Re: [SlimDevices: Unix] picoreplayer 3.11 +waveshare 3.5 TFT + jivelite + Raspberry Pi 2B+
christi_ko wrote: > I think you refer to the following sections in the instructions: > > Code: > > dtoverlay=piscreen,speed=2400,rotate=90 > > > > I couldn't find anything up to now on which are preferable settings. > Can you guide me to a explanation or have a proposal? > > Sorry christi_ko, Yes. I have only tried one generic 3.5" TFT and they are the values that worked for mine. There are dozens of screens, many dtoverlays/drivers and parameters. Some of the dtoverlays/drivers have been submitted by the manufacturer for inclusion in RPiOS, many have not. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=107366 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] picoreplayer 3.11 +waveshare 3.5 TFT + jivelite + Raspberry Pi 2B+
Greg Erskine wrote: > Hi christi_ko, > I would suggest trying a different screen overlay and/or adjusting the > speed. > I think you refer to the following sections in the instructions: Code: dtoverlay=piscreen,speed=2400,rotate=90 I couldn't find anything up to now on which are preferable settings. Can you guide me to a explanation or have a proposal? Greg Erskine wrote: > Hi christi_ko, > Has it worked on before on earlier pCP? > I just tried it with version 8 up to now. But, your right i will try different version if it's dependent on that Christian christi_ko's Profile: http://forums.slimdevices.com/member.php?userid=71751 View this thread: http://forums.slimdevices.com/showthread.php?t=107366 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > Hi Greg, > > I'm sorry to say I don't think it does work. > > My system is now not clean installed but it does not appear there is an > output device. > > I added "dtoverlay=vc4-kms-v3d,noaudio" to config.txt in order to get > the Video output working, which it did. > > To test for you I removed the ",noaudio" from config.txt and rebooted > > I then set SL to use HDMI via Web Gui and rebooted > > after reboot SL was not running. > > I SSH'd in :- > > 35226 > > Not sure how the HDMI should show up (I've never used or been interested > in it) but I don't think its here > > Jeff Hi Jeff, On a clean pCP install (no dtoverlay=vc4-kms-v3d) the HDMI interface appears when you plug in a HDMI device and boot. Well it does using my HDMI port on my TV. In the past this has been an adequate test. We have defaulted to "b1". Now come the complications: If you unplug your HDMI device it disappears from ALSA. Makes sense but I think this behaviour changed going from pCP6 to pCP7. Some RPi's now have 2 HDMI ports, named "HDMI0" and "HDMI1". In ALSA these line up with "b1 - HDMI1" and "b2 - HDMI2". Notice 0 becomes 1 and 1 becomes 2, clever. I have found some dual RPi HDMI ports don't work. The default MMAP settings broke the audio output in some circumstances (for Headphones too) in pCP7. Should be fixed in pCP8. Then yesterday we found the separation of audio and visual. In the past if audio worked, jivelite worked. We might have just been lucky for the past 6 or 7 years with this assumption. We are just gradually working through these issues in pCP7 and pCP8. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Yeah, highly likely. For many years we have been able to have mmap default to 1. On recent builds, we have found situations where mmap has to be 0. We have been adjusting defaults. There is a chance that the upgrade process does not pick up the change. Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] picoreplayer 3.11 +waveshare 3.5 TFT + jivelite + Raspberry Pi 2B+
Hi christi_ko, I upgraded my 3.5" TFT with RPi3B yesterday to pCP8.0.0. I appears to function correctly. It has been running pCP8.0.0 betas for months. I following these instructions "'Add a 3.5 inch display' (https://docs.picoreplayer.org/projects/add-a-display/)". YMMV. I would suggest trying a different screen overlay and/or adjusting the speed. Has it worked on before on earlier pCP? regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=107366 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Boogie2005 wrote: > Hi paul, Firts Page: > > > > Does this mean I can no longer use HDMI audio? I have the pi4 with > PiCore 7 connected via HDMI to my AVR, and only listen to music via HDMI > out. I did an inplace upgrade from 7.0.1 and got no audio via HDMI. However, I set the audio back to headphones and then back to HDMI again, and it's all working again. So insitu worked fine for me, but I had to force a "reinstall" of HDMI by deselecting and reselecting it. psketch's Profile: http://forums.slimdevices.com/member.php?userid=56555 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] picoreplayer 3.11 +waveshare 3.5 TFT + jivelite + Raspberry Pi 2B+
