no, link has been here at least two years.  not sure what is up.  powercode did 
not alert us to the problem and the signal issue has been going on about a 
month.  we've checked both ends and even swapped connectors.  moving towards 
bad radio.  

  ----- Original Message ----- 
  From: Josh Luthman 
  To: Ubiquiti Users Group 
  Sent: Tuesday, January 30, 2018 11:47 AM
  Subject: Re: [Ubnt_users] airfiber 3


  Did you track the signals over time?  If lost signal, more than likely bad 
radio.


  Is this a new link?



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373


  On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller" <[email protected]> 
wrote:


    I wish.  Wouldn't be using 3.65 if it were LOS

      ----- Original Message ----- 
      From: Josh Luthman 
      To: Ubiquiti Users Group 
      Sent: Tuesday, January 30, 2018 11:38 AM
      Subject: Re: [Ubnt_users] airfiber 3


      LOS?


      Josh Luthman
      Office: 937-552-2340
      Direct: 937-552-2343
      1100 Wayne St
      Suite 1337
      Troy, OH 45373


      On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <[email protected]> 
wrote:


        we are seeing a "chain inbalanace" and having a hard time fixing it

        one end of the link (local) is -55 / -56
        the other end is like -56 / -78

        it has killed the throughput of the link

        bad radio?

          ----- Original Message ----- 
          From: CBB - Jay Fuller 
          To: Ubiquiti Users Group 
          Sent: Tuesday, January 30, 2018 11:09 AM
          Subject: Re: [Ubnt_users] airfiber 3



          not my department...

            ----- Original Message ----- 
            From: Josh Luthman 
            To: Ubiquiti Users Group 
            Sent: Tuesday, January 30, 2018 11:02 AM
            Subject: Re: [Ubnt_users] airfiber 3


            Did you submit and get a green light from Cheryl Black?  That's 
where your power should be detailed... 




            Josh Luthman
            Office: 937-552-2340
            Direct: 937-552-2343
            1100 Wayne St
            Suite 1337
            Troy, OH 45373


            On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller 
<[email protected]> wrote:


              When configuring airfiber 3, what should the transmit output 
power be, and what should the antenna gain be?
              We are using rocketdishes.
              Thanks!



              _______________________________________________
              Ubnt_users mailing list
              [email protected]
              http://lists.wispa.org/mailman/listinfo/ubnt_users






--------------------------------------------------------------------


            _______________________________________________
            Ubnt_users mailing list
            [email protected]
            http://lists.wispa.org/mailman/listinfo/ubnt_users





----------------------------------------------------------------------


          _______________________________________________
          Ubnt_users mailing list
          [email protected]
          http://lists.wispa.org/mailman/listinfo/ubnt_users




        _______________________________________________
        Ubnt_users mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/ubnt_users




--------------------------------------------------------------------------


      _______________________________________________
      Ubnt_users mailing list
      [email protected]
      http://lists.wispa.org/mailman/listinfo/ubnt_users



    _______________________________________________
    Ubnt_users mailing list
    [email protected]
    http://lists.wispa.org/mailman/listinfo/ubnt_users




------------------------------------------------------------------------------


  _______________________________________________
  Ubnt_users mailing list
  [email protected]
  http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to