[U2] UV 10.2/ AIX question
I see from the product matrix on IBM's web site that we should be able to run 10.2.x on AIX 5.2 (yes I know its kinda old) is anyone aware of any specific UV (or AIX) reasons that we would want to upgrade to 5.3 before installing UV 10.2.x? We NEED to upgrade I am just wondering if we HAVE to upgrade or if there is a compelling reason to upgrade the OS related to UV 10.2 the system is a 570 (yep its old too) thanks all, dougc --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] UV 10.2/ AIX question
Doug, IBM recycles 'product line' numbers, so saying that you have a 570 and that's it old doesn't help much... If you do a prtconf | more, the first few lines provide the complete model number, serial number, etc., machine architecture, and OS bit-level (32 or 64), which could then be used to gauge exactly how old the system is and see if there is any benefit to upgrading AIX to 5.3. IBM used to say that on the same p5 platform (your 570 may or may not be p5), upgrading from AIX 5.2 to AIX 5.3 had an inherent performance boost without replacing or upgrading any hardware. Another benefit to upgrading to AIX 5.3 is that, with the advent of AIX 6.1, AIX 5.2 is now on the short road for support longevity (although I haven't recently looked it up) without paying an additional charge. Lastly, keeping up with AIX as you keep up with UniVerse makes sense, IMHO. I don't know that I want to go to 6.1 as yet, though; last time I checked the matrix, UniVerse 10.2 still wasn't 'ported' or supported on AIX 6.1. Regards, Bob Wyatt -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of doug chanco Sent: Thursday, May 29, 2008 10:12 To: u2-users@listserver.u2ug.org Subject: [U2] UV 10.2/ AIX question I see from the product matrix on IBM's web site that we should be able to run 10.2.x on AIX 5.2 (yes I know its kinda old) is anyone aware of any specific UV (or AIX) reasons that we would want to upgrade to 5.3 before installing UV 10.2.x? We NEED to upgrade I am just wondering if we HAVE to upgrade or if there is a compelling reason to upgrade the OS related to UV 10.2 the system is a 570 (yep its old too) thanks all, dougc --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
[U2] Redback/SB+ Interface Failing
After doing a data refresh (from Unix, remove the old data account/dir, copy the live data account to the test account, fix VOC pointers as needed, etc.), I am no longer able to get Redback and System Builder to link up. We have done data refreshes many times in the past w/o any problems. In a nutshell, my instructions from our vendor were: Delete VOC APP.IDS RUN WWPROGS ENABLE.RBO RUN WWPROGS WW.INITIATE etc, etc... The problem appears to be coming from step 3 - WW.INITIATE. It is giving me the following 2 lines: Redback Application NOT created! WW.INITIATE completed successfully. Based on the 1st line, I don't see how the 2nd can be accurate, but that is another topic. Does anyone have any experience with this? Both our vendor and IBM seem to be clueless about a realistic solution. I have gone so far as to do a 2nd data refresh taking painstaking notes and sending these off, but I still do not have any reply. I have also done a CLEAN.SYSTEM in my test account per their advice. I still need to schedule some down time to run CLEAN.SYSTEM in the SB account itself, but I have been functionally down for a month with one of my apps with absolutely zero progress made. John --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] Redback/SB+ Interface Failing
The problem appears to be coming from step 3 - WW.INITIATE. It is giving me the following 2 lines: Redback Application NOT created! WW.INITIATE completed successfully. ... Does anyone have any experience with this? Both our vendor and IBM seem to be clueless about a realistic solution. I have gone so far as to do a 2nd data refresh taking painstaking notes and sending these off, but I still do not have any reply. I have also done a CLEAN.SYSTEM in my test account per their advice. I still need to schedule some down time to run CLEAN.SYSTEM in the SB account itself, but I have been functionally down for a month with one of my apps with absolutely zero progress made. Just a thought here ... I have seen the same thing happen after a refresh. Check to see whether your license is current, or whether it needs to be re-authorized (for Redback). Have seen this exact scenario at least 3 times ... each with a refresh ... and each time, needing to re-license Redback. As always YMMV. Regards, Robert John --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ mail2web.com Enhanced email for the mobile individual based on Microsoft. Exchange - http://link.mail2web.com/Personal/EnhancedEmail --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] Redback/SB+ Interface Failing
[EMAIL PROTECTED] wrote: snip the useful response about licensing after refreshing As always YMMV. snip I *know* this acronym means Your Mileage May Vary, but a friend once re-defined it for me, and I'll share his interpretation with the list, because it never fails to make me laugh when I see it used, particularly when the poster is being polite and helpful as Robert was... You Make Me Vomit Is it five o'clock yet? -- Allen Egerton aegerton at pobox dot com --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] Redback/SB+ Interface Failing
OK, I admit I never thought of that, but my other accounts are working, so initially, this does not sound like it would be the problem. However, after a month, I am willing to try anything! How do I find the licensing info for Redback? John Israel Sr. Programmer/Analyst Dayton Superior Corporation 721 Richard St. Dayton, OH 45342 937-866-0711 x44380 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, May 29, 2008 1:53 PM To: u2-users@listserver.u2ug.org; u2-users@listserver.u2ug.org Subject: RE: [U2] Redback/SB+ Interface Failing The problem appears to be coming from step 3 - WW.INITIATE. It is giving me the following 2 lines: Redback Application NOT created! WW.INITIATE completed successfully. ... Does anyone have any experience with this? Both our vendor and IBM seem to be clueless about a realistic solution. I have gone so far as to do a 2nd data refresh taking painstaking notes and sending these off, but I still do not have any reply. I have also done a CLEAN.SYSTEM in my test account per their advice. I still need to schedule some down time to run CLEAN.SYSTEM in the SB account itself, but I have been functionally down for a month with one of my apps with absolutely zero progress made. Just a thought here ... I have seen the same thing happen after a refresh. Check to see whether your license is current, or whether it needs to be re-authorized (for Redback). Have seen this exact scenario at least 3 times ... each with a refresh ... and each time, needing to re-license Redback. As always YMMV. Regards, Robert John --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ mail2web.com Enhanced email for the mobile individual based on Microsoft. Exchange - http://link.mail2web.com/Personal/EnhancedEmail --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
[U2] Uniobjects for Java
Hello, I have been working with Uniobjects for Java on my Windows machine and I am ready to move some stuff up to our Linux based web server. Do I get the libraries off of the client CD? Or do I need to download the packages form the Internet? If so, where do I get them? Charles Shaffer Senior Analyst NTN-Bower Corporation --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
