[Bug 1990272] Re: PCIe Bus Error: Uncorrected, Transaction Layer, device [8086:51b0], AER UnsupReq
I'm having similar issues - the PCIe device in question seems to be the wireless card in my case. Every now and then my system (Dell Optiplex 3050) will lock up entirely; no app hosting, no SSH, no anything, and only a forced reboot will fix it - for a while, before it locks up again. Syslog has a _slew_ of these errors present before the new- session/reboot takes effect. Coming from Focal, and that machine hardly every had any problems. #[about 40 pages of the same error above] #--- Jun 23 07:04:13 optiplex2 kernel: [403063.425670] pcieport :00:1c.7: AER: Corrected error message received from :00:1c.7 Jun 23 07:04:13 optiplex2 kernel: [403063.425680] pcieport :00:1c.7: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jun 23 07:04:13 optiplex2 kernel: [403063.425682] pcieport :00:1c.7: device [8086:a297] error status/mask=0001/2000 Jun 23 07:04:13 optiplex2 kernel: [403063.425685] pcieport :00:1c.7:[ 0] RxErr #---then force rebooted later in the morning after server had crashed overnight--- Jun 23 19:09:06 optiplex2 systemd-modules-load[438]: Inserted module 'msr' Jun 23 19:09:06 optiplex2 kernel: [0.00] microcode: microcode updated early to revision 0xf8, date = 2023-09-28 Jun 23 19:09:06 optiplex2 kernel: [0.00] Linux version 5.15.0-112-generic (buildd@lcy02-amd64-051) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #122-Ubuntu SMP Thu May 23 07:48:21 UTC 2024 (Ubuntu 5.15.0-112.122-generic 5.15.152) Jun 23 19:09:06 optiplex2 kernel: [0.00] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-112-generic root=UUID=694b220d-e9d0-47d3-9b8b-3e069ee1983c ro Jun 23 19:09:06 optiplex2 kernel: [0.00] KERNEL supported cpus: Linux optiplex2 5.15.0-112-generic #122-Ubuntu SMP Thu May 23 07:48:21 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1990272 Title: PCIe Bus Error: Uncorrected, Transaction Layer, device [8086:51b0],AER UnsupReq To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1990272/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 2069922] [NEW] Black screen on boot
Public bug reported: After upgrading from 23.10 to 24.04, the system boots to black screens most of the time. Recovery mode followed by "resume normal boot" always works. ** Affects: ubuntu Importance: Undecided Status: New ** Attachment added: "Kernal log from 'journalctl -kb -1'" https://bugs.launchpad.net/bugs/2069922/+attachment/5790909/+files/journal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2069922 Title: Black screen on boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/2069922/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1968631] Re: regression in jammy kernel 5.15 for module ath9k
Experiencing the same issue and also seeing the same dump: [ 104.357253] [ 104.357264] UBSAN: invalid-load in /build/linux-9H675w/linux-5.15.0/net/mac80211/status.c:1164:21 [ 104.357270] load of value 255 is not a valid value for type '_Bool' [ 104.357274] CPU: 1 PID: 1583 Comm: dbus-daemon Tainted: G OE 5.15.0-25-generic #25-Ubuntu [ 104.357279] Hardware name: ASUSTeK COMPUTER INC. X553MA/X553MA, BIOS X553MA.211 04/10/2015 [ 104.357281] Call Trace: [ 104.357285] [ 104.357289] show_stack+0x52/0x58 [ 104.357298] dump_stack_lvl+0x4a/0x5f [ 104.357312] dump_stack+0x10/0x12 [ 104.357315] ubsan_epilogue+0x9/0x45 [ 104.357319] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 104.357324] ieee80211_tx_status_ext.cold+0x4e/0x5f [mac80211] [ 104.357420] ieee80211_tx_status+0x72/0xa0 [mac80211] [ 104.357484] ath_txq_unlock_complete+0x12d/0x160 [ath9k] [ 104.357498] ath_tx_edma_tasklet+0xef/0x4c0 [ath9k] [ 104.357510] ? del_timer_sync+0x6c/0xb0 [ 104.357516] ath9k_tasklet+0x14e/0x290 [ath9k] [ 104.357528] tasklet_action_common.constprop.0+0xc0/0xf0 [ 104.357534] tasklet_action+0x22/0x30 [ 104.357538] __do_softirq+0xd9/0x2e3 [ 104.357544] irq_exit_rcu+0x8c/0xb0 [ 104.357548] common_interrupt+0x4a/0xa0 [ 104.357554] ? asm_common_interrupt+0x8/0x40 [ 104.357558] asm_common_interrupt+0x1e/0x40 [ 104.357562] RIP: 0033:0x55a15a659cdd [ 104.357566] Code: c0 75 23 e9 32 fe ff ff 0f 1f 44 00 00 e8 db e6 ff ff 41 89 c0 48 89 e8 45 85 c0 75 2a 48 85 ed 0f 84 14 fe ff ff 4c 8b 60 10 <48> 8b 68 08 49 8b 3c 24 48 3b 6b 18 75 d5 e8 b0 e6 ff ff 85 c0 0f [ 104.357570] RSP: 002b:7fffd4987cf0 EFLAGS: 0202 [ 104.357575] RAX: 7f4bd3f62d20 RBX: 55a15ac19e90 RCX: [ 104.357577] RDX: 00056ee0 RSI: 0068 RDI: 55a15ad6b990 [ 104.357580] RBP: 7f4bd3f62d20 R08: R09: [ 104.357582] R10: 7fffd49b9080 R11: 7fffd49b9090 R12: 55a15ad6cb70 [ 104.357584] R13: R14: R15: 7fffd4987e30 [ 104.357590] [ 104.357592] [ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1968631 Title: regression in jammy kernel 5.15 for module ath9k To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1968631/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1904484] [NEW] iMac with AMD Radeon Mobility GPU Suffers from Pink Screen Artefacts Following Waking from Suspension
Public bug reported: The bug is in the text file uploaded. Thank you so much for your help ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-29-generic 5.8.0-29.31 ProcVersionSignature: Ubuntu 5.8.0-29.31-generic 5.8.14 Uname: Linux 5.8.0-29-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ali 781 F pulseaudio ali 808 F pipewire-media- /dev/snd/seq:ali 780 F pipewire CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Mon Nov 16 20:13:25 2020 InstallationDate: Installed on 2020-11-16 (0 days ago) InstallationMedia: Kubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) MachineType: Apple Inc. iMac8,1 ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-29-generic root=UUID=a5cc462d-49e8-4b4a-92af-d249eefa326a ro noapic noacpi nosplash irqpoll RelatedPackageVersions: linux-restricted-modules-5.8.0-29-generic N/A linux-backports-modules-5.8.0-29-generic N/A linux-firmware1.190 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/09/08 dmi.bios.release: 0.1 dmi.bios.vendor: Apple Inc. dmi.bios.version: IM81.88Z.00C1.B00.0802091538 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Mac-F226BEC8 dmi.board.vendor: Apple Inc. dmi.board.version: PVT dmi.chassis.asset.tag: Asset Tag# dmi.chassis.type: 13 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F226BEC8 dmi.modalias: dmi:bvnAppleInc.:bvrIM81.88Z.00C1.B00.0802091538:bd02/09/08:br0.1:svnAppleInc.:pniMac8,1:pvr1.0:rvnAppleInc.:rnMac-F226BEC8:rvrPVT:cvnAppleInc.:ct13:cvrMac-F226BEC8: dmi.product.family: Mac dmi.product.name: iMac8,1 dmi.product.sku: System SKU# dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug groovy ** Attachment added: "Launchpad.txt" https://bugs.launchpad.net/bugs/1904484/+attachment/5434936/+files/Launchpad.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1904484 Title: iMac with AMD Radeon Mobility GPU Suffers from Pink Screen Artefacts Following Waking from Suspension To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1904484/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1769941] Re: grep fails to match an empty line using perl regexp if it's the last line in a file
I can't identify when it was fixed, but can confirm this is not happening any more in grep 3.1-2build1 in Ubuntu 18.04. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1769941 Title: grep fails to match an empty line using perl regexp if it's the last line in a file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grep/+bug/1769941/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1832884] [NEW] libsparsehash-dev homepage link broken