I just installed a 3.5" TFT with my piZero. Everything worked fine according to summary given with following links: https://docs.picoreplayer.org/projects/add-a-display/ http://www.pughx2.com/picore61.html However finally the TFT is running, but got some screen / display issues. Anyone of you faced similar issues or have a proposal how to fix it. Menu is shown correctly The first picture shows how it should look like (shown only for 1s if screen changes from menu to this one) The 2nd picture is how it looks like after the first second. 3523835239 I am using the newest version of picoreplayer 8 +---+ |Filename: IMG_20210714_213119.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35239| +---+ christi_ko's Profile: http://forums.slimdevices.com/member.php?userid=71751 View this thread: http://forums.slimdevices.com/showthread.php?t=107366 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 8.0.0 - Bluetooth Discussion
Messing about with bt settings reduced my 8 setup to a shambles. So I reinstalled 7. May return to 8 later. Thanks for the help. castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=114834 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
In Situ upgrade from 7.0 without any issues. Thank you! Great piece of software! welom's Profile: http://forums.slimdevices.com/member.php?userid=13438 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Advice for new player hardware
Im running various pCP versions on various different Pis. The highest spec one is a Pi4 with a Khadas Tone Board (v1) both in decent hi spec cases which happen to match really well. The Khadas Tone Board is a USB DAC. I have another - a Pi3 - using a lower grade USB DAC. My advice would be try a USB DAC. They start at a couple of £ and go up to hundreds of £ so its easy to upgrade. In my view easier than a HAT - largely due to the fact that most require different cases. VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114838 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] piCorePlayer xpl-hub
Hi, i'm looking for a *xpl-hub* for the picoreplayer. anyone knows, maybe there is a ready solution/plugin already included in the picoreplayer LMS software? i need this for controlling my squeezeboxes beyond a KNX-system. br W. MrWichtig's Profile: http://forums.slimdevices.com/member.php?userid=57478 View this thread: http://forums.slimdevices.com/showthread.php?t=114843 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Here is the skinny By default when you select HDMI on the squeezelite page, pCP is going to prepopulate the "output" field with the device "b1" There are many cases where the default choice of B1 is not going to work, just manually select one of the others -RPI4 has "b1" and "b2" ports due to dual HDMI -When you load the vc4 driver with audio, the output "B1" and "B2" will get disabled, and your outputs are now going to be vc4-hdmi Just manually pick the output on the squeezelite page and press save. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
