[Bug 69066] Edgy installation misdiagnoses Shuttle SB61G2V4 as a tablet PC (wacom)
Public bug reported: Specs: FORM FACTORFRONT PANEL • Shuttle Form Factor • (2) USB ports • Shuttle G2 Chassis • (1) Mini FireWire 400 port • (1) Mic-In, Speaker-Out, Line-in PROCESSOR • (1) Power button • Intel Pentium® 4, Celeron® D socket • (1) Reset button 478 processors. 533/800MHz FSB BACK PANEL CHIPSETS • (1) VGA port • North Bridge: Intel 865G • (1) Serial port • South Bridge: Intel ICH5 • (1) FireWire 400 port • (4) USB 2.0 ports MEMORY • (1) RJ45 Ethernet port • (2) 184pin dual-channel DDR • (1) AGP slot 266/333/400• (1) PCI slot SDRAM • (1) PS/2 Keyboard port • Maximum up to 1GB per DIMM • (1) PS/2 Mouse port • (1) Fiber SPDIF_In connector VGA• (1) Fiber SPDIF_Out connector • On Board VGA : Intel Extreme • 5.1 Analog Audio connectors Graphics II • Support AGP 4x/8xEXTENSION BAY • (1) 3.5” bay AUDIO • (1) 3.5” bay (Hidden) • 5.1 channel AC97 audio • (1) 5.25” bay • Digital SPDIF I/O DIMENSION FAST ETHERNET • 300(L) x 200(W) x 185(H) mm • Fast 10/100 Ethernet • Supports Wake-On-LAN functionPOWER • 250W active PFC IEEE1394 • Input: 110 / 240V AC • VIA VT6307 • EMI Certified: FCC, CE, BSMI • Support 400Mb/s,200Mb/s, and 100Mb/s • Safety Certified: UL, TUV, CB data transfer rate • Power Cord: Depends on specific region demand ONBOARD CONNECTORS • (2) ATA100 IDE headers ACCESSORIES • (2) SATA 150 headers • (1) Shuttle ICE Thermal Module • (1) Floppy connector • (1) FDD Cable • (1) CD_in header • (1) HDD Cable • (1) SPDIF In/Out header • (1) Power Cord • (1) IR header• (1) Driver CD • (2) 1x5 USB 2.0 headers • (1) Mainboard Manual • (1) Printer port header • (1) Installation Guide • (1) Shuttle Extras CD Using a command-line login, I remedied this boo-boo by deleting all the generated wacom entries from xorg.conf. Note that the i910 video chipset and Sony monitor sync characteristics were probed correctly (yay!). ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed ** Description changed: Specs: + FORM FACTORFRONT PANEL • Shuttle Form Factor • (2) USB ports • Shuttle G2 Chassis • (1) Mini FireWire 400 port • (1) Mic-In, Speaker-Out, Line-in PROCESSOR • (1) Power button • Intel Pentium® 4, Celeron® D socket • (1) Reset button 478 processors. 533/800MHz FSB BACK PANEL CHIPSETS • (1) VGA port • North Bridge: Intel 865G • (1) Serial port • South Bridge: Intel ICH5 • (1) FireWire 400 port • (4) USB 2.0 ports MEMORY • (1) RJ45 Ethernet port • (2) 184pin dual-channel DDR • (1) AGP slot 266/333/400• (1) PCI slot SDRAM • (1) PS/2 Keyboard port • Maximum up to 1GB per DIMM • (1) PS/2 Mouse port • (1) Fiber SPDIF_In connector VGA• (1) Fiber SPDIF_Out connector • On Board VGA : Intel Extreme • 5.1 Analog Audio connectors Graphics II • Support AGP 4x/8xEXTENSION BAY • (1) 3.5” bay AUDIO • (1) 3.5” bay (Hidden) • 5.1 channel AC97 audio • (1) 5.25” bay • Digital SPDIF I/O DIMENSION FAST ETHERNET • 300(L) x 200(W) x 185(H) mm • Fast 10/100 Ethernet • Supports Wake-On-LAN functionPOWER • 250W active PFC IEEE1394 • Input: 110 / 240V AC • VIA VT6307 • EMI Certified: FCC, CE, BSMI • Support 400Mb/s,200Mb/s, and 100Mb/s • Safety Certified: UL, TUV, CB data transfer rate • Power Cord: Depends on specific region
[Bug 54246] Re: DMRAID stopped to work in kernels 2.6.15
If you want to get more information during boot, to troubleshoot why it hangs for a few minutes or any other issue, when grub comes up edit the grub command and remove the quiet and splash options from the end. In fact, remove the splash option first and see if you can see your error message, removing quiet floods the screen with boot messages and the error might get lost. -- DMRAID stopped to work in kernels 2.6.15 https://launchpad.net/bugs/54246 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39315] Re: Keyboard random repeat and dropped key presses
Even after a complete re-install of Edgy, I still get this problem on my Thinkpad R60e. :-( Still using the single processor kernel for now. -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50868] Re: gnome-power-manager does not hibernate when battery is critical
You could try changing the value of /apps/gnome-power- manager/use_time_for_policy but I don't know if that key will exist in 2.14 -- gnome-power-manager does not hibernate when battery is critical https://launchpad.net/bugs/50868 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42775] Re: swscanner tries to use kdesu, which is not installed
Edubuntu 6.10 - Confirmed Could not launch menu item Failed to execute child process kdesu (No such file or directory) kdebase-bin install fixes the issue - needs to set kdebase-bin as a dep ** Changed in: swscanner (Ubuntu) Importance: Medium = Low Status: Unconfirmed = Confirmed -- swscanner tries to use kdesu, which is not installed https://launchpad.net/bugs/42775 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42773] Re: multiple icons in the applications menu
*** This bug is a duplicate of bug 42775 *** the same info is in bug 42775, must have been an accidental double post ** Changed in: swscanner (Ubuntu) Status: Unconfirmed = Rejected -- multiple icons in the applications menu https://launchpad.net/bugs/42773 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42773] Re: multiple icons in the applications menu
*** This bug is a duplicate of bug 42775 *** i am the bug here, sorry for the reject, but reading the title, i realised this wasn't a duplicate bug either. Thank you bug mailing list for catching this. I can confirm this, as it has SWScanner and SWScanner as Root The SWScanner as Root is what causes bug 42775, which this bug was originally marked a duplicate of by someone else. ** Changed in: swscanner (Ubuntu) Importance: Medium = Low Status: Rejected = Confirmed -- multiple icons in the applications menu https://launchpad.net/bugs/42773 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 54246] Re: DMRAID stopped to work in kernels 2.6.15
Good find, this sounds like a bug that should be filed against LVM. -- DMRAID stopped to work in kernels 2.6.15 https://launchpad.net/bugs/54246 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69341] Re: sylpheed-claws-gtk2: Crashes while doing nothing.
** Attachment added: File auto-generated after the crash. http://librarian.launchpad.net/4940988/_usr_bin_sylpheed-claws-gtk2.1000.crash -- sylpheed-claws-gtk2: Crashes while doing nothing. https://launchpad.net/bugs/69341 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69341] sylpheed-claws-gtk2: Crashes while doing nothing.
