[Bug 1492621] Re: Cannot start VMs without routable IPv4 address
** Description changed: qemu will not start VMs using spice or vnc displays unless there is a routable IPv4 address on the machine, even though the error relates to 127.0.0.1 root@athens:~# ip addr - 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default - link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 - inet 127.0.0.1/8 scope host lo -valid_lft forever preferred_lft forever - inet6 ::1/128 scope host -valid_lft forever preferred_lft forever + 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever 2: em1: mtu 1500 qdisc mq master ovs-system state UP group default qlen 1000 - link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff - inet6 fe80::a6ba:dbff:fe32:4c6b/64 scope link -valid_lft forever preferred_lft forever + link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff + inet6 fe80::a6ba:dbff:fe32:4c6b/64 scope link + valid_lft forever preferred_lft forever 3: em2: mtu 1500 qdisc mq master ovs-system state UP group default qlen 1000 - link/ether a4:ba:db:32:4c:6c brd ff:ff:ff:ff:ff:ff - inet6 fe80::a6ba:dbff:fe32:4c6c/64 scope link -valid_lft forever preferred_lft forever - 4: ovs-system: mtu 1500 qdisc noop state DOWN group default - link/ether a6:01:71:d4:b2:71 brd ff:ff:ff:ff:ff:ff - 5: br0: mtu 1500 qdisc noqueue state UNKNOWN group default - link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff - inet6 2606:a000:a461:4500:a6ba:dbff:fe32:4c6b/64 scope global mngtmpaddr dynamic -valid_lft 86292sec preferred_lft 14292sec - inet6 fe80::c03d:22ff:fea5:3034/64 scope link -valid_lft forever preferred_lft forever + link/ether a4:ba:db:32:4c:6c brd ff:ff:ff:ff:ff:ff + inet6 fe80::a6ba:dbff:fe32:4c6c/64 scope link + valid_lft forever preferred_lft forever + 4: ovs-system: mtu 1500 qdisc noop state DOWN group default + link/ether a6:01:71:d4:b2:71 brd ff:ff:ff:ff:ff:ff + 5: br0: mtu 1500 qdisc noqueue state UNKNOWN group default + link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff + inet6 2606:a000:a461:4500:a6ba:dbff:fe32:4c6b/64 scope global mngtmpaddr dynamic + valid_lft 86292sec preferred_lft 14292sec + inet6 fe80::c03d:22ff:fea5:3034/64 scope link + valid_lft forever preferred_lft forever root@athens:~# virsh start icarus error: Failed to start domain icarus error: internal error: process exited while connecting to monitor: ((null):4086): Spice-Warning **: reds.c:2330:reds_init_socket: getaddrinfo(127.0.0.1,5900): Address family for hostname not supported 2015-09-05T17:43:39.911871Z qemu-system-x86_64: failed to initialize spice server root@athens:~# dhclient br0 root@athens:~# ip addr - 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default - link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 - inet 127.0.0.1/8 scope host lo -valid_lft forever preferred_lft forever - inet6 ::1/128 scope host -valid_lft forever preferred_lft forever + 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever 2: em1: mtu 1500 qdisc mq master ovs-system state UP group default qlen 1000 - link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff - inet6 fe80::a6ba:dbff:fe32:4c6b/64 scope link -valid_lft forever preferred_lft forever + link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff + inet6 fe80::a6ba:dbff:fe32:4c6b/64 scope link + valid_lft forever preferred_lft forever 3: em2: mtu 1500 qdisc mq master ovs-system state UP group default qlen 1000 - link/ether a4:ba:db:32:4c:6c brd ff:ff:ff:ff:ff:ff - inet6 fe80::a6ba:dbff:fe32:4c6c/64 scope link -valid_lft forever preferred_lft forever - 4: ovs-system: mtu 1500 qdisc noop state DOWN group default - link/ether a6:01:71:d4:b2:71 brd ff:ff:ff:ff:ff:ff - 5: br0: mtu 1500 qdisc noqueue state UNKNOWN group default - link/ether a4:ba:db:32:4c:6b brd ff:ff:ff:ff:ff:ff - inet 172.31.3.106/24 brd 172.31.3.255 scope global br0 -valid_lft forever preferred_lft forever - inet6 2606:a000:a461:4500:a6ba:dbff:fe32:4c6b/64 scope global mngtmpaddr dynamic -valid_lft 86335sec preferred_lft 14335sec - inet6 fe80::a6ba:dbff:fe32:4c6b/64 scope link -valid_lft forever preferred_lft forever + link/ether a4:ba:db:32:4c:6c brd ff:ff:ff:ff:ff:ff + inet6 fe80::a6ba:dbff:fe32:4c6c/64 scope link + valid_lft forever preferred_lft forever + 4: ovs-system: mtu 1500 qdisc noop state DOWN
[Bug 1941988] Re: Designate DNS – Secondary zone is failed to be created and gets into the ERROR status
upper-constraints was updated in yoga to 2.1.0, so yoga forward this issue is resolved. ** Changed in: designate Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1941988 Title: Designate DNS – Secondary zone is failed to be created and gets into the ERROR status To manage notifications about this bug go to: https://bugs.launchpad.net/charm-designate/+bug/1941988/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1947756] Re: indicator-cpufreq gtk
I also encountered this issue, Ubuntu 21.10. Workaround proposed by Mario Di Nicola (warp99) worked for me as well (editing the python script to import GTK 3.0). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1947756 Title: indicator-cpufreq gtk To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-cpufreq/+bug/1947756/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1940976] Re: Race condition in zone serial generation on concurrent changes to recordsets
Yes, that is what I am asking about. The configuration setting: [coordination] backend_url = Such that the threads are using the distributed lock manager. You can also look for this warning message: https://github.com/openstack/designate/blob/05343d4226822da8b9776201ea18e000d366573d/designate/coordination.py#L72 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1940976 Title: Race condition in zone serial generation on concurrent changes to recordsets To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1940976/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1940976] Re: Race condition in zone serial generation on concurrent changes to recordsets
Did you have the distributed locking service enabled, even for the single process deployment? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1940976 Title: Race condition in zone serial generation on concurrent changes to recordsets To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1940976/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890314] Re: RFE HAProxy 2.2 for groovy
*** This bug is a duplicate of bug 1892871 *** https://bugs.launchpad.net/bugs/1892871 Thank you! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890314 Title: RFE HAProxy 2.2 for groovy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/haproxy/+bug/1890314/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785171] Re: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection
FYI, I have been running on the latest version of this driver from Intel without issue for months now. It appears to be resolved in the upstream driver. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1785171 Title: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1785171/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890314] [NEW] RFE HAProxy 2.2 for groovy
Public bug reported: Is there any chance of getting HAProxy 2.2.x (LTS) into the 20.10 groovy release? ** Affects: haproxy (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890314 Title: RFE HAProxy 2.2 for groovy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/haproxy/+bug/1890314/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1889704] [NEW] package grub-efi-amd64-signed 1.66.26+2.02~beta2-36ubuntu3.26 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: ?? ProblemType: Package DistroRelease: Ubuntu 16.04 Package: grub-efi-amd64-signed 1.66.26+2.02~beta2-36ubuntu3.26 ProcVersionSignature: Ubuntu 4.4.0-186.216-lowlatency 4.4.228 Uname: Linux 4.4.0-186-lowlatency x86_64 ApportVersion: 2.20.1-0ubuntu2.23 Architecture: amd64 Date: Thu Jul 30 21:02:20 2020 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2016-06-13 (1509 days ago) InstallationMedia: Ubuntu-Studio 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) RelatedPackageVersions: dpkg 1.18.4ubuntu1.6 apt 1.2.32ubuntu0.1 SourcePackage: grub2-signed Title: package grub-efi-amd64-signed 1.66.26+2.02~beta2-36ubuntu3.26 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub2-signed (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1889704 Title: package grub-efi-amd64-signed 1.66.26+2.02~beta2-36ubuntu3.26 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2-signed/+bug/1889704/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878974] Re: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
I was unable to get driverless printing working from local machine. I was able to get driverless printing working from Network, but to configure this printer on a WiFi network I required a different computer with working software (was able to borrow a Windows system with working software). Once the printer was on the network (WiFi in this case) I was able to get basic driverless printing working. HP software still not working, and USB printing still not working. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878974 Title: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1878974/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1881874] Re: Unable to launch Loadbalancer from Horizon Dashboard
The above error is from an Ussuri or newer version of octavia-dashboard. Please install the Train version of Octavia dashboard. Specifically, you have Ussuri or newer octavia-dashboard and openstacksdk from Train or older. Train did not support availability zones. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1881874 Title: Unable to launch Loadbalancer from Horizon Dashboard To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-ansible/+bug/1881874/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878974] Re: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
Seems to be the same bug as 1881401 , although the other one may have a better description. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878974 Title: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1878974/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1881401] Re: HPLIP, hp-doctor, hp-check should support Ubuntu 20.04 LTS with its package base
Seems to be the same bug as 1878974 , although this one may have a better description. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1881401 Title: HPLIP, hp-doctor, hp-check should support Ubuntu 20.04 LTS with its package base To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1881401/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878974] Re: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
Also as requested,
Anyone with problems here, please
- If you have a Snap of HPLIP installed, uninstall it, the one I know of is
experimental
>no snap installed
$ snap list
Name Version Rev Tracking Publisher
Notes
canonical-livepatch 9.5.5 95latest/stablecanonical✓ -
core 16-2.44.3 9066 latest/stablecanonical✓ core
core18 202004271754 latest/stablecanonical✓ base
gnome-3-34-1804 0+git.3009fc7 33latest/stable/… canonical✓ -
gtk-common-themes0.1-36-gc75f853 1506 latest/stable/… canonical✓ -
snap-store 3.36.0-80-g208fd61 454 latest/stable/… canonical✓ -
vlc 3.0.10 1620 latest/stablevideolan✓ -
- Remove any HPLIP version installed directly from HP
->done
- Re-install Ubuntu's HPLIP via the command:
->done
sudo apt install --reinstall printer-driver-hpcups
printer-driver-postscript-hp libsane-hpaio hplip-gui hplip hplip-data libhpmud0
->done
Please post the output of this command here.
-
:~$ sudo apt install --reinstall printer-driver-hpcups
printer-driver-postscript-hp libsane-hpaio hplip-gui hplip hplip-data libhpmud0
[sudo] password for :
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-headers-5.4.0-29 linux-headers-5.4.0-29-generic
linux-image-5.4.0-29-generic linux-modules-5.4.0-29-generic
linux-modules-extra-5.4.0-29-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 7 reinstalled, 0 to remove and 0 not upgraded.
Need to get 0 B/8,271 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ... 322326 files and directories currently installed.)
Preparing to unpack .../0-printer-driver-postscript-hp_3.20.3+dfsg0-2_amd64.deb
...
Unpacking printer-driver-postscript-hp (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2)
...
Preparing to unpack .../1-libsane-hpaio_3.20.3+dfsg0-2_amd64.deb ...
Unpacking libsane-hpaio:amd64 (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../2-hplip_3.20.3+dfsg0-2_amd64.deb ...
Unpacking hplip (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../3-hplip-data_3.20.3+dfsg0-2_all.deb ...
Unpacking hplip-data (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../4-hplip-gui_3.20.3+dfsg0-2_all.deb ...
Unpacking hplip-gui (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../5-libhpmud0_3.20.3+dfsg0-2_amd64.deb ...
Unpacking libhpmud0:amd64 (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2) ...
Preparing to unpack .../6-printer-driver-hpcups_3.20.3+dfsg0-2_amd64.deb ...
Unpacking printer-driver-hpcups (3.20.3+dfsg0-2) over (3.20.3+dfsg0-2) ...
Setting up hplip-data (3.20.3+dfsg0-2) ...
Setting up printer-driver-postscript-hp (3.20.3+dfsg0-2) ...
Setting up libhpmud0:amd64 (3.20.3+dfsg0-2) ...
Setting up libsane-hpaio:amd64 (3.20.3+dfsg0-2) ...
Setting up printer-driver-hpcups (3.20.3+dfsg0-2) ...
Setting up hplip (3.20.3+dfsg0-2) ...
Creating/updating hplip user account...
Setting up hplip-gui (3.20.3+dfsg0-2) ...
Processing triggers for bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu2) ...
Rebuilding /usr/share/applications/bamf-2.index...
Processing triggers for desktop-file-utils (0.24-1ubuntu2) ...
Processing triggers for mime-support (3.64ubuntu1) ...
Processing triggers for cups (2.3.1-9ubuntu1.1) ...
Processing triggers for gnome-menus (3.36.0-1ubuntu1) ...
Processing triggers for libc-bin (2.31-0ubuntu9) ...
Processing triggers for man-db (2.9.1-1) ...
Processing triggers for dbus (1.12.16-2ubuntu2) ...
-
- Remove your current print queues with the command:
lpadmin -x QUEUE_NAME
Replace QUEUE_NAME by the name of your print queue, as it is shown in the
output of "lpstat -v"
-> done
- Unplug the printer from USB and re-plug it. Does a new print queue get
created ("lpstat -v" should show it)? Can you print using this queue?
It did not, it looks like app armor issues in the dmesg log:
-
[ 672.163397] usb 2-2.4: USB disconnect, device number 4
[ 679.495774] usb 2-2.4: new high-speed USB device number 8 using xhci_hcd
[ 679.516313] usb 2-2.4: New USB device found, idVendor=03f0, idProduct=0053,
bcdDevice= 1.00
[ 679.516319] usb 2-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 679.516323] usb 2-2.4: Product: DeskJet 2600 series
[ 679.516325] usb 2-2.4: Manufacturer: HP
[ 679.516328] usb 2-2.4: SerialNumber: CN9348C3ZY06PS
[ 679.523334] usblp 2-2.4:1.1: usblp0: USB Bidirectional printer dev 8 if 1
alt 0 proto 2 vid 0x03F0 pid 0x0053
[ 679.742191] usb 2-2.4: usbfs: process 3664 (ippusbxd) did not claim
interface 0 before use
[ 679.748844] usblp0: removed
[ 679.769311] kauditd_printk_skb: 10 callbacks suppressed
[ 679.769313] audit: type=1400
[Bug 1878974] Re: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
Sorry for the delayed response. In response to my own comment, I'm still seeing that log about missing "/usr/lib/cups/backend/hp" But it actually exists (i didn't copy it) ~$ ls -al /usr/lib/cups/backend/hp -rwxr-xr-x 1 root root 22832 Mar 31 23:51 /usr/lib/cups/backend/hp Anyway as requested, "dpkg -l | grep hplip" output: ~$ dpkg -l | grep hplip ii hplip 3.20.3+dfsg0-2 amd64HP Linux Printing and Imaging System (HPLIP) ii hplip-data3.20.3+dfsg0-2 all HP Linux Printing and Imaging - data files ii hplip-gui 3.20.3+dfsg0-2 all HP Linux Printing and Imaging - GUI utilities (Qt-based) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878974 Title: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1878974/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878974] Re: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
It looks several others have been having problems with hplip in 20.04 Answer 690278 is similar. As I already noted Answer 690720 is also similar. I have attempted to purge all references to hplip and re-install the packages included in 20.04 (which install 3.20.3) but that does not seem to change the results shown above. I'm noticing in the logs error reports " Printer Backend /usr/lib/cups/backend/hp does not exist!15 May 2020 10:52:34 AM PDT - " For my specific issue will see if I can obtain these files from another system I have as it looks like many people use the hp installer to repair/replace these missing files (but as noted above the HP installer even version 3.20.5) is not currently passing checks in Ubuntu 20.04 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878974 Title: Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1878974/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878974] [NEW] Unable to use HP USB Printer in Ubuntu 20.04 - apear to be hplip issues
Public bug reported: Hi, I am unable to connect and print with a HP USB Pinter on Ubuntu 20.04, Spent some time troubleshooting with the default (previously current) drivers hplip ver. 3.20.3 , but Ubuntu 20.04 does not seem to be supported officially due to missing dependencies. Errors about missing pyqt4 dependencies among others. When using the hplip ver. 3.20.3 from the Ubuntu Repo printer is found but fails to print. Just noticed similar bug filed, 690720 , and saw note that new hplip ver. 3.20.5 was just released and supports Ubuntu 20.04 When trying to install new package hplip ver. 3.20.5 with the .run script provided by HP I am unable to complete installatoin as it reports unmet dependency of pyqt5 , even though package python3-pyqt5 is installed on system. https://developers.hp.com/hp-linux-imaging-and-printing/gethplip Maybe the repo just needs to be updated with a newer build (3.20.5) to install on my system, or is there something that can be done in the meantime. Below hp-check -t when using the repo hplip ver. 3.20.3 , == Saving output in log file: /root/hp-check.log HP Linux Imaging and Printing System (ver. 3.20.3) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install... --- | SYSTEM INFO | --- Kernel: 5.4.0-29-generic #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 GNU/Linux Host: judith-mini Proc: 5.4.0-29-generic #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 GNU/Linux Distribution: ubuntu 20.04 Bitness: 64 bit --- | HPLIP CONFIGURATION | --- HPLIP-Version: HPLIP 3.20.3 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.3 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and
[Bug 1876957] Re: Symbolic link 'pyvenv' is bloken
I have the same problem on aarch64 20.04. # dpkg --list | grep venv ii python3-venv 3.8.2-0ubuntu2 arm64pyvenv-3 binary for python3 (default python3 version) ii python3.8-venv 3.8.2-1ubuntu1.1 arm64Interactive high-level object-oriented language (pyvenv binary, version 3.8) # file /usr/bin/pyvenv /usr/bin/pyvenv: broken symbolic link to pyvenv-3.8 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876957 Title: Symbolic link 'pyvenv' is bloken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/python3-defaults/+bug/1876957/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1870981] Re: u-boot environment modification does not work raspberry 4 with eoan
I loaded up a new card to do a minicom dump for you and now I cannot reproduce this either. This puzzles me as I tried a bunch of things to try to get this to work and ended up having to build custom u-boot packages. The only thing I can think is I had a bad microsd card. Sorry and thanks for you time. ** Changed in: u-boot (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1870981 Title: u-boot environment modification does not work raspberry 4 with eoan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/u-boot/+bug/1870981/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1870985] [NEW] RFE: Enable autoboot strings by default
Public bug reported: This is a feature request as opposed to a bug. I would be super handy to have the following settings enabled by default in the Raspberry Pi Ubuntu u-boot package. CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_DELAY_STR "delay" CONFIG_AUTOBOOT_STOP_STR "stop" The documentation for these settings is here: https://gitlab.denx.de/u-boot/custodians/u-boot- raspberrypi/-/blob/master/doc/README.autoboot Many of us using Ubuntu on Raspberry Pi are using the serial ports for connecting various devices/hats. As Ubuntu currently ships, any character received on the serial port will halt the boot process. Devices, such as GPS receivers, typically have a regular stream of output that, when attached at boot, cause u-boot to halt. By setting the above settings (or something similar) it will require a specific string to be entered to halt u-boot, instead of any character. Reconfiguring u-boot to not abort on any character is quite hard and poorly documented. ** Affects: u-boot (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1870985 Title: RFE: Enable autoboot strings by default To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/u-boot/+bug/1870985/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1870981] [NEW] u-boot environment modification does not work raspberry 4 with eoan
Public bug reported: Description:Ubuntu 19.10 Release:19.10 Package: u-boot-rpi (2019.07+dfsg-1ubuntu3) On a Raspberry Pi 3 model B, I can interrupt the u-boot process and use the following two commands to disable the boot delay. I do this as I have a GPS device attached to the serial port and the NMEA messages will halt the u-boot boot process. Commands: setenv bootdelay -2 saveenv This saves a u-boot environment file into the /boot filesystem such that this setting persists across power cycles. However, with eoan on a Raspberry Pi 4, this environment file is not written out properly and on subsequent reboots u-boot will say that the file is corrupt. This will cause u-boot to revert to the built in defaults which causes the u-boot process to halt. ** Affects: u-boot (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1870981 Title: u-boot environment modification does not work raspberry 4 with eoan To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/u-boot/+bug/1870981/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1849826] Re: create lb failed due to flavor error
The above error is that the nova compute flavor specified "d49b897b- 1ba9-4334-8788-2fc467052d0a" is not present or accessible in nova. The below "openstack loadbalancer flavor list" is listing the Octavia flavors, not the nova compute flavor that is causing the nova compute build failure. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1849826 Title: create lb failed due to flavor error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/octavia/+bug/1849826/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785171] Re: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection
Disabling TSO does not resolve the issue. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1785171 Title: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1785171/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785171] Re: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection
I am experimenting with disabling tso via ethtool now. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1785171 Title: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1785171/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785171] Re: Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver keeps Dropping Internet Connection
I am seeing this on a Intel Corporation Ethernet Connection I218-V. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=18.04 DISTRIB_CODENAME=bionic DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS" Linux server 4.15.0-54-generic #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux Jun 27 22:16:23 server kernel: [ 95.305441] [ cut here ] Jun 27 22:16:23 server kernel: [ 95.305445] NETDEV WATCHDOG: eno1 (e1000e): transmit queue 0 timed out Jun 27 22:16:23 server kernel: [ 95.305481] WARNING: CPU: 3 PID: 0 at /build/linux-jmOa1Y/linux-4.15.0/net/sched/sch_generic.c:323 dev_watchdog+0x221/0x230 Jun 27 22:16:23 server kernel: [ 95.305482] Modules linked in: dm_crypt algif_skcipher af_alg nls_iso8859_1 ppdev intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass intel_cstate intel_rapl_perf input_leds serio_raw parport_pc snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic parport snd_hda_intel acpi_pad snd_hda_codec snd_hda_core snd_hwdep mei_me mei snd_pcm shpchp lpc_ich mac_hid snd_timer snd soundcore sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc i915 aesni_intel aes_x86_64 crypto_simd Jun 27 22:16:23 server kernel: [ 95.305591] glue_helper mxm_wmi cryptd i2c_algo_bit drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ahci ptp drm libahci pps_core wmi video Jun 27 22:16:23 server kernel: [ 95.305621] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.15.0-54-generic #58-Ubuntu Jun 27 22:16:23 server kernel: [ 95.305623] Hardware name: MSI MS-7817/H97M ECO (MS-7817), BIOS V26.8 02/18/2016 Jun 27 22:16:23 server kernel: [ 95.305629] RIP: 0010:dev_watchdog+0x221/0x230 Jun 27 22:16:23 server kernel: [ 95.305631] RSP: 0018:967b9eb83e58 EFLAGS: 00010286 Jun 27 22:16:23 server kernel: [ 95.305635] RAX: RBX: RCX: 0006 Jun 27 22:16:23 server kernel: [ 95.305638] RDX: 0007 RSI: 0092 RDI: 967b9eb96490 Jun 27 22:16:23 server kernel: [ 95.305641] RBP: 967b9eb83e88 R08: 0001 R09: 044c Jun 27 22:16:23 server kernel: [ 95.305643] R10: daca8f63f580 R11: R12: 0001 Jun 27 22:16:23 server kernel: [ 95.305646] R13: 967b80934000 R14: 967b80934478 R15: 967b81020880 Jun 27 22:16:23 server kernel: [ 95.305650] FS: () GS:967b9eb8() knlGS: Jun 27 22:16:23 server kernel: [ 95.305653] CS: 0010 DS: ES: CR0: 80050033 Jun 27 22:16:23 server kernel: [ 95.305655] CR2: 555b6574ea28 CR3: 00025a40a006 CR4: 001606e0 Jun 27 22:16:23 server kernel: [ 95.305658] Call Trace: Jun 27 22:16:23 server kernel: [ 95.305662] Jun 27 22:16:23 server kernel: [ 95.305671] ? dev_deactivate_queue.constprop.33+0x60/0x60 Jun 27 22:16:23 server kernel: [ 95.305678] call_timer_fn+0x30/0x130 Jun 27 22:16:23 server kernel: [ 95.305683] run_timer_softirq+0x3fb/0x450 Jun 27 22:16:23 server kernel: [ 95.305689] ? ktime_get+0x43/0xa0 Jun 27 22:16:23 server kernel: [ 95.305697] ? lapic_next_deadline+0x26/0x30 Jun 27 22:16:23 server kernel: [ 95.305705] __do_softirq+0xe4/0x2bb Jun 27 22:16:23 server kernel: [ 95.305713] irq_exit+0xb8/0xc0 Jun 27 22:16:23 server kernel: [ 95.305718] smp_apic_timer_interrupt+0x79/0x130 Jun 27 22:16:23 server kernel: [ 95.305723] apic_timer_interrupt+0x84/0x90 Jun 27 22:16:23 server kernel: [ 95.305725] Jun 27 22:16:23 server kernel: [ 95.305735] RIP: 0010:cpuidle_enter_state+0xa7/0x2f0 Jun 27 22:16:23 server kernel: [ 95.305737] RSP: 0018:a32c41933e68 EFLAGS: 0246 ORIG_RAX: ff11 Jun 27 22:16:23 server kernel: [ 95.305742] RAX: 967b9eba2840 RBX: 001630a50a51 RCX: 001f Jun 27 22:16:23 server kernel: [ 95.305744] RDX: 001630a50a51 RSI: fffca1795958 RDI: Jun 27 22:16:23 server kernel: [ 95.305747] RBP: a32c41933ea8 R08: 0ee2 R09: 08f8 Jun 27 22:16:23 server kernel: [ 95.305749] R10: a32c41933e38 R11: 0edf R12: 967b9ebacc00 Jun 27 22:16:23 server kernel: [ 95.305752] R13: 0005 R14: b3d71e38 R15: Jun 27 22:16:23 server kernel: [ 95.305760] ? cpuidle_enter_state+0x97/0x2f0 Jun 27 22:16:23 server kernel: [ 95.305767] cpuidle_enter+0x17/0x20 Jun 27 22:16:23 server kernel: [ 95.305774] call_cpuidle+0x23/0x40 Jun 27 22:16:23 server kernel: [ 95.305780] do_idle+0x18c/0x1f0 Jun 27 22:16:23 server kernel: [ 95.305786] cpu_startup_entry+0x73/0x80 Jun 27 22:16:23 server
[Bug 1743465] [NEW] Bionic should have haproxy 1.8-stable
Public bug reported: The Bionic Beaver (18.04 LTS) release should include the released HAProxy 1.8-stable version instead of 1.7.9 that Artful Aardvark includes. 1.8-stable includes improvements to systemd support, threading, TLS, and reload that would be beneficial to have in the next LTS release. 1.8 will also provided a longer upstream support cycle more consistent with an LTS release. ** Affects: haproxy (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1743465 Title: Bionic should have haproxy 1.8-stable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/haproxy/+bug/1743465/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1495430] Re: delete lbaasv2 can't delete lbaas namespace automatically.
** No longer affects: neutron -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1495430 Title: delete lbaasv2 can't delete lbaas namespace automatically. To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1495430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1703423] Re: zesty qemu packages (2.8) released for xenial-updates
My mis-understanding of the cloud archive goal (latest LTS with a given OpenStack release). I also found what was inserting that apt source on my host (devstack) and will disable it. ** Changed in: qemu (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1703423 Title: zesty qemu packages (2.8) released for xenial-updates To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1703423/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1674156] Re: neutron-lbaasv2-agent: TypeError: argument of type 'LoadBalancer' is not iterable
Marking invalid due to v1 driver. ** Changed in: octavia Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1674156 Title: neutron-lbaasv2-agent: TypeError: argument of type 'LoadBalancer' is not iterable To manage notifications about this bug go to: https://bugs.launchpad.net/octavia/+bug/1674156/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1703423] Re: zesty qemu packages (2.8) released for xenial-updates
So if the package came from http://ubuntu- cloud.archive.canonical.com/ubuntu xenial-updates/ocata/main amd64 Packages It appears that the xenial-updates/ocata/main repository has zesty packages in it where it should only have xenial. Correct? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1703423 Title: zesty qemu packages (2.8) released for xenial-updates To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1703423/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1703423] Re: zesty qemu packages (2.8) released for xenial-updates
Ok, so I do develop against OpenStack, so somehow it looks like I got an ocata repo added. However, I think their might still be an issue as it is still xenial- updates. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1703423 Title: zesty qemu packages (2.8) released for xenial-updates To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1703423/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1703423] Re: zesty qemu packages (2.8) released for xenial-updates
qemu-system-x86: Installed: 1:2.8+dfsg-3ubuntu2.3~cloud0 Candidate: 1:2.8+dfsg-3ubuntu2.3~cloud0 Version table: *** 1:2.8+dfsg-3ubuntu2.3~cloud0 500 500 http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/ocata/main amd64 Packages 100 /var/lib/dpkg/status 1:2.5+dfsg-5ubuntu10.14 500 500 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages 500 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages 1:2.5+dfsg-5ubuntu10 500 500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1703423 Title: zesty qemu packages (2.8) released for xenial-updates To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1703423/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1703423] [NEW] zesty qemu packages (2.8) released for xenial-updates
Public bug reported: Xenial hosts that run apt-get update; apt-get dist-upgrade are getting 2.8 (zesty) versions of the qemu packages. Example: Unpacking qemu-system-x86 (1:2.8+dfsg-3ubuntu2.3~cloud0) over (1:2.5+dfsg-5ubuntu10.14) ... This is causing instances to not boot under qemu as the default hardware type is set to pc-i440fx-zesty in these packages. If you override that setting and boot with pc-i440fx-xenial the instance will start. The odd thing too is the https://packages.ubuntu.com/xenial-updates/qemu page shows Xenial should still be on the 2.5 version series, but if you do an apt-get dist-upgrade you get zesty packages. Description:Ubuntu 16.04.2 LTS Release:16.04 ** Affects: qemu (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1703423 Title: zesty qemu packages (2.8) released for xenial-updates To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1703423/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1577630] Re: ERROR neutron_lbaas.agent.agent_manager - HaproxyNSDriver
Moving from Ubuntu neutron-lbaas package project to Octavia, the new owner for neutron-lbaas. ** Package changed: neutron-lbaas (Ubuntu) => octavia -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1577630 Title: ERROR neutron_lbaas.agent.agent_manager - HaproxyNSDriver To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1577630/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1330152] [NEW] touchegg guestures not recognized in root window
Public bug reported: The summary pretty much says it all. This is a known bug in touchegg 1.1.1 and it is fixed in SVN trunk. This is documented at the following URL: https://code.google.com/p/touchegg/issues/detail?id=177 I've confirmed this myself by doing an svn checkout http://touchegg.googlecode.com/svn/touchegg/ and compiling it. ** Affects: touchegg (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1330152 Title: touchegg guestures not recognized in root window To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/touchegg/+bug/1330152/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1287561] [NEW] v4l2loopback kernel module not loadable
Public bug reported: After installing the v4l2loopback-dkms module, I am not able to load it into the kernel. Attempting to load the module results in the following: $ sudo modprobe -v v4l2loopback insmod /lib/modules/3.11.0-17-generic/updates/dkms/v4l2loopback.ko ERROR: could not insert 'v4l2loopback': Bad address dmesg shows this: [ 2082.115432] WARNING: CPU: 5 PID: 15140 at /build/buildd/linux-3.11.0/fs/sysfs/file.c:500 sysfs_attr_ns+0x99/0xa0() [ 2082.115435] sysfs: kobject (null) without dirent [ 2082.115437] Modules linked in: v4l2loopback(OF+) v4l2_mem2mem videobuf2_core v4l2_common v4l2_int_device videodev parport_pc ppdev bnep rfcomm bluetooth xt_addrtype ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables bridge stp llc aufs vesafb joydev snd_hda_codec_hdmi snd_hda_intel snd_hda_codec mxm_wmi snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer fglrx(POF) kvm_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd edac_core snd soundcore k10temp fam15h_power edac_mce_amd sp5100_tco wmi amd_iommu_v2 i2c_piix4 mac_hid microcode psmouse serio_raw lp parport btrfs zlib_deflate libcrc32c hid_generic hid_microsoft usbhid hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid1 raid0 r8169 mii ahci multipath sata_sil24 libahci linear [ 2082.115524] CPU: 5 PID: 15140 Comm: modprobe Tainted: PF W O 3.11.0-17-generic #31-Ubuntu [ 2082.115527] Hardware name: MSI MS-7693/970A-G46 (MS-7693), BIOS V1.11 10/31/2012 [ 2082.115529] 0009 88025a5c3be8 816e7645 88025a5c3c30 [ 2082.115535] 88025a5c3c20 81061e0d a0bbf080 880402052c18 [ 2082.115541] 0001 880402052c00 88025a5c3c80 [ 2082.115547] Call Trace: [ 2082.115554] [816e7645] dump_stack+0x45/0x56 [ 2082.115560] [81061e0d] warn_slowpath_common+0x7d/0xa0 [ 2082.115566] [81061e7c] warn_slowpath_fmt+0x4c/0x50 [ 2082.115573] [81219249] sysfs_attr_ns+0x99/0xa0 [ 2082.115579] [8121931f] sysfs_remove_file+0x1f/0x50 [ 2082.115585] [81472047] device_remove_file+0x17/0x20 [ 2082.115594] [a0bbc256] free_devices+0x8c/0xed [v4l2loopback] [ 2082.115601] [a0bc35e3] init_module+0x5e3/0x1000 [v4l2loopback] [ 2082.115609] [a0bc3000] ? 0xa0bc2fff [ 2082.115615] [810020fa] do_one_initcall+0xfa/0x1b0 [ 2082.115621] [810548e3] ? set_memory_nx+0x43/0x50 [ 2082.115637] [810cc252] load_module+0x12b2/0x1b80 [ 2082.115644] [810c7fb0] ? store_uevent+0x40/0x40 [ 2082.115656] [810ccbc2] SyS_init_module+0xa2/0xf0 [ 2082.115665] [816f74dd] system_call_fastpath+0x1a/0x1f [ 2082.115670] ---[ end trace 10c141d73c72f3af ]--- While I don't know exactly what is going on, the easy fix seems to be to pull in the current debian sid package (0.8.0-1) which installs and loads cleanly on my ubuntu 13.10 install. While there is nothing in the changelog that stands out to me, clearly something is different as the debian 0.8.0-1 package works while the ubuntu 0.7.0-1 package does not produce a loadable module. https://packages.debian.org/sid/all/v4l2loopback-dkms/download ** Affects: v4l2loopback (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1287561 Title: v4l2loopback kernel module not loadable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/v4l2loopback/+bug/1287561/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1270539] Re: inadyn 1.99.3 non-functional
Sorry it took me so long to get back around to this, but I can confirm that the proposed package is working properly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1270539 Title: inadyn 1.99.3 non-functional To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inadyn/+bug/1270539/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1270539] Re: inadyn 1.99.3 non-functional
Here are the details from my system to show it functioning (log obfuscated to remove identifying information): $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 13.10 Release:13.10 Codename: saucy $ dpkg -l inadyn Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ NameVersion Architecture Description +++-===---=== ii inadyn 1.99.3-1ubuntu0.1amd64 Simple and small DynDNS client written in the C language $ cat /var/log/inadyn/inadyn.log | sed -e 's/[0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+/X.X.X.X/g' -e 's/[^ ]\+\(no-ip\.org\)/.\1/g' | head -58 Wed Feb 12 21:22:32 2014: Inadyn version 1.99.3 -- Dynamic DNS update client. Wed Feb 12 21:22:32 2014: Resolving hostname .no-ip.org = IP# X.X.X.X Wed Feb 12 21:22:32 2014: Checking for IP# change, connecting to ip1.dynupdate.no-ip.com(X.X.X.X) Wed Feb 12 21:22:32 2014: Querying DDNS server for my public IP#: Wed Feb 12 21:22:32 2014: GET / HTTP/1.0 Host: ip1.dynupdate.no-ip.com User-Agent: inadyn/1.99.3 troglo...@gmail.com Wed Feb 12 21:22:32 2014: IP server response: Wed Feb 12 21:22:32 2014: HTTP/1.1 200 OK Server: nginx Date: Thu, 13 Feb 2014 03:21:30 GMT Content-Type: text/html Connection: close X.X.X.X Wed Feb 12 21:22:32 2014: Current public IP# X.X.X.X Wed Feb 12 21:22:32 2014: Update needed for alias .no-ip.org, new IP# X.X.X.X Wed Feb 12 21:22:32 2014: Sending IP# update to DDNS server, connecting to dynupdate.no-ip.com(X.X.X.X) Wed Feb 12 21:22:33 2014: Sending alias table update to DDNS server: Wed Feb 12 21:22:33 2014: GET .no-ip.orgmyip=X.X.X.X HTTP/1.0 Host: dynupdate.no-ip.com Authorization: Basic dGhlcmV2bWo6ckBncEVGVEdINURjTzlCNg== User-Agent: inadyn/1.99.3 troglo...@gmail.com Wed Feb 12 21:22:33 2014: Successful alias table update for .no-ip.org = new IP# X.X.X.X Wed Feb 12 21:22:33 2014: DDNS server response: Wed Feb 12 21:22:33 2014: HTTP/1.1 200 OK Date: Thu, 13 Feb 2014 03:21:30 GMT Server: Apache/2 Content-Location: update.php Vary: negotiate TCN: choice Content-Length: 20 Connection: close Content-Type: text/plain; charset=UTF-8 good X.X.X.X Wed Feb 12 21:27:34 2014: . Wed Feb 12 21:27:34 2014: Checking for IP# change, connecting to ip1.dynupdate.no-ip.com(X.X.X.X) Wed Feb 12 21:27:34 2014: Querying DDNS server for my public IP#: Wed Feb 12 21:27:34 2014: GET / HTTP/1.0 Host: ip1.dynupdate.no-ip.com User-Agent: inadyn/1.99.3 troglo...@gmail.com Wed Feb 12 21:27:34 2014: IP server response: Wed Feb 12 21:27:34 2014: HTTP/1.1 200 OK Server: nginx Date: Thu, 13 Feb 2014 03:26:31 GMT Content-Type: text/html Connection: close X.X.X.X Wed Feb 12 21:27:34 2014: No IP# change detected, still at X.X.X.X Wed Feb 12 21:27:34 2014: Current public IP# X.X.X.X -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1270539 Title: inadyn 1.99.3 non-functional To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inadyn/+bug/1270539/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1270539] Re: inadyn 1.99.3 non-functional
Ok, well, I notice too late that I left the base 64 credentials in the log output. But no worries, it was not a password I used anywhere else and I have changed it. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1270539 Title: inadyn 1.99.3 non-functional To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inadyn/+bug/1270539/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1270539] [NEW] inadyn 1.99.3 non-functional
Public bug reported: The short version is that 1.99.3 (the package available for saucy) is 100% broken. Any chance of updating the package? The long version can be found here: https://github.com/troglobit/inadyn/pull/40 ** Affects: inadyn (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1270539 Title: inadyn 1.99.3 non-functional To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inadyn/+bug/1270539/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1172065] Re: 12.04.2 incorrect file name signed efi amd6.deb
The bug is a misnamed file in the uefi installer for 12.04.2, causing installations to fail. Therefore, a log cannot be collected. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1172065 Title: 12.04.2 incorrect file name signed efi amd6.deb To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1172065/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 647797] Re: simple ccsm crashes on start
*** This bug is a duplicate of bug 359395 *** https://bugs.launchpad.net/bugs/359395 ** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/647797/+attachment/1636718/+files/Dependencies.txt ** Attachment added: ProcMaps.txt https://bugs.launchpad.net/bugs/647797/+attachment/1636719/+files/ProcMaps.txt ** Attachment added: ProcStatus.txt https://bugs.launchpad.net/bugs/647797/+attachment/1636720/+files/ProcStatus.txt ** Attachment added: Traceback.txt https://bugs.launchpad.net/bugs/647797/+attachment/1636721/+files/Traceback.txt ** Visibility changed to: Public -- simple ccsm crashes on start https://bugs.launchpad.net/bugs/647797 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 343714] Re: Kubuntu Jaunty KDE 4.2 very high memory usage
I have also seen this issue. It seems to be Firefox on my machine also. I thought it was just my system, but I recently upgraded to 4GB of RAM and still am using swap with only a few programs running (Konsole, Firefox, KVirc): $ free -m total used free sharedbuffers cached Mem: 3886 3549337 0 90 1872 -/+ buffers/cache: 1586 2300 Swap:11381594 10787 -- Kubuntu Jaunty KDE 4.2 very high memory usage https://bugs.launchpad.net/bugs/343714 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