The repo issues sounds like a localized CDN cache issue. I'll flush the cache when I get home tonight. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Thanks for the help there Daniel, I had not looked at that problem yet. Likely a change in the kernel caused a udev change. I'll check the proper way to resolve. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Fiendish wrote: > Same problem for me too, squeezelite disabled and running LMS only on a > pi3b. > > Code: > > [ INFO ] You are currently using piCorePlayer7.0.1 > [ INFO ] Boot partition size required: 5. Boot partition size is: 131072 > [ INFO ] Space required for update and extensions: 15000k > [ OK ] Free space: 14655112k - Required space: 15000k > [ INFO ] You are downloading piCorePlayer8.0.0 > [ INFO ] PCP_DL=https://repo.picoreplayer.org/repo/13.x/armv7/tcz > [ OK ] Free space: 14655112k - Required space: 35160k > [ INFO ] Step 3A. Downloading new kernel modules: filesystems > There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. > Retrying extension filesystems-5.10.42-pcpCore-v7.tcz...in 5 seconds. > There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. > Retrying extension filesystems-5.10.42-pcpCore-v7.tcz...in 5 seconds. > There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. > Max retries reached. > > > > My other pi3b running Squeezelite updated without a problem. > > Tim I have updated the CM3 running only squeezelite, no server, update went perfect. The rPI running only LMS couldn't be updated. hellrider77's Profile: http://forums.slimdevices.com/member.php?userid=68706 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 8.0.0 - Bluetooth Discussion
a2dp is being used, the other profiles may connect, but they are not used. Try to increase the delay setting on the pCP web interface. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=114834 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 8.0.0 - Bluetooth Discussion
i have these connection messages with my Bluetooth headphones: Code: pCP Bluetooth extension build:0020 Starting BT Controller Waiting for bluetooth controller.Ready USB Bluetooth Hardware Address: 00:1A:7D:DA:71:08 Starting pCP BT Agent Powering on the BT controller Success. 01-01 01:00 CET INFO Starting pCP BT Speaker Daemon v8.0.0.001 01-01 01:00 CET INFO Resetting asound.conf. 01-01 01:00 CET INFORemoving bt_ from asound.conf 01-01 01:00 CET INFO Current contents of /usr/local/etc/pcp/pcp-bt.conf. 01-01 01:00 CET INFOAC:12:2F:4D:E3:CA#LifeQ30#1000#1 01-01 01:00 CET DEBUGPCM Devices found dbus.Dictionary({}, signature=dbus.Signature('oa{sv}')) 01-01 01:00 CET INFO Starting connection signal handlers. 07-14 18:33 CEST INFO Caught Connect signal 07-14 18:33 CEST DEBUG /org/bluealsa/hci0/dev_AC_12_2F_4D_E3_CA/a2dpsrc/sink 07-14 18:33 CEST DEBUG HCI:hci0 07-14 18:33 CEST INFOMAC:AC:12:2F:4D:E3:CA 07-14 18:33 CEST INFOTRANSPORT:a2dpsrc 07-14 18:33 CEST INFOConnected LifeQ30 07-14 18:33 CEST DEBUG pCP OUTPUT="hw:CARD=sndrpihifiberry" 07-14 18:33 CEST DEBUG LMS server IP:"" 07-14 18:33 CEST DEBUG pCP ALSAVOLUME="" 07-14 18:33 CEST DEBUG pCP Card Conf:"hifi_dac+.conf" 07-14 18:33 CEST INFOStarting squeezelite with output device: bt_LifeQ30 07-14 18:33 CEST INFOChecking for squeezelite pid:8679 07-14 18:33 CEST INFOPlayer Connected to LMS at: 192.168.178.109:9000 07-14 18:33 CEST INFOSending Play command for LifeQ30 to LMS at 192.168.178.109 07-14 18:33 CEST DEBUG Command returned: {} 07-14 18:33 CEST DEBUGOpen /dev/input/event4 for AC_12_2F_4D_E3_CA 07-14 18:33 CEST INFO Caught Connect signal 07-14 18:33 CEST DEBUG/org/bluealsa/hci0/dev_AC_12_2F_4D_E3_CA/hfpag/sink 07-14 18:33 CEST DEBUG HCI:hci0 07-14 18:33 CEST INFOMAC:AC:12:2F:4D:E3:CA 07-14 18:33 CEST INFOTRANSPORT:hfpag 07-14 18:33 CEST INFOStarting a2dp background monitor. 07-14 18:33 CEST INFO Caught Connect signal 07-14 18:33 CEST DEBUG /org/bluealsa/hci0/dev_AC_12_2F_4D_E3_CA/hfpag/source 07-14 18:33 CEST DEBUG HCI:hci0 07-14 18:33 CEST INFOMAC:AC:12:2F:4D:E3:CA 07-14 18:33 CEST INFOTRANSPORT:hfpag 07-14 18:33 CEST DEBUGPCM Devices found dbus.Dictionary({dbus.ObjectPath('/org/bluealsa/hci0/dev_AC_12_2F_4D_E3_CA/hfpag/sink'): dbus.Dictionary({dbus.String('Device'): dbus.ObjectPath('/org/bluez/hci0/dev_AC_12_2F_4D_E3_CA', variant_level=1), dbus.String('Sequence'): dbus.UInt32(0, variant_level=1), dbus.String('Transport'): dbus.String('HFP-AG', variant_level=1), dbus.String('Mode'): dbus.String('sink', variant_level=1), dbus.String('Format'): dbus.UInt16(33296, variant_level=1), dbus.String('Channels'): dbus.Byte(1, variant_level=1), dbus.String('Sampling'): dbus.UInt32(8000, variant_level=1), dbus.String('Codec'): dbus.String('CVSD', variant_level=1), dbus.String('Delay'): dbus.UInt16(10, variant_level=1), dbus.String('SoftVolume'): dbus.Boolean(False, variant_level=1), dbus.String('Volume'): dbus.UInt16(2048, variant_level=1)}, signature=dbus.Signature('sv')), dbus.ObjectPath('/org/bluealsa/hci0/dev_AC_12_2F_4D_E3_CA/hfpag/source'): dbus.Dictionary({dbus.String('De