Public bug reported: Run sylpheed-claws-gtk2 and let it sit around, checking for mail every 10 minutes. After about 30 minutes it crashes. ** Affects: sylpheed-claws-gtk2 (Ubuntu) Importance: Undecided Status: Unconfirmed -- sylpheed-claws-gtk2: Crashes while doing nothing. https://launchpad.net/bugs/69341 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68240] Re: I can't import list of gadu-gadu
(18:38:27) CIA-14: boler * r17632 /trunk/libgaim/protocols/gg/buddylist.c: Fixes https://launchpad.net/bugs/68240 (I can't import list of gadu-gadu). ** Changed in: gaim (Ubuntu) Status: Needs Info = Fix Committed -- I can't import list of gadu-gadu https://launchpad.net/bugs/68240 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69383] Re: Key can_suspend_to_ram missing
The gconf can_suspend_to_* keys are dead - only can_hibernate and can_suspend should exist in 2.16.x and 2.17.x releases. The message you are refering to come from: /** * gpm_hal_can_suspend: * * @hal: This hal class instance * Return value: TRUE if kernel suspend support is compiled in * * Finds out if HAL indicates that we can suspend **/ gboolean gpm_hal_can_suspend (GpmHal *hal) { gboolean exists; gboolean can_suspend; g_return_val_if_fail (GPM_IS_HAL (hal), FALSE); /* TODO: Change to can_suspend when rely on newer HAL */ exists = gpm_hal_device_get_bool (hal, HAL_ROOT_COMPUTER, power_management.can_suspend_to_ram, can_suspend); if (exists == FALSE) { gpm_warning (gpm_hal_can_suspend: Key can_suspend_to_ram missing); return FALSE; } return can_suspend; } power_management.can_suspend_to_ram is depreciated, but still provided by HAL. What is the output of lshal | grep can Thanks. Richard. -- Key can_suspend_to_ram missing https://launchpad.net/bugs/69383 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68786] Re: I see dead people (aka talk with people which appears offline on msn) doesn't work anymore on gaim
Windows Live Messenger is not a valid test case (if we're talking about a bug). It uses a newer version of the protocol. Really, this is effectively a wishlist request for MSNP14 support, which is being worked on. -- I see dead people (aka talk with people which appears offline on msn) doesn't work anymore on gaim https://launchpad.net/bugs/68786 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69531] Re: ImageMagick Font Issues
Perhaps this package should be using Defoma: Defoma, which stands for DEbian FOnt MAnager, provides a framework for automatic font configuration. An application whose configuration of fonts usually requires manual intervention can automate the process through Defoma, by installing a Defoma-configuration script. The script gets called whenever a font is installed and removed, so that the script may update the application configuration. -- ImageMagick Font Issues https://launchpad.net/bugs/69531 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 67586] Re: default homepage nonexistant
This isn't a Kubuntu docs issue either I don't believe, but this should fix your problem: At the command line (terminal, console) type: sudo update-alternatives --config firefox-homepage enter your password Select the option that looks like: /usr/share/ubuntu-artwork/home/firefox-index.html In my case it is option 1, so I would type 1 and press enter. If it is option 2 for you, then select 2 and press enter. You want the firefox- index.html selected. I think this is due to borkage from upgrading from Breezy to Dapper to Edgy. Possibly locations and/or filenames changed during these times and didn't upgraded correctly. ** Changed in: kubuntu-docs (Ubuntu) Importance: Undecided = Low Status: Unconfirmed = Needs Info -- default homepage nonexistant https://launchpad.net/bugs/67586 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 22474] Re: gparted does not like /dev/mapper devices
** Bug watch added: GNOME Bug Tracker #317262 http://bugzilla.gnome.org/show_bug.cgi?id=317262 ** Also affects: gparted (upstream) via http://bugzilla.gnome.org/show_bug.cgi?id=317262 Importance: Unknown Status: Unknown -- gparted does not like /dev/mapper devices https://launchpad.net/bugs/22474 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 67606] Re: dmraid is initialized before udev
In addition to the scripts in the initramfs dmraid's initialization is switched. It did affect me hence the reason for opening the bug. You can see my comment in the main bug about it. If you want to test it out you can remove /etc/rcS.d/S11dmraid from your system and see if everything works fine. NB: I wasn't booting into the raid, I booted into hda but I had other partitions I wanted to access post boot that were on raid, but before my update (moving dmraid from S03 to S11) I could not access them without running dmraid -ay maunally. - Richard On 10/31/06, Phillip Susi [EMAIL PROTECTED] wrote: Yes, I have confirmed that our dmraid package differs from debian's by setting up dmraid in the initramfs. The rc scripts just run it for a second time which should have no effect, though it is redundant. If you just echoed this bug from debian BTS, please cancel/reject it as it doesn't apply to Ubuntu. -- dmraid is initialized before udev https://launchpad.net/bugs/67606 -- Look at their players from big clubs like Juventus and Arsenal and Anderlecht, look at ours from San Juan Jabloteh and New England Revolution...and look what we did. This is the beauty of our game. Coach Leo Beenhakker - after TnT's draw against Sweden -- dmraid is initialized before udev https://launchpad.net/bugs/67606 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 67606] Re: dmraid is initialized before udev
This is a separate issue from bug #54246. The rc13 package attached to bug #54246 fixes both that bug and this one, take a look at the debian/changelog ** This bug is no longer a duplicate of bug 54246 DMRAID stopped to work in kernels 2.6.15 ** Summary changed: - dmraid is initialized before udev + dmraid's init script runs before udev in rcS -- dmraid's init script runs before udev in rcS https://launchpad.net/bugs/67606 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50868] Re: gnome-power-manager does not hibernate when battery is critical
So untick it and everything should work. It appears your time remaining calculation may be wrong. -- gnome-power-manager does not hibernate when battery is critical https://launchpad.net/bugs/50868 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 67606] Re: dmraid is initialized before udev
Yeah I packaged up rc13 and just fixed the two issues at once. I'd like to leave the two bugs open though, just in case my package doesn't get uploaded. Are you subscribed to the ubuntu-motu list? It's helpful, at least to see administrative issues of how motu is run in Ubuntu, because no one could tell me how I can get my rc13 package uploaded, so they're finally working out a process. On 10/31/06, Phillip Susi [EMAIL PROTECTED] wrote: Yes, but since the fix attached to that bug also fixes this one, I figured they should be attached. -- dmraid's init script runs before udev in rcS https://launchpad.net/bugs/67606 -- Look at their players from big clubs like Juventus and Arsenal and Anderlecht, look at ours from San Juan Jabloteh and New England Revolution...and look what we did. This is the beauty of our game. Coach Leo Beenhakker - after TnT's draw against Sweden -- dmraid's init script runs before udev in rcS https://launchpad.net/bugs/67606 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69531] Re: ImageMagick Font Issues
** Bug watch added: Debian Bug tracker #396420 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=396420 ** Also affects: Debian via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=396420 Importance: Unknown Status: Unknown -- ImageMagick Font Issues https://launchpad.net/bugs/69531 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69613] Re: if you select some text and copy it then close firefox
I don't know if this is a bug or not, but I experience this same issue and it is rather annoying. https://bugzilla.mozilla.org/show_bug.cgi?id=311340 ** Changed in: firefox (Ubuntu) Importance: Undecided = Low Status: Unconfirmed = Confirmed ** Bug watch added: Mozilla Bugzilla #311340 https://bugzilla.mozilla.org/show_bug.cgi?id=311340 ** Also affects: firefox (upstream) via https://bugzilla.mozilla.org/show_bug.cgi?id=311340 Importance: Unknown Status: Unknown -- if you select some text and copy it then close firefox https://launchpad.net/bugs/69613 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69612] Re: view info crash
I just tried it with Edgy, using Firefox 2.0 and it worked. Tested with both Ubuntu and Kubuntu. I cannot confirm. Anyone else? ** Changed in: firefox (Ubuntu) Importance: Undecided = Low Status: Unconfirmed = Needs Info -- view info crash https://launchpad.net/bugs/69612 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68543] Re: gaim - Hebrew contact names don't appear correctly
Any chance you could test this with Gaim 2.0.0beta4? -- gaim - Hebrew contact names don't appear correctly https://launchpad.net/bugs/68543 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69531] ImageMagick Font Issues
Public bug reported: Binary package hint: libmagick9 Regarding one of our web servers, a co-worker of mine filed an internal bug with this text: ImageMagick fonts don't get properly configured -- this seems like it may be a package bug to me, though I'm not sure. Basically /usr/lib/ImageMagick-6.2.4/config/type.xml, as installed, refers to type-ghostscript.xml, which refers to fonts that are not installed (we don't have any Type 1 fonts installed). The ImageMagick examples page ( http://www.cit.gu.edu.au/~anthony/graphics/imagick6/ ) suggests using a script to enumerate fonts: http://www.cit.gu.edu.au/~anthony/graphics/imagick6/scripts/imagick_type_gen (this produces a replacement for type.xml). I did that and it seems to work fine. The proper way would probably involve having every installed font package add a file to be included in type.xml. (Well, ideally, there would be a type.d directory, I suppose :) ) Our needing to edit a configuration file which is stored in /usr/lib/ImageMagick-6.2.4/config makes me nervous. It's going to get overwritten on upgrades, since it's not a conffile, right? ** Affects: imagemagick (Ubuntu) Importance: Undecided Status: Unconfirmed -- ImageMagick Font Issues https://launchpad.net/bugs/69531 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69383] Re: Key can_suspend_to_ram missing
HAL is started, right? -- Key can_suspend_to_ram missing https://launchpad.net/bugs/69383 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 66909] Re: zd1201 wireless card firmware should be included / installed by default
This surely falls into the same licence as atmel-firmare, which I also needed to get my girlfriends laptop surfing. The firmware is not kernel specific, so perhaps this bug is better targetted at atmel-firmware. -- zd1201 wireless card firmware should be included / installed by default https://launchpad.net/bugs/66909 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39315] Re: Keyboard random repeat and dropped key presses
Alas, The 2.6.19-4-generic kernel from Feisty doesn't solve the problem for me. -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69766] adept does not display license agreement when installing sun java
Public bug reported: Binary package hint: sun-java5-bin System Kubuntu 6.10. bug also affects sun-java5-jre When attempting to install sun-java5-bin and/or sun-java5-jre using adept the install hangs at the point when it should display the license agreement for confirmation. If I press the show details button the license is visible but there is no way to select OK using either the mouse or the keyboard. The only way to resolve this is to kill adept manually. However this leaves adept in an unusable condition. I have given a work around below but adept needs to handle this more gracefully. Other people have experienced this problem as described here http://www.ubuntuforums.org/showthread.php?t=282987 Work around #manually kill adept sudo killall adept #this is necessary to get adept to work again sudo dpkg --configure -a #install java manually from the commandline. Using this method the license agreement is displayed correctly and can be confirmed so the install proceeds sudo apt-get install sun-java5-jre sudo apt-get install sun-java5-bin ** Affects: sun-java5 (Ubuntu) Importance: Undecided Status: Unconfirmed ** Description changed: Binary package hint: sun-java5-bin System Kubuntu 6.10. bug also affects sun-java5-jre When attempting to install sun-java5-bin and/or sun-java5-jre using adept the install hangs at the point when it should display the license agreement for confirmation. If I press the show details button the license is visible but there is no way to select OK using either the mouse or the keyboard. - The only way to resolve this is to kill adept manually. However this leaves adept in an unusable condition. I have given a work around below but adept needs to handle this more gracefully. + The only way to resolve this is to kill adept manually. However this leaves adept in an unusable condition. I have given a work around below but adept needs to handle this more gracefully. Other people have experienced this problem as described here. Work around #manually kill adept sudo killall adept #this is necessary to get adept to work again sudo dpkg --configure -a #install java manually from the commandline. Using this method the license agreement is displayed correctly and can be confirmed so the install proceeds sudo apt-get install sun-java5-jre sudo apt-get install sun-java5-bin ** Tags added: adept java kubuntu ** Description changed: Binary package hint: sun-java5-bin System Kubuntu 6.10. bug also affects sun-java5-jre When attempting to install sun-java5-bin and/or sun-java5-jre using adept the install hangs at the point when it should display the license agreement for confirmation. If I press the show details button the license is visible but there is no way to select OK using either the mouse or the keyboard. - The only way to resolve this is to kill adept manually. However this leaves adept in an unusable condition. I have given a work around below but adept needs to handle this more gracefully. Other people have experienced this problem as described here. + The only way to resolve this is to kill adept manually. However this leaves adept in an unusable condition. I have given a work around below but adept needs to handle this more gracefully. Other people have experienced this problem as described here + http://www.ubuntuforums.org/showthread.php?t=282987 Work around #manually kill adept sudo killall adept #this is necessary to get adept to work again sudo dpkg --configure -a #install java manually from the commandline. Using this method the license agreement is displayed correctly and can be confirmed so the install proceeds sudo apt-get install sun-java5-jre sudo apt-get install sun-java5-bin -- adept does not display license agreement when installing sun java https://launchpad.net/bugs/69766 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69766] Re: adept does not display license agreement when installing sun java
Yes, Sorry. Thanks for pointing that out -- adept does not display license agreement when installing sun java https://launchpad.net/bugs/69766 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69838] Multiple definition of 'struct sockaddr'
Public bug reported: trying to compile Maiko's JNOS2 package: www.physics.umanitoba.ca/~maiko/jnos2_fc5src.tar.gz I get the following errors on both Dapper and Edgy systems: gcc -DUNIX -g3 -DDEVELOPMENT -DDEBUG -W -Wimplicit -Wreturn-type -Wswitch -Wpointer-arith -Wcast-qual -Wcast-align -Waggregate-return -Wparentheses -I/usr/include/ncurses -DLCURSES=\-lncurses\ -c -o tun.o tun.c In file included from /usr/include/sys/socket.h:35, from /usr/include/linux/if.h:22, from tun.c:40: /usr/include/bits/socket.h:43: error: syntax error before numeric constant /usr/include/bits/socket.h:53: error: syntax error before numeric constant In file included from /usr/include/sys/socket.h:35, from /usr/include/linux/if.h:22, from tun.c:40: /usr/include/bits/socket.h:146: error: redefinition of ‘struct sockaddr’ make: *** [tun.o] Error 1 It appears these problems are in the libc6-dev header files, not his source. ** Affects: glibc (Ubuntu) Importance: Undecided Status: Unconfirmed -- Multiple definition of 'struct sockaddr' https://launchpad.net/bugs/69838 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 34233] Re: g-p-m failing to use DPMS to power off display
Meaning if lid=closed you will never get a running screensaver nor will it ever dpms. Only if lid=open it will dpms !!! Incorrect. If the lid is closed then the automatic DPMS timeout is disabled, and the lid DPMS is forced off. When the lid id re-opened, then the DPMS is turned on, and the timeout restored. It sounds like you may be suffering from an ACPI problem (or a bios or hardware problem) where the lid status is not being detected correctly. Richard. -- g-p-m failing to use DPMS to power off display https://launchpad.net/bugs/34233 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68827] Re: Moving sheet tabs results in wrong order or crash
I only saw the crash once.. and It might have been related to renaming tabs and not moving them. If I can get it to repeat i'll capture and backtrace and file a report for it. I am seeing this with the new Edgy release, not sure the version, I can look it up when I get home. I also see it with Dapper and gnumeric version 1.6.3 Steps to reproduce it on dapper. (May work with edgy too) Open gnumeric Right click on sheet 3 and append a new sheet. Right click on sheet 4 and append a new sheet. ( Repeat until 8 sheets are present and in order) Now drag sheet 8 from the end and and drop between sheets 2 and 3. The new order should be 1,2,8,3,4,5,6,7. What I get is 1,2,4,3,6,5,8,7. I can then drag sheet 8 back to the end and all the sheets flip back to their original locations, i.e. 1,2,3,4,5,6,7,8. The only way I can get the sheets in the right order is to drag and drop sheet 8 one location at a time. -- Moving sheet tabs results in wrong order or crash https://launchpad.net/bugs/68827 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 32143] Re: g-p-m reports Problem with Suspend even on success.
Should be: == Version 2.16.1 == Released September 29, 2006 General - Use the step value we computed (rather than one) to fix pressing brightness-down on the Macbook Pro. (David Zeuthen) #358067 - Remove the FIXME to fix #334212. It's breaking more laptops that it was intended to fix and also breaks my (already broken) iBook. - Also ignore DBUS_GERROR_REMOTE_EXCEPTION as this prevents the 'HAL failed to suspend' when actually it suspended fine but the bus timed out. - Fix a couple of small memory leaks where we don't free an icon name. - Don't rescan buttons every minute. #356170. - Fix hotplug add and remove of wireless mice. - Add the new battery types so we don't print a warning with newer than HAL 0.5.8.1 - Increase dep of libgnome to 2.14.0 because we are using GNOME_PARAM_GOPTION_CONTEXT, which was introduced in 2-14 (Mart Raudsepp) #355437 -- g-p-m reports Problem with Suspend even on success. https://launchpad.net/bugs/32143 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68616] Re: New gaim upstream version - 2.0.0beta4 available in Debian, please sync
I'd recommend against uploading 2.0.0beta4. There were some regressions in beta4. Some have been fixed, some will be fixed shortly (and then we'll release a beta4.1 or something), and some might take more time to be fixed properly. -- New gaim upstream version - 2.0.0beta4 available in Debian, please sync https://launchpad.net/bugs/68616 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 31978] Re: Problem with zip drive?
2006-11-02 Richard Hughes [EMAIL PROTECTED] * src/gpm-battery.c: Only add and remove batteries if sane. This uses a hashtable to keep track of what batteries we are watching and should fix #369488. Can you try CVS head please, and if that works I'll backport it to 2.16 Thanks. -- Problem with zip drive? https://launchpad.net/bugs/31978 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68616] Re: New gaim upstream version - 2.0.0beta4 available in Debian, please sync
Well, libnm-glib causing gaim to hang infinitely on startup is a bad regression. This affects Dapper, so it might cause problems for Edgy. They'd have to be careful to disable libnm support until we fix that. There are some more, Sean or Luke would know more. When we get beta5 out shortly, only the libnm problem should be left. -- New gaim upstream version - 2.0.0beta4 available in Debian, please sync https://launchpad.net/bugs/68616 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68827] Re: Moving sheet tabs results in wrong order or crash
I managed to get the edgy version to crash by just moving sheet tabs around. I followed the above procedure, and then continued to move them around randomly. After a handful of moves, gnumeric crashed. Here is the report that Ubuntu generated. FYI, edgy version is 1.7.0 ** Attachment added: crash report http://librarian.launchpad.net/4948178/_usr_bin_gnumeric.1000.crash -- Moving sheet tabs results in wrong order or crash https://launchpad.net/bugs/68827 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 65033] Re: mozilla-mplayer doesn't play videoclips in Edgy
I can confirm this with the link provided, as well as while trying to view movie trailers on imdb.com. mozilla-mplayer's status messages show Playing [URL]..., Connected, and then Stopped, with the video never starting playback. Video plays successfully in Kaffeine, however, when using the MediaPlayerConnectivity extension for Firefox to launch the player and begin playback. Kubuntu Edgy 6.10 mozilla-mplayer 3.31-1 -- mozilla-mplayer doesn't play videoclips in Edgy https://launchpad.net/bugs/65033 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70129] Re: Usability problems
If you want Crtl-Enter to send a message, you can set that from your .gtkrc-2.0 file. This is explained in the Gaim FAQ. Here's a direct link: http://gaim.sourceforge.net/faq2.php#q20 -- Usability problems https://launchpad.net/bugs/70129 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70145] Nautilus integration with seahorse results in crash
Public bug reported: Trying to sign files using the nautilus context menu results in and error or crash. When trying to sign a file with the 'Sign' menu option results in an error. When encrypting a file with the 'Encrypt...' menu option and also self signing the file, results in a crash. 'Sign' Menu Option I right click on a file and select 'Sign' Seahorse pops open a dialog so I can select who to sign as. After I select the key and click OK, I get an error dialog 'Couldn't load keys', 'End of file'. I expect a prompt to enter my passphrase. 'Encrypt...' Menu Option I right click on a file and select 'Encrypt...' Seahorse pops open a dialog so I can select who to encrypt for. I select the recipients, and also select to sign the message too. When I then click OK I get bug buddy telling me seahorse has crashed. Note, If I don't try to sign the message when I encrypt it, it works fine. Appears to be related to the signing part of seahorse. ** Affects: seahorse (Ubuntu) Importance: Undecided Status: Unconfirmed -- Nautilus integration with seahorse results in crash https://launchpad.net/bugs/70145 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70145] Re: Nautilus integration with seahorse results in crash
** Attachment added: seahorse_tool backtrace http://librarian.launchpad.net/4961549/seahorse_backtrace.txt -- Nautilus integration with seahorse results in crash https://launchpad.net/bugs/70145 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70145] Re: Nautilus integration with seahorse results in crash
After a little more digging, it appears to be /usr/bin/seahorse-tool that is broke. I can call it directly from the command like and get the same behavior as described above. -- Nautilus integration with seahorse results in crash https://launchpad.net/bugs/70145 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61986] Re: tango icon set
Regarding the first, it's very important that you not replace the about box logo with something that says GAIM. The program is always to be referred to as Gaim or gaim, as outlined in the FAQ. Gaim 2.0.0 has a number of icons from lokheed's previous icon theme. Regarding the specific icons... The Gaim developers are split on the clock vs. notepad icon for away. I don't think it's a good idea to replace the generic Jabber icon with an icon clearly based on the Google Talk icon. The Yahoo icon is even less recognizable than the current one we have in Gaim. I don't like the replacement of the Gaim dude icons wholesale. The status ones incorporate the icon for a web browser, which is really confusing. The dialog ones are nice, but the Gaim Cool icon has been replaced with something that indicates a clear lack of understanding about what that icon is used for. I really with the creator of these icons would've brought them to us for inclusion upstream, but he didn't. I found a previous version from a user's suggestion. As I mentioned, I included many of them upstream. However, the creator of those icons wasn't willing to work with us on changing some icons to meet the developers' requirements. To be fair, I rejected some of them right away without providing reasons (which I intended on getting to later) which set a bad tone. I could detail more issues, which are not as critical, but it's really late here... Regarding the second set... I like some of those better, but I'm not going to detail it. All in all, if you feel there are specific icons in these themes that are better than those in Gaim 2.0.0 now, I'd be willing to look at including them upstream, which seems like a far better thing for everyone involved. I'd really rather not see Ubuntu with different icons (unless their entire desktop theme were to vary a lot from the respective upstream projects). It increases the support costs on both sides, and deprives Gaim users on other distros of nicer icons. -- tango icon set https://launchpad.net/bugs/61986 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62050] [Kubuntu Edgy] KDM X Do Not Start Automatically
Public bug reported: This could either be a duplicate of bug 59242, or very similar. I didn't want to hijack that bug and it not be the same thing, plus that bug didn't have enough info. When booting, after all updates as of 2006-09-23 16:30 UTC, KDM and X do not start automatically. It will boot, get past the usplash, and then just present a blank (black) screen. I am able to press 'alt+f1' and get to term to login. Once logged in, StartX crashes saying that it is already running. However, if I do 'sudo /etc/init.d/kdm restart' it starts up just fine. I will attach Xorg.0.log and kdm.log for you to view. If there are any other things you can recommend, please do so. Thanks Log files to follow ** Affects: kdebase (Ubuntu) Importance: Untriaged Status: Unconfirmed -- [Kubuntu Edgy] KDM X Do Not Start Automatically https://launchpad.net/bugs/62050 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 62050] Re: [Kubuntu Edgy] KDM X Do Not Start Automatically
(**) RADEON(0): RADEONSaveScreen(1) (**) RADEON(0): RADEONDisplayPowerManagementSet(0,0x0) SetGrabKeysState - enabled X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.15.7 i686 Current Operating System: Linux MasTequila 2.6.17-9-386 #2 Fri Sep 22 10:38:16 UTC 2006 i686 Build Date: 07 July 2006 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Sat Sep 23 10:12:10 2006 (==) Using config file: /etc/X11/xorg.conf (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (**) RADEON(0): RADEONPreInit (**) RADEON(0): RADEONScreenInit d000 0 (**) RADEON(0): Map: 0xd000, 0x0800 (**) RADEON(0): RADEONSave (**) RADEON(0): RADEONSaveMode(0x81fcd38) (**) RADEON(0): Read: 0x003c 0x00030065 0x (**) RADEON(0): Read: rd=12, fd=101, pd=3 (**) RADEON(0): RADEONSaveMode returns 0x81fcd38 (**) RADEON(0): DRI New memory map param (**) RADEON(0): RADEONInitMemoryMap() : (**) RADEON(0): mem_size : 0x0800 (**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 (**) RADEON(0): MC_AGP_LOCATION : 0xffc0 (**) RADEON(0): RADEONModeInit() 1792x1344 204.80 1792 1920 2120 2448 1344 1345 1348 1394 (24,32) -H +V 1792x1344 204.80 1792 1920 2120 2448 1344 1345 1348 1394 (24,32) -H +V (**) RADEON(0): Pitch = 14680288 bytes (virtualX = 1792, displayWidth = 1792) (**) RADEON(0): dc=20480, of=20480, fd=91, pd=1 (**) RADEON(0): RADEONInit returns 0x81fd6e8 (**) RADEON(0): RADEONRestoreMode() (**) RADEON(0): RADEONRestoreMode(0x81fd6e8) (**) RADEON(0): RADEONRestoreMemMapRegisters() : (**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 (**) RADEON(0): MC_AGP_LOCATION : 0xffc0 (**) RADEON(0): Map Changed ! Applying ... (**) RADEON(0): Map applied, resetting engine ... (**) RADEON(0): Updating display base addresses... (**) RADEON(0): Memory map updated. (**) RADEON(0): Programming CRTC1, offset: 0x (**) RADEON(0): Wrote: 0x000c 0x005b 0x (0xa400) (**) RADEON(0): Wrote: rd=12, fd=91, pd=0 (**) RADEON(0): GRPH_BUFFER_CNTL from 20204c4c to 20377c7c (**) RADEON(0): RADEONSaveScreen(0) (**) RADEON(0): Setting up initial surfaces (**) RADEON(0): Initializing fb layer (**) RADEON(0): Setting up accel memmap (**) RADEON(0): Initializing backing store (**) RADEON(0): DRI Finishing init ! (**) RADEON(0): EngineRestore (32/32) (**) RADEON(0): GRPH_BUFFER_CNTL from 20204c4c to 20377c7c (**) RADEON(0): Setting up final surfaces (**) RADEON(0): Initializing Acceleration (**) RADEON(0): EngineInit (32/32) (**) RADEON(0): Pitch for acceleration = 224 (**) RADEON(0): EngineRestore (32/32) (**) RADEON(0): Initializing DPMS (**) RADEON(0): Initializing Cursor (**) RADEON(0): Initializing color map (**) RADEON(0): Initializing DGA (**) RADEON(0): Initializing Xv (**) RADEON(0): RADEONScreenInit finished error opening security policy file /usr/lib/xserver/SecurityPolicy xkb_keycodes { include xfree86+aliases(qwerty) }; xkb_types{ include complete }; xkb_compatibility{ include complete }; xkb_symbols { include pc(pc104)+us }; xkb_geometry { include pc(pc104) }; (EE) xf86OpenSerial: Cannot open device /dev/wacom No such file or directory. Error opening /dev/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/wacom No such file or directory. Error opening /dev/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/wacom No such file or directory. Error opening /dev/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/wacom No such file or directory. Error opening /dev/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/wacom No such file or directory. Error opening /dev/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/wacom No such file or directory. Error opening /dev/wacom : Success Could not init font path element /usr/share/fonts/X11/TTF/, removing from list! Could not init font path element /usr/share/fonts/X11/OTF, removing from list! Could not init font path element /usr/share/fonts/X11/CID/, removing from list! (**) RADEON(0): RADEONSaveScreen(2) (**) RADEON(0): RADEONCloseScreen (**) RADEON(0): RADEONDRIStop (**) RADEON(0): EngineRestore (32/32) (**) RADEON(0): RADEONDisplayPowerManagementSet(0,0x0) (**) RADEON(0): RADEONRestore (**) RADEON(0): RADEONRestoreMode() (**) RADEON(0): RADEONRestoreMode(0x81fcd38) (**) RADEON(0): RADEONRestoreMemMapRegisters() : (**) RADEON(0): MC_FB_LOCATION : 0x1fff (**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000 (**) RADEON(0): Map
[Bug 58382] Similar problems on a Powerbook G3, x-session-manager hangs
I see problems that are very similar to what is described here on a Powerbook G3 that has been dist-upgraded from breezy to dapper. In a low, but important percentage of cases, launching applications after a wakeup from standby fails. Restarting Gnome restores a working condition. I can't confirm points 4-6, but here I see an occasional message bubble from the gnome-power icon that standby failed (or so). Anticipating it to happen again, I left a terminal open and tried to trace an application from the terminal (gaim, in this case). We see one icon file being accessed and then it tries do do a connection to what seems to be another process - blocking forever: munmap(0x30024000, 4096)= 0 open(/usr/share/pixmaps/gaim/icons/online.png, O_RDONLY|O_LARGEFILE) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=3671, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x30024000 read(4, \211PNG\r\n\32\n\0\0\0\rIHDR\0\0\\0\0\\10\6\0\0..., 4096) = 3671 _llseek(4, 0, [0], SEEK_SET)= 0 read(4, \211PNG\r\n\32\n\0\0\0\rIHDR\0\0\\0\0\\10\6\0\0..., 4096) = 3671 brk(0x10223000) = 0x10223000 brk(0x1021b000) = 0x1021b000 close(4)= 0 munmap(0x30024000, 4096)= 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 uname({sys=Linux, node=pbg3, ...}) = 0 connect(4, {sa_family=AF_FILE, path=/tmp/.ICE-unix/4361}, 21) = 0 fcntl64(4, F_SETFD, FD_CLOEXEC) = 0 write(4, \0\1\1\0\0\0\0\0, 8) = 8 read(4, With this read blocking, I had a look what process 4361 might be, and it was x-session-manager: 4350 tty6 Ss+0:00 /sbin/getty 38400 tty6 4361 ?Ss 0:05 x-session-manager 4409 ?Ss 0:00 /usr/bin/ssh-agent ... So my particular instance of this problem seems to be x-session-manager becoming unresponsive. -- Restore from Suspend creates problems https://launchpad.net/bugs/58382 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 59358] Re: gaim2.0b3 crashes when contacts sorted by log size
For the record, if the log files are corrupt, we still shouldn't crash. However, given the way the code works, nothing even looks at the contents of the log files to determine their size. It's obtained from a stat() call. So, getting a backtrace is the most useful next step here. -- gaim2.0b3 crashes when contacts sorted by log size https://launchpad.net/bugs/59358 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39640] Re: [2.0beta3] gaim: status pulldown menu is half empty (drawn offscreen)
Jeff, you really need to take this up with the GTK+ folks. -- [2.0beta3] gaim: status pulldown menu is half empty (drawn offscreen) https://launchpad.net/bugs/39640 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 49221] Re: 58382 seems to be a duplicate of this
I've reported the issue (I see on a dist-upgraded Powerbook G3 running gnome) to another bug number yesterday, looks much like a duplicate: https://launchpad.net/distros/ubuntu/+bug/58382 -- Unable to start applications after hibernation https://launchpad.net/bugs/49221 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61578] Re: [Edgy] Wrong boot disk parameter since 2.6.17-7
I had a similar problem which I originally reported as a kernel issue. After 2.6.17-7 (8 and 9) the system would not boot with the error: Begin: Waiting for root file system My /etc/fstab shows: # /etc/fstab: static file system information. # # file system mount point type options dump pass proc/proc procdefaults0 0 # /dev/sda10 -- converted during upgrade to edgy UUID=67f18326-0ffc-4835-9de5-67d173f6ca84 / ext3 defaults,errors=remount-ro 0 1 # /dev/sda5 -- converted during upgrade to edgy UUID=2aed16dc-cfb2-49c7-b656-ae238b383997 /media/sda5 ext3 defaults 0 2 # /dev/sda6 -- converted during upgrade to edgy UUID=f8048a1c-68e7-4f26-9d6e-0e43de790488 /media/sda6 ext3 defaults 0 2 # /dev/sda7 -- converted during upgrade to edgy UUID=2f0175ef-bd42-41e2-8e32-c92a155da5ab /media/sda7 ext3 defaults 0 2 # /dev/sda9 -- converted during upgrade to edgy UUID=2854cb27-da6e-44bd-ba7c-18879b5621e3 /media/sda9 ext3 defaults 0 2 # /dev/sdb5 -- converted during upgrade to edgy UUID=6707952b-349c-4cc4-96e4-34147b25930d /media/sdb5 ext3 defaults 0 2 # /dev/sda8 -- converted during upgrade to edgy UUID=fb837170-93eb-45bf-a8e5-6b7e8f0f4d06 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 But in /boot/grub/menu.lst the relevant boot line showed: /boot/vmlinuz-2.6.17-9-generic root=/dev/sda10 ro If I replaced this with the right root location according to /etc/fstab i.e. with /boot/vmlinuz-2.6.17-9-generic root=UUID=67f18326-0ffc-4835-9de5-67d173f6ca84 ro then the system booted without problem. It seems that in upgrading from dapper the filesystem or partition information in /etc/fstab has been changed but this change has not been reflected in the grub entry. Following a suggestion by Ben Collins I removed kopt lines in /boot/grub/menu.lst and ran grub-update. This had the effect of replacing root=/dev/sda10 with root=/dev/hda1 which was veru strange and this also did not help the system boot. I think this is a major bug because I installed a standard dapper and then did a standard upgrade to edgy and the sytem did not boot. -- [Edgy] Wrong boot disk parameter since 2.6.17-7 https://launchpad.net/bugs/61578 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62223] Monitor Display, User Management, Disk Filesystems - All Broken
Public bug reported: Binary package hint: kde-systemsettings Kubuntu Edgy - latests updates as of 2006-09-24 @ 22:00 UTC I cannot open up the Display Settings via 'System Settings', 'KControl', 'Run Dialog', or 'Konsole'. I cannot open up the Disk Filesystem settings via 'System Settings', 'KControl', 'Run Dialog', or 'Konsole' I cannot open up User Management via 'System Settings', 'KControl', 'Run Dialog', however I can open it up via 'Konsole' The following posts will provide screenshots, and error messages for each issue. ** Affects: kde-systemsettings (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Affects: kde-guidance (Baltix) Importance: Untriaged Status: Unconfirmed -- Monitor Display, User Management, Disk Filesystems - All Broken https://launchpad.net/bugs/62223 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62223] Re: Monitor Display, User Management, Disk Filesystems - All Broken
Monitor Display Issue - [EMAIL PROTECTED]:~$ displayconfig Traceback (most recent call last): File /usr/bin/displayconfig, line 23, in ? import xf86misc File /usr/share/python-support/kde-guidance/xf86misc.py, line 18, in ? import ixf86misc ImportError: No module named ixf86misc --- Screenshot Attached ** Attachment added: Monitor Display Screenshot http://librarian.launchpad.net/4417834/display.png -- Monitor Display, User Management, Disk Filesystems - All Broken https://launchpad.net/bugs/62223 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 62223] Re: Monitor Display, User Management, Disk Filesystems - All Broken
Disk Filesystem Issue [EMAIL PROTECTED]:~$ mountconfig Traceback (most recent call last): File /usr/bin/mountconfig, line 37, in ? from fuser import * File /usr/share/python-support/kde-guidance/fuser.py, line 27, in ? import kdedesigner ImportError: No module named kdedesigner - Screenshot Attached ** Attachment added: Disk Filesystem Screenshot http://librarian.launchpad.net/4417835/filesystem.png -- Monitor Display, User Management, Disk Filesystems - All Broken https://launchpad.net/bugs/62223 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62223] Re: Monitor Display, User Management, Disk Filesystems - All Broken
User Management Issue Can be run via command line in Konsole. Screenshot displays 'System Settings' error. ** Attachment added: User Management Screenshot http://librarian.launchpad.net/4417836/usermgmt.png ** Also affects: kde-guidance (Baltix) Importance: Untriaged Status: Unconfirmed -- Monitor Display, User Management, Disk Filesystems - All Broken https://launchpad.net/bugs/62223 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 62256] Re: Fonts on menus are antialiased differently from other programs
I can confirm this on an Ubuntu Edgy install (all updates). However, this is not an issue on Kubuntu Edgy. ** Changed in: openoffice.org (Ubuntu) Status: Unconfirmed = Confirmed ** Changed in: openoffice.org (Ubuntu) Importance: Untriaged = Low -- Fonts on menus are antialiased differently from other programs https://launchpad.net/bugs/62256 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62050] Re: [Kubuntu Edgy] KDM X Do Not Start Automatically
For what it is worth... There was a message when I did an apt-get update/upgrade and what not telling me there was a ton of packages that I didn't need anymore, and to clear them out do 'apt-get autoremove'. I did this, and it removed pretty much the entire kubuntu-desktop package. Once it was complete I did, apt-get install kubuntu-desktop, and rebooted w/o any problems. So now, I had 2 issues fixed with the kubuntu-desktop 'reinstall'. My computer now reboots, and KDM now starts automatically. -- [Kubuntu Edgy] KDM X Do Not Start Automatically https://launchpad.net/bugs/62050 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 62050] Re: [Kubuntu Edgy] KDM X Do Not Start Automatically
im rejecting this on the grounds that it is fixed, and may have been an apt-get update/upgrade issue done previously. if you think this bug should remain open, go ahead and reopen it. ** Changed in: kdebase (Ubuntu) Status: Unconfirmed = Rejected -- [Kubuntu Edgy] KDM X Do Not Start Automatically https://launchpad.net/bugs/62050 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 60921] Re: gaim crash on msn log in
** Bug watch added: Debian Bug tracker #389398 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389398 ** Also affects: gaim (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389398 Importance: Unknown Status: Unknown -- gaim crash on msn log in https://launchpad.net/bugs/60921 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 48628] Re: gtodo.desktop: Missing Encoding Directive
I just got the latest Dapper (PPC) network update and twice saw a similar message as the update was being applied (see attached log). I was surprised to see the problem in gtodo as it didn't obviously appear to be part of the update. Further evidence: /usr/share/applications$ ls -l gtodo.desktop -rw-r--r-- 1 root root 813 2006-04-06 21:40 gtodo.desktop So, why haven't I seen this bug in the past? What would be the correct contents of the Encoding line? (It's the last line of gtodo.desktop in my case.) ** Attachment added: Software Update Manager change log http://librarian.launchpad.net/4439259/gtodo.bug -- gtodo.desktop: Missing Encoding Directive https://launchpad.net/bugs/48628 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62318] Re: No shipit for xubuntu
Very true. I myself would like to see Xubuntu disks, as I work along side the FREE GEEK crews here in the US. They refurb old computers, and we have been using Xubuntu as the OS on some of the older machines. It would be nice to present the end user of the computers we create with a nice looking, official Xubuntu disk ;) Wishlisted! ** Changed in: xubuntu-meta (Ubuntu) Importance: Untriaged = Wishlist Status: Unconfirmed = Confirmed -- No shipit for xubuntu https://launchpad.net/bugs/62318 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 58382] Re: Suspend vs. Hibernation on this issue.
*** This bug is a duplicate of bug 49221 *** This has nothing to do with hibernation! That's a whole 'nuther issue. My Powerbook has the problem when waking up from _suspend_ (RAM preserved, Power light pulsing), so from this point of view, it should be filed here. The strace output with hanging gnome-session above (x -session-manager is an alias for gnome-session) is the cause for the failure on my Powerbook - but that is about identical to the traces filed for the other bug. So it's likely that gnome-session has general problems with sleep recovery. -- Restore from Suspend creates problems https://launchpad.net/bugs/58382 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 57145] Re: [2.0beta3] Gaim let the buddy window when quit, and crash (galago ?)
You click the Distribution link near Also affects, then choose Ubuntu and type in the package name. I've added a task for gaim- galago, and I'm rejecting the Gaim one. ** Also affects: gaim-galago (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: gaim (Ubuntu) Status: Needs Info = Rejected -- [2.0beta3] Gaim let the buddy window when quit, and crash (galago ?) https://launchpad.net/bugs/57145 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 33259] Re: The module Display could not be loaded
https://launchpad.net/distros/ubuntu/+source/kde-guidance/+bug/62223 Issue is in Edgy as well. I think there is an issue when updating that may cause this. If you look, check and see if User Management and Disk File Management work. More than likely, you get the same module error. -- The module Display could not be loaded https://launchpad.net/bugs/33259 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62474] Re: Firefox Preferences dialogue broken by updates fo 20060926
I can't confirm this with Ubuntu Edgy nor Kubuntu Edgy with the latests updates/upgrades as of 16:20 UTC 2006-09-26. ** Changed in: firefox (Ubuntu) Importance: Undecided = Low Status: Unconfirmed = Needs Info -- Firefox Preferences dialogue broken by updates fo 20060926 https://launchpad.net/bugs/62474 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62477] Can't install Maple 9.5 on Knot 3
Public bug reported: I can't install Maple 9.5 on 6.10 Knot 3 (works with 6.06). I used these instructions (not knowing of their existance, but I found them when I looked for a solution of my problem): https://help.ubuntu.com/community/Maple I get these these error messages: - $ sudo sh ./installMapleLinuxSU Password: Preparing to install... Extracting the JRE from the installer archive... Unpacking the JRE... Extracting the installation resources from the installer archive... Configuring the installer for this system's environment... nawk: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory Launching installer... grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory /tmp/install.dir.6833/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory [EMAIL PROTECTED]:/media/cdrom$ - libc6, libc6-i686 are installed and the files which are not accessible are located at /lib and /usr/lib. They also appear when I do ldconfig -v. These programs (basename, dirname, hostname usw.) work when I call them directly. Do I need a compat package? What can I try else? Output of LAX_DEBUG=1, if it is helpful: - $ LAX_DEBUG=1 sudo sh ./installMapleLinuxSU Preparing to install... Checking for POSIX df. Found POSIX df. Checking tail options... Using tail -n 1. True location of the self extractor: /media/cdrom0/Linux/Disk1/InstData/VM/LinuxInstaller.bin Creating installer data directory: /tmp/install.dir.6992 Creating installer data directory: /tmp/install.dir.6992/InstallerData Gathering free-space information... Space needed to complete the self-extraction: 206334 blocks Available space: 12911432 blocks Available blocks: 12911432Needed blocks: 206334 (block = 512 bytes) Computed number of blocks to extract: 1020 Extracting the JRE from the installer archive... Extracting JRE from ./LinuxInstaller.bin to /tmp/install.dir.6992/Linux/resource/jre_padded ... Extracting done, exit code = 0 Extracting JRE from /tmp/install.dir.6992/Linux/resource/jre_padded to /tmp/install.dir.6992/Linux/resource/vm.tar.Z ... Extracting done, exit code = 0 Unpacking the JRE... Unpacking the JRE... gzip is /bin/gzip GZIP done. TAR done. Extracting the installation resources from the installer archive... Extracting install.zip from ./LinuxInstaller.bin to /tmp/install.dir.6992/InstallerData/installer.padded ... Extracting to padded done, exit code = 0 Extracting from padded to zip done, exit code = 0 Configuring the installer for this system's environment... = Analyzing UNIX Environment = Setting UNIX (linux) flavor specifics. Importing UNIX environment into LAX properties. Checking for POSIX awk. = Analyzing LAX == LAX found OK. LAX properties read.. OK. = Finding VM = Valid VM types.. J2 J1 MSJ Absolute LAX_VM path /tmp/install.dir.6992/Linux/resource/jre/bin/java Expanded Valid VM types. JRE_J2 JDK_J2 JRE_J1 JDK_J1 MSJ * Using VM.(lax.nl.current.vm).. /tmp/install.dir.6992/Linux/resource/jre/bin/java checking for NPTL + JVM vulernability... NPTL detected! checking for vulnerable JVM nawk: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory major : minor : patch : vendor: Vulnerable JVM detected... implementing workaround = Virtual Machine Options LAX properties incorporated. OK. classpath... /tmp/install.dir.6992/InstallerData:/tmp/install.dir.6992/InstallerData/installer.zip main class.. com.zerog.ia.installer.Main .lax file path.. /tmp/install.dir.6992/temp.lax user directory.. /tmp/install.dir.6992 stdout to... console sterr to console
[Bug 62477] Re: Can't install Maple 9.5 on Knot 3
That's correct, it's a Maple bug. However, Maple 9.5 worked with Ubuntu 6.06 and something relevant must have been changed. Well, let's see if I can fix this or if it works with 6.10 final; but if not, I have to use 6.06 :( And I think I don't even have support from Maplesoft for this student version. -- Can't install Maple 9.5 on Knot 3 https://launchpad.net/bugs/62477 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61755] Re: No bonjour support
To do that would require that Gaim, a package in main, build-depend on a package not in main. Ubuntu policy may not allow that. -- No bonjour support https://launchpad.net/bugs/61755 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62524] Re: Can't install a new printer
What version of Kubuntu are you using? Dapper or Edgy? I just installed the 920c here just fine on Edgy. Why are you using KControl as well? What about KMenu - System Settings? I just tried this on VMware Kubuntu Dapper (6.06.1) and selected the 920c and got the window with the 4 different versions, I always tried the 920c hpijs which is the recommended one as well. I was able to install and use the printer just fine. ** Changed in: kdebase (Ubuntu) Status: Unconfirmed = Needs Info -- Can't install a new printer https://launchpad.net/bugs/62524 -- kubuntu-bugs mailing list kubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 48628] Re: gtodo.desktop: Missing Encoding Directive
The patch file mentioned above (05_desktop-file.patch) fails to patch my gtodo.desktop file. After a little scouting around I found that my copy of gtodo.desktop is suffering from lack of a new-line character in its last line. I am attaching the patch that fixed my gtodo.desktop ** Attachment added: Patch gtodo.desktop: cures unknown encoding parse error http://librarian.launchpad.net/4518533/gtodo.desktop.patch -- gtodo.desktop: Missing Encoding Directive https://launchpad.net/bugs/48628 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 61578] Re: [Edgy] Wrong boot disk parameter since 2.6.17-7
Latest update of grub and kernel (9/27) adds what appears to be a correct kopt entry to /boot/grub/menu.lst (in my case root=UUID=67f18326-0ffc-4835-9de5-67d173f6ca84 ro) however it also adds a /hda1 entry as well which causes update-grub to produce a root=/hda1 which causes the boot to fail. If this latter kopt is removed an update-grub produces a workeable menu.lst with root=UUID=67f18326-0ffc-4835-9de5-67d173f6ca84 ro as a kernel option for the edgy kernels. I do have a ide (as well as scsi) disk on hda which must be being detected and incorrectly inserted in menu.lst (I never have a root file system attached to the ide drive). -- [Edgy] Wrong boot disk parameter since 2.6.17-7 https://launchpad.net/bugs/61578 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62709] Re: Edgy Usplash themes missing startup details.
*** This bug is a duplicate of bug 62676 *** ** This bug has been marked a duplicate of bug 62676 [edgy] splash screen on startup needs to give feedback -- Edgy Usplash themes missing startup details. https://launchpad.net/bugs/62709 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62676] Re: [edgy] splash screen on startup needs to give feedback
** Bug 62709 has been marked a duplicate of this bug -- [edgy] splash screen on startup needs to give feedback https://launchpad.net/bugs/62676 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62718] [Edgy] Current Updates (2006-09-27) Break HPLIP
Public bug reported: After updating today, 2006-09-27, HPLIP refuses to start. The following is the error message received from 'apt-get upgrade'. [EMAIL PROTECTED]:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. Do you want to continue [Y/n]? Setting up hplip (1.6.7-2ubuntu2) ... Creating/updating hplip user account... * Starting HP Linux Printing and Imaging System [fail] invoke-rc.d: initscript hplip, action start failed. dpkg: error processing hplip (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: hplip E: Sub-process /usr/bin/dpkg returned an error code (1) [EMAIL PROTECTED]:~$ - /var/logs/cups/error_log E [27/Sep/2006:11:40:41 -0500] Creating missing directory /var/run/cups/certs - ** Affects: hplip (Ubuntu) Importance: Undecided Status: Unconfirmed -- [Edgy] Current Updates (2006-09-27) Break HPLIP https://launchpad.net/bugs/62718 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62722] Re: When surfing to a webpages - redirecting
worked fine here. trying running firefox from the command line, and then check out the page, post the error here if you can. -- When surfing to a webpages - redirecting https://launchpad.net/bugs/62722 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62740] Can't safely remove USB data stick
Public bug reported: I can no longer safely remove my USB stick. I select the option but other than the bouncing icon nothing happens. I cannot pin point any particular incident / upgrade which occured before the 'safely remove' option stopped working. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Can't safely remove USB data stick https://launchpad.net/bugs/62740 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 40219] Re: Ubuntu-Server 6.06: dpkg returned an error code (1)
I'm still getting this error and in looking at the debian bug tracker it looks like it might be related to the following: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=352185 In there they release a -2 package that seems to have the fix, but ubuntu seems to be shipping with a -1build1. I'm not 100% up on how ubuntu repackages what, but I think updating this package from the debian release should fix this. -- Ubuntu-Server 6.06: dpkg returned an error code (1) https://launchpad.net/bugs/40219 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62874] Re: [Edgy] Usplash doesn't fill the whole screen
cat /etc/usplash.conf ideal is xres=1024 yres=768 if you change it, make sure you run sudo update-initramfs -u afterwards. once you have done this, do you still have a problem? ** Changed in: usplash (Ubuntu) Importance: Undecided = Low Status: Unconfirmed = Needs Info -- [Edgy] Usplash doesn't fill the whole screen https://launchpad.net/bugs/62874 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62873] Re: 6.06 (Dapper Drake) and 6.10 (Edgy Eft) will not on 300 GB HD
Does the BIOS in the current system support that large of a drive? Grub Error 18 is usually due to the drive being larger than the BIOS supports. A couple of options would be to update the BIOS and see if that helps. I know on my system, I am using the larger drives with PCI Controller cards, as w/o them I would have the same problem as you do. Do you get an error similar to: kernel (hd1,4) /bzImage root=/dev/hdb7 Error 18: Selected cylinder exceeds max supported by BIOS Another thing to look at, if possible, is setting your drive to LBA (Logical Block Addressing) in the BIOS as well. See if any of this helps out at all. Thanks for the report! ** Changed in: Ubuntu Importance: Undecided = Low Status: Unconfirmed = Needs Info -- 6.06 (Dapper Drake) and 6.10 (Edgy Eft) will not on 300 GB HD https://launchpad.net/bugs/62873 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62917] Re: Real Player will not install even with Real Players instructions.
** Summary changed: - Real Player will not install and noobs do not know how to install it even with Real Players instructions. + Real Player will not install even with Real Players instructions. -- Real Player will not install even with Real Players instructions. https://launchpad.net/bugs/62917 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62917] Re: Real Player will not install even with Real Players instructions.
Real Player installs and operates fine here. I think the solution you are seeking can be found via https://help.ubuntu.com/community/RestrictedFormats Also, you can enable universe and multiverse repositories, and 'sudo apt-get install mozilla-firefox' as that will help you out a little bit. Also if possible, re-word your bugs in the future so they follow the Ubuntu Code of Conduct (http://www.ubuntu.com/community/conduct). I know it gets frustrating at times, but no reason to take it out here. Everyone in the world is a so-called n00b as you put it, so no need to talk down people who aren't as familiar with computers just yet. Now migrating from Windows for your first time to Linux will take a massive amount of patience. For some reason a lot of people think that Linux is the same thing as Microsoft. Go over the Restricted Formats page I posted and you should be fine. Any more issues arise we will be more than happy to help. Thank you! ** Changed in: Ubuntu Importance: Undecided = Low Status: Unconfirmed = Needs Info -- Real Player will not install even with Real Players instructions. https://launchpad.net/bugs/62917 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62922] Re: Boor splash not working on Dell inspiron 6400
Ubuntu, Kubuntu, Edubuntu, or Xubuntu? I just had this same issue and fixed it? ** Changed in: Ubuntu Importance: Undecided = Low Status: Unconfirmed = Needs Info -- Boor splash not working on Dell inspiron 6400 https://launchpad.net/bugs/62922 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62922] Re: Boor splash not working on Dell inspiron 6400
Kubuntu fix via command line, and Ubuntu and the rest should be similar: ##For /usr/lib/usplash link, do sudo ln -s /etc/alternatives/usplash-artwork.so /usr/lib/usplash/usplash-artwork.so ##For /etc/alternatives usplash link do. sudo ln -s /usr/lib/usplash/usplash-theme-kubuntu.so /etc/alternatives/usplash-artwork.so ##Make sure usplash resolution is correct sudo nano /etc/usplash.conf should look like # Usplash configuration file xres=1024 yres=768 Once you have done all of that, then at the command line, do... sudo update-initramfs -u Then reboot and you should be enjoying your new usplash ;) Check the file names, as the kubuntu theme is for kubuntu and so forth ** Changed in: Ubuntu Status: Needs Info = Confirmed -- Boor splash not working on Dell inspiron 6400 https://launchpad.net/bugs/62922 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62924] Google Earth and Enemy Territory installers fail on amd64. Other programs may be affected.
Public bug reported: Hi, Installed Ubuntu Edgy Beta 1 yesterday. I am unable to install either Google Earth or Enemy Territory. Both installers are in the form of a .bin or .run file. I fear this problem may affect other installers (such as Quake 4). Both throw up fairly similar errors: [EMAIL PROTECTED]:~/Desktop$ sudo ./GoogleEarthLinux.bin Password: Verifying archive integrity... All good. Uncompressing Google Earth for GNU/Linux 4.0.2091.. ./setup.sh: 284: setup.data/bin/Linux/amd64/setup.gtk2: not found ./setup.sh: 299: setup.data/bin/Linux/amd64/setup.gtk: not found The setup program seems to have failed on amd64 Fatal error, installer failed to run at all! [EMAIL PROTECTED]:~/Desktop$ sudo /home/ribs/Incoming/et-linux-2.60.x86.run Verifying archive integrity... All good. Uncompressing Enemy Territory 2.60 Full Install.. ./setup.sh: 278: /home/ribs/.setup2350: not found ./setup.sh: 289: /home/ribs/.setup2350: not found [EMAIL PROTECTED]:~/Desktop$ Using Linux32 does not help: [EMAIL PROTECTED]:~/Desktop$ sudo linux32 /home/ribs/Incoming/et-linux-2.60.x86.run Verifying archive integrity... All good. Uncompressing Enemy Territory 2.60 Full Install.. ./setup.sh: 278: /home/ribs/.setup3029: not found ./setup.sh: 289: /home/ribs/.setup3029: not found [EMAIL PROTECTED]:~/Desktop$ As I'm running the amd64 version of Ubuntu, I feel it may be amd64 specific. I shall install the 32-bit version on a spare machine to test later on today. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Google Earth and Enemy Territory installers fail on amd64. Other programs may be affected. https://launchpad.net/bugs/62924 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 44329] Re: Tiger won't run when using varrun filesystem
David, this bug shouldn't cause that problem. -- Tiger won't run when using varrun filesystem https://launchpad.net/bugs/44329 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62974] Re: Please sync gaim-irchelper (universe) from Debian unstable (main).
For the record, Ubuntu has Gaim from the 2.0.0 line, so that'll be important to consider when syncing. -- Please sync gaim-irchelper (universe) from Debian unstable (main). https://launchpad.net/bugs/62974 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 62874] Re: [Edgy] Usplash doesn't fill the whole screen
It is good the way it is. For me, mine was 640x480, which was ugly as well on a 21 monitor. Actually maybe you could change the description if you feel like it to something like [Edgy] /etc/usplash.conf provides wrong resolution something like that ;) -- [Edgy] Usplash doesn't fill the whole screen https://launchpad.net/bugs/62874 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63053] Re: Upgrade from dapper drake to edgy beta breaks X
*** This bug is a duplicate of bug 61247 *** Note: Someone last night on #kubuntu couldn't use the Edgy LiveCD and he was using the same exact video card. Anyways, could you please post the content of: /var/log/Xorg.0.log Post it in a reply, this will help us troubleshoot the problem. Thank you for this! ** Changed in: kubuntu-default-settings (Ubuntu) Sourcepackagename: kubuntu-default-settings = xorg Status: Unconfirmed = Needs Info -- Upgrade from dapper drake to edgy beta breaks X https://launchpad.net/bugs/63053 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63042] Re: ubiquity (KDE) hangs after selecting timezone
I can confirm this, as it happened to myself and another person last night in #kubuntu while trying to get the Beta installed. ** Changed in: ubiquity (Ubuntu) Importance: Undecided = Low Status: Unconfirmed = Confirmed -- ubiquity (KDE) hangs after selecting timezone https://launchpad.net/bugs/63042 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63046] Re: Installation of Edgy Eft Beta crash
*** This bug is a duplicate of bug 61247 *** can you boot in safe mode (press escape at the Grub screen). Once you are in there, you want to type sudo dpkg-reconfigure xserver-xorg go through and answer the questions, defaults on most of these will be good. You will come to the section about your monitor. You will need to locate the horizontal and vertical refresh rates if you can, and type them in the correct area. There are times, especially with laptops, and the newer ones as well, where the refresh rates become confused and out of synch. Also if you can, get a copy of /var/log/Xorg.0.log and post it here as well. Thanks guys! ** Changed in: Ubuntu Importance: Undecided = Low Status: Unconfirmed = Confirmed -- Installation of Edgy Eft Beta crash https://launchpad.net/bugs/63046 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63063] Screen Resolution/Hz wrong
Public bug reported: edgy 6.10 beta Live CD boots to 60 Hz Refresh rate and 800 x 600 resolution. 6.06 boots to correct refresh rate 85 Hz and 1024 x 768 resolution. Device NV34 [Geforce FX5200] AGP video card is correctly recognized in 6.06 and 6.10 beta. Display is Compaq MV700. MB is Asus P4S800D-X Cannot set to higher than 60 Hz and 800 x 600 resolution. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Screen Resolution/Hz wrong https://launchpad.net/bugs/63063 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63063] Re: Screen Resolution/Hz wrong
** Attachment added: /ect/ http://librarian.launchpad.net/4558271/xorgconf -- Screen Resolution/Hz wrong https://launchpad.net/bugs/63063 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63063] Re: Screen Resolution/Hz wrong
** Attachment added: var/log/Xorg.0.log http://librarian.launchpad.net/4558269/Xorg0log -- Screen Resolution/Hz wrong https://launchpad.net/bugs/63063 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63063] Re: Screen Resolution/Hz wrong
** Attachment added: /ect/X11/xorg.conf http://librarian.launchpad.net/4558305/xorgconf ** Changed in: Ubuntu Sourcepackagename: None = xorg -- Screen Resolution/Hz wrong https://launchpad.net/bugs/63063 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63335] patches in debian/patches are not applied
Public bug reported: The patches in the libnotify package are not applied, so the bugs that they claim to fix are not actually fixed: * debian/patches/01_reopen-notification.patch: + Don't crash the daemon when showing an already closed notification bubble. Patch from upstream SVN (r2882) * debian/patches/02_fix-typo.patch: + Fix typo and notify about a change in the correct GObject property. Patch from upstream SVN (r2892) * debian/patches/03_invalid-assertion.patch: + Fix invalid assertion. Patch from upstream SVN (r2899) I guess that the right magic in debian/rules is missing. ** Affects: libnotify (Ubuntu) Importance: Undecided Status: Unconfirmed -- patches in debian/patches are not applied https://launchpad.net/bugs/63335 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 30969] Re: monitor goes to standby when playing a movie in totem fullscreen
Why do you have DPMS stuff in xorg.conf? g-p-m doesn't touch xorg.conf so that's perhaps over-writing the policy value. -- monitor goes to standby when playing a movie in totem fullscreen https://launchpad.net/bugs/30969 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 115616] Re: Device-mapper errors: dm-linear, lookup failed
Please read the thread above before commenting. evms is removed if the standard and recommended method for upgrading feisty (i.e. upgrade- manager) is used. -- Device-mapper errors: dm-linear, lookup failed https://bugs.launchpad.net/bugs/115616 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 133786] Re: Bus error when running Firefox or Epiphany
The corruption problems that I initially experienced went away until after this morning's update. I can't even boot into my system because of bus errors on the ttys. Could the libc6 update cause this? I'm not sure how to repair now. Here's the output of xfs_check: [EMAIL PROTECTED]:~# xfs_check /dev/sdb1 agi unlinked bucket 44 is 96428 in ag 7 (inode=939620524) agi unlinked bucket 50 is 96434 in ag 7 (inode=939620530) allocated inode 939620524 has 0 link count allocated inode 939620530 has 0 link count This bug is definitely beyond Firefox or Epiphany and more likely a libc6, kernel or driver problem. We could probably rule out bad hardware at this point. ** Attachment added: lspci.txt.bz2 http://launchpadlibrarian.net/10168532/lspci.txt.bz2 -- Bus error when running Firefox or Epiphany https://bugs.launchpad.net/bugs/133786 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 133786] Re: Bus error when running Firefox or Epiphany
See also https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/137179 -- Bus error when running Firefox or Epiphany https://bugs.launchpad.net/bugs/133786 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 137179] Re: 2.6.1-1ubuntu3 makes apps crash with Bus error
Today's libc6 update broke my system. I can't get to a terminal because of bus errors on the ttys. I also got filesystem corruption. I think this bug https://bugs.launchpad.net/ubuntu/+bug/133786 is related. -- 2.6.1-1ubuntu3 makes apps crash with Bus error https://bugs.launchpad.net/bugs/137179 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs