Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Dutch87 wrote: > Yes, I have exactly the same behaviour. I hope this update can be fixed. > For me it's the first time to use 8.1 as well on a TV. I reinstalled PcP7 and now it is working again as it should. If someone can verify that Jivelite is working with PcP 8.1 on a HDMI TV please post how you made it work. Thanks all! Current: Windows 10 - LMS Server 8.2.0 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPi3B+ with HiFiBerry DAC+ to powered SW and 2X POLK OWM3's Kitchen - Bose Soundlink Mini II BL speaker All running piCorePlayer 8.1.0 and synchronized. Building Pi Boombox - RPi4B w/ HiFiBerry DAC+ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Dutch87 wrote: > Dear people. I'm trying to get Jivelite to work on my 1080p HDMI TV. > I'm using a Raspberry Pi 4B 4GB and installed PiCoreplayer 8.1 and the > cable is in HDMI port 1 of the Pi. > > I read up on the fora and the HDMI issues, the CEC and bitrate... It's > not getting easier with every new update/kernel if I understand > correctly. > Like even to get the 7" screen to work in for example libreelec 10 is > almost impossible and hardware deinterlaceing is still non existent on > the Pi 4. > > Now I got stuck at this issue. > > In the old day's I would place this in the command line to force 1080p > signal on the pi > hdmi_group=1 > hdmi_mode=16 > hdmi_ignore_edid=0xa580 > disable_overscan=1 > hdmi_force_hotplug=1 > hdmi_ignore_cec_init=1 > dtparam=audio=on > > It still works fortunately, but to get the Jivelie working I have to > disable the > #dtparam=audio=on > #gpu_mem=16 > > and enable > dtoverlay=vc4-kms-v3d > > Still no Jivelite. > > I read it was an issue that happened in PiCorePlayer 8.0 and it should > work now. > > I'm not sure what I missed. > Does anybody have a 1080p 60hz forced signal on the HDMI port 1 with CEC > working with PiCoreplayer 8.1 on the Pi 4 and have audio on the TV over > HDMI with Jivelite working? > If so what are the simple steps, if there are any, to achieve this? > > Big thanks!!! I just ran into this same issue except mine was working until I clicked Jivelite update in the PcP web interface. Jivelite no longer starts when I boot. The splash screen pops up briefly but then the screen goes blank. Audio via HDMI is working. I tried a fresh install of PcP 8.1 but still a no-go. Rpi3b no extra DAC Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPi3B+ with HiFiBerry DAC+ to powered SW and 2X POLK OWM3's Kitchen - Bose Soundlink Mini II BL speaker All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi4B w/ HiFiBerry DAC+ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer 6.x.x - Bluetooth
I have a Bose Soundlink Mini II BT speaker that I use in my kitchen. Normally it is paired with one of the RPiZeroW's that I have running half of my Living Room speaker systems. (Closest one) I also have it paired with my Family Room system and it will switch between connections when I move it out of range of the Living Room or press the BT pairing button on the speaker. The speaker just shows up in the LMS player list and stays synced pretty well. It works well enough to stay connected to the Family Room even when I go to the basement. Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi4B w/ HiFiBerry DAC+ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=111972 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Dual Wifi adapters
jeroen2 wrote: > Could it be a solution to setup a wifi hotspot on your phone, and have > the Pi connect to that when you're on the road? That could be a solution however I only want to connect to the Pi in order to change the local wifi connection. I do not desire to use the phone as the internet connection. Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi4B w/ HiFiBerry DAC+ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=113327 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Dual Wifi adapters
paul- wrote: > There is no automatic way to handle this in piCorePlayer. > > Hostapd is available, and what you need to run a AP on the second > adapter. You would have do manual configuring. Thanks Paul. Anyone else successful getting this to work? I installed the extension but can't find the .conf file to configure. Sorry, I only know enough Linux to be dangerous. Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi4B w/ HiFiBerry DAC+ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=113327 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Dual Wifi adapters
I have searched the threads and have not found an answer to this. System - RPi4b with DAC Hat embedded into a Sony Boombox. Headless Simply I want to use the on board Wifi (wlan0) to connect to an internet connected AP but want to use a second USB wifi adapter (wlan1) as a RPi WAP (or the reverse) so I can access the web interface when on the road to change the SSID without having to SSH or remove the SD card. I have read through the wpa_supplicant.conf docs but did not see a solution. I know I can set up several SSID configurations however I want to be able configure when the SSID is not known. I apologize in advance if this has been answered. If it has I would appreciate a link to the thread. Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi4B w/ HiFiBerry DAC+ micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=113327 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
paul- wrote: > There were several users trying to get the Merus Amp to work. I think I > finally cracked it. > > _Disable_onboard_audio_ > dtparm=audio=off > > _Disable_SPI_ > Remove the spi=on from the line > > Code: > > > deparam=i2c_arm=on,spi=on,i2s=on > > > > Then on the Squeezelite page, make sure you limit the sample rate to > 48000. > > Also, make sure you do not play any music until you have turned down > the Limit Threashold as described in the docs. If you try to play > music with the default Alsa settings, it will likely lockup the > amplifier chip requiring a reboot. > > Once things are set in alsa mixer, then you should save the alsa > settings on the "Card Control" Page. > > I'll see about adding some better controls in pCP7. Hi Paul, firstly I want to say I really appreciate all the work your team has done on this. I followed the instructions above but I am stuck on the Limit Threshold setting. Where do I find/change that? Thanks Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room (TV) - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System Bedroom 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's All running piCorePlayer 6.1.0 and synchronized. Building Pi Boombox - RPi3B+ w/ HiFiBerry DAC+, Touch Screen in place of Cassette Decks micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] piCorePlayer 2nd Wifi USB Dongle
Did not find this in search so forgive me if it has been covered before. Will piCorePlayer recognize a second Wifi connection through a USB Wifi dongle? I have an application where I would like to have WAP enabled for phone control and another Wifi connection for internet access. This will be on a Pi3B+. Thanks Current: Windows 10 - LMS Server 7.9.3 8TB RAID 10 Media Drive Office - Windows 10 - Squeezelite-X Living Room - 2x RPiZeroW w/ Allo MiniBoss each running a Logitech Z623 System Family Room - 1X RPi3B+ HDMI to Denon Surround Receiver 7.2 System 1x RPiZeroW with HiFiBerry MiniAmp to 2X POLK OWM3's Building Pi Boombox - RPi3B+ w/ HiFiBerry DAC+, Touch Screen in place of Cassette Decks micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=112009 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer + LMS + players sync = music stops after > 10s
msg wrote: > Reporting back that I updated to piCorePlayer 5.0.1 last weekend and > this issue with Spotty seems to be mostly resolved here. > Good work and thanks for all the developers' efforts across the board in > keeping this platform alive. Certainly worthy of donation. I had this same issue a couple of months back but with all sources local and streamed. The fix was to make sure a players had same software versions and patches installed. Ditto to thanking the developers for such a great alternative to other options out there. micmed's Profile: http://forums.slimdevices.com/member.php?userid=67919 View this thread: http://forums.slimdevices.com/showthread.php?t=107767 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