Public bug reported: "apt show libsparsehash-dev" shows "Homepage: http://code.google.com/p /google-sparsehash". Going to this URL gives a redirect page to https://code.google.com/archive/sparsehash, which doesn't exist. Going to http://code.google.com/p/sparsehash instead redirects to https://github.com/sparsehash/sparsehash; this might be the correct homepage to list? 1) The release of Ubuntu you are using, via 'lsb_release -rd' or System -> About Ubuntu $ lsb_release -rd Description:Ubuntu 16.04.6 LTS Release:16.04 2) The version of the package you are using, via 'apt-cache policy pkgname' or by checking in Software Center $ apt-cache policy libsparsehash-dev libsparsehash-dev: Installed: 2.0.2-1 Candidate: 2.0.2-1 Version table: *** 2.0.2-1 500 500 http://azure.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages 100 /var/lib/dpkg/status 3) What you expected to happen I expected to be able to go to sparsehash's homepage via the URL listed in the "Homepage:" field. 4) What happened instead I got a redirect page with a broken link. ** Affects: sparsehash (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1832884 Title: libsparsehash-dev homepage link broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sparsehash/+bug/1832884/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1113597] Re: --rsyncable option not documented in man page
Thanks for reporting this. This was fixed back in gzip version 1.6-1, and the oldest version of gzip in a supported version of Ubuntu is 1.6-3ubuntu1. Closing! ** Bug watch added: Debian Bug tracker #688305 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688305 ** Also affects: gzip (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688305 Importance: Unknown Status: Unknown ** Changed in: gzip (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1113597 Title: --rsyncable option not documented in man page To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gzip/+bug/1113597/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1168049] Re: gunzip ignores 'n' when asked to overwrite file
Fixed in gzip 1.6-1. Oldest version in a supported version of Ubuntu is 1.6-3ubuntu1 (in Trusty). ** Changed in: gzip (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1168049 Title: gunzip ignores 'n' when asked to overwrite file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gzip/+bug/1168049/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1168049] Re: gunzip ignores 'n' when asked to overwrite file
** Bug watch added: Debian Bug tracker #704689 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=704689 ** Also affects: gzip (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=704689 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1168049 Title: gunzip ignores 'n' when asked to overwrite file To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gzip/+bug/1168049/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1784595] Re: takes forever to boot
Fixed it. The problem as it turned out was that after resizing, moving and merging partitions the boot process could not find the Swap drive. I modified fstab and all is well now 😊. Thank you. On Wed., 1 Aug. 2018, 11:40 am Daniel van Vugt, < daniel.van.v...@canonical.com> wrote: > ** Package changed: xorg (Ubuntu) => ubuntu > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1784595 > > Title: > takes forever to boot > > Status in Ubuntu: > New > > Bug description: > I apologise I really have no idea, this report was generated > automatically. > I resized some partitions and merged some partitions. > I then went through a "Grub Rescue>" to get up and running again. > the system now takes about 3 minutes to get to the login screen. > I updated and installed grub as well. > > ProblemType: Bug > DistroRelease: Ubuntu 16.04 > Package: xorg 1:7.7+13ubuntu3 > ProcVersionSignature: Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13 > Uname: Linux 4.13.0-32-generic x86_64 > .tmp.unity_support_test.0: > > ApportVersion: 2.20.1-0ubuntu2.18 > Architecture: amd64 > CompizPlugins: No value set for > `/apps/compiz-1/general/screen0/options/active_plugins' > CompositorRunning: None > Date: Tue Jul 31 19:34:12 2018 > DistUpgraded: Fresh install > DistroCodename: xenial > DistroVariant: ubuntu > ExtraDebuggingInterest: Yes, if not too technical > GraphicsCard: >Intel Corporation 3rd Gen Core processor Graphics Controller > [8086:0166] (rev 09) (prog-if 00 [VGA controller]) > Subsystem: Toshiba America Info Systems 3rd Gen Core processor > Graphics Controller [1179:fb01] >NVIDIA Corporation GF108M [GeForce GT 630M] [10de:0de9] (rev a1) > (prog-if 00 [VGA controller]) > Subsystem: Toshiba America Info Systems GF108M [GeForce GT 630M] > [1179:fb01] > InstallationDate: Installed on 2018-07-13 (17 days ago) > InstallationMedia: Robolinux_9.3 16.04 - Release amd64 > MachineType: TOSHIBA Satellite P850 > ProcEnviron: >LANGUAGE=en_US >PATH=(custom, no user) >LANG=en_US.UTF-8 >SHELL=/bin/bash > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic > root=UUID=fd6d67e8-fc11-4624-b9a6-3cd136a622e4 ro quiet splash > SourcePackage: xorg > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 02/20/2013 > dmi.bios.vendor: TOSHIBA > dmi.bios.version: 6.70 > dmi.board.asset.tag: * > dmi.board.name: QFKAA > dmi.board.vendor: TOSHIBA > dmi.board.version: 1.00 > dmi.chassis.asset.tag: * > dmi.chassis.type: 10 > dmi.chassis.vendor: TOSHIBA > dmi.chassis.version: * > dmi.modalias: > dmi:bvnTOSHIBA:bvr6.70:bd02/20/2013:svnTOSHIBA:pnSatelliteP850:pvrPSPKFA-049001:rvnTOSHIBA:rnQFKAA:rvr1.00:cvnTOSHIBA:ct10:cvr*: > dmi.product.family: * > dmi.product.name: Satellite P850 > dmi.product.version: PSPKFA-049001 > dmi.sys.vendor: TOSHIBA > version.compiz: compiz 1:0.9.12.3+16.04.20180221-0ubuntu1 > version.ia32-libs: ia32-libs N/A > version.libdrm2: libdrm2 2.4.91-2~16.04.1 > version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.5-0ubuntu0~16.04.1 > version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A > version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.5-0ubuntu0~16.04.1 > version.xserver-xorg-core: xserver-xorg-core N/A > version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A > version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A > version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A > version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A > xserver.bootTime: Wed Aug 1 05:03:53 2018 > xserver.configfile: default > xserver.errors: >Failed to load module "nvidia" (module does not exist, 0) >Failed to load module "nvidia" (module does not exist, 0) >NOUVEAU(G0): [XvMC] Failed to initialize extension. > xserver.logfile: /var/log/Xorg.0.log > xserver.version: 2:1.19.6-1ubuntu4~16.04.1 > xserver.video_driver: modeset > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+bug/1784595/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1784595 Title: takes forever to boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1784595/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1784595] [NEW] takes forever to boot
Public bug reported: I apologise I really have no idea, this report was generated automatically. I resized some partitions and merged some partitions. I then went through a "Grub Rescue>" to get up and running again. the system now takes about 3 minutes to get to the login screen. I updated and installed grub as well. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: xorg 1:7.7+13ubuntu3 ProcVersionSignature: Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13 Uname: Linux 4.13.0-32-generic x86_64 .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Tue Jul 31 19:34:12 2018 DistUpgraded: Fresh install DistroCodename: xenial DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems 3rd Gen Core processor Graphics Controller [1179:fb01] NVIDIA Corporation GF108M [GeForce GT 630M] [10de:0de9] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems GF108M [GeForce GT 630M] [1179:fb01] InstallationDate: Installed on 2018-07-13 (17 days ago) InstallationMedia: Robolinux_9.3 16.04 - Release amd64 MachineType: TOSHIBA Satellite P850 ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-32-generic root=UUID=fd6d67e8-fc11-4624-b9a6-3cd136a622e4 ro quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/20/2013 dmi.bios.vendor: TOSHIBA dmi.bios.version: 6.70 dmi.board.asset.tag: * dmi.board.name: QFKAA dmi.board.vendor: TOSHIBA dmi.board.version: 1.00 dmi.chassis.asset.tag: * dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: * dmi.modalias: dmi:bvnTOSHIBA:bvr6.70:bd02/20/2013:svnTOSHIBA:pnSatelliteP850:pvrPSPKFA-049001:rvnTOSHIBA:rnQFKAA:rvr1.00:cvnTOSHIBA:ct10:cvr*: dmi.product.family: * dmi.product.name: Satellite P850 dmi.product.version: PSPKFA-049001 dmi.sys.vendor: TOSHIBA version.compiz: compiz 1:0.9.12.3+16.04.20180221-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.91-2~16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.5-0ubuntu0~16.04.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.5-0ubuntu0~16.04.1 version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Wed Aug 1 05:03:53 2018 xserver.configfile: default xserver.errors: Failed to load module "nvidia" (module does not exist, 0) Failed to load module "nvidia" (module does not exist, 0) NOUVEAU(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.19.6-1ubuntu4~16.04.1 xserver.video_driver: modeset ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1784595 Title: takes forever to boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1784595/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1743710] Re: Ubuntu 16.04: since 2018 all dropdown menus black and unreadable
