date:20180130

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread Mathew Howard

The max transmit power for 3.65ghz depends on what channel width you're using. 
If it's using 2' dishes, the antenna gain should be somewhere around 26dbi. I 
think you can go up to like 44db (or maybe 46... I don't remember for sure off 
hand) EIRP if you're using the full 40mhz channel, so transmit power should be 
like 20dbm max with 2' dishes.



From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of 
CBB - Jay Fuller [par...@cyberbroadband.net]
Sent: Tuesday, January 30, 2018 11:01 AM
To: Ubiquiti Users Group
Subject: [Ubnt_users] airfiber 3


When configuring airfiber 3, what should the transmit output power be, and what 
should the antenna gain be?
We are using rocketdishes.
Thanks!

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread Mike Goicoechea

Are you using out of band management? Check eirp also. We have seen the
airfiber throttle down one sides power down.

Mike Goicoechea

Cielo Systems International | 806.977.9001 ext 101| m...@cielosystems.net

Skype Mike. Goik| www.cielosystems.net  |

 


 

  


From:   on behalf of CBB - Jay Fuller

Reply-To:  Ubiquiti Users Group 
Date:  Tuesday, January 30, 2018 at 11:41 AM
To:  Ubiquiti Users Group 
Subject:  Re: [Ubnt_users] airfiber 3

 
I wish.  Wouldn't be using 3.65 if it were LOS
 
>  
> - Original Message -
>  
> From:  Josh Luthman 
>  
> To: Ubiquiti Users Group 
>  
> Sent: Tuesday, January 30, 2018 11:38  AM
>  
> Subject: Re: [Ubnt_users] airfiber 3
>  
> 
>  
> LOS?
> 
>  
> Josh  Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100  Wayne St
> Suite 1337
> Troy, OH 45373
>  
> 
>  
> On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" 
> wrote:
>  
>>  
>>  
>>  
>>  
>> we are seeing a "chain inbalanace" and having a hard  time fixing it
>>  
>>  
>>  
>> one end of the link (local) is -55 / -56
>>  
>> the other end is like -56 / -78
>>  
>>  
>>  
>> it has killed the throughput of the link
>>  
>>  
>>  
>> bad radio?
>>  
>>  
>>  
>>>  
>>> - Original Message -
>>>  
>>> From: CBB - Jay Fuller 
>>>  
>>> To: Ubiquiti Users Group 
>>>  
>>> Sent: Tuesday, January 30, 2018 11:09  AM
>>>  
>>> Subject: Re: [Ubnt_users] airfiber  3
>>>  
>>> 
>>>  
>>>  
>>>  
>>> not my department...
>>>  
>>>  
>>>  
  
 - Original Message -
  
 From: Josh Luthman 
  
 To: Ubiquiti Users  Group 
  
 Sent: Tuesday, January 30, 2018  11:02 AM
  
 Subject: Re: [Ubnt_users] airfiber  3
  
 
  
 Did you submit and get a green light from Cheryl  Black?  That's where your
 power should be detailed...
 
  
  
  
  
 
 Josh Luthman
 Office: 937-552-2340 
 Direct: 937-552-2343 
 1100 Wayne St
 Suite  1337
 Troy, OH 45373
 
  
 On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay  Fuller
  wrote:
  
>  
>  
>  
>  
> When configuring airfiber 3, what should the  transmit output power be,
> and what should the antenna gain  be?
>  
> We are using rocketdishes.
>  
> Thanks!
>  
>  
> 
> ___
> Ubnt_users  mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
> 
 
  
 
  
 
  
 
 ___
 Ubnt_users  mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users
  
 
>>>  
>>> 
>>>  
>>> 
>>>  
>>> 
>>> ___
>>> Ubnt_users  mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>  
>>> 
>> 
>> ___
>> Ubnt_users  mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>  
> 
>  
> 
>  
> 
> ___
> Ubnt_users mailing  list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
___ Ubnt_users mailing list
Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread Josh Luthman

Did the issue follow the connectors?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Jan 30, 2018 12:48 PM, "CBB - Jay Fuller" 
wrote:

>
> no, link has been here at least two years.  not sure what is up.
> powercode did not alert us to the problem and the signal issue has been
> going on about a month.  we've checked both ends and even swapped
> connectors.  moving towards bad radio.
>
>
> - Original Message -
> *From:* Josh Luthman 
> *To:* Ubiquiti Users Group 
> *Sent:* Tuesday, January 30, 2018 11:47 AM
> *Subject:* Re: [Ubnt_users] airfiber 3
>
> Did you track the signals over time?  If lost signal, more than likely bad
> radio.
>
> Is this a new link?
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller" 
> wrote:
>
>>
>> I wish.  Wouldn't be using 3.65 if it were LOS
>>
>>
>> - Original Message -
>> *From:* Josh Luthman 
>> *To:* Ubiquiti Users Group 
>> *Sent:* Tuesday, January 30, 2018 11:38 AM
>> *Subject:* Re: [Ubnt_users] airfiber 3
>>
>> LOS?
>>
>> Josh Luthman
>> Office: 937-552-2340 <(937)%20552-2340>
>> Direct: 937-552-2343 <(937)%20552-2343>
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" 
>> wrote:
>>
>>>
>>> we are seeing a "chain inbalanace" and having a hard time fixing it
>>>
>>> one end of the link (local) is -55 / -56
>>> the other end is like -56 / -78
>>>
>>> it has killed the throughput of the link
>>>
>>> bad radio?
>>>
>>>
>>> - Original Message -
>>> *From:* CBB - Jay Fuller 
>>> *To:* Ubiquiti Users Group 
>>> *Sent:* Tuesday, January 30, 2018 11:09 AM
>>> *Subject:* Re: [Ubnt_users] airfiber 3
>>>
>>>
>>> not my department...
>>>
>>>
>>> - Original Message -
>>> *From:* Josh Luthman 
>>> *To:* Ubiquiti Users Group 
>>> *Sent:* Tuesday, January 30, 2018 11:02 AM
>>> *Subject:* Re: [Ubnt_users] airfiber 3
>>>
>>> Did you submit and get a green light from Cheryl Black?  That's where
>>> your power should be detailed...
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340 <(937)%20552-2340>
>>> Direct: 937-552-2343 <(937)%20552-2343>
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>> On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <
>>> par...@cyberbroadband.net> wrote:
>>>

 When configuring airfiber 3, what should the transmit output power be,
 and what should the antenna gain be?
 We are using rocketdishes.
 Thanks!


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


>>> --
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>> --
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>> --
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>> --
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread CBB - Jay Fuller


no, link has been here at least two years.  not sure what is up.  powercode did 
not alert us to the problem and the signal issue has been going on about a 
month.  we've checked both ends and even swapped connectors.  moving towards 
bad radio.  

  - Original Message - 
  From: Josh Luthman 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:47 AM
  Subject: Re: [Ubnt_users] airfiber 3


  Did you track the signals over time?  If lost signal, more than likely bad 
radio.


  Is this a new link?



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373


  On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller"  
wrote:


I wish.  Wouldn't be using 3.65 if it were LOS

  - Original Message - 
  From: Josh Luthman 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:38 AM
  Subject: Re: [Ubnt_users] airfiber 3


  LOS?


  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373


  On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller"  
wrote:


we are seeing a "chain inbalanace" and having a hard time fixing it

one end of the link (local) is -55 / -56
the other end is like -56 / -78

it has killed the throughput of the link

bad radio?

  - Original Message - 
  From: CBB - Jay Fuller 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:09 AM
  Subject: Re: [Ubnt_users] airfiber 3



  not my department...

- Original Message - 
From: Josh Luthman 
To: Ubiquiti Users Group 
Sent: Tuesday, January 30, 2018 11:02 AM
Subject: Re: [Ubnt_users] airfiber 3


Did you submit and get a green light from Cheryl Black?  That's 
where your power should be detailed... 




Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller 
 wrote:


  When configuring airfiber 3, what should the transmit output 
power be, and what should the antenna gain be?
  We are using rocketdishes.
  Thanks!



  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users









___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users





--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users




___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users




--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users



___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users




--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread Josh Luthman

Did you track the signals over time?  If lost signal, more than likely bad
radio.

Is this a new link?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller" 
wrote:

>
> I wish.  Wouldn't be using 3.65 if it were LOS
>
>
> - Original Message -
> *From:* Josh Luthman 
> *To:* Ubiquiti Users Group 
> *Sent:* Tuesday, January 30, 2018 11:38 AM
> *Subject:* Re: [Ubnt_users] airfiber 3
>
> LOS?
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" 
> wrote:
>
>>
>> we are seeing a "chain inbalanace" and having a hard time fixing it
>>
>> one end of the link (local) is -55 / -56
>> the other end is like -56 / -78
>>
>> it has killed the throughput of the link
>>
>> bad radio?
>>
>>
>> - Original Message -
>> *From:* CBB - Jay Fuller 
>> *To:* Ubiquiti Users Group 
>> *Sent:* Tuesday, January 30, 2018 11:09 AM
>> *Subject:* Re: [Ubnt_users] airfiber 3
>>
>>
>> not my department...
>>
>>
>> - Original Message -
>> *From:* Josh Luthman 
>> *To:* Ubiquiti Users Group 
>> *Sent:* Tuesday, January 30, 2018 11:02 AM
>> *Subject:* Re: [Ubnt_users] airfiber 3
>>
>> Did you submit and get a green light from Cheryl Black?  That's where
>> your power should be detailed...
>>
>>
>> Josh Luthman
>> Office: 937-552-2340 <(937)%20552-2340>
>> Direct: 937-552-2343 <(937)%20552-2343>
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <
>> par...@cyberbroadband.net> wrote:
>>
>>>
>>> When configuring airfiber 3, what should the transmit output power be,
>>> and what should the antenna gain be?
>>> We are using rocketdishes.
>>> Thanks!
>>>
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>> --
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>> --
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>> --
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread CBB - Jay Fuller


I wish.  Wouldn't be using 3.65 if it were LOS

  - Original Message - 
  From: Josh Luthman 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:38 AM
  Subject: Re: [Ubnt_users] airfiber 3


  LOS?


  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373


  On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller"  
wrote:


we are seeing a "chain inbalanace" and having a hard time fixing it

one end of the link (local) is -55 / -56
the other end is like -56 / -78

it has killed the throughput of the link

bad radio?

  - Original Message - 
  From: CBB - Jay Fuller 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:09 AM
  Subject: Re: [Ubnt_users] airfiber 3



  not my department...

- Original Message - 
From: Josh Luthman 
To: Ubiquiti Users Group 
Sent: Tuesday, January 30, 2018 11:02 AM
Subject: Re: [Ubnt_users] airfiber 3


Did you submit and get a green light from Cheryl Black?  That's where 
your power should be detailed... 




Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller 
 wrote:


  When configuring airfiber 3, what should the transmit output power 
be, and what should the antenna gain be?
  We are using rocketdishes.
  Thanks!



  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users









___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users




--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users



___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users




--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread Josh Luthman

LOS?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" 
wrote:

>
> we are seeing a "chain inbalanace" and having a hard time fixing it
>
> one end of the link (local) is -55 / -56
> the other end is like -56 / -78
>
> it has killed the throughput of the link
>
> bad radio?
>
>
> - Original Message -
> *From:* CBB - Jay Fuller 
> *To:* Ubiquiti Users Group 
> *Sent:* Tuesday, January 30, 2018 11:09 AM
> *Subject:* Re: [Ubnt_users] airfiber 3
>
>
> not my department...
>
>
> - Original Message -
> *From:* Josh Luthman 
> *To:* Ubiquiti Users Group 
> *Sent:* Tuesday, January 30, 2018 11:02 AM
> *Subject:* Re: [Ubnt_users] airfiber 3
>
> Did you submit and get a green light from Cheryl Black?  That's where your
> power should be detailed...
>
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <
> par...@cyberbroadband.net> wrote:
>
>>
>> When configuring airfiber 3, what should the transmit output power be,
>> and what should the antenna gain be?
>> We are using rocketdishes.
>> Thanks!
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
> --
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
> --
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread CBB - Jay Fuller


we are seeing a "chain inbalanace" and having a hard time fixing it

one end of the link (local) is -55 / -56
the other end is like -56 / -78

it has killed the throughput of the link

bad radio?

  - Original Message - 
  From: CBB - Jay Fuller 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:09 AM
  Subject: Re: [Ubnt_users] airfiber 3



  not my department...

- Original Message - 
From: Josh Luthman 
To: Ubiquiti Users Group 
Sent: Tuesday, January 30, 2018 11:02 AM
Subject: Re: [Ubnt_users] airfiber 3


Did you submit and get a green light from Cheryl Black?  That's where your 
power should be detailed... 




Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller 
 wrote:


  When configuring airfiber 3, what should the transmit output power be, 
and what should the antenna gain be?
  We are using rocketdishes.
  Thanks!



  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users









___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users



--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread CBB - Jay Fuller


not my department...

  - Original Message - 
  From: Josh Luthman 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:02 AM
  Subject: Re: [Ubnt_users] airfiber 3


  Did you submit and get a green light from Cheryl Black?  That's where your 
power should be detailed...




  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373


  On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller 
 wrote:


When configuring airfiber 3, what should the transmit output power be, and 
what should the antenna gain be?
We are using rocketdishes.
Thanks!



___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users






--


  ___
  Ubnt_users mailing list
  Ubnt_users@wispa.org
  http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

2018-01-30 Thread Josh Luthman

Did you submit and get a green light from Cheryl Black?  That's where your
power should be detailed...


Josh Luthman
Office: 937-552-2340 <(937)%20552-2340>
Direct: 937-552-2343 <(937)%20552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <
par...@cyberbroadband.net> wrote:

>
> When configuring airfiber 3, what should the transmit output power be, and
> what should the antenna gain be?
> We are using rocketdishes.
> Thanks!
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] airfiber 3

2018-01-30 Thread CBB - Jay Fuller


When configuring airfiber 3, what should the transmit output power be, and what 
should the antenna gain be?
We are using rocketdishes.
Thanks!

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

Re: [Ubnt_users] airfiber 3

[Ubnt_users] airfiber 3

11 matches

Site Navigation

Mail list logo

Footer information