Re: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg
For your information, I had to know of repeated cases where Windows 2003 cannot reboot when the SharedSection third parameter of the Windows registry entry in question = 8192. An US U2 Technical Support Analyst told me : The quoted Technical Bulletin is titled Maximizing performances for UniVerse systems - updated for UniVerse 9.5.1F... So, theorically, the document wouldn't apply after this (old) UniVerse release... ;-) In fact, we know that it can apply until release 9.6.x and on Windows versions earlier than Windows 2003. But, definitively : - Windows 2003 manages Desktop heap differently than previous Windows versions (This may have become dynamic... and... this point is not documented by Microsoft) - UniVerse Telnet Service at version 10.0.x have the option to Interact with Desktop, which makes useless for the need of the database this Windows tuning. - UniVerse Telnet Service + UniRPC Service at release 10.1 are both able to Interact with Desktop, and the need for this Windows tuning totally disappears. I answered individually to the initial message. Regards, Hervi BALESTRIERI Support Technique Avanci - IBM Data Management - Produits U2 Web : http://www.ibm.com/software/u2/ - Forwarded by Herve Balestrieri/France/IBM on 23/07/2004 15:34 - Adrian Matthews Adrian.Matthews@ igindex.co.uk To Sent by: [EMAIL PROTECTED] [EMAIL PROTECTED] cc stserver.u2ug.org Subject RE: [U2] UV on Win2003, refusing 23/07/2004 12:41 new logins, UniAdmin issues RPC errmsg Please respond to u2-users Try this registry change using RegEdit. You won't be able to run more than 60 sessions without this change on Windows. \HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control \SessionManager\SubSystems\Windows If the value is 1024,3072,512, change 512 to 3072. It is in one of the UV manuals somewhere... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Walter Sent: 22 July 2004 18:04 To: [EMAIL PROTECTED] Subject: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg This is about UV 10.1.x on Win2003 server. I'm completely baffled by this recurring situation. It goes like this - universe is up and running, lots of users connected, life is wonderful. Sporadically - about two or three times in each 24 hour period - the system gets into a state where it will not accept any new Universe logins. Users already logged are often unaffected, but any attempt to start a new session with Dynamic Connect gets the message [Connection Aborted] right away - before telnet prompts for username/password are presented. When the system is in this state, any attempt to use UniAdmin results in an error message something like 'RPC error 1' - I'm not sure if that is the exact error message, but that's the gist of it. Tried stop/start all universe services and every time the Universe Resource and Universe Telnet services FAIL to restart, but the RPC service restarts correctly. Only way out is to reboot the server - which is a big hassle of course and make for very unhappy users and sysadmins ;-( Any ideas comments on this will be highly appreciated. Thanks much, joe People Technology delivering results http://www.ClientsFirst-US.com Joe Walter Phone-Direct : 330.867.3851 Senior Product Engineer - Central RegionPhone-Direct : 330.990.9081 Phone-Main : 866.732.9191 26380 Curtiss Wright Parkway, Suite 108 Fax/Voice Mail : 435.514.5132 Cleveland, OH 44143 mailto:[EMAIL PROTECTED] --- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/ The information contained in this email is strictly confidential and for the use of the addressee only, unless otherwise indicated. If you are not the intended recipient, please do not read, copy, use or disclose to others this message or any
RE: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg
Interesting seeing that people are still being told to use this setting by Vars (and IBM) post 9.6 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Herve Balestrieri Sent: 23 July 2004 15:00 To: [EMAIL PROTECTED] Subject: Re: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg For your information, I had to know of repeated cases where Windows 2003 cannot reboot when the SharedSection third parameter of the Windows registry entry in question = 8192. An US U2 Technical Support Analyst told me : The quoted Technical Bulletin is titled Maximizing performances for UniVerse systems - updated for UniVerse 9.5.1F... So, theorically, the document wouldn't apply after this (old) UniVerse release... ;-) In fact, we know that it can apply until release 9.6.x and on Windows versions earlier than Windows 2003. But, definitively : - Windows 2003 manages Desktop heap differently than previous Windows versions (This may have become dynamic... and... this point is not documented by Microsoft) - UniVerse Telnet Service at version 10.0.x have the option to Interact with Desktop, which makes useless for the need of the database this Windows tuning. - UniVerse Telnet Service + UniRPC Service at release 10.1 are both able to Interact with Desktop, and the need for this Windows tuning totally disappears. I answered individually to the initial message. Regards, Hervi BALESTRIERI Support Technique Avanci - IBM Data Management - Produits U2 Web : http://www.ibm.com/software/u2/ - Forwarded by Herve Balestrieri/France/IBM on 23/07/2004 15:34 - Adrian Matthews Adrian.Matthews@ igindex.co.uk To Sent by: [EMAIL PROTECTED] [EMAIL PROTECTED] cc stserver.u2ug.org Subject RE: [U2] UV on Win2003, refusing 23/07/2004 12:41 new logins, UniAdmin issues RPC errmsg Please respond to u2-users Try this registry change using RegEdit. You won't be able to run more than 60 sessions without this change on Windows. \HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control \SessionManager\SubSystems\Windows If the value is 1024,3072,512, change 512 to 3072. It is in one of the UV manuals somewhere... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Walter Sent: 22 July 2004 18:04 To: [EMAIL PROTECTED] Subject: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg This is about UV 10.1.x on Win2003 server. I'm completely baffled by this recurring situation. It goes like this - universe is up and running, lots of users connected, life is wonderful. Sporadically - about two or three times in each 24 hour period - the system gets into a state where it will not accept any new Universe logins. Users already logged are often unaffected, but any attempt to start a new session with Dynamic Connect gets the message [Connection Aborted] right away - before telnet prompts for username/password are presented. When the system is in this state, any attempt to use UniAdmin results in an error message something like 'RPC error 1' - I'm not sure if that is the exact error message, but that's the gist of it. Tried stop/start all universe services and every time the Universe Resource and Universe Telnet services FAIL to restart, but the RPC service restarts correctly. Only way out is to reboot the server - which is a big hassle of course and make for very unhappy users and sysadmins ;-( Any ideas comments on this will be highly appreciated. Thanks much, joe People Technology delivering results http://www.ClientsFirst-US.com Joe Walter Phone-Direct : 330.867.3851 Senior Product Engineer - Central RegionPhone-Direct : 330.990.9081 Phone-Main : 866.732.9191 26380 Curtiss Wright Parkway, Suite 108 Fax/Voice Mail : 435.514.5132 Cleveland, OH 44143 mailto:[EMAIL PROTECTED] --- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/ The information contained in this email is strictly confidential and for the use of the addressee only, unless otherwise indicated. If you are not the intended recipient, please do not read, copy, use or disclose to others this message or any attachment. Please also notify the sender by replying to this email or by telephone +44 (0)20 7896 0011 and then delete the email and any copies of it. Opinions, conclusions (etc.) that do not relate to the official business of this company shall be understood as neither given nor endorsed by it. IG Markets Limited and IG Index Plc are authorised and regulated by the Financial Services Authority and, in Australia, by the Australian Securities
RE: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg
Thanks Jordan. I wish licensing was the cause, but unfortunately it's something far more insidious than that. For awhile I was starting to think it had something to do with this gigabit NIC card on the new server. The LAN is only wired for 10/100MBPS. When we set the rate on the network card down to 100MBPS it seemed the condition did not occurr as frequently. Now I'm not certain if that's true or not. joe -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Jordan Sent: Thursday, July 22, 2004 6:06 PM To: [EMAIL PROTECTED] Subject: RE: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg Have you checked the user license count using the Uv license tool. Users may not be exiting gracefully and are leaving the license locked on the server. To clean this use UvLicTool with the clean option to release these licenses. You will find it in the /uv/uv/bin directory. It has options to report licenses or fix license count. This can occur if a program has a fatal that logsout the system. Other issues can be where users exit the Dynamic Connect client without first logging out. Regards David Jordan snip --- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg
Have you checked the user license count using the Uv license tool. Users may not be exiting gracefully and are leaving the license locked on the server. To clean this use UvLicTool with the clean option to release these licenses. You will find it in the /uv/uv/bin directory. It has options to report licenses or fix license count. This can occur if a program has a fatal that logsout the system. Other issues can be where users exit the Dynamic Connect client without first logging out. Regards David Jordan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Walter Sent: Friday, 23 July 2004 3:04 AM To: [EMAIL PROTECTED] Subject: [U2] UV on Win2003, refusing new logins, UniAdmin issues RPC errmsg This is about UV 10.1.x on Win2003 server. I'm completely baffled by this recurring situation. It goes like this - universe is up and running, lots of users connected, life is wonderful. Sporadically - about two or three times in each 24 hour period - the system gets into a state where it will not accept any new Universe logins. Users already logged are often unaffected, but any attempt to start a new session with Dynamic Connect gets the message [Connection Aborted] right away - before telnet prompts for username/password are presented. When the system is in this state, any attempt to use UniAdmin results in an error message something like 'RPC error 1' - I'm not sure if that is the exact error message, but that's the gist of it. Tried stop/start all universe services and every time the Universe Resource and Universe Telnet services FAIL to restart, but the RPC service restarts correctly. Only way out is to reboot the server - which is a big hassle of course and make for very unhappy users and sysadmins ;-( Any ideas comments on this will be highly appreciated. Thanks much, joe People Technology delivering results http://www.ClientsFirst-US.com Joe Walter Phone-Direct : 330.867.3851 Senior Product Engineer - Central RegionPhone-Direct : 330.990.9081 Phone-Main : 866.732.9191 26380 Curtiss Wright Parkway, Suite 108 Fax/Voice Mail : 435.514.5132 Cleveland, OH 44143 mailto:[EMAIL PROTECTED] --- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list [EMAIL PROTECTED] To unsubscribe please visit http://listserver.u2ug.org/