Changing this works for me:
In /usr/share/themes/Ambiance/gtk-2.0/gtkrc line 346
Change:
style "menu" = "dark" {
To:
style "menu" = "white" {
And run gtk-theme-switch2 to apply the style change.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743710
Title:
Ubuntu 16.04: since 2018 all dropdown menus black and unreadable
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-themes/+bug/1743710/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1743710] Re: Ubuntu 16.04: since 2018 all dropdown menus black and unreadable
Here's gimp showing the issue - bottom left. ** Attachment added: "Screenshot from 2018-01-29 14-20-10.png" https://bugs.launchpad.net/ubuntu/+source/ubuntu-themes/+bug/1743710/+attachment/5044775/+files/Screenshot%20from%202018-01-29%2014-20-10.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1743710 Title: Ubuntu 16.04: since 2018 all dropdown menus black and unreadable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-themes/+bug/1743710/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 91175] Re: cut gets confused with UTF-8 characters
*** This bug is a duplicate of bug 875713 *** https://bugs.launchpad.net/bugs/875713 ** This bug has been marked a duplicate of bug 875713 cut fails to handle correctly utf-8 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/91175 Title: cut gets confused with UTF-8 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/91175/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1414316] Re: cut() does not handle unicode properly
*** This bug is a duplicate of bug 875713 *** https://bugs.launchpad.net/bugs/875713 ** This bug has been marked a duplicate of bug 875713 cut fails to handle correctly utf-8 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1414316 Title: cut() does not handle unicode properly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1414316/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1664321] [NEW] clang + boost regex + xenial = linker error
Public bug reported:
I get a linker error compiling the following with clang++-3.8
optimization level -O1:
#include
int main() {
boost::regex re;
std::string str;
boost::smatch match;
boost::regex_match(str, match, re);
return 0;
}
It works fine with gcc:
$ g++ -O1 -o boost-clang-bug.gcc boost-clang-bug.cpp -lboost_regex
Or with clang -O0:
$ clang++-3.8 -O0 -o boost-clang-bug.o0 boost-clang-bug.cpp
-lboost_regex
But not with clang -O1:
$ clang++-3.8 -O1 -o boost-clang-bug.o1 boost-clang-bug.cpp -lboost_regex
/tmp/boost-clang-bug-64dd61.o: In function
`boost::cpp_regex_traits::transform[abi:cxx11](char const*, char const*)
const':
boost-clang-bug.cpp:(.text._ZNK5boost16cpp_regex_traitsIcE9transformB5cxx11EPKcS3_[_ZNK5boost16cpp_regex_traitsIcE9transformB5cxx11EPKcS3_]+0x23):
undefined reference to
`boost::re_detail::cpp_regex_traits_implementation::transform[abi:cxx11](char
const*, char const*) const'
/tmp/boost-clang-bug-64dd61.o: In function
`boost::cpp_regex_traits::transform_primary[abi:cxx11](char const*, char
const*) const':
boost-clang-bug.cpp:(.text._ZNK5boost16cpp_regex_traitsIcE17transform_primaryB5cxx11EPKcS3_[_ZNK5boost16cpp_regex_traitsIcE17transform_primaryB5cxx11EPKcS3_]+0x23):
undefined reference to
`boost::re_detail::cpp_regex_traits_implementation::transform_primary[abi:cxx11](char
const*, char const*) const'
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Instead of giving an error, I would expect clang to successfully compile
and link this program.
I'm using a stock install of xenial (on AWS, ubuntu/images/hvm-ssd
/ubuntu-xenial-16.04-amd64-server-20170113 (ami-7c803d1c)) updating and
installing these:
$ sudo apt-get update
$ sudo apt-get install clang-3.8 libboost-regex1.58 g++
Here's relevant versioning information:
$ lsb_release -rd
Description:Ubuntu 16.04.1 LTS
Release:16.04
$ apt-cache policy clang-3.8
clang-3.8:
Installed: 1:3.8-2ubuntu4
Candidate: 1:3.8-2ubuntu4
Version table:
*** 1:3.8-2ubuntu4 500
500 http://us-west-2.ec2.archive.ubuntu.com/ubuntu
xenial-updates/universe amd64 Packages
100 /var/lib/dpkg/status
1:3.8-2ubuntu1 500
500 http://us-west-2.ec2.archive.ubuntu.com/ubuntu xenial/universe
amd64 Packages
** Affects: llvm-toolchain-3.8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1664321
Title:
clang + boost regex + xenial = linker error
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/llvm-toolchain-3.8/+bug/1664321/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1600452] Re: "Failed to set variable: (2) Invalid Parameter" when enrolling MOK
This problem still exists in my apt-get-upgrad'ed copy of yakkety and plagues me on my Lenovo E560 with up-to-date (from Lenovo's point of view) firmware. Is there a step-by-step for the workaround (patching, building and replacing MokManager.efi's)? It seems to me that even when the fixed MokManager gets into the repos, people will still need to go back and update any UEFIs they've deployed, to be able to turn Secure Boot back on, right? Thanks, -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1600452 Title: "Failed to set variable: (2) Invalid Parameter" when enrolling MOK To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mokutil/+bug/1600452/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1598030] [NEW] Firefox will not sync
Public bug reported: I think a localhost name problem I will download & reinstall ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: firefox 47.0+build3-0ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ray1493 F pulseaudio BuildID: 20160606113944 Channel: Unavailable CurrentDesktop: Unity Date: Fri Jul 1 15:08:55 2016 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2016-06-30 (1 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.1.1 dev enx0c5b8f279a64 proto static metric 100 default via 192.168.1.1 dev wlp2s0 proto static metric 600 169.254.0.0/16 dev enx0c5b8f279a64 scope link metric 1000 192.168.1.0/24 dev enx0c5b8f279a64 proto kernel scope link src 192.168.1.100 metric 100 192.168.1.0/24 dev wlp2s0 proto kernel scope link src 192.168.1.101 metric 600 Locales: extensions.sqlite corrupt or missing Plugins: Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so PrefSources: prefs.js [Profile]/extensions/supp...@lastpass.com/defaults/preferences/defaults.js ProcEnviron: LANGUAGE=en_AU:en PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_AU.UTF-8 SHELL=/bin/bash Profiles: Profile0 (Default) - LastVersion=47.0/20160606113944 (In use) RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/25/2015 dmi.bios.vendor: Insyde dmi.bios.version: F.1E dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 80C5 dmi.board.vendor: HP dmi.board.version: 97.45 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.1E:bd12/25/2015:svnHP:pnHP250G4NotebookPC:pvrType1ProductConfigId:rvnHP:rn80C5:rvr97.45:cvnHP:ct10:cvrChassisVersion: dmi.product.name: HP 250 G4 Notebook PC dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1598030 Title: Firefox will not sync To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1598030/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 289535] Re: date returns the wrong day (DST problem?)
This bug was fixed many years ago, although it seems it wasn't backported to Dapper. Closing as Fix Released. ** Changed in: coreutils (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/289535 Title: date returns the wrong day (DST problem?) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/289535/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 997093] Re: stat does not display ext4 crtime
** Bug watch added: Debian Bug tracker #793831 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=793831 ** Also affects: coreutils (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=793831 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/997093 Title: stat does not display ext4 crtime To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/997093/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1179487] Re: wrong output of command /usr/bin/seq
Upstream bug (marked "Done") shows this is a bug in coreutils 8.20: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13227 Since the affected version of coreutils is no longer in a supported release of Ubuntu, I'm marking this bug as Fix Released. Thanks! ** Changed in: coreutils (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1179487 Title: wrong output of command /usr/bin/seq To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1179487/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1169580] Re: "tail -f file" with "mv file file2" does not show changes to file2
Upstream bug (marked "Done") is at http://debbugs.gnu.org/cgi/bugreport.cgi?bug=19760 ** Changed in: coreutils (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1169580 Title: "tail -f file" with "mv file file2" does not show changes to file2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1169580/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1313784] Re: File descriptors leaked on lvs invocation
Has there been progress on this? I was repairing my LVM and installing postfix when this occurred. Below is the CLI from the time I started the install with apt-get to final postfix updatings. Also, just prior to this I had reduced my swap lvm size to 8MB. I've included that process as well, at the bottom; below ***, just in case. root@Jupiter:~# apt-get install lvm2 dmsetup mdadm reiserfsprogs xfsprogs Reading package lists... Done Building dependency tree Reading state information... Done dmsetup is already the newest version. lvm2 is already the newest version. reiserfsprogs is already the newest version. xfsprogs is already the newest version. The following package was automatically installed and is no longer required: python-roman Use 'apt-get autoremove' to remove it. The following extra packages will be installed: postfix Suggested packages: procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin dovecot-common postfix-cdb postfix-doc Recommended packages: default-mta mail-transport-agent The following NEW packages will be installed: mdadm postfix 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 1,500 kB of archives. After this operation, 4,936 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://us.archive.ubuntu.com/ubuntu/ utopic/main mdadm amd64 3.3-2ubuntu1 [394 kB] Get:2 http://us.archive.ubuntu.com/ubuntu/ utopic-updates/main postfix amd64 2.11.1-1ubuntu1 [1,107 kB] Fetched 1,500 kB in 5min 17s (4,726 B/s) Preconfiguring packages ... Selecting previously unselected package mdadm. (Reading database ... 369614 files and directories currently installed.) Preparing to unpack .../mdadm_3.3-2ubuntu1_amd64.deb ... Unpacking mdadm (3.3-2ubuntu1) ... Selecting previously unselected package postfix. Preparing to unpack .../postfix_2.11.1-1ubuntu1_amd64.deb ... Unpacking postfix (2.11.1-1ubuntu1) ... Processing triggers for man-db (2.7.0.2-2) ... Processing triggers for doc-base (0.10.6) ... Processing 4 added doc-base files... Registering documents with scrollkeeper... Processing triggers for ureadahead (0.100.0-16) ... ureadahead will be reprofiled on next reboot Processing triggers for ufw (0.34~rc-0ubuntu4) ... Setting up mdadm (3.3-2ubuntu1) ... Generating mdadm.conf... done. update-initramfs: deferring update (trigger activated) Generating grub configuration file ... File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11460: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11460: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11460: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11460: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11470: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11470: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11470: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11470: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11480: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11480: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11480: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11480: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11490: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11490: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11490: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11490: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11542: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11542: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11542: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11542: /usr/sbin/grub-probe Found linux image: /boot/vmlinuz-3.16.0-31-generic Found initrd image: /boot/initrd.img-3.16.0-31-generic File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11756: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11756: /usr/sbin/grub-probe File descriptor 3 (pipe:[1702559]) leaked on vgs invocation. Parent PID 11756: /usr/sbin/grub-probe File descriptor 185 (/dev/pts/8) leaked on vgs invocation. Parent PID 11756: /usr/
[Bug 1303271] Re: Spacebar and top-row 4 not working since upgrade to trusty
I deleted the bulk of my profile (.gconf, much of .config, etc) and the problem has gone away. Something was probably broken during the upgrade with keyboard shortcuts, possibly in Unity itself. Regardless, I'll probably never be able to reproduce this so I'm closing the bug. ** Changed in: xorg (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1303271 Title: Spacebar and top-row 4 not working since upgrade to trusty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1303271/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069206] Re: Shotwell search results are slow
Is this fast enough now to be considered fixed? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069206 Title: Shotwell search results are slow To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1069206/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1332729] Re: Broken symlink: /etc/apache2/conf-available/drupal7.conf
** Bug watch added: Debian Bug tracker #738918 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=738918 ** Also affects: drupal7 (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=738918 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1332729 Title: Broken symlink: /etc/apache2/conf-available/drupal7.conf To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/drupal7/+bug/1332729/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1332729] [NEW] Broken symlink: /etc/apache2/conf-available/drupal7.conf
Public bug reported: In Ubuntu Trusty, drupal7 (7.26-1) has a broken symlink: dpkg-deb -c drupal7_7.26-1_all.deb | grep drupal7.conf lrwxrwxrwx root/root 0 2014-01-16 11:14 ./etc/apache2/conf-available/drupal7.conf -> ../../drupal/7/apache.conf The target should be ../../drupal/7/apache2.conf (note the missing digit 2). Thanks! ** Affects: drupal7 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1332729 Title: Broken symlink: /etc/apache2/conf-available/drupal7.conf To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/drupal7/+bug/1332729/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1318302] Re: ndiswrapper-dkms 1.57-1ubuntu1: ndiswrapper kernel module failed to build
*** This bug is a duplicate of bug 1090196 *** https://bugs.launchpad.net/bugs/1090196 The workaround described in 1090196 worked so i have re-installed ndiswrapper now and no error. Thanks very much. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1318302 Title: ndiswrapper-dkms 1.57-1ubuntu1: ndiswrapper kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ndiswrapper/+bug/1318302/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1318302] [NEW] ndiswrapper-dkms 1.57-1ubuntu1: ndiswrapper kernel module failed to build
Public bug reported: Trying to get a netgear n600 wifi adapter (wnda3100-200PES) to work with Ubuntu 12.04 LTS. Ask Ubuntu said install ndiswrapper but failed to install. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: ndiswrapper-dkms 1.57-1ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-20.34~precise1-generic 3.11.10.6 Uname: Linux 3.11.0-20-generic i686 NonfreeKernelModules: fglrx ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 DKMSKernelVersion: 3.11.0-20-generic Date: Sun May 11 10:07:49 2014 InstallationMedia: Ubuntu 12.04.4 LTS "Precise Pangolin" - Release i386 (20140204) MarkForUpload: True PackageArchitecture: all PackageVersion: 1.57-1ubuntu1 SourcePackage: ndiswrapper Title: ndiswrapper-dkms 1.57-1ubuntu1: ndiswrapper kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ndiswrapper (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1318302 Title: ndiswrapper-dkms 1.57-1ubuntu1: ndiswrapper kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ndiswrapper/+bug/1318302/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1303271] [NEW] Spacebar and top-row 4 not working since upgrade to trusty
Public bug reported: Since upgrading to 14.04 Trusty the space-bar and top-row 4 don't work normally in the GUI, but they do work in the text console. Shift-space works, and shift-4 produces a $, etc. The 4 on the number-pad works fine. I have tried adding and removing keyboard layouts but it doesn't help. Other computers I have upgraded don't have this problem. I've tested this with both a wireless USB keyboard and a wired PS2 keyboard; there's no difference. Beyond the xev information below, I'm not sure how else to debug this. Here's the xev output from pressing space. There's a KeyRelease event, but no KeyPress: FocusOut event, serial 34, synthetic NO, window 0x421, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 34, synthetic NO, window 0x421, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 34, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 34, synthetic NO, window 0x421, root 0x26e, subw 0x422, time 3730468, (40,48), root:(105,100), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False This is the output of shift-space: KeyPress event, serial 37, synthetic NO, window 0x421, root 0x26e, subw 0x422, time 3733673, (40,48), root:(105,100), state 0x10, keycode 50 (keysym 0xffe1, Shift_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 37, synthetic NO, window 0x421, root 0x26e, subw 0x422, time 3733739, (40,48), root:(105,100), state 0x11, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x421, root 0x26e, subw 0x422, time 3733781, (40,48), root:(105,100), state 0x11, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x421, root 0x26e, subw 0x422, time 3733903, (40,48), root:(105,100), state 0x11, keycode 50 (keysym 0xffe1, Shift_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Finally, here's the output of pressing the top-row 3, which works normally: KeyPress event, serial 37, synthetic NO, window 0x401, root 0x26e, subw 0x402, time 877, (52,51), root:(117,103), state 0x10, keycode 12 (keysym 0x33, 3), same_screen YES, XLookupString gives 1 bytes: (33) "3" XmbLookupString gives 1 bytes: (33) "3" XFilterEvent returns: False KeyRelease event, serial 37, synthetic NO, window 0x401, root 0x26e, subw 0x402, time 927, (52,51), root:(117,103), state 0x10, keycode 12 (keysym 0x33, 3), same_screen YES, XLookupString gives 1 bytes: (33) "3" XFilterEvent returns: False Thanks! ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu1 Architecture: amd64 CompizPlugins: [core,bailer,detection,composite,opengl,decor,mousepoll,vpswitch,regex,animation,snap,expo,move,compiztoolbox,place,grid,imgpng,gnomecompat,wall,ezoom,workarounds,staticswitcher,resize,fade,unitymtgrabhandles,scale,session,unityshell] CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sun Apr 6 09:48:08 2014 DistUpgraded: 2014-04-03 14:39:29,805 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300] [1002:5b60] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited / Sapphire Technology Radeon X300 (PCIE) [174b:0500] Subsystem: PC Partner Limited / Sapphire Technology Radeon X300 SE [174b:0501] Lsusb: Bus 001 Device 003: ID 07cc:0501 Carry Computer Eng., Co., Ltd Mass Storage Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 005: ID 04fc:05d8 Sunplus Technology Co., Ltd Wireless keyboard/mouse Bus 002 Device 003: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Shuttle Inc SN25V10 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-23-generic root=UUID=a449345f-5c5b-435c-bd6c-580310c141fb ro quiet splash nomdmonddf nomdmonisw nomdmonddf nomdmonisw vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to trusty on 2014-04-03 (2 days ago) dmi.bios.date: 02/09/2006
[Bug 987924] Re: pbzip2 turns read-only empty file to rewritable one
*** This bug is a duplicate of bug 1011021 *** https://bugs.launchpad.net/bugs/1011021 This is effectively the same as bug #1011021 which was fixed in version 1.1.8 (available since quantal). I've tested the scenario in this bug and it works fine now. ** This bug has been marked a duplicate of bug 1011021 pbzip2 fails to preserve ownership on 0 length files -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/987924 Title: pbzip2 turns read-only empty file to rewritable one To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pbzip2/+bug/987924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1245956] Re: Suspend overrides Shutdown
This also affects me, although in my Power settings I've set "When the lid is closed" to "Do nothing". Under normal circumstances this setting works, so I don't think this is a problem in gnome-power-settings. Instead, I think pm-utils doesn't realise a shutdown is under way (after unity/gnome has exited). I'm thinking it's either a bug in pm-utils, or the shutdown script. I've no idea who owns the shutdown script, so I'm adding pm-utils as the package in the hope somebody who knows better can figure it out and reassign if necessary. Thanks! ** Package changed: ubuntu => pm-utils (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1245956 Title: Suspend overrides Shutdown To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pm-utils/+bug/1245956/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 875543] Re: [Dell Inspiron 2500] Can't eject cd rom : Inappropriate ioctl for device
https://bugs.archlinux.org/task/25405 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/875543 Title: [Dell Inspiron 2500] Can't eject cd rom : Inappropriate ioctl for device To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udev/+bug/875543/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 875543] Re: [Dell Inspiron 2500] Can't eject cd rom : Inappropriate ioctl for device
Archlinux appear to have fixed a similar fault 2 years ago, most of the work was taken from Fedora but they had to further patch it themselves. (Apologies I'm not a programmer so I can only give pointers not fixes.) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/875543 Title: [Dell Inspiron 2500] Can't eject cd rom : Inappropriate ioctl for device To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udev/+bug/875543/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 875543] Re: [Dell Inspiron 2500] Can't eject cd rom : Inappropriate ioctl for device
Lindsey, I have an Uberstudent installation (modified Xubuntu raring) the same fault has occurred for me after ripping some dvds. # sudo eject -i off as first given above by Marco Scannadenari works for me. Then both pressing the manual eject button or typing eject work. It is at least a fast work-around. Quite why it is happening I don't know. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/875543 Title: [Dell Inspiron 2500] Can't eject cd rom : Inappropriate ioctl for device To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udev/+bug/875543/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1237382] [NEW] plymouth-label depends on ttf-dejavu-core, should now be fonts-dejavu-core
Public bug reported: On Ubuntu 13.10 (saucy), ttf-dejavu-core is now a transitional package that depends on fonts-dejavu-core. The dependency on plymouth-label should be updated. ** Affects: plymouth (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1237382 Title: plymouth-label depends on ttf-dejavu-core, should now be fonts-dejavu- core To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1237382/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1190067] Re: Shotwell tags don't fit in preview, especially with hierarchical tagging
** Branch linked: lp:~andrewmccarthy/unity-lens-photos/less-tags-in- preview-raring -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1190067 Title: Shotwell tags don't fit in preview, especially with hierarchical tagging To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1190067/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1190067] Re: Shotwell tags don't fit in preview, especially with hierarchical tagging
Just realised my proposal-to-merge for raring would have pulled the entire latest version of the lens. Will make a new branch and to it again. Sorry! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1190067 Title: Shotwell tags don't fit in preview, especially with hierarchical tagging To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1190067/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1070204] Re: Mime info files include "-no-oosplash" option which no longer exists
I was also using Mutt when reporting this bug and this fixed it. Can you check /etc/mailcap to see if it has -no-oosplash in it, and also if you have a .mailcap file in your home directory? The full list for mutt is apparently: $HOME/.mailcap $PKGDATADIR/mailcap $SYSCONFDIR/mailcap /etc/mailcap /usr/etc/mailcap /usr/local/etc/mailcap although I think the second and third aren't relevant for Debian-packaged mutt. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1070204 Title: Mime info files include "-no-oosplash" option which no longer exists To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1070204/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1072191] [NEW] Preview ignores EXIF Orientation tag for jpegs
Public bug reported: Ubuntu 12.10 (quantal), Unity 6.8.0-0ubuntu2 Many (most?) cameras detect when a photo was taken while the camera was rotated, and store this in the JPEG EXIF Orientation tag. The preview view does not check the Orientation tag so many photographs, typically those in portrait format, are not rotated correctly. ** Affects: unity (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1072191 Title: Preview ignores EXIF Orientation tag for jpegs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1072191/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 316959] Re: Music folder appears twice in Rhythmbox
Removing the code as in comment #9 removes the "Music" entry from the upper section. I can't determine where the list in the lower section is generated, although the documentation (http://developer.gnome.org/gtk/2.24/GtkFileChooser.html#GtkFileChooser.description) suggests it can come from "various sources". Perhaps somebody who understands Gnome better can find it. Unless we can determine at runtime that there is a duplicate entry, it may happen that bluntly removing the code actually removes the only copy of that entry. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/316959 Title: Music folder appears twice in Rhythmbox To manage notifications about this bug go to: https://bugs.launchpad.net/gtk/+bug/316959/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1038738] Re: Rhythmbox does not show the Library Location
In dconf-editor I can see it's monitoring my local "Music" folder as well as ".ubuntuone/Purchased from Ubuntu One", so I'm guessing option 1 isn't going to work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1038738 Title: Rhythmbox does not show the Library Location To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1038738/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1070701] Re: Volume slider set to minimum each time Rhythmbox starts, no matter what it was at before closing
I think this is a case of misleading UI layout. The horizontal slider in the top-right corner isn't a volume control but a position-in-track control. Start something playing and you can use it to jump around the track. If instead you click on the speaker icon at the right-hand end you get a vertical volume control that seems to work normally. Am I understanding this right? If so, it's really a design issue. Perhaps the horizontal slider should be inactive or invisible unless something is playing. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1070701 Title: Volume slider set to minimum each time Rhythmbox starts, no matter what it was at before closing To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1070701/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069644] Re: Unity help screen does not list Super+C for Photo lens
This patch should do the trick. ** Patch added: "Adds the shortcut hint for the Dash Photo Lens." https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1069644/+attachment/3410088/+files/photo_lens_shortcut_hint.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069644 Title: Unity help screen does not list Super+C for Photo lens To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1069644/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1070204] [NEW] Mime info files include "-no-oosplash" option which no longer exists
Public bug reported:
Ubuntu 12.10 (quantal), libreoffice 1:3.6.2~rc2-0ubuntu3
In /usr/lib/mime/packages/libreoffice-{calc,draw,impress,math,writer}
there are entries describing the various mime types LibreOffice can
handle and how. (These are used to generate /etc/mailcap). In each of
those files the command-line option "-no-oosplash" is included, which no
longer seems to exist:
$ libreoffice -no-oosplash
Unknown option -no-oosplash
LibreOffice doesn't ignore this and will fail to start.
Replacing "-no-oosplash" with "--nologo" and running "sudo update-mime"
works fine for me.
In the source these files are debian/libreoffice-*.mime
Thanks!
** Affects: libreoffice (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1070204
Title:
Mime info files include "-no-oosplash" option which no longer exists
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1070204/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069225] Re: Shotwell thumbnails not shown for raw photos in results
Yes, fixing CRW would be best, as I also get a blank preview image (which this patch can't help). I'll see if I can figure out what's going on. It may be that my CRW files have no embedded JPG preview. Thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069225 Title: Shotwell thumbnails not shown for raw photos in results To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1069225/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069644] [NEW] Unity help screen does not list Super+C for Photo lens
Public bug reported: Ubuntu 12.10 (quantal) The unity help screen (which appears when you hold the Super key) lists shortcuts for the App, Files, Video and Music lenses. However, it doesn't list the shortcut for the Photo lens, which is important since Super+C is not obvious. ** Affects: unity (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069644 Title: Unity help screen does not list Super+C for Photo lens To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1069644/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069225] Re: Shotwell thumbnails not shown for raw photos in results
** Also affects: unity-lens-photos Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069225 Title: Shotwell thumbnails not shown for raw photos in results To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1069225/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069225] [NEW] Shotwell thumbnails not shown for raw photos in results
Public bug reported: On 64-bit 12.10 (quantal) with unity-lens-photos 0.8-0ubuntu1. For search results that include raw photos (.CRW files in my case) the thumbnails are blank. The update_search_results() method looks for files in the thumbnails folder that have the same extension as the source file. However, at least for my files, Shotwell's thumbnails are .jpg and so aren't seen. A basic patch to fix my situation, attached, simply also checks for .jpg thumbnails (so it checks thumb1234.jpg after failing to find thumb1234.crw). A more thorough fix might be to check for thumb1234.* perhaps? ** Affects: unity-lens-photos (Ubuntu) Importance: Undecided Status: New ** Patch added: "Quick fix for raw thumbnails that also checks for thumbnails ending with .jpg" https://bugs.launchpad.net/bugs/1069225/+attachment/3406649/+files/simple_thumb_check.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069225 Title: Shotwell thumbnails not shown for raw photos in results To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-lens-photos/+bug/1069225/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069206] Re: Shotwell search results are slow
Related branch is a first round of reorganising the search code to be faster. Search times are now reduced to about three seconds on the same collection. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069206 Title: Shotwell search results are slow To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1069206/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069206] [NEW] Shotwell search results are slow
Public bug reported: On 64-bit 12.10 (quantal) with unity-lens-photos 0.8-0ubuntu1. With over 21000 photos in my collection the search results from Shotwell consistently take ten or twelve seconds to appear, which is longer than many users will wait before thinking it's not working. Needs to be faster if it's to be used regularly. ** Affects: unity-lens-photos Importance: Undecided Status: New ** Affects: unity-lens-photos (Ubuntu) Importance: Undecided Status: New ** Also affects: unity-lens-photos Importance: Undecided Status: New ** Branch linked: lp:~andrewmccarthy/unity-lens-photos/shotwellspeedup -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069206 Title: Shotwell search results are slow To manage notifications about this bug go to: https://bugs.launchpad.net/unity-lens-photos/+bug/1069206/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 589722] Re: when paused it should not inhibit the screensaver
Note: similar, but not identical, to bug #986785 ("vlc keeps inhibiting
the screensaver").
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/589722
Title:
when paused it should not inhibit the screensaver
To manage notifications about this bug go to:
https://bugs.launchpad.net/vlc/+bug/589722/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 986785] Re: vlc keeps inhibiting the screensaver
Note: similar, but not identical, to bug #589722 ("when paused it should
not inhibit the screensaver").
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/986785
Title:
vlc keeps inhibiting the screensaver
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/vlc/+bug/986785/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 966010] Re: /etc/bash.bashrc checks for command-not-found OR command-not-found-data
*** This bug is a duplicate of bug 561046 *** https://bugs.launchpad.net/bugs/561046 Thanks for taking the time to report this. I believe this is the same as bug #561046 (Debian bug 529313) which has been fixed in precise, due for final release next week. ** This bug has been marked a duplicate of bug 561046 [lucid] command-not-found can't be removed properly using apt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/966010 Title: /etc/bash.bashrc checks for command-not-found OR command-not-found- data To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bash/+bug/966010/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 927218] Re: Unable to unset setguid bit
Thanks for taking the time to report this. The behaviour you describe may seem surprising (and it was to me, too!), but is actually what the man page describes: chmod preserves a directory's set-user-ID and set-group-ID bits unless you explicitly specify otherwise. You can set or clear the bits with symbolic modes like u+s and g-s, and you can set (but not clear) the bits with a numeric mode. So, you can clear the setgid bit on the directory in your example with "chmod g-s Y", but not with "chmod 0775 Y". Since this is the defined behaviour that others may have come to expect for both interactive use and in long-established scripts, it's unlikely to be changed now. ** Package changed: bash (Ubuntu) => coreutils (Ubuntu) ** Changed in: coreutils (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/927218 Title: Unable to unset setguid bit To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/927218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 975826] Re: netstat showing negative values
*** This bug is a duplicate of bug 597236 *** https://bugs.launchpad.net/bugs/597236 Thanks for taking the time to report this. Looking more closely, this appears to be a duplicate of bug #597236, so I'll mark it as such. ** This bug has been marked a duplicate of bug 597236 netstat statistics overflow -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/975826 Title: netstat showing negative values To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/net-tools/+bug/975826/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 975826] Re: netstat showing negative values
*** This bug is a duplicate of bug 597236 *** https://bugs.launchpad.net/bugs/597236 Reassigning from bash to net-tools as the bug relates to the "netstat" command. ** Package changed: bash (Ubuntu) => net-tools (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/975826 Title: netstat showing negative values To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/net-tools/+bug/975826/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 898436] Re: rsync does not copy files from read-only directory
** Bug watch added: Samba Bugzilla #8183 https://bugzilla.samba.org/show_bug.cgi?id=8183 ** Also affects: rsync via https://bugzilla.samba.org/show_bug.cgi?id=8183 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/898436 Title: rsync does not copy files from read-only directory To manage notifications about this bug go to: https://bugs.launchpad.net/rsync/+bug/898436/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 883746] Re: cannot connect to ssh server
I have the exact same problem. It is also preventing Deja Dup from backing up my files. My server is on my local network, and I have also tried remote connecting from a friend's house, both fail with the same message after 10 minutes. In both situations, ssh and sshfs from the command line are successful with no problems or delays. "Error mounting location: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." gvfs-mount ssh://user@myserver fails with the same message after 10 minutes. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/883746 Title: cannot connect to ssh server To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/883746/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 773393] Re: liferea ext4 hdd
*** This bug is a duplicate of bug 290666 *** https://bugs.launchpad.net/bugs/290666 Thanks for taking the time to report this bug. I'm virtually certain this is a duplicate of bug #290666. If not, feel free to un-link this report. ** This bug has been marked a duplicate of bug 290666 Liferea stalling, uses excessive number of fsyncs -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/773393 Title: liferea ext4 hdd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/liferea/+bug/773393/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 805263] Re: package rsync 3.0.7-1ubuntu1.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
At the end of DpkgTerminalLog.txt there is an error about a syntax error in /etc/default/rsync. Can you check that file for mistakes? If you're not sure, you could attach it to this bug and I can double-check it for you. ** Changed in: rsync (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/805263 Title: package rsync 3.0.7-1ubuntu1.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsync/+bug/805263/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 887330] Re: package rsyslog 4.6.4-2ubuntu4.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 126
Thanks for updating the report so promptly. As it's not a bug in the package, I'll mark this bug as invalid. Feel free to reopen it if necessary. ** Changed in: rsyslog (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/887330 Title: package rsyslog 4.6.4-2ubuntu4.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 126 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsyslog/+bug/887330/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 665073] Re: rsync doesn't sync any more
Thanks for taking the time to report this. Can you confirm this is still a problem? If so, can you specify (a) the entire command you're entering to cause this, (b) the output from rsync (c) the filesystem type of both your hard-disk and the USB drive. Thanks! ** Changed in: rsync (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/665073 Title: rsync doesn't sync any more To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsync/+bug/665073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 674266] Re: rsync -a does not recurse
Marking incomplete pending feedback from original reporter. ** Changed in: rsync (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/674266 Title: rsync -a does not recurse To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsync/+bug/674266/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 722398] Re: fsck.ext3 segfault on corrupt filesystem
I just tried this using fsck.ext3 from e2fsprogs version 1.41.14-1ubuntu3 as currently available in oneiric, and the output is: $ fsck.ext3 -fpC0 dummy dummy: Superblock has an invalid journal (inode 8). CLEARED. *** ext3 journal has been deleted - filesystem is now ext2 only *** dummy: Corruption found in superblock. (frags_per_group = 0). dummy: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 32768 No segfault or crash any more. Can you confirm this? ** Changed in: e2fsprogs (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/722398 Title: fsck.ext3 segfault on corrupt filesystem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/722398/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 868864] Re: Drawing line randomly jumps to edge of screen in Gimp with Wacom Bamboo Fun
** Attachment added: "Jitters.png" https://bugs.launchpad.net/bugs/868864/+attachment/2515884/+files/Jitters.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/868864 Title: Drawing line randomly jumps to edge of screen in Gimp with Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/868864/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 868864] [NEW] Drawing line randomly jumps to edge of screen in Gimp with Wacom Bamboo Fun
Public bug reported: When using Gimp 2.6.11 and a Wacom Bamboo Fun tablet, the drawing line randomly jumps to the left, top, or top right corner of the screen. The cursor itself does not move, nor does this problem manifest in any other program. The stylus, eraser, cursor, and pad are all set to Screen mode in the Device Input dialog. This error does NOT occur when set to Disabled. The problem appears more pronounced when drawing straight vertical lines, but also occurs to a lesser extend with horizontal lines and an even lesser extent with curved lines. Attached is an image that illustrates the problem; the image shows the quick jumps while drawing circles and lines. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: gimp 2.6.11-2ubuntu4 ProcVersionSignature: Ubuntu 3.0.0-12.19-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 1.23-0ubuntu2 Architecture: amd64 Date: Wed Oct 5 23:18:25 2011 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gimp UpgradeStatus: Upgraded to oneiric on 2011-09-16 (19 days ago) ** Affects: gimp (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug oneiric running-unity -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/868864 Title: Drawing line randomly jumps to edge of screen in Gimp with Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/868864/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 864567] Re: compiz crashed with SIGABRT in raise()
** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/864567 Title: compiz crashed with SIGABRT in raise() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nux/+bug/864567/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 691070] Re: compiz assert failure: *** glibc detected *** compiz: corrupted double-linked list: 0x000000000195ae60 ***
Occurred in Oneiric with latest updates immediately upon opening Thunderbird. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/691070 Title: compiz assert failure: *** glibc detected *** compiz: corrupted double-linked list: 0x0195ae60 *** To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/691070/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 852316] Re: update-apt-xapian-index crashed with StopIteration in uri()
** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/852316 Title: update-apt-xapian-index crashed with StopIteration in uri() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt-xapian-index/+bug/852316/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 814926] Re: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun
I am happy to report that the tablet's pen functions work properly with the latest updates and kernel. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/814926 Title: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 819144] Re: [fglrx] everything is black and blinks when using unity
I am happy to report that, like Tim, Unity 3D now works perfectly well with fglrx with the latest updates. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/819144 Title: [fglrx] everything is black and blinks when using unity To manage notifications about this bug go to: https://bugs.launchpad.net/nux/+bug/819144/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 829826] Re: empathy-chat crashed with SIGSEGV in dbus_connection_dispatch()
** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/829826 Title: empathy-chat crashed with SIGSEGV in dbus_connection_dispatch() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/829826/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 830271] [NEW] Suggest commenting-out deb-src lines in default /etc/apt/sources.list
Public bug reported: During a trial install of 11.10 (oneiric) today almost 23MB of sources listings are downloaded (based on "du -csh /var/lib/apt/lists/*_Sources"). Each daily check thereafter will also re-download those files if they are updated. That's a huge waste of time and bandwidth given that the vast majority of users will never download a source packages. The tiny percentage that do will be able to enable the sources if they really want to. I suggest commenting out these lines by default to improve the speed of installation, marginally reduce disk space requirements, reduce bandwidth use both at install time and each day in the future, and to reduce load on mirrors. (I couldn't find a package that owns /etc/apt/sources.list so I'm filing this against the installer; apologies if it belongs elsewhere). ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/830271 Title: Suggest commenting-out deb-src lines in default /etc/apt/sources.list To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/830271/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 814926] Re: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun
Here's dmidecode. It doesn't appear that we can attach multiple attachments. :\ ** Attachment added: "dmidecode.txt" https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+attachment/2292963/+files/dmidecode.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/814926 Title: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 814926] Re: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun
Certainly. Lsinput's output is attached here. ** Attachment added: "lsinput.txt" https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+attachment/2292961/+files/lsinput.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/814926 Title: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 827095] Re: Banshee freezes when changing artist
I have waited up to eight minutes and nothing happens. The current track will continue to play even when frozen but it will not switch to the next track. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/827095 Title: Banshee freezes when changing artist To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/827095/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 827095] Re: Banshee freezes when changing artist
Yes, CPU usage on both cores exceeds 80% when this lockup occurs. The debug log and stacktrace are attached. ** Attachment added: "Output of banshee --debug." https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/827095/+attachment/2283980/+files/debug-output.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/827095 Title: Banshee freezes when changing artist To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/827095/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 827095] [NEW] Banshee freezes when changing artist
Public bug reported: When clicking an artist or album to navigate the music library, the interface freezes. Music continues to play, and no errors are reported when run from the command line. This is reproducible, and occurs without fail every time. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: banshee 2.1.0-1ubuntu5 ProcVersionSignature: Ubuntu 3.0.0-8.11-generic 3.0.1 Uname: Linux 3.0.0-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Tue Aug 16 00:00:44 2011 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: banshee UpgradeStatus: Upgraded to oneiric on 2011-08-14 (1 days ago) ** Affects: banshee (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug oneiric running-unity -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/827095 Title: Banshee freezes when changing artist To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/827095/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 827095] Re: Banshee freezes when changing artist
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/827095 Title: Banshee freezes when changing artist To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/827095/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 809865] Re: unity-panel-service crashed with SIGSEGV in g_closure_invoke()
Also occurred for me when clicking Insert in the LibreOffice Calc global menu bar. Program and Unity frozen temporarily, then kicked back the crash report. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/809865 Title: unity-panel-service crashed with SIGSEGV in g_closure_invoke() To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/809865/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 819144] Re: [fglrx] everything is black and blinks when using unity
I have this problem as well with Radeon HD 6480g. Open source drivers are not an option because they don't work at all (they cause a black screen on boot). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/819144 Title: [fglrx] everything is black and blinks when using unity To manage notifications about this bug go to: https://bugs.launchpad.net/nux/+bug/819144/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 816831] Re: Cannot drag and drop in Unity dash or to launcher
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/816831 Title: Cannot drag and drop in Unity dash or to launcher To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/816831/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 816831] [NEW] Cannot drag and drop in Unity dash or to launcher
Public bug reported: When attempting to drag and drop files to the launcher to be opened, the launcher appears but does not dim invalid programs. Dropping the file on a program does nothing, when in Natty it opens the dragged file with the program onto which it was dropped (the expected behavior). Likewise, attempting to drag an icon from the dash to the launcher does nothing. The icon gains a white background as if it has been clicked or hovered over, but the icon does not drag as expected and cannot be dropped onto the launcher. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: unity 4.4.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.0.0-7.8-generic 3.0.0 Uname: Linux 3.0.0-7-generic i686 Architecture: i386 CheckboxSubmission: 530c34a58a182414c5a635709e60c515 CheckboxSystem: fedf0d175245021ddc5135b5fb80f89b CompizPlugins: [core,bailer,detection,composite,opengl,decor,copytex,compiztoolbox,move,workarounds,grid,resize,imgpng,place,mousepoll,regex,commands,notification,obs,expo,gnomecompat,vpswitch,snap,session,resizeinfo,unitymtgrabhandles,ezoom,wall,staticswitcher,fade,scale,unityshell] Date: Wed Jul 27 03:59:26 2011 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: Upgraded to oneiric on 2011-07-22 (5 days ago) ** Affects: unity (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 oneiric running-unity unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/816831 Title: Cannot drag and drop in Unity dash or to launcher To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/816831/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 673536] Re: Delete "lost+found" folder automatically if it's empty
Hi Simon, lost+found is not only re-created by e2fsck, but also when the filesystem is created. It's meant to be there in advance and left untouched at all times so that in normal operation there's no likely way a crash could break it. In a badly mangled situation, you don't really want e2fsck creating new directories and possibly overwriting data; a pre-existing lost+found is much safer. Does that make sense? ** Changed in: e2fsprogs (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/673536 Title: Delete "lost+found" folder automatically if it's empty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/673536/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 796717] Re: e2fsck not fixing some fs errors
Hi, Austin. It certainly sounds like it may have been a weird dying- hardware bug. Whatever it was, without an "unfixable" filesystem I see no way to pursue this further. Feel free to re-open if that changes. ** Changed in: e2fsprogs (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/796717 Title: e2fsck not fixing some fs errors To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/796717/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 735392] Re: externally viewed attachments not deleted from /tmp
** Bug watch added: Debian Bug tracker #569500 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=569500 ** Also affects: mutt (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=569500 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/735392 Title: externally viewed attachments not deleted from /tmp To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutt/+bug/735392/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 815798] Re: [i915gm] GPU lockup EIR: 0x00000010 PGTBL_ER: 0x00000100 render.IPEHR: 0x02000004
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/815798 Title: [i915gm] GPU lockup EIR: 0x0010 PGTBL_ER: 0x0100 render.IPEHR: 0x0204 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/815798/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 815798] [NEW] [i915gm] GPU lockup EIR: 0x00000010 PGTBL_ER: 0x00000100 render.IPEHR: 0x02000004
Public bug reported: Apport reports a GPU crash without fail after every suspend/resume cycle. The functionality of the computer appears to be unaffected, though. ProblemType: Crash DistroRelease: Ubuntu 11.10 Package: xserver-xorg-video-intel 2:2.15.0-3ubuntu2 ProcVersionSignature: Ubuntu 3.0.0-6.7-generic 3.0.0-rc7 Uname: Linux 3.0.0-6-generic i686 Architecture: i386 BootLog: fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda2: clean, 324507/655360 files, 1668623/2621184 blocks Linux_Home: clean, 79489/6545408 files, 12735361/26159616 blocks Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Chipset: i915gm CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz Date: Mon Jul 25 01:19:49 2011 DistUpgraded: Log time: 2011-07-22 00:26:16.817036 DistroCodename: oneiric DistroVariant: ubuntu DkmsStatus: virtualbox, 4.0.10, 3.0.0-6-generic, i686: installed DuplicateSignature: [i915gm] GPU lockup EIR: 0x0010 PGTBL_ER: 0x0100 render.IPEHR: 0x0204 Ubuntu 11.10 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py GraphicsCard: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Uniwill Computer Corp Device [1584:9800] Subsystem: Uniwill Computer Corp Device [1584:9800] InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) InterpreterPath: /usr/bin/python2.7 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: ALIENWARE 255/259 Series PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-6-generic root=UUID=2a79b732-f48c-4ead-ac45-09b92b7ffee7 ro quiet splash vt.handoff=7 RelatedPackageVersions: xserver-xorg 1:7.6+7ubuntu6 libdrm2 2.4.26-1ubuntu1 xserver-xorg-video-intel 2:2.15.0-3ubuntu2 SourcePackage: xserver-xorg-video-intel Title: [i915gm] GPU lockup EIR: 0x0010 PGTBL_ER: 0x0100 render.IPEHR: 0x0204 UpgradeStatus: Upgraded to oneiric on 2011-07-22 (3 days ago) UserGroups: dmi.bios.date: 04/21/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2.03W dmi.board.name: 255/259 Series dmi.board.vendor: ALIENWARE dmi.chassis.type: 10 dmi.chassis.vendor: American Megatrends Inc dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2.03W:bd04/21/2006:svnALIENWARE:pn255/259Series:pvr:rvnALIENWARE:rn255/259Series:rvr:cvnAmericanMegatrendsInc:ct10:cvr: dmi.product.name: 255/259 Series dmi.sys.vendor: ALIENWARE version.compiz: compiz 1:0.9.5.0-0ubuntu1 version.libdrm2: libdrm2 2.4.26-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 7.11~1-0ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 7.11~1-0ubuntu4 version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.2-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.0-3ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110411+8378443-1 ** Affects: xserver-xorg-video-intel (Ubuntu) Importance: Undecided Status: New ** Tags: apport-crash compiz-0.9 false-gpu-hang freeze i386 need-duplicate-check oneiric reproducible ubuntu unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/815798 Title: [i915gm] GPU lockup EIR: 0x0010 PGTBL_ER: 0x0100 render.IPEHR: 0x0204 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/815798/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 814926] Re: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/814926 Title: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 814926] [NEW] Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun
Public bug reported: The tablet is recognized and the scroll circle works perfectly, as well as motion tracking of the pen and clicking via tapping, but the middle click and right click buttons on the pen do nothing. Right click functionality appears to be incorrectly mapped to the > button on the tablet. The tablet in question is a Wacom Bamboo Fun CTE-450. In previous Ubuntu versions, the pen worked fine but the tablet did not, so this is both a regression of Onieric as well as progress. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: xserver-xorg-input-wacom 1:0.11.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.0.0-6.7-generic 3.0.0-rc7 Uname: Linux 3.0.0-6-generic i686 Architecture: i386 BootLog: fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda2 has been mounted 21 times without being checked, check forced. Linux_Home: clean, 78944/6545408 files, 13615033/26159616 blocks /dev/sda2: 324123/655360 files (0.3% non-contiguous), 1654295/2621184 blocks CheckboxSubmission: 530c34a58a182414c5a635709e60c515 CheckboxSystem: fedf0d175245021ddc5135b5fb80f89b CompizPlugins: [core,bailer,detection,composite,opengl,decor,compiztoolbox,move,workarounds,grid,resize,imgpng,place,mousepoll,commands,obs,expo,gnomecompat,vpswitch,snap,session,unitymtgrabhandles,ezoom,wall,staticswitcher,fade,scale,addhelper,unityshell] CompositorRunning: compiz Date: Fri Jul 22 22:12:05 2011 DistUpgraded: Log time: 2011-07-22 00:26:16.817036 DistroCodename: oneiric DistroVariant: ubuntu DkmsStatus: virtualbox, 4.0.10, 3.0.0-6-generic, i686: installed GraphicsCard: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Uniwill Computer Corp Device [1584:9800] Subsystem: Uniwill Computer Corp Device [1584:9800] InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) MachineType: ALIENWARE 255/259 Series PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-6-generic root=UUID=2a79b732-f48c-4ead-ac45-09b92b7ffee7 ro quiet splash vt.handoff=7 SourcePackage: xf86-input-wacom UpgradeStatus: Upgraded to oneiric on 2011-07-22 (0 days ago) dmi.bios.date: 04/21/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2.03W dmi.board.name: 255/259 Series dmi.board.vendor: ALIENWARE dmi.chassis.type: 10 dmi.chassis.vendor: American Megatrends Inc dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2.03W:bd04/21/2006:svnALIENWARE:pn255/259Series:pvr:rvnALIENWARE:rn255/259Series:rvr:cvnAmericanMegatrendsInc:ct10:cvr: dmi.product.name: 255/259 Series dmi.sys.vendor: ALIENWARE version.compiz: compiz 1:0.9.5.0-0ubuntu1 version.libdrm2: libdrm2 2.4.26-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 7.11~1-0ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 7.11~1-0ubuntu4 version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu5 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.2-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.0-3ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110411+8378443-1 ** Affects: xf86-input-wacom (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug compiz-0.9 i386 oneiric regression reproducible running-unity ubuntu unity-2d -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/814926 Title: Pen buttons do not work; cannot middle or right click on Wacom Bamboo Fun To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/814926/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 805807] Re: Sound is not synchronised with the video
I can confirm this also on amd64, and that downgrading to 1.1.9-1ubuntu1.1 fixes it. This is mentioned in bug #743323 around comment 32 onwards. ** Changed in: vlc (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/805807 Title: Sound is not synchronised with the video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/vlc/+bug/805807/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 574747] Re: Does not hyperlink multi-line urls
Looking at this again, I wonder is it a result of the screen being displayed by libncurses? Perhaps curses is forcing a line-break (since it knows it's at the end of the line) and gnome-terminal considers that a break in the URL? In a plain bash session, it's gnome-terminal wrapping the line, so it handles a break it created correctly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/574747 Title: Does not hyperlink multi-line urls To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutt/+bug/574747/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 781180] Re: gvim loses menu with Unity interface
This also looks a lot like bug #776499, another bug about missing menus with several duplicate bugs. Should they be merged? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/781180 Title: gvim loses menu with Unity interface -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 787931] Re: GVim fails to create a menu
*** This bug is a duplicate of bug 781180 *** https://bugs.launchpad.net/bugs/781180 Thanks for taking the time to report this. Based on the information given this looks the same as bug #781180, so I'll mark it as a duplicate. If not, feel free to un-duplicate. ** This bug has been marked a duplicate of bug 781180 gvim loses menu with Unity interface -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/787931 Title: GVim fails to create a menu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 741623] Re: Segfault if doing bad search and then research
Thanks for reporting this bug. This appears to have been fixed in mutt 1.5.21, which is available in Ubuntu since 11.04 (natty). Closing as Fix Released. ** Bug watch added: Mutt Trac #3315 http://dev.mutt.org/trac/ticket/3315 ** Also affects: mutt via http://dev.mutt.org/trac/ticket/3315 Importance: Unknown Status: Unknown ** Changed in: mutt (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/741623 Title: Segfault if doing bad search and then research -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 758913] Re: captcha is not displayed when createing a new account for ubuntu one
Since I accepted the ssl certificate manually it has been working. I'm not an expert but this could have been resolved by #758831. (I do notice that the source of the login does not seem to have a direct https address to a captcha? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/758913 Title: captcha is not displayed when createing a new account for ubuntu one -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 767893] Re: package apport 1.20.1-0ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 767829 *** https://bugs.launchpad.net/bugs/767829 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/767893 Title: package apport 1.20.1-0ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 767893] [NEW] package apport 1.20.1-0ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 767829 *** https://bugs.launchpad.net/bugs/767829 Public bug reported: Binary package hint: apport Running routine update/upgrade today and apport failed to install, as well as apport-gtk, which depends on it. A reboot and second attempt does not solve this error. In a terminal, apt-get dist-upgrade returns: Setting up apport (1.20.1-0ubuntu4) ... start: Job failed to start invoke-rc.d: initscript apport, action "start" failed. dpkg: error processing apport (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of apport-gtk: apport-gtk depends on apport (>= 0.41); however: Package apport is not configured yet. dpkg: error processing apport-gtk (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: apport apport-gtk E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 11.04 Package: apport 1.20.1-0ubuntu4 Uname: Linux 2.6.39-999-generic i686 Architecture: i386 Date: Wed Apr 20 19:17:48 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) PackageArchitecture: all SourcePackage: apport Title: package apport 1.20.1-0ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to natty on 2011-04-15 (5 days ago) ** Affects: apport (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/767893 Title: package apport 1.20.1-0ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 715096] Re: [i945gm] GPU lockup (ESR: 0x00000001 IPEHR: 0x02000011)
This bug no longer affects me after upgrading to the kernel Bryce suggested. Occasionally a GPU lockup occurs, but the error code is different, indicating it is a different problem. Regardless, the lockup occurs much less frequently and looks different (flickering windows as opposed to glitchy wash of colored pixels). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/715096 Title: [i945gm] GPU lockup (ESR: 0x0001 IPEHR: 0x0211) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
