1b93676d0953f3bee0db3796eb0 adam > Include Abel who did the conversion. > > > > > On a mx6sabresd I can no longer boot via SDP running 2019.04: > > > > After running 'sudo ./imx_usb SPL' I get: > > Honestly I am not familiar with imx_usb, we use mfgtool previously and not > uuu tool. > Would you share where to download imx_usb and any doc, > Then we will debug this issue. > > Thanks, > Peng. > > > > > U-Boot SPL 2019.04 (Apr 22 2019 - 19:45:46 -0300) Trying to boot from USB > > SDP > > SDP: initialize... > > SDP: handle requests.. > > > > Then I load the u-boot-dtb.img binary and the following error is seen: > > > > $ sudo ./imx_usb u-boot-dtb.img > > config file > > vid=0x066f pid=0x3780 file_name=mx23_usb_work.conf > > vid=0x15a2 pid=0x004f file_name=mx28_usb_work.conf > > vid=0x15a2 pid=0x0052 file_name=mx50_usb_work.conf > > vid=0x15a2 pid=0x0054 file_name=mx6_usb_work.conf > > vid=0x15a2 pid=0x0061 file_name=mx6_usb_work.conf > > vid=0x15a2 pid=0x0063 file_name=mx6_usb_work.conf > > vid=0x15a2 pid=0x0071 file_name=mx6_usb_work.conf > > vid=0x15a2 pid=0x007d file_name=mx6_usb_work.conf > > vid=0x15a2 pid=0x0080 file_name=mx6_usb_work.conf > > vid=0x1fc9 pid=0x0128 file_name=mx6_usb_work.conf > > vid=0x15a2 pid=0x0076 file_name=mx7_usb_work.conf > > vid=0x1fc9 pid=0x0126 file_name=mx7ulp_usb_work.conf > > vid=0x15a2 pid=0x0041 file_name=mx51_usb_work.conf > > vid=0x15a2 pid=0x004e file_name=mx53_usb_work.conf > > vid=0x15a2 pid=0x006a file_name=vybrid_usb_work.conf vid=0x066f > > pid=0x37ff file_name=linux_gadget.conf > > vid=0x1b67 pid=0x4fff file_name=mx6_usb_sdp_spl.conf > > vid=0x0525 pid=0xb4a4 file_name=mx6_usb_sdp_spl.conf > > vid=0x1fc9 pid=0x012b file_name=mx8mq_usb_work.conf config file > > > > parse /usr/etc/imx-loader.d//mx6_usb_sdp_spl.conf > > Trying to open device vid=0x0525 pid=0xb4a4 Interface 0 claimed HAB > > security state: development mode (0x56787856) == work item filename > > u-boot-dtb.img load_size 0 bytes load_addr 0x dcd 1 clear_dcd 0 > > plug 1 jump_mode 3 jump_addr 0x == end work item header not > > found 8400:2e77d044, 4000 do_download failed, err=-22 HAB security state: > > development mode (0x56787856) > > > > With 2019.01 (prior to DM conversion) I can boot via SDP just fine. > > > > Does anyone have any suggestions? > > > > Thanks, > > > > Fabio Estevam ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] Booting MX6 via Serial Download after DM conversion
Hi Fabio > Subject: Booting MX6 via Serial Download after DM conversion > > Hi, > > Has anyone managed to boot i.MX6 via serial download protocol after the > conversion to DM? Include Abel who did the conversion. > > On a mx6sabresd I can no longer boot via SDP running 2019.04: > > After running 'sudo ./imx_usb SPL' I get: Honestly I am not familiar with imx_usb, we use mfgtool previously and not uuu tool. Would you share where to download imx_usb and any doc, Then we will debug this issue. Thanks, Peng. > > U-Boot SPL 2019.04 (Apr 22 2019 - 19:45:46 -0300) Trying to boot from USB > SDP > SDP: initialize... > SDP: handle requests.. > > Then I load the u-boot-dtb.img binary and the following error is seen: > > $ sudo ./imx_usb u-boot-dtb.img > config file > vid=0x066f pid=0x3780 file_name=mx23_usb_work.conf > vid=0x15a2 pid=0x004f file_name=mx28_usb_work.conf > vid=0x15a2 pid=0x0052 file_name=mx50_usb_work.conf > vid=0x15a2 pid=0x0054 file_name=mx6_usb_work.conf > vid=0x15a2 pid=0x0061 file_name=mx6_usb_work.conf > vid=0x15a2 pid=0x0063 file_name=mx6_usb_work.conf > vid=0x15a2 pid=0x0071 file_name=mx6_usb_work.conf > vid=0x15a2 pid=0x007d file_name=mx6_usb_work.conf > vid=0x15a2 pid=0x0080 file_name=mx6_usb_work.conf > vid=0x1fc9 pid=0x0128 file_name=mx6_usb_work.conf > vid=0x15a2 pid=0x0076 file_name=mx7_usb_work.conf > vid=0x1fc9 pid=0x0126 file_name=mx7ulp_usb_work.conf > vid=0x15a2 pid=0x0041 file_name=mx51_usb_work.conf > vid=0x15a2 pid=0x004e file_name=mx53_usb_work.conf > vid=0x15a2 pid=0x006a file_name=vybrid_usb_work.conf vid=0x066f > pid=0x37ff file_name=linux_gadget.conf > vid=0x1b67 pid=0x4fff file_name=mx6_usb_sdp_spl.conf > vid=0x0525 pid=0xb4a4 file_name=mx6_usb_sdp_spl.conf > vid=0x1fc9 pid=0x012b file_name=mx8mq_usb_work.conf config file > > parse /usr/etc/imx-loader.d//mx6_usb_sdp_spl.conf > Trying to open device vid=0x0525 pid=0xb4a4 Interface 0 claimed HAB > security state: development mode (0x56787856) == work item filename > u-boot-dtb.img load_size 0 bytes load_addr 0x dcd 1 clear_dcd 0 > plug 1 jump_mode 3 jump_addr 0x == end work item header not > found 8400:2e77d044, 4000 do_download failed, err=-22 HAB security state: > development mode (0x56787856) > > With 2019.01 (prior to DM conversion) I can boot via SDP just fine. > > Does anyone have any suggestions? > > Thanks, > > Fabio Estevam ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot