Re: [SlimDevices: Unix] Announce: piCorePlayer 3.20 Beta
I have 3.20beta5 installed and running very nicely with RIP3 WiFi. Thank you! 3.20beta5 does not work with WiFi, which is a shame because the 3.11-audio did. In both 3.11 and 3.20 96KHz files appear to play but no sound comes out. I use a Digi+ with optical output into my Caiman SEG DAC. Coax does not work either. Afterwards, no other files will play (44KHz or streaming) until I reboot PCP. The same files work fine with my SBTouch into the same DAC. Any suggestions? fsger's Profile: http://forums.slimdevices.com/member.php?userid=15977 View this thread: http://forums.slimdevices.com/showthread.php?t=107223 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.20 Beta
tbali wrote: > I installed 3.20beta5 today and everything works well here. The only > problem was that ipv6-4.9.17-pcpCore+ is missing in the repo. I think it > was one of the dependencies of git. I solved it temporary by renaming > the normal picore ipv6 package to this name. When installing git, you are getting that from the tinycore repo. Kernel modules for pCP are in the pCP Repo only, so that is 100% expected. Install the kernel modules from the pCP repo, then go get what you are trying to install. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=107223 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.20 Beta
I installed 3.20beta5 today and everything works well here. The only problem was that ipv6-4.9.17-pcpCore+ is missing in the repo. I think it was one of the dependencies of git. I solved it temporary by renaming the normal picore ipv6 package to this name. tbali's Profile: http://forums.slimdevices.com/member.php?userid=65336 View this thread: http://forums.slimdevices.com/showthread.php?t=107223 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
ralphy wrote: > Perhaps there were 2 copies of squeezelite running? I've never seen > that before. > > I've attached a tar file with a pcp-squeezelite.tcz for pcp 3.20beta > with the first stutter.patch.txt applied, version is v1.8.6-945A. > Extract it into /mnt/mmcblk0p2/tce/optional and reboot pcp. You can > confirm you're running that version in the webgui after the reboot. > > The stutter2 patch does not fix the progress bar status problem, so it's > time to research the issue again. Ralphy, I implemented the above and pCP appears to be working normally with Jivelite. I don't think the issue with patch #2 was the result of two instances of squeezelite running. I copied my patched version of squeezelite to /mnt/mmcblk0p2/tce/ and rebooted. I had also changed the version number so I could confirm the patched version was indeed the one running. I'm going to update all of my pCP's with your updated pcp-squeezelite.tcz and run with that until the next update. I'll let you know if I encounter any further problems. Thanks again, Mike NotTheHerbie's Profile: http://forums.slimdevices.com/member.php?userid=64195 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
ralphy wrote: > The ape mac binary for armhf and amd64 are now included in the server. > Update to the latest 7.9.1 nightly build and you're good to go. > > https://github.com/Logitech/slimserver/commit/3ef3118f0f70f59e12bf52f1d05a3c00f3a13680 > > Thanks Michael. If you have a pCP lms server, the binaries are handled differently. I will need to update the binaries extension. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
NotTheHerbie wrote: > Hi Ralphy, > > The stuttering problem appears to be corrected. I do see more small > (10-20 msec) skip aheads and the occasional larger skip ahead, but I > believe with 6 pCPs sync'd throughout my home, that's to be expected. I > may try the LMS SyncOptions 3rd party plugin and set it to resync > between songs. > > I have encountered a problem with my one pCP that has the 7" RPi touch > display and is running Jivelite. After installing the patched r945 > squeezelite, running Jivelite causes squeezelite to stop. I have tried > uninstalling Jivelite and reinstalling it with the same result. Is this > related to my running pCP 3.11, with squeezelite r945? FYI, the > hardware is the original RPi 2. > > Thanks, > Mike NotTheHerbie wrote: > Ralphy, > > I just loaded a clean pCP v3.20beta5 on my RPi with the 7" touch screen > and confirmed the unpatched squeezelite r945 runs with Jivelite > running, but does not run if I install the patched version and run > Jivelite. If I stop Jivelite, the patched squeezelite will run. > > - Mike Perhaps there were 2 copies of squeezelite running? I've never seen that before. I've attached a tar file with a pcp-squeezelite.tcz for pcp 3.20beta with the first stutter.patch.txt applied, version is v1.8.6-945A. Extract it into /mnt/mmcblk0p2/tce/optional and reboot pcp. You can confirm you're running that version in the webgui after the reboot. The stutter2 patch does not fix the progress bar status problem, so it's time to research the issue again. +---+ |Filename: stutter.patch.txt| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=22454| +---+ Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
gtj wrote: > Thank you so much! > I can't wait to get home and try it! paul- wrote: > There are 64 bit binaries here > > https://sourceforge.net/projects/lmsclients/files/utility/ The ape mac binary for armhf and amd64 are now included in the server. Update to the latest 7.9.1 nightly build and you're good to go. https://github.com/Logitech/slimserver/commit/3ef3118f0f70f59e12bf52f1d05a3c00f3a13680 Thanks Michael. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
rtaxerxes wrote: > I saw this wifi dongle, the TP-LINK TL-WN823N, was supposed to work with > PiCorePlayer but it doesn't seem to... > > Dmesg is showing: > > > Code: > > [3.023622] usb 1-1.4: New USB device found, idVendor=2357, idProduct=0109 > [3.023650] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [3.023664] usb 1-1.4: Product: 802.11n NIC > [3.023676] usb 1-1.4: Manufacturer: Realtek > [3.023688] usb 1-1.4: SerialNumber: 00e04c01 > > > > Could someone help me figure out how to get it to work? This is on a > 2014 Raspberry pi B+ v1.2. >From what I can tell, it dropped out with the 4.x kernels. That appears to need an out of tree driver. https://github.com/Mange/rtl8192eu-linux-driver Unfortunately with the stripped down OS that we use, DKMS doesn't work to build and install these drivers . They have to be compiled and manually installed. It can be done, but is quite a indepth process. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.10
I saw this wifi dongle, the TP-LINK TL-WN823N, was supposed to work with PiCorePlayer but it doesn't seem to. Under the wifi page it says: Code: Scanning.. No wifi devices found! Possible error: 1. USB wifi adapter missing - insert adapter. 2. wifi drivers and firmware missing - reboot required. Lsusb is showing: Code: Bus 001 Device 004: ID 2357:0109 Dmesg is showing: Code: [3.023622] usb 1-1.4: New USB device found, idVendor=2357, idProduct=0109 [3.023650] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [3.023664] usb 1-1.4: Product: 802.11n NIC [3.023676] usb 1-1.4: Manufacturer: Realtek [3.023688] usb 1-1.4: SerialNumber: 00e04c01 Could someone help me figure out how to get it to work? This is on a 2014 Raspberry pi B+ v1.2. rtaxerxes's Profile: http://forums.slimdevices.com/member.php?userid=66776 View this thread: http://forums.slimdevices.com/showthread.php?t=106755 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
