[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
I never did any further testing after my last message. Unfortunately, as of a couple weeks ago I no longer have access to that computer, so will be unable to do any further testing on this bug. Sorry about that. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
It won't even hibernate. When I run pm-hibernate, the screen goes blank for a second or two, and then it flashes the following on the screen: mei_me :00:15.0: suspend serial 00:a0: activation failed dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -5 PM: Device 00:0a failed to thaw: error -5 And then it shuts down. It won't resume when I turn it on again, but instead is a fresh reboot. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
I tested trusty-desktop-amd64 dated Nov 12, and it has the same problem. I could not test 13.04 without checking "Enable Legacy Option ROMs" in the BIOS. When I did that, 13.04 had the same problem. So I enabled Legacy Boot in the BIOS and both 13.04 (using legacy boot) and 13.10 (using UEFI while Legacy was enabled) had the same problem. I even tried Fedora Core 19 (Kernel 3.9.5) and it had the same problem. I suspect this is a kernel issue with this machine and not Ubuntu specific. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
I never ran anything other than Saucy on this machine. Because I was testing UEFI issues, I was trying to work with with as pure a UEFI system as I could. Raring live usb had troubles with X working when I turned off legacy drivers, so I tried saucy pre-release and it worked and installed just fine. Everything works great except for suspend. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
I upgraded the BIOS from A14 to A16, and it still behaves the same way. $ sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date A16 09/09/2013 Here's how it goes: I tell it to suspend and it does, and the power light flashes. I press the space bar, and then the power light turns off. A second or so later, it flashes once, and then it's off again. A few seconds later, it boots again starting with the "BIOS" screen. The "BIOS" is set to be pure UEFI with no legacy drivers. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
I coincidentally disabled Secure Boot, but it behaves the same whether Secure Boot is enabled or not. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] Re: [Dell Inc. OptiPlex 7010] suspend/resume failure
** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1227678] [NEW] [Dell Inc. OptiPlex 7010] suspend/resume failure
Public bug reported: This has happened multiple times. I suspend when I leave work. When I arrive in the morning the power light shows it is suspended, but when I press a key on the keyboard to wake up, it takes a few seconds, and then the system reboots. I don't know if the system has ever suspended/resumed correctly. I set the system firmware to run pure UEFI with no legacy drivers and I enabled Secure Boot. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.13 ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0 Uname: Linux 3.11.0-7-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: vic2295 F pulseaudio /dev/snd/controlC2: vic2295 F pulseaudio /dev/snd/controlC0: vic2295 F pulseaudio Date: Thu Sep 19 08:49:11 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=e96f77ca-f3de-400f-a340-7d80e17eddef InstallationDate: Installed on 2013-09-10 (8 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130910) InterpreterPath: /usr/bin/python3.3 IwConfig: eth0 no wireless extensions. lono wireless extensions. virbr0no wireless extensions. MachineType: Dell Inc. OptiPlex 7010 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic.efi.signed root=UUID=75b07d7e-d28b-4b14-93ec-1d43abe9fbb9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 RfKill: SourcePackage: linux Title: [Dell Inc. OptiPlex 7010] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 06/10/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A14 dmi.board.name: 0GY6Y8 dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 6 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA14:bd06/10/2013:svnDellInc.:pnOptiPlex7010:pvr01:rvnDellInc.:rn0GY6Y8:rvrA01:cvnDellInc.:ct6:cvr: dmi.product.name: OptiPlex 7010 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-kerneloops resume saucy suspend -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1227678 Title: [Dell Inc. OptiPlex 7010] suspend/resume failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227678/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 817875] Re: vte with scrollbar keeps growing in width
I can reproduce the problem with a Natty Live CD, but cannot reproduce it when testing with a recent Oneiric daily build Live CD. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/817875 Title: vte with scrollbar keeps growing in width To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/vte/+bug/817875/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 817875] [NEW] vte with scrollbar keeps growing in width
Public bug reported: In Natty with thin scrollbars, a vte widget inside a Scrollwindow will keep incrementally growing wider and wider. This only happens with no horizontal scrollbar and with vertical scrollbar, and it only happens with the thin scrollbars on Natty. If the old-style scrollbars are used, this is not a problem. The following code will show the problem: - #!/usr/bin/env python import gtk import vte v = vte.Terminal() v.connect ("child-exited", lambda term: gtk.main_quit()) scroll = gtk.ScrolledWindow() scroll.set_policy(gtk.POLICY_NEVER,gtk.POLICY_ALWAYS) scroll.add(v) window = gtk.Window() window.add(scroll) window.connect('delete-event', lambda window, event: gtk.main_quit()) window.show_all() gtk.main() If set_policy is (gtk.POLICY_ALWAYS,gtk.POLICY_ALWAYS) or (gtk.POLICY_AUTOMATIC,gtk.POLICY_NEVER) then it is not a problem. If it is (gtk.POLICY_NEVER,gtk.POLICY_NEVER) it has the same problem as Bug #635400 - could they be related? libvte9 1:0.27.90-0ubuntu1 python-vte 1:0.27.90-0ubuntu1 python-gtk2 2.22.0-0ubuntu1.1 python2.7 2.7.1-5ubuntu2 ** Affects: vte (Ubuntu) Importance: Undecided Status: New ** Description changed: In Natty with thin scrollbars, a vte widget inside a Scrollwindow will keep incrementally growing wider and wider. This only happens with no horizontal scrollbar and with vertical scrollbar, and it only happens with the thin scrollbars on Natty. If the old-style scrollbars are used, this is not a problem. The following code will show the problem: - #!/usr/bin/env python import gtk import vte v = vte.Terminal() v.connect ("child-exited", lambda term: gtk.main_quit()) scroll = gtk.ScrolledWindow() scroll.set_policy(gtk.POLICY_NEVER,gtk.POLICY_ALWAYS) scroll.add(v) window = gtk.Window() window.add(scroll) window.connect('delete-event', lambda window, event: gtk.main_quit()) window.show_all() gtk.main() - If set_policy is (gtk.POLICY_ALWAYS,gtk.POLICY_ALWAYS) or (gtk.POLICY_AUTOMATIC,gtk.NEVER) then it is not a problem. - If it is (gtk.POLICY_NEVER,gtk.NEVER) it has the same problem as Bug - #635400 - could they be related? + If set_policy is (gtk.POLICY_ALWAYS,gtk.POLICY_ALWAYS) + or (gtk.POLICY_AUTOMATIC,gtk.POLICY_NEVER) then it is not a problem. + + If it is (gtk.POLICY_NEVER,gtk.POLICY_NEVER) it has the same problem as + Bug #635400 - could they be related? libvte9 1:0.27.90-0ubuntu1 python-vte1:0.27.90-0ubuntu1 python-gtk2 2.22.0-0ubuntu1.1 python2.7 2.7.1-5ubuntu2 ** Description changed: In Natty with thin scrollbars, a vte widget inside a Scrollwindow will keep incrementally growing wider and wider. This only happens with no horizontal scrollbar and with vertical scrollbar, and it only happens with the thin scrollbars on Natty. If the old-style scrollbars are used, this is not a problem. The following code will show the problem: - #!/usr/bin/env python import gtk import vte v = vte.Terminal() v.connect ("child-exited", lambda term: gtk.main_quit()) scroll = gtk.ScrolledWindow() scroll.set_policy(gtk.POLICY_NEVER,gtk.POLICY_ALWAYS) scroll.add(v) window = gtk.Window() window.add(scroll) window.connect('delete-event', lambda window, event: gtk.main_quit()) window.show_all() gtk.main() - If set_policy is (gtk.POLICY_ALWAYS,gtk.POLICY_ALWAYS) + If set_policy is (gtk.POLICY_ALWAYS,gtk.POLICY_ALWAYS) or (gtk.POLICY_AUTOMATIC,gtk.POLICY_NEVER) then it is not a problem. - If it is (gtk.POLICY_NEVER,gtk.POLICY_NEVER) it has the same problem as + If it is (gtk.POLICY_NEVER,gtk.POLICY_NEVER) it has the same problem as Bug #635400 - could they be related? libvte9 1:0.27.90-0ubuntu1 python-vte1:0.27.90-0ubuntu1 python-gtk2 2.22.0-0ubuntu1.1 python2.7 2.7.1-5ubuntu2 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/817875 Title: vte with scrollbar keeps growing in width To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/vte/+bug/817875/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 635400] Re: vte widget allows window to expand but not shrink
I just tested it on Natty, and it is still a problem. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/635400 Title: vte widget allows window to expand but not shrink To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/vte/+bug/635400/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 762478] Re: [nouveau] No icons shown in unity launcher
This problem is discussed in bug #768178 and it seems they may have a solution? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/762478 Title: [nouveau] No icons shown in unity launcher -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 566818] Re: [Lucid] cryptsetup passphrase prompt during boot: every character typed repeats the prompt
Is this related to Bug 546251? -- [Lucid] cryptsetup passphrase prompt during boot: every character typed repeats the prompt https://bugs.launchpad.net/bugs/566818 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 521453] Re: ebox webinterface not working properly
regarding the user corner problem, I found that if I delete the contents of /var/lib/ebox-usercorner/sids then it works again. When a user logs out, their file in that space is usually deleted. I'm not exactly sure the problem, but it was giving me errors (in /var/log/ebox-usercorner/error.log) about Could not open /var/lib/ebox-usercorner/sids/user_name where the file user_name (and some others) were remaining there. Perhaps the users didn't log out and the server was reset or something. -- ebox webinterface not working properly https://bugs.launchpad.net/bugs/521453 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 568782] Re: cannot install two linux-backports-modules-wireless packages
Response to automated message: This is a packaging issue of extra modules, not a kernel bug. ** Tags removed: needs-upstream-testing -- cannot install two linux-backports-modules-wireless packages https://bugs.launchpad.net/bugs/568782 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 568782] Re: cannot install two linux-backports-modules-wireless packages
** Attachment added: "AlsaDevices.txt" http://launchpadlibrarian.net/45061842/AlsaDevices.txt ** Attachment added: "AplayDevices.txt" http://launchpadlibrarian.net/45061843/AplayDevices.txt ** Attachment added: "ArecordDevices.txt" http://launchpadlibrarian.net/45061844/ArecordDevices.txt ** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/45061845/BootDmesg.txt ** Attachment added: "Card0.Amixer.values.txt" http://launchpadlibrarian.net/45061846/Card0.Amixer.values.txt ** Attachment added: "Card0.Codecs.codec97.0.ac97.0.0.txt" http://launchpadlibrarian.net/45061847/Card0.Codecs.codec97.0.ac97.0.0.txt ** Attachment added: "Card0.Codecs.codec97.0.ac97.0.0.regs.txt" http://launchpadlibrarian.net/45061848/Card0.Codecs.codec97.0.ac97.0.0.regs.txt ** Attachment added: "CurrentDmesg.txt" http://launchpadlibrarian.net/45061849/CurrentDmesg.txt ** Attachment added: "Lspci.txt" http://launchpadlibrarian.net/45061850/Lspci.txt ** Attachment added: "PciMultimedia.txt" http://launchpadlibrarian.net/45061851/PciMultimedia.txt ** Attachment added: "ProcCpuinfo.txt" http://launchpadlibrarian.net/45061852/ProcCpuinfo.txt ** Attachment added: "ProcInterrupts.txt" http://launchpadlibrarian.net/45061853/ProcInterrupts.txt ** Attachment added: "ProcModules.txt" http://launchpadlibrarian.net/45061854/ProcModules.txt ** Attachment added: "UdevDb.txt" http://launchpadlibrarian.net/45061855/UdevDb.txt ** Attachment added: "UdevLog.txt" http://launchpadlibrarian.net/45061856/UdevLog.txt ** Attachment added: "WifiSyslog.txt" http://launchpadlibrarian.net/45061857/WifiSyslog.txt -- cannot install two linux-backports-modules-wireless packages https://bugs.launchpad.net/bugs/568782 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 568782] [NEW] cannot install two linux-backports-modules-wireless packages
Public bug reported: linux-backports-modules-wireless-lucid-generic is already installed, so linux-backports-modules-wireless-2.6.32-20-generic is installed When upgrading to kernel 2.6.32-21, it tries to install linux-backports-modules-wireless-2.6.32-21-generic but has a conflict with the -20 package: trying to overwrite '/lib/udev/compat_firmware.sh', which is also in package linux-backports-modules-wireless-2.6.32-20-generic 0:2.6.32-20.10 Since the system keeps two kernels on, these two backports-modules- wireless package need to be able to co-exist. Or it needs to replace the -20 package with the -21 package. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-backports-modules-wireless-lucid-generic 2.6.32.21.22 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: vic1622 F pulseaudio /dev/snd/pcmC0D0p: vic1622 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'CK8S'/'NVidia CK8S with ALC850 at irq 20' Mixer name : 'Realtek ALC850 rev 0' Components : 'AC97a:414c4790' Controls : 42 Simple ctrls : 27 Date: Fri Apr 23 11:17:47 2010 Dependencies: HibernationDevice: RESUME=UUID=be5c2308-4af2-465a-b8ce-5ee0c164e980 InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100317.1) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Bus 003 Device 002: ID 045e:0024 Microsoft Corp. Trackball Explorer Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTek Computer Inc. K8N ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-21-generic root=/dev/mapper/geek-root ro ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 RfKill: SourcePackage: linux dmi.bios.date: 09/06/2005 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1009 dmi.board.name: 'K8N' dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1009:bd09/06/2005:svnASUSTekComputerInc.:pnK8N:pvrSystemVersion:rvnASUSTeKComputerINC.:rn'K8N':rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: K8N dmi.product.version: System Version dmi.sys.vendor: ASUSTek Computer Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid needs-upstream-testing -- cannot install two linux-backports-modules-wireless packages https://bugs.launchpad.net/bugs/568782 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 553746] Re: Cannot Change User and Group ID
As of Lucid beta2, you still cannot change a UID (well, you can change it but it has no effect). If you can't actually change the UID, then it's better to not even allow that in the interface. -- Cannot Change User and Group ID https://bugs.launchpad.net/bugs/553746 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 553746] Re: Cannot Change User and Group ID
How about setting a UserID on create? We used to be able to. -- Cannot Change User and Group ID https://bugs.launchpad.net/bugs/553746 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 553746] Re: Cannot Change User and Group ID
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/42847623/Dependencies.txt -- Cannot Change User and Group ID https://bugs.launchpad.net/bugs/553746 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 553746] [NEW] Cannot Change User and Group ID
Public bug reported: Binary package hint: gnome-system-tools Changing a User ID (or Group ID) in the "User Settings" dialog has no effect. Furthermore, adding a new user gives you no opportunity to set the User ID. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: gnome-system-tools 2.29.92-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-18.27-generic 2.6.32.10+drm33.1 Uname: Linux 2.6.32-18-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Fri Apr 2 10:10:56 2010 InstallationMedia: Error: [Errno 13] Permission denied: '/var/log/installer/media-info' ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: gnome-system-tools ** Affects: gnome-system-tools (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- Cannot Change User and Group ID https://bugs.launchpad.net/bugs/553746 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 323270] Re: DeprecationWarning: the md5 module is deprecated; use hashlib instead
It appears to be fixed in Jaunty in the latest update. -- DeprecationWarning: the md5 module is deprecated; use hashlib instead https://bugs.launchpad.net/bugs/323270 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 323270] Re: DeprecationWarning: the md5 module is deprecated; use hashlib instead
This is still a problem in jaunty. -- DeprecationWarning: the md5 module is deprecated; use hashlib instead https://bugs.launchpad.net/bugs/323270 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 338559] [NEW] subvertpy 0.6.1-1build1 uses md5 which is deprecated in python 2.6
Public bug reported: the file delta.py uses the md5 module, but it is deprecated in python 2.6, causing a warning when it is used The bug https://bugs.launchpad.net/subvertpy/+bug/323270 shows that the subvertpy package has been fixed, but the error is still in the jaunty packages ** Affects: subvertpy (Ubuntu) Importance: Undecided Status: New -- subvertpy 0.6.1-1build1 uses md5 which is deprecated in python 2.6 https://bugs.launchpad.net/bugs/338559 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 328898] [NEW] bzr svn-upgrade requires bzr-rebase at least 0.4.3
Public bug reported: Binary package hint: bzr-svn Jaunty upgrades bzr-svn to 0.5.0 and this changed the revision-ids (specifically '%2F' to '/') running 'bzr svn-upgrade' states bzr-rebase version of at least 0.4.3 is required, but jaunty only packages 0.4.2 can we instead package bzr-rebase 0.4.3? ** Affects: bzr-svn (Ubuntu) Importance: Undecided Status: New -- bzr svn-upgrade requires bzr-rebase at least 0.4.3 https://bugs.launchpad.net/bugs/328898 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 302403] [NEW] rsync 3.0.3 fails with rssh to some older servers
Public bug reported: Binary package hint: rsync Using rsync 3.0.3-2ubuntu1 on intrepid over rssh to a version 2.6.6 server, rsync -a directory [EMAIL PROTECTED]:~/ fails with "insecure -e option not allowed." This can be worked around with --protocol=29 but it has been fixed in rsync 3.0.4 (where the announcement says, "Rsync version 3.0.4 has been released. This is a bug-fix release with the only enhancement being the adding of a way to interact with an overly-restrictive server that refuses rsync's behind-the-scenes use of the -e option.") Can we fix this for intrepid, or if not at least put 3.0.4 in the backports? ** Affects: rsync (Ubuntu) Importance: Undecided Status: New -- rsync 3.0.3 fails with rssh to some older servers https://bugs.launchpad.net/bugs/302403 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 67882] Re: can not enter Chinese in scribus and lyx.
Launching scribus-ng on Hardy (scribus-ng 1.3.4.dfsg+svn20071115-1ubuntu1), story editor defaults to font Arial Regular I type in Chinese, hit RETURN, and it crashes with "Scribus crashes due to Signal #6" sent to console: sending IMEnd with 3 chars to 0x915a5a8, text=??? sending IMStart with 0 chars to 0x915a5a8 sending IMCompose to 0x915a5a8 with 0 chars, cpos=0, sellen=0, text= sending IMEnd with 0 chars to 0x915a5a8, text= scribus-ng: /build/buildd/scribus-ng-1.3.4.dfsg+svn20071115/scribus/text/storytext.cpp:307: void StoryText::insertChars(int, QString, bool): Assertion `pos <= length()' failed. Scribus Crash - Scribus crashes due to Signal #6 QGArray::at: Absolute index 12 out of range If, however, I change the font in the Story Editor to AR PL UKai CN Book, it has no problems. This is exactly how it behaved earlier. If the font does not support the characters, the story editor it rejects them and scribus becomes unstable. If I copy and paste in, it works fine, even with a non-chinese font. Then the main screen shows squares where the font does not support the characters. And the story editor still shows the characters. So the problem is entirely how the story editors works with input. If I try to input into the text box directly, I am unable to type any Chinese. I think this is a known problem: http://bugs.scribus.net/view.php?id=4305 -- can not enter Chinese in scribus and lyx. https://bugs.launchpad.net/bugs/67882 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222673] Re: language-pack-gnome-pt-base has pt-br translation
I installed the package and zh-CN seems to be working fine. -- language-pack-gnome-pt-base has pt-br translation https://bugs.launchpad.net/bugs/222673 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134503] Re: Upgrade Feisty -> Gutsy: Privileged user not in "lpadmin" group any more
In a clean gutsy install, my normal user is not able to add a printer. I resorted to % sudo /usr/share/system-config-printer/system-config-printer.py in order to do it. It sure seems a problem to me in gutsy. BTW, this was adding a network (JetDirect) printer for what its worth. -- Upgrade Feisty -> Gutsy: Privileged user not in "lpadmin" group any more https://bugs.launchpad.net/bugs/134503 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 157362] Incompatiblity with Compress::Zlib
Public bug reported: Binary package hint: debmirror On upgrade to Gutsy, it broke debmirror. In fact, on execution it deletes everything in the destination repository when using --cleanup The problem is line on 793 of the Parse Packages and Sources files section: local $/="\n\n"; which conflicts with Compress::Zlib's gzreadline() The current version of gzreadline does not ignore $/ but the previous version did. Thus debmirror reads in a while block at a time rather than a line at a time. Deleting this line solves the problem. Here is the debmirror command I was using: debmirror --host="server" --user="anonymous" --root="/ubuntu" --method="ftp" --dist="gutsy,gutsy-updates,gutsy-backports,gutsy- security" --section="main,restricted,universe,multiverse" --arch="i386" --nosource --cleanup --verbose --ignore-release-gpg ubuntu ** Affects: debmirror (Ubuntu) Importance: Undecided Status: New -- Incompatiblity with Compress::Zlib https://bugs.launchpad.net/bugs/157362 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 157362] Re: Incompatiblity with Compress::Zlib
** Description changed: Binary package hint: debmirror On upgrade to Gutsy, it broke debmirror. In fact, on execution it deletes everything in the destination repository when using --cleanup The problem is line on 793 of the Parse Packages and Sources files section: local $/="\n\n"; - which conflicts with Compress::Zlib's gzreadline() + which seems to be in conflict with Compress::Zlib's gzreadline() The current version of gzreadline does not ignore $/ but the previous version did. - Thus debmirror reads in a while block at a time rather than a line at a time. + Thus gzreadline reads in a whole block at a time rather than a line at a time, but the code is written to deal with a line at a time. Deleting this line solves the problem. Here is the debmirror command I was using: debmirror --host="server" --user="anonymous" --root="/ubuntu" --method="ftp" --dist="gutsy,gutsy-updates,gutsy-backports,gutsy- security" --section="main,restricted,universe,multiverse" --arch="i386" --nosource --cleanup --verbose --ignore-release-gpg ubuntu -- Incompatiblity with Compress::Zlib https://bugs.launchpad.net/bugs/157362 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85405] Re: installer partitioner with existing LVM is confusing
Attached is the installer partman file from /var/log/installer/partman. The LVM physical partition is sda8 ** Attachment added: "/var/log/installer/partman file" http://librarian.launchpad.net/6444888/partman.gz -- installer partitioner with existing LVM is confusing https://launchpad.net/bugs/85405 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 85405] installer partitioner with existing LVM is confusing
Public bug reported: Binary package hint: partman-lvm This is daily build 20070215.2 feisty-alternate-i386 installer: If LVM logical volumes already exist, and choosing Manual Partitioning, the LVM partition shows up as no file system, with no indication that it is a PV. There is no indication (including in help) that I should set "use as" to "physical volume for LVM". Only then does it show "Configure the Logical Volume Manager". Selecting this says it will write changes to the disk which strikes great fear into my heart that it might overwrite the whole PV. The installer should detect that it is already a PV, and going into "Configure the Logical Volume Manager" should not entail a write to the disk, similar to going into "Configure the Logical Volume Manager" after a volume group has already been activated. note: this is similar to bug 39211 ** Affects: partman-lvm (Ubuntu) Importance: Undecided Status: Unconfirmed ** Description changed: Binary package hint: partman-lvm This is daily build 20070215.2 feisty-alternate-i386 installer: If LVM logical volumes already exist, and choosing Manual Partitioning, the LVM partition shows up as no file system, with no indication that it is a PV. There is no indication (including in help) that I should set "use as" to "physical volume for LVM". Only then does it show "Configure the Logical Volume Manager". Selecting this says it will write changes to the disk which strikes great fear into my heart that it might overwrite the whole PV. The installer should detect that it is already a PV, and going into "Configure the Logical Volume Manager" should not entail a write to the disk, similar to going into "Configure the Logical Volume Manager" after a volume group has already been activated. + + note: this is similar to bug 39211 -- installer partitioner with existing LVM is confusing https://launchpad.net/bugs/85405 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 67882] Re: can not enter Chinese in scribus and lyx.
I can confirm the problem with scribus-ng (1.3.3.4). If I enter Chinese with SCIM, sometimes it crashes, and it never seems to accept the Chinese. Same with scribus (1.2.4.1). If I type Chinese surrounded by English, the English shows up, but not the Chinese. However, if I load a text file into the Story Editor (utf-8), it seems to work fine. Also, if I copy it from gedit and paste it into the Story Editor, it works as well. I suspect it is the way SCIM is inputting characters into the qt framework. Scribus complains: "WARNING: please edit ~/.scim/global and change /DefaultConfigModule to kconfig" A work-around would be to type into gedit and paste into the scribus StoryEditor, or save as a text file and load them into the StoryEditor. Regarding abiword - it seems to be because Abiword doesn't do font substitution. Highlight those circles and choose a font that contains Chinese characters and it will work fine. This is not really a bug. There are times I don't want font substitution. Openoffice.org also supports Chinese. Thirdly, regarding lyx - I don't even know if it supports unicode. If you need TeX quality typesetting, a good flavor that supports Unicode and TrueType fonts (sorry, no GUI) is XeTeX which supports Chinese, and even vertical typesetting with vertical font metrics. Search for XeTeX for Linux. The bug with scribus, however, still stands. -- can not enter Chinese in scribus and lyx. https://launchpad.net/bugs/67882 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs