Re: [SlimDevices: Unix] LMS start\stop\restart
whenever I boot my Rpi3 running pCP (with Jivelite and the touch screen), radios are almost never available. Is LMS running on the same Pi? What kind of network connection are you using? The symptoms you're describing would likely happen if LMS was started before the network connection was up. Don't use wlan if you're running LMS on the device. -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Playing Bluetooth audio via piCorePlayer
LuFi wrote: > > Can you please post your config / what you changed to get this working > and pair a Phone ? Have you tried the procedure described 'here' (http://forums.slimdevices.com/showthread.php?108037-Experimental-Bluetooth-Speaker-support-in-piCorePlayer-3-22)? If yes, what exactly isn't working? SW: 'extGUI4LMS' (http://forums.slimdevices.com/showthread.php?98186-Announce-Alternative-Web-Interface-(beta)) | 'Playlist Editor' (http://forums.slimdevices.com/showthread.php?108199-Announce-LMS-Playlist-Editor) | 'Music Classification' (http://forums.slimdevices.com/showthread.php?108278-Announce-Essentia-Integration-music-classification-(moods-genres-)) | 'Similar Music' (http://forums.slimdevices.com/showthread.php?108495-Announce-LMSmusly-play-similar-music) | 'LMSlib2go' (https://www.nexus0.net/pub/sw/lmslib2go/) HowTos: 'build a self-contained LMS' (http://forums.slimdevices.com/showthread.php?99648-Howto-build-a-self-contained-LMS) | 'Ogg Opus' (http://forums.slimdevices.com/showthread.php?107011-Howto-play-Ogg-Opus-files) | 'Bluetooth/ALSA' (http://forums.slimdevices.com/showthread.php?107230-Howto-Bluetooth-streaming-to-from-LMS-(ALSA-only-no-PulseAudio)) Roland0's Profile: http://forums.slimdevices.com/member.php?userid=56808 View this thread: http://forums.slimdevices.com/showthread.php?t=108286 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] LMS start\stop\restart
whenever I boot my Rpi3 running pCP (with Jivelite and the touch screen), radios are almost never available. In order to get them, I have to restart the LMS from the web page of the pCP. After the above I can play radios from the WEB interface, but from the touch display the radio icon is not showing In order to play radios even from the touch LCD I have to QUIT the interface, then when it reload after some seconds, the radio icon appears. question 1) How and where put a command to delay the LMS autostart? or to restart it? Keep in mind that I am using the pCP + LCD touch and I want to avoid web interface question 2) same as 1) but for the LCD interface thanks. steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=108549 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] pCP and DSD native support
paul- wrote: > Not yet, but working on it for the next release, since DSD DACs are USB > connections, there have been some struggles. many thanks for the news. Any visibility for the planned date of the next release? Is there any beta to try? Thanks steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=108544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Is JiveLite possible using keyboard (USB), mouse (USB) and large display (HDMI)?
Once I was told that it exists I finally found it in Tweaks. I installed it, rebooted, and now I can control the player from the device itself. The functions are all there once I found the proper "Skin" to use. I even found how to reboot and shutdown. My gratitude to you for your help and to all the folks who worked to create this. Thank you ALL.:D Dan benDan's Profile: http://forums.slimdevices.com/member.php?userid=67621 View this thread: http://forums.slimdevices.com/showthread.php?t=108546 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > Drivers are kernel specific, but kernel 4.9.50 contains the latest > driver. Ive tested the Digione without issue. > > Is there anything in dmesg, after the card quits playing? What is the > audio source and parameters being used. You might not notice the problem with casual testing as it works much of the time. ALSA device is: hw:CARD=sndallodigione ALSA parameters: 80:4::1: Everything else is default. I had tried setting the "Close output setting" to zero, but that seemed to make the problem worse. I cannot produce the failure on demand. The next time it happens I will run dmesg to look for messages. Thanks. otter's Profile: http://forums.slimdevices.com/member.php?userid=67733 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Is JiveLite possible using keyboard (USB), mouse (USB) and large display (HDMI)?
Is JiveLite possible using keyboard (USB), mouse (USB) and large display (HDMI/VGA)? Yes. There's even a skin optimized for this use case (HDGridSkin). I know that it can be done with a 7 in touchscreen but can I use a large VGA monitor with an HDMI adaptor and a mouse and keyboard? Ok, VGA won't do HD. But the concept remains the same. -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Is JiveLite possible using keyboard (USB), mouse (USB) and large display (HDMI)?
Is JiveLite possible using keyboard (USB), mouse (USB) and large display (HDMI/VGA)? I need to control my RPi3/HiFiBerryAMP2 from the installation site (my bedroom) rather than walking to the other end of the house to start/stop/change songs etc. on my computer. Is this possible? I know that it can be done with a 7 in touchscreen but can I use a large VGA monitor with an HDMI adaptor and a mouse and keyboard? My eyesight and arthritis make it very difficult to use the little touchscreen and I already have the other parts so cheaper for me Thanks.. Dan benDan's Profile: http://forums.slimdevices.com/member.php?userid=67621 View this thread: http://forums.slimdevices.com/showthread.php?t=108546 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] pCP and DSD native support
Not yet, but working on it for the next release, since DSD DACs are USB connections, there have been some struggles. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] pCP and DSD native support
After managing DSD plugin and pCP settings, now I am able to play DSD files. My DAC correctly says that is receiving DSD over PCM (DoP). Unfortunately (do not know if it is a DAC limitation) but only DSD 2.8M and DSD 5.6M are supported in the DoP mode, since the DAC can manage DSD 11.2 just in native mode. now the question: is there any way to let pCP play DSD in native mode and not DoP? If yes, then how to? Thanks steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=108544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