vice'): dbus.ObjectPath('/org/bluez/hci0/dev_AC_12_2F_4D_E3_CA', variant_level=1), dbus.String('Sequence'): dbus.UInt32(0, variant_level=1), dbus.String('Transport'): dbus.String('HFP-AG', variant_level=1), dbus.String('Mode'): dbus.String('source', variant_level=1), dbus.String('Format'): dbus.UInt16(33296, variant_level=1), dbus.String('Channels'): dbus.Byte(1, variant_level=1), dbus.String('Sampling'): dbus.UInt32(8000, variant_level=1), dbus.String('Codec'): dbus.String('CVSD', variant_level=1), dbus.String('Delay'): dbus.UInt16(10, variant_level=1), dbus.String('SoftVolume'): dbus.Boolean(False, variant_level=1), dbus.String('Volume'): dbus.UInt16(3840, variant_level=1)}, signature=dbus.Signature('sv')), dbus.ObjectPath('/org/bluealsa/hci0/dev_AC_12_2F_4D_E3_CA/a2dpsrc/sink'): dbus.Dictionary({dbus.String('Device'): dbus.ObjectPath('/org/bluez/hci0/dev_AC_12_2F_4D_E3_CA', variant_level=1), dbus.String('Sequence'): dbus.UInt32(0, variant_level=1), dbus.String('Transport' ): dbus.String('A2DP-source', variant_level=1), dbus.String(! 'Mode'): dbus.String('sink', variant_level=1), dbus.String('Format'): dbus.UInt16(33296, variant_level=1), dbus.String('Channels'): dbus.Byte(2, variant_level=1), dbus.String('Sampling'): dbus.UInt32(48000, variant_level=1), dbus.String('Codec'): dbus.String('AAC', variant_level=1), dbus.String('Delay'): dbus.UInt16(157, variant_level=1), dbus.String('SoftVolume'): dbus.Boolean(True, variant_level=1), dbus.String('Volume'): dbus.UInt16(32639,
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
I've just set up a fresh system with pCP 8.0.0 (no upgrade, with rpi3a+, display+jivelite, IR, RTC and LMS) and everything is working very well so far - thanks alot! Now I'm trying to configure gpio-shutdown (and shutdown-monitor) - however, grounding the corresponding GPIO only switches squeezelite to "off", but does not trigger the sytem shutdown required for LMS. Could it be that shutdown-monitor is no longer working with the new kernel? Manually starting shutdown-monitor.armhf (via ssh) gives the followin error: CANNOT OPEN /DEV/INPUT/BY-PATH/PLATFORM-SOC:SHUTDOWN_BUTTON-EVENT: NO SUCH FILE OR DIRECTORY[/B] :CONFUSED: INDEED, THERE IS NOT SUCH A DEVICE, BUT ONLY A SIMILAR FILE: [B]/DEV/INPUT/BY-PATH/PLATFORM-SOC:SHUTDOWN_BUTTON@C-EVENT After creating a symlink in /dev/input/by-path/ (sudo ln -s platform-soc\:shutdown_button@c-event platform-soc\:shutdown_button-event) shutdown-monitor.armhf was both able to start and to properly react to the GPIO event. Therfore I assume that shutdown-monitor binaries needs to be fixed. Daniel df77's Profile: http://forums.slimdevices.com/member.php?userid=71347 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Problem playing DSD audio files
Arne you able to see the squeezelite command string in Volumio? piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: 'https://www.picoreplayer.org' (https://www.picoreplayer.org/) *Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like piCorePlayer* sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237 View this thread: http://forums.slimdevices.com/showthread.php?t=114835 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Problem playing DSD audio files
paul- wrote: > Assuming the DAC plays other music, it's likely not the DAC. DSD > configuration is highly picky. I don't have my Boss2 setup at the > moment to test again. I'll put it on the list to do. I tried using Volumio with the same setup. And there it works and the sound is crystal clear! Problem is... I am not a fan of Volumio So I guess it must be some piCorePlayer parameter I am missing which I did not figure out yet. sesselmarder's Profile: http://forums.slimdevices.com/member.php?userid=71930 View this thread: http://forums.slimdevices.com/showthread.php?t=114835 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Same problem for me too, squeezelite disabled and running LMS only on a pi3b. Code: [ INFO ] You are currently using piCorePlayer7.0.1 [ INFO ] Boot partition size required: 5. Boot partition size is: 131072 [ INFO ] Space required for update and extensions: 15000k [ OK ] Free space: 14655112k - Required space: 15000k [ INFO ] You are downloading piCorePlayer8.0.0 [ INFO ] PCP_DL=https://repo.picoreplayer.org/repo/13.x/armv7/tcz [ OK ] Free space: 14655112k - Required space: 35160k [ INFO ] Step 3A. Downloading new kernel modules: filesystems There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. Retrying extension filesystems-5.10.42-pcpCore-v7.tcz...in 5 seconds. There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. Retrying extension filesystems-5.10.42-pcpCore-v7.tcz...in 5 seconds. There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. Max retries reached. My other pi3b running Squeezelite updated without a problem. Tim Fiendish's Profile: http://forums.slimdevices.com/member.php?userid=71346 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
The IEC958 device worked best for me when I used kms rather than fkms. Try all of the ones with hdmi in their name. Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Having the same problem one thing i did see when booting it says something about Audio failed to populate Eyerex's Profile: http://forums.slimdevices.com/member.php?userid=65695 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Greg Erskine wrote: > I hope so. I always test HDMI audio to my TV. > > What was missing here was Jivelite output to screen. I only tested > jivelite to 7" screen and 3.5" screen, I must not have tested jivelite > to TV during pCP8 development :confused: Hi Greg, I'm sorry to say I don't think it does work. My system is now not clean installed but it does not appear there is an output device. I added "dtoverlay=vc4-kms-v3d,noaudio" to config.txt in order to get the Video output working, which it did. To test for you I removed the ",noaudio" from config.txt and rebooted I then set SL to use HDMI via Web Gui and rebooted after reboot SL was not running. I SSH'd in :- 35226 Not sure how the HDMI should show up (I've never used or been interested in it) but I don't think its here Jeff +---+ |Filename: 2021-07-14 15_39_14-A. Jeff SqueezeBox-Pcp-Lounge.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35226| +---+ *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X=903953=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
hellrider77 wrote: > Trying to perform the update. Is this temporary? Or am I doing something > wrong? > > > Code: > > [ INFO ] You are currently using piCorePlayer7.0.1 > [ INFO ] Boot partition size required: 5. Boot partition size is: 131072 > [ INFO ] Space required for update and extensions: 15000k > [ OK ] Free space: 1117424k - Required space: 15000k > [ INFO ] You are downloading piCorePlayer8.0.0 > [ INFO ] PCP_DL=https://repo.picoreplayer.org/repo/13.x/aarch64/tcz > [ OK ] Free space: 1117424k - Required space: 22368k > [ INFO ] Step 3A. Downloading new kernel modules: filesystems > There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. > Retrying extension filesystems-5.10.42-pcpCore-v8.tcz...in 5 seconds. > There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. > Retrying extension filesystems-5.10.42-pcpCore-v8.tcz...in 5 seconds. > There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. > Max retries reached. > > > I have the same problem: [ INFO ] You are currently using piCorePlayer7.0.1 [ INFO ] Boot partition size required: 5. Boot partition size is: 131072 [ INFO ] Space required for update and extensions: 15000k [ OK ] Free space: 811648k - Required space: 15000k [ INFO ] You are downloading piCorePlayer8.0.0 [ INFO ] PCP_DL=https://repo.picoreplayer.org/repo/13.x/armv7/tcz [ OK ] Free space: 811648k - Required space: 21208k [ INFO ] Step 3A. Downloading new kernel modules: filesystems There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. Retrying extension filesystems-5.10.42-pcpCore-v7.tcz...in 5 seconds. There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. Retrying extension filesystems-5.10.42-pcpCore-v7.tcz...in 5 seconds. There was a error downloading filesystems-5.10.42-pcpCore-v7.tcz. Max retries reached. darv's Profile: http://forums.slimdevices.com/member.php?userid=63224 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Greg Erskine wrote: > Fingers crossed it is only temporary. I have been lots of upgrades today > with no errors. Well, tried to download the respective file via web browser on a windows computer in my home network, it worked. I have no idea whether it should be different in the case of pCP running on a RPi 3b+ checked my router and the firewall settings, all traffic is allowed. This machine I am trying to update only runs LMS server, and squeezelite is disabled. The file system partition size is 2000MB. Ah, an also have this 35225 +---+ |Filename: Screenshot 2021-07-14 170222.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35225| +---+ hellrider77's Profile: http://forums.slimdevices.com/member.php?userid=68706 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Getting HDMI CEC to work on pCP 7.0
Good news ... it works on pCP 8 The steps to follow are largley the same as I documented earlier in the thread - but I will write them again in the pCP 8 thread later on. Same limitations apply - mainly the only keys that are mapped are cursors 9and maybe one or two others) - but in particular not the OK/Enter. Navigating the "HD Skin" with just up/down/left/right is manageable. Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=113784 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
I did 4 "in situ" installations on 3 players and one server. No problems. Before the player update i removed the @soundcheck sKit and after update i installed it again. After the update on pCP LMS server i had to update the LMS binaries and libraries manually. IMHO pCP 8.0 sounds better, than 7.01 :) Thank you so much for this great piece of software ! :) :) :) praganj's Profile: http://forums.slimdevices.com/member.php?userid=41091 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Auto WAP
I am not talking about piCorePlayer. We are lucky that there many audio distributions to choose from. I think most of the other audio distributions are based on Raspberry Pi OS. Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Auto WAP
Hi Greg, thanks for the info. Where can I find tohse "large" distributions? I only know I can download the most recent standard version from here https://repo.picoreplayer.org/insitu/piCorePlayer8.0.0/piCorePlayer8.0.0.zip siod's Profile: http://forums.slimdevices.com/member.php?userid=71920 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
hellrider77 wrote: > Trying to perform the update. Is this temporary? Or am I doing something > wrong? > > > Code: > > [ INFO ] You are currently using piCorePlayer7.0.1 > [ INFO ] Boot partition size required: 5. Boot partition size is: 131072 > [ INFO ] Space required for update and extensions: 15000k > [ OK ] Free space: 1117424k - Required space: 15000k > [ INFO ] You are downloading piCorePlayer8.0.0 > [ INFO ] PCP_DL=https://repo.picoreplayer.org/repo/13.x/aarch64/tcz > [ OK ] Free space: 1117424k - Required space: 22368k > [ INFO ] Step 3A. Downloading new kernel modules: filesystems > There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. > Retrying extension filesystems-5.10.42-pcpCore-v8.tcz...in 5 seconds. > There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. > Retrying extension filesystems-5.10.42-pcpCore-v8.tcz...in 5 seconds. > There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. > Max retries reached. > > > Fingers crossed it is only temporary. I have been lots of upgrades today with no errors. Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
I hope so. I always test HDMI audio to my TV. What was missing here was Jivelite output to screen. I only tested jivelite to 7" screen and 3.5" screen, I must not have tested jivelite to TV during pCP8 development :confused: Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Auto WAP
hi siod, I can see what your use case is, slightly different to my initial thought. I wanted WPA to automatically activate if there was no wired ethernet and no wifi available, but we decided that the extensions required to be loaded to achieve this was to much to include in a basic distribution. So WPA was added later but it is manually activated and the above feature was not implemented. Your best option would be one of the large distributions if this feature is already available. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Jeff07971 wrote: > That worked, all fine now. > > Thanks Paul Hello just wondered are you getting audio via the HDMI ? Eyerex's Profile: http://forums.slimdevices.com/member.php?userid=65695 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Auto WAP
Greg Erskine wrote: > hi siod, > > Refer to Components > "'Wifi' > (https://docs.picoreplayer.org/components/wifi/)" > > > Code: > > Wifi AP # > We have decided not to activate a Wifi Access Point (WAP) by default. > > > > piCorePlayer is based on piCore which is a minimal Linux distribution. > We follow this philosophy. We let the user add the various components > to an initial very small distribution. > > These "little extra features" end up adding lots of dependencies, > often increasing the size of the original distribution by 30% to > 100%. > > piCorePlayer 32bit distribution contains just enough to get a basic > squeezelite player going on all Raspberry Pi's. > > Your best option would be one of the large distributions. > > regards > Greg Yes, I know I can activate WAP, but at the same time WIFI gets deactivated. So as far as I understand: I cannot use both. So when I am connected to a known WIFI everything is fine. So now I move to an unknown WIFI and I have no WIFI connection anymore, I have no chance to get into the piCore setup menu to activate WAP. So in this moment WAP should activate itself so a user can configure a new WIFI connection. I hope you understand what I want to achieve. I know I can configure multiple WIFI Networks I must know them before I move to them and Password changes must be configured each time before moving to those locations. siod's Profile: http://forums.slimdevices.com/member.php?userid=71920 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
I take a new SD Card, it works fine with HDMI Audio! Boogie2005's Profile: http://forums.slimdevices.com/member.php?userid=70722 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Trying to perform the update. Is this temporary? Or am I doing something wrong? Code: [ INFO ] You are currently using piCorePlayer7.0.1 [ INFO ] Boot partition size required: 5. Boot partition size is: 131072 [ INFO ] Space required for update and extensions: 15000k [ OK ] Free space: 1117424k - Required space: 15000k [ INFO ] You are downloading piCorePlayer8.0.0 [ INFO ] PCP_DL=https://repo.picoreplayer.org/repo/13.x/aarch64/tcz [ OK ] Free space: 1117424k - Required space: 22368k [ INFO ] Step 3A. Downloading new kernel modules: filesystems There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. Retrying extension filesystems-5.10.42-pcpCore-v8.tcz...in 5 seconds. There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. Retrying extension filesystems-5.10.42-pcpCore-v8.tcz...in 5 seconds. There was a error downloading filesystems-5.10.42-pcpCore-v8.tcz. Max retries reached. hellrider77's Profile: http://forums.slimdevices.com/member.php?userid=68706 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Auto WAP
On the other hand, if you're moving to a location with a network for which you know the SSIS and password, you can add these manually to the wpa_supplicant.conf and connection is pretty seamless. I have a portable LMS server based on pCP with details of wifi networks at three locations specified. Robert *Home: *Raspberry Pi 4/pCP7.0/LMS8.1.2/Material with files on QNAP TS-251A Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3) 2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), 1 x SqueezeAMP *Office:* LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp *Portable:* Raspberry Pi 3B/pCP7.0.1/LMS8.1.2/Material, files on Seagate portable drive, powered via power brick Grumpy Bob's Profile: http://forums.slimdevices.com/member.php?userid=41857 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
paul- wrote: > Keeping up with the HDMI stuff is getting harder and harder. > > I just tested this on a RPI2B+ rev 1.2 > > Add to config.txt > > dtoverlay=vc4-kms-v3d > > You may also need to comment out the line that says > gpu_mem=16 > > > Note this will also show a new soundcard on your system (vc4-hdmi) You > can disable this sound card by using this line instead. > dtoverlay=vc4-kms-v3d,noaudio That worked, all fine now. Thanks Paul *Want a webapp ?* Get SqueezeLite-X ! https://forums.slimdevices.com/showthread.php?108550-Announce-Squeezelite-X=903953=1#post903953 Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Boogie2005 wrote: > So you are not recommending an upgrade of the existing version. Better > to use an extra SD card for testing?I have no idea. Since there is no way to > go back to 7 from 8 it would be a safe way of doing it if you have a spare card. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
slartibartfast wrote: > The same announcement was made for pCP 7. If it works on 7 it probably > works on 8. Try burning a new card, you can always revert to pCP 7. > So you are not recommending an upgrade of the existing version. Better to use an extra SD card for testing? Boogie2005's Profile: http://forums.slimdevices.com/member.php?userid=70722 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
Paul Webster wrote: > Yes ... I just posted about it on a different thread. > See Jivelite for piCorePlayer > https://forums.slimdevices.com/showpost.php?p=1027732Thinking about it I > suspect my TV is too old to support CEC. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Auto WAP
hi siod, Refer to Components > "'Wifi' (https://docs.picoreplayer.org/components/wifi/)" Code: Wifi AP # We have decided not to activate a Wifi Access Point (WAP) by default. piCorePlayer is based on piCore which is a minimal Linux distribution. We follow this philosophy. We let the user add the various components to an initial very small distribution. These "little extra features" end up adding lots of dependencies, often increasing the size of the original distribution by 30% to 100%. piCorePlayer 32bit distribution contains just enough to get a basic squeezelite player going on all Raspberry Pi's. Your best option would be one of the large distributions. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 8.0.0
slartibartfast wrote: > I just found this and wondered if anything came of it? > https://forums.slimdevices.com/showthread.php?p=1006198 > > Sent from my Pixel 3a using Tapatalk Yes ... I just posted about it on a different thread. See Jivelite for piCorePlayer https://forums.slimdevices.com/showpost.php?p=1027732 Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=114828 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Auto WAP
Hi Guys, I´ve set up picoreplayer on my Rpi 3 and everything works fine so far. What I am missing is some kind of "auto WAP"- function: whenever I am not in my home network, how could I connect to another WIFI (without attaching a LAN cable)? I know volumio has an option to initialize a WAP whenever the initial set up WIFI is not available. I know one can set up a WAP in picoreplayer, too, but how to automatize this? siod's Profile: http://forums.slimdevices.com/member.php?userid=71920 View this thread: http://forums.slimdevices.com/showthread.php?t=114841 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
... and this is the first step towards getting CEC to work so that you can use the TV remote to control JiveLite. I haven't had a chance to try it with the released pCP 8 yet but Paul- did give me access to one of the 8.0 beta builds and I had it working there. If the weather is as bad as forecast today then I will try it out and document it properly. Meanwhile ... if anyone else wants to try then the outline of the required steps is at https://forums.slimdevices.com/showthread.php?113784-Getting-HDMI-CEC-to-work-on-pCP-7-0/page3 Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Advice for new player hardware
Hi Tastewar, I've around my old player (Raspi 2 + IQaudio HAT DAC). After upgrading to Raspi4 + Kadas I'm not using them and it just sits there collecting dust. Should you be interested send me a private. waldo's Profile: http://forums.slimdevices.com/member.php?userid=19888 View this thread: http://forums.slimdevices.com/showthread.php?t=114838 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix