Re: [SlimDevices: Unix] Jivelite on a Joggler
Thanks. Another thought: how about an applet which could switch the line-out between the 3 options in alsamixer? LMS server: Pi Zero Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Avantree Priva BT transmitter Brexit = stupidity castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
castalla wrote: > Thanks. > > Another thought: how about an applet which could switch the line-out > between the 3 options in alsamixer? That seems possible. The command line version is: Code: amixer sset 'Auto-Mute Mode' 'Line Out+Speaker' (or 'Speaker Only' or 'Disabled') chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
The Moog wrote: > Hi there, > > This is the first beta that has allowed me to attempt an insitu update > on my Pi3 from 5.0.1. It downloads but then throws an error untarring > boot tar. > > Cheers. I had tried recently to update from v5.0.0 to beta7 but was advised to make a fresh image. Seeing *The Moog*'s report I decided to try again. I just tried this on a rpi3b running v5.0.1 (Standard install) On first attempt I was advised to increase the space available, which I did, upto 300MB. Code: [ OK ] Successfully downloaded tce files. [ OK ] Free space: 244112k - Required space: 12000k Install stalled Code: ./overlays/w5500.dtbo ./overlays/wittypi.dtbo ./README ./RELEASE ./bcm2708-rpi-zero.dtb ./bcm2709-rpi-2-b.dtb ./bcm2710-rpi-2-b.dtb ./bcm2710-rpi-3-b-plus.dtb ./bcm2710-rpi-3-b.dtb ./bcm2710-rpi-cm3.dtb ./bcm2711-rpi-4-b.dtb ./kernel419102.img ./kernel419102v7.img ./kernel419102v8.img tar: write error: No space left on device [ ERROR ] Error untarring boot tar. Result: 1 [ INFO ] Restoring old OS... [ INFO ] Unmounting /mnt/mmcblk0p1... I increased the space to 500MB Code: 0:00:00 ETA [ OK ] Successfully downloaded tce files. [ OK ] Free space: 434176k - Required space: 12000k but it still failed to complete Code: ./overlays/w1-gpio.dtbo ./overlays/w5500.dtbo ./overlays/wittypi.dtbo ./README ./RELEASE ./bcm2708-rpi-zero.dtb ./bcm2709-rpi-2-b.dtb ./bcm2710-rpi-2-b.dtb ./bcm2710-rpi-3-b-plus.dtb ./bcm2710-rpi-3-b.dtb ./bcm2710-rpi-cm3.dtb ./bcm2711-rpi-4-b.dtb ./kernel419102.img ./kernel419102v7.img ./kernel419102v8.img tar: write error: No space left on device [ ERROR ] Error untarring boot tar. Result: 1 [ INFO ] Restoring old OS... [ INFO ] Unmounting /mnt/mmcblk0p1... ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
paul- wrote: > I had my boards for a few days, but left them in the box until I could > get the next pCP images out. I have the board with headphones out > (And a line out board). Working perfectly...I'll see if I can > streamline some of the install. > Thanks Paul - looking forward to what you can do to streamline the install. I just went through a fresh install using the latest b9 image, and I'm pleased to see that the framebuffer settings made the cut. And the lcd-brightness.sh script seemed to arrive automatically - I'm guessing that's now part of the 'default skin' extension. So that's a couple more steps that are a bit easier to do already. I'll update my instructions based on b9. I'd say that really just leaves the cmdline.txt and /opt/bootlocal.sh steps that could be streamlined somehow. Everything seems functional in the skin now apart from the 'brightness when off' feature in the piCorePlayer applet. I know Ralphy was looking into a patch to apply the '_GENERIC' changes to JiveMain.lua, but I guess he was holding off with that, and the updates to the skin and its strings, until I provided a new strings file to finish the job. I'll do that today. chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS on Zorin Linux
Thanks for your assistance Slimchances all installed and Tidal is now working. My local music store is on an external Iomega drive and when plugged into the SFF PC Zorin sees it and I can browse the files. However, within the LMS server settings via my IPad when trying to perform the first scan I can only see a very limited folder structure. Do I have to do it on the pc its self? Squeezebox touch Logitech Media server 7.9.1 running on Asus Beebox 3050 SFF Pc with USB 3.0 750GB HD Arcam SA10 amplifier Chord rumour speaker cable Dali Mentor Menuets on Custom Design stands tank121's Profile: http://forums.slimdevices.com/member.php?userid=17169 View this thread: http://forums.slimdevices.com/showthread.php?t=111603 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
paul- wrote: > You should not be allowed to enter odd characters in the web interface. > I tried to trap characters coming from the Bluetooth device itself. > Would you mind removing bluetooth, rebooting and then re-pairing. The > non regular ascii should be ignored.. > > I dont have any devices that I can test with. Mine all have nice > names. And python UTF8 support made my head hurt. The headphone itself is not using German characters, that was me editing the name of the headphone in the Bluetooth section. If they make problems than I will just use 7bit ASCII characters. No problem! carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
I took the fresh 9b audio image and the first configuration step was cpu isolation. 1. Isolated cpu 0 - pi4 booted without problem 2. Isolated 0,3 - pi4 is crashing during boot and it is not reachable in network, i do not have a display at home, so i don't know, what is happening. ;) praganj's Profile: http://forums.slimdevices.com/member.php?userid=41091 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
gregklanderman wrote: > FWIW you should be able to simplify that loop to > > > Code: > > > while ! pigs t >/dev/null 2>&1 ; do > #printf "\nWaiting for pigpiod to initialize\n" > sleep 1 > done > printf "\npigpiod is running\n" > > > Thanks Greg - that's much neater, and works the same way. chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
CURRENT BEST STEPS AS OF 09FEB2020 (TO SUIT NEW B9 IMAGE): Put a fresh pcp6-b9 image on the SD card. Whilst the SD card is still in the laptop: Enter wifi credentials in wpa_supplicant.conf.sample and save as wpa_supplicant.conf Add these parameters to the end of cmdline.txt. All of the parameters in cmdline.txt should be on one continuous line, with a space between each one. Code: fbcon=map:10 fbcon=font:VGA8x16 Boot the RPi from this SD card. The default file system is 58mb, so for this basic setup it is not necessary to resize the FS - I have about 6.6mb to spare after this setup. Add these commands to /opt/bootlocal.sh to set up the framebuffer. Make sure they are inserted near the top of the file, BEFORE pcp_startup.sh. (The init string in 'flexfb' (https://github.com/notro/fbtft/wiki/flexfb) has now been constructed to match the settings found in Pimoroni's sample 'def _init(self)' Python function 'here' (https://github.com/pimoroni/st7789-python/blob/master/library/ST7789/__init__.py)). Note that the third line of the init code, highlighted in bold, can be changed to '-1,0x36,0x70,\' (as per the Pimoroni original settings) to rotate the display 90 degrees clockwise. Code: modprobe flexfb setaddrwin=0 width=240 height=240 init=\ -1,0x01,\ -2,150,\ -1,0X36,0X00,\ -1,0xB2,0x0C,0x0C,0x00,0x33,0x33,\ -1,0x3A,0x05,\ -1,0xB7,0x14,\ -1,0xBB,0x37,\ -1,0xC0,0x2C,\ -1,0xC2,0x01,\ -1,0xC3,0x12,\ -1,0xC4,0x20,\ -1,0xD0,0xA4,0xA1,\ -1,0xC6,0x0F,\ -1,0xE0,0xD0,0x04,0x0D,0x11,0x13,0x2B,0x3F,0x54,0x4C,0x18,0x0D,0x0B,0x1F,0x23,\ -1,0xE1,0xD0,0x04,0x0C,0x11,0x13,0x2C,0x3F,0x44,0x51,0x2F,0x1F,0x1F,0x20,0x23,\ -1,0x21,\ -1,0x11,\ -1,0x29,\ -2,100,\ -3 modprobe fbtft_device name=flexfb speed=3200 cs=1 gpios=dc:9 Load the pcp-jivelite_default-qvga240squareskin.tcz extension In the Jivelite section of the tweaks page, change the Framebuffer to /dev/fb1 and click on 'Set FB'. The Frame Rate and Frame Depth can be left blank - they will default to 22 and 32 respectively, which are fine. Install Jivelite from the Tweaks page (this step includes an automatic backup, so accept the reboot prompt.) Screen should show console messages during boot, then piCorePlayer splash screen, then Jivelite Choose Language. install pcp-sbpd.tcz Make a /home/tc/sbpd-script.sh with the following content: Code: #!/bin/sh # start pigpiod daemon pigpiod -t 0 -f -l -s 10 # wait for pigpiod to initialize - indicated by 'pigs t' exit code of zero while ! pigs t >/dev/null 2>&1 ; do printf "\nWaiting for pigpiod to initialize\n" sleep 1 done printf "\npigpiod is running\n" # load uinput module - required to be able to send keystrokes # then set the permission to group writable, so you don't need to run sbpd with root permissions sudo modprobe uinput sudo chmod g+w /dev/uinput # The full list of Jivelite key commands can be found here: # https://github.com/ralph-irving/tcz-lirc/blob/master/jivekeys.csv # button A SW1=5 # GPIO pin number SH1=KEY:KEY_EQUAL # command for SHORT press ( = volume up) LO1=KEY:KEY_SPACE # command for LONG press (= pause) LMS1=250 # milliseconds for long press # button B SW2=6 SH2=KEY:KEY_MINUS # ( = volume down) LO2=KEY:KEY_Q # ( = power) LMS2=250 # button X SW3=16 SH3=KEY:KEY_UP LO3=KEY:KEY_RIGHT LMS3=250 # button Y SW4=20 SH4=KEY:KEY_DOWN #LO4=KEY:KEY_LEFT LO4=KEY:KEY_ESC LMS4=250 #CMD="sbpd -v -f /home/tc/sbpd_commands.cfg \ CMD="sbpd -v \ b,$SW1,$SH1,2,0,$LO1,$LMS1 \ b,$SW2,$SH2,2,0,$LO2,$LMS2 \ b,$SW3,$SH3,2,0,$LO3,$LMS3 \ b,$SW4,$SH4,2,0,$LO4,$LMS4" echo $CMD $CMD > /dev/null 2>&1 & Make /home/tc/sbpd-script.sh executable: chmod +x /home/tc/sbpd-script.sh Add /home/tc/sbpd-script.sh to user commands, then save (this step includes an automatic backup, so go to main page and reboot). Jivelite should be fully functional now, including navigation with the four buttons. Set up the Squeezelite output device, e.g. to 'HiFiBerry DAC Zero/MiniAMP' Add this to config.txt Code: gpio=25=op,dh Reboot one more time to finish the process. chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Hi there, This is the first beta that has allowed me to attempt an insitu update on my Pi3 from 5.0.1. It downloads but then throws an error untarring boot tar. Cheers. The Moog's Profile: http://forums.slimdevices.com/member.php?userid=5192 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS on Zorin Linux
tank121 wrote: > Thanks for your assistance Slimchances all installed and Tidal is now > working. > My local music store is on an external Iomega drive and when plugged > into the SFF PC Zorin sees it and I can browse the files. > However, within the LMS server settings via my IPad when trying to > perform the first scan I can only see a very limited folder structure. > Do I have to do it on the pc its self? I am not sure if the Ipad would be compatible with a Linux install. I have only tried android which worked. Sorry I can't help - Version: 8.0.0 - 1579900545 @ Fri Jan 24 22:48:53 CET 2020 - Operating system: Debian - EN - utf8 - Platform Architecture: x86_64-linux - Perl Version: 5.26.1 - x86_64-linux-gnu-thread-multi - IO::Socket::SSL: 2.060 - Database Version: DBD::SQLite 1.58 (sqlite 3.22.0) One SB Touch connected by Ethernet - Denon AVR -1912 Receiver, Paradigm 4.1 speakers SB Classic connected by Optical to FX Audio D802C amp and Sinclair bookshelf speakers Two SB Radios wireless SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165 View this thread: http://forums.slimdevices.com/showthread.php?t=111603 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
chill wrote: > Everything seems functional in the skin now apart from the 'brightness > when off' feature in the piCorePlayer applet. I know Ralphy was looking > into a patch to apply the '_GENERIC' changes to JiveMain.lua, but I > guess he was holding off with that, and the updates to the skin and its > strings, until I provided a new strings file to finish the job. I'll do > that today. I have the patch ready for JiveMain and will rebuild jivelite when the strings file is ready and Michael has added German and French translations for the Square QVGA skin. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
castalla wrote: > Thanks - seems to work! Ok, good. I need to update it to read the current mode at start-up, so that the correct option is selected when the applet first loads. chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
paul- wrote: > Its the boot partition thats too small. I thought it would fit, but > all the small dtb files chew up minimum allocation units... > > Guess not. I'll edit the update script to only extract the needed kernel and initrd's..that will save some space. Let me run a few 5.0.0 to 6.0.0 tests first. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
sbp wrote: > I have added/changed the Danish part of the string. Thanks Steen, your changes have been applied. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
ralphy wrote: > I have the patch ready for JiveMain and will rebuild jivelite when the > strings file is ready and Michael has added 'German and French > translations for the Square QVGA skin' > (https://github.com/ralph-irving/jivelite/commit/3cbbd84842b482a838cde3a434ca6dcd4388298e). I've collected all the translations into up-to-date versions of the two strings files (one for the skin, and one for the piCorePlayer applet). They're in the attached zip. 29324 +---+ |Filename: Strings.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=29324| +---+ chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
On my fresh installation of version b9 LMS configure and webpage not accessible. The PCP webpage indicates that LMS is running, but not accessible. LMS cache is on USB drive. 1x Picoreplayer with Hifiberry DAC/ADC pro, 3x Picoreplayer with Jivelite 7" Display und IQaudio DigiAmp+, 2 Picoreplayer 6 Beta on RPI4+ LMS, Marantz PM-15S1 amplifier. Gerhardc's Profile: http://forums.slimdevices.com/member.php?userid=9800 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Gerhardc wrote: > On my fresh installation of version b9 LMS configure and webpage not > accessible. The PCP webpage indicates that LMS is running, but not > accessible. LMS cache is on USB drive. Works for me. What is the URL that it is trying to open. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 5.0.0
paul- wrote: > Do you want squeezelite to resample? or just tell lms to only send > 44/48 to the device. I want to try the connection: RPi3B + Allo Kalli Reclocker + DIY Dac with ES9038PRO using I2S. Which audio output in Squeez setting will be correct ? newpeter's Profile: http://forums.slimdevices.com/member.php?userid=69082 View this thread: http://forums.slimdevices.com/showthread.php?t=110642 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
castalla wrote: > Thanks. > > Another thought: how about an applet which could switch the line-out > between the 3 options in alsamixer? Try this draft version. Download the attached zip and put the resulting folder in /root/.jivelite/userpath/applets, then restart Jivelite. The applet should then appear under 'Settings'. 29322 +---+ |Filename: JogglerAudio.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=29322| +---+ chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 5.0.0
Not sure which driver will support this DAC. Very few ESS dacs are officially supported due to ESS closed sources. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110642 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
chill wrote: > Yes. And separately, the 'Brightness when off' menu is a setting under > the piCorePlayer applet. Thanks. I noticed that our ScreenSaver patch was looking for the backlight device as a flow to add the menu item. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
gian wrote: > Hello Paul, > > I have updated to: > Fidelio | piCorePlayer v6.0.0-b9 | www v0001 | linux 4.19.102-pcpCore_v7 > | piCore v10.3pCP | Squeezelite v1.9.6-1206-pCP > > but power save is ON, and won't let me change it. I know. RPi kernels are built with it enabled (I use the same settings they do). You can't change it with iwconfig. Did you try to do what you need? There is a discussion somewhere on the RPI forums, RPi is of the opinion that is should be enabled. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer DSD playback
tjp888 wrote: > I've gone through the same steps. This does work pretty well. > However, depending on your system you may notice a degradation with > sound quality when the pCP converts to PCM. > > I say this because I've been using this method with both a Touch and a > pCP with a HiBerry Digi+ hat. I used the optical port from both devices > to my Denon AVR X3400h. The Denon showed a PCM signal at 88.2kHz. > After using this method for almost 2 years I just recently discovered > that the Denon's built in Heos app can play DSD files natively. It can > access my LMS directly. When I use the Heos method there is a noticeable > improvement with the sound quality (fuller soundstage, clearer details). > My speakers are just KEF LS50 with a KEF subwoofer. Nothing fancy. I was > quite surprised at the improvement. I mistakenly assumed PCM would be > indistinguishable from DSD on such a modest system. > > So bottom line, it's worth the effort if you can get native DSD to > play. > > > Signal from Touch or pCP w/HifiBerry > https://i.imgur.com/lJ3tCYC.jpg > > > Signal when access DSD file directly from AVR > https://i.imgur.com/eFBYP80.jpg -- I am thinking of upgrading AVR to Denon HEOS device --- how do u achieve the connection of Denon HEOS to LMS ?? Is it through DLNA ? THX, -- Bill Clark, Windham, VT Logitech Media Server Version: 7.9.2 - 1578727069 @ Sat Jan 11 08:44:06 CET 2020 Hostname: ubuntu-lms - ProxMox Virtual Environment 5.4-3 piCorePlayer | piCorePlayer v5.0.0 | linux 4.19.40-pcpCore_v7 | piCore v10.1pCP | Squeezelite v1.9.2-1158-pCP --- kappclark's Profile: http://forums.slimdevices.com/member.php?userid=29572 View this thread: http://forums.slimdevices.com/showthread.php?t=108593 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
castalla wrote: > It currently shows the line-ou+speaker on start-up Yeah, that's not right. The Joggler retains the last used setting across a reboot, and the applet should show whatever the current setting is. The version in the attached zip does this properly now. Whenever the the screen with the three options is shown the applet reads the current setting and sets the corresponding radio button. I'm reasonably happy that it's now doing what's intended - the chosen option is reflected in what alsamixer shows. But I'm not seeing any difference between the 'Speaker Only' and 'Line Out+Speaker' options. Both options seem to play through the built-in speaker until a 3.5mm jack is inserted, at which point the built-in speaker mutes and the sound switches to the speaker attached to the 3.5mm jack. The 'Disabled' option allows the built-in and external speakers to play together. 29326 (to update, replace the folder you created for the previous version with the folder in this new zip) +---+ |Filename: JogglerAudio.zip | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=29326| +---+ chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Chris010887 wrote: > > 1.) The audio and also the interactions on the Smartphone (volume > up/down, next,...) are delayed for many seconds, that makes the handling > a mess. Is there the possibility to make some config changes or is it a > known issue that is not fixed yet? > > > > > > There is always going to be a delay. You can try to reduce the default > > delay I run at 1000, but that also increases occasional hickups. > > > > > > > > > > > > 2.) Connecting: Would it be possible to always have the Player > > > "discoverable" and just set a PIN that > > > is needed to connect? That would make it possible to connect devices > > > without accessing the PcP via Web and setting the Player discoverable. > > > > > > > > > I'm not going to do that. Once your phone is paired, it is trusted, > > so you can initiate the connection from your phone. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
chill wrote: > Ok, good. I need to update it to read the current mode at start-up, so > that the correct option is selected when the applet first loads. It currently shows the line-ou+speaker on start-up LMS server: Pi Zero Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Avantree Priva BT transmitter Brexit = stupidity castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS on Zorin Linux
You may have to set ownership/permissions of your Music Folders/Files. This might help https://forums.slimdevices.com/showthread.php?92526-Setting-file-permissions-correctly - Version: 8.0.0 - 1579900545 @ Fri Jan 24 22:48:53 CET 2020 - Operating system: Debian - EN - utf8 - Platform Architecture: x86_64-linux - Perl Version: 5.26.1 - x86_64-linux-gnu-thread-multi - IO::Socket::SSL: 2.060 - Database Version: DBD::SQLite 1.58 (sqlite 3.22.0) One SB Touch connected by Ethernet - Denon AVR -1912 Receiver, Paradigm 4.1 speakers SB Classic connected by Optical to FX Audio D802C amp and Sinclair bookshelf speakers Two SB Radios wireless SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165 View this thread: http://forums.slimdevices.com/showthread.php?t=111603 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS on Zorin Linux
What is the file system on the external drive? (ext,NTFS,FAT...) - Version: 8.0.0 - 1579900545 @ Fri Jan 24 22:48:53 CET 2020 - Operating system: Debian - EN - utf8 - Platform Architecture: x86_64-linux - Perl Version: 5.26.1 - x86_64-linux-gnu-thread-multi - IO::Socket::SSL: 2.060 - Database Version: DBD::SQLite 1.58 (sqlite 3.22.0) One SB Touch connected by Ethernet - Denon AVR -1912 Receiver, Paradigm 4.1 speakers SB Classic connected by Optical to FX Audio D802C amp and Sinclair bookshelf speakers Two SB Radios wireless SlimChances's Profile: http://forums.slimdevices.com/member.php?userid=165 View this thread: http://forums.slimdevices.com/showthread.php?t=111603 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Hi all, I'm new here, but I hope this is nothing that has already been discussed a hundred times... I'm running the 6.0.0-b9 on my RPi4 with Hifiberry Amp2 since today. Had a few problems with the upgrade. Squeezelite was not recognizing the Card anymore and wasn't starting. First I was using a fresh image and hat the problem from the beginning, then I tried using the 6.0.0-b7 and then performing the isitu update. That was working first, but when I was activating bluetooth settings (and expanding file system) it hasn't worked again. The solution seemed to be making the settings under 6.0.0-b7 and then making the upgrade. The main question is about Streaming from Bluetooth Device (Smartphone) to PCP. I got it to run basically and it's fine. But there's two things that make problems. 1.) The audio and also the interactions on the Smartphone (volume up/down, next,...) are delayed for many seconds, that makes the handling a mess. Is there the possibility to make some config changes or is it a known issue that is not fixed yet? 2.) Connecting: Would it be possible to always have the Player "discoverable" and just set a PIN that is needed to connect? That would make it possible to connect devices without accessing the PcP via Web and setting the Player discoverable. My Pi is on GE-LAN, so I don't think it is just about the Bluetooth Audio/Control. Looking forward to your answers, Br, Chris Chris010887's Profile: http://forums.slimdevices.com/member.php?userid=69837 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
ralphy wrote: > Do you get the When Off menu item in the screen->screensavers with the > pirate audio? Yes. And separately, the 'Brightness when off' menu is a setting under the piCorePlayer applet. chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
chill wrote: > I've collected all the translations into up-to-date versions of the two > strings files (one for the skin, and one for the piCorePlayer applet). > They're in the attached zip. Do you get the When Off menu item in the screen->screensavers with the pirate audio? Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Hence the reason for inconsistencies. But they are all separate coded on each page. And due to different programmers Over the years, there are many implentations. Im not sure where Im going with the updates, so I left in a few options for now. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Its the boot partition thats too small. I thought it would fit, but all the small dtb files chew up minimum allocation units... Guess not. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS on Zorin Linux
Its the same on the PC SFF I can only see these directories within LMS and not the external USB drive but I can browse it within Zorin Linux fine. +---+ |Filename: E3FD9A2F-583C-4C71-B6C3-2A63D3A1C7F8.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=29325| +---+ Squeezebox touch Logitech Media server 7.9.1 running on Asus Beebox 3050 SFF Pc with USB 3.0 750GB HD Arcam SA10 amplifier Chord rumour speaker cable Dali Mentor Menuets on Custom Design stands tank121's Profile: http://forums.slimdevices.com/member.php?userid=17169 View this thread: http://forums.slimdevices.com/showthread.php?t=111603 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
The URL is: http://192.168.170.5:9000/ 1x Picoreplayer with Hifiberry DAC/ADC pro, 3x Picoreplayer with Jivelite 7" Display und IQaudio DigiAmp+, 2 Picoreplayer 6 Beta on RPI4+ LMS, Marantz PM-15S1 amplifier. Gerhardc's Profile: http://forums.slimdevices.com/member.php?userid=9800 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
paul- wrote: > Gain, > > I just built new kernels, lets see how that works, with the latest > power management modification. If I dont get distracted, Ill try to > get a new image pushed out. > > Paul Hello Paul, I have updated to: Fidelio | piCorePlayer v6.0.0-b9 | www v0001 | linux 4.19.102-pcpCore_v7 | piCore v10.3pCP | Squeezelite v1.9.6-1206-pCP but power save is ON, and won't let me change it. Madamina, il catalogo è questo... town: Musical Fidelity Dr.Thomas, Preamp II, Infinity 7K, Squeezebox Classic (2), 2 Squeezelite bt on Raspi, Raspberry Pi 2 with HiFiBerry, Ubuntu 18.4 LTS server country: Musical Fidelity A-5, Infinity Renaissance 90, Musical Fidelity A120, Sonus Faber Concertino, Squeezebox Classic, SB Touch, Raspberry Pi 2 with HiFiBerry, Raspberry Pi Zero-w bt, Raspberry Pi 3 server with Debian Jessie on Arm7 gian's Profile: http://forums.slimdevices.com/member.php?userid=6702 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
chill wrote: > Try this draft version. Download the attached zip, unzip it and put the > resulting folder in /root/.jivelite/userpath/applets, then restart > Jivelite. The applet should then appear under 'Settings'. > > 29322 Thanks - seems to work! LMS server: Pi Zero Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Avantree Priva BT transmitter Brexit = stupidity castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
I have added/changed the Danish part of the string. +---+ |Filename: strings.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=29327| +---+ piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: 'https://www.picoreplayer.org' (https://www.picoreplayer.org/) *Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like piCorePlayer* sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
chill wrote: > Yeah, that's not right. The Joggler retains the last used setting > across a reboot, and the applet should show whatever the current setting > is. > > The version in the attached zip does this properly now. Whenever the > the screen with the three options is shown the applet reads the current > setting and sets the corresponding radio button. > > I'm reasonably happy that it's now doing what's intended - the chosen > option is reflected in what alsamixer shows. But I'm not seeing any > difference between the 'Speaker Only' and 'Line Out+Speaker' options. > Both options seem to play through the built-in speaker until a 3.5mm > jack is inserted, at which point the built-in speaker mutes and the > sound switches to the speaker attached to the 3.5mm jack. The > 'Disabled' option allows the built-in and external speakers to play > together. > > 29326 > > (to update, replace the folder you created for the previous version with > the folder in this new zip) Okay - will do. I'm really chuffed with this setup - it's really brought the Joggler back to life (in fact it's now my main LMS deviice). (One gotcha I hit was on the Quit screen - hit the terminal option by mistake when I wanted to reboot ... grrr) LMS server: Pi Zero Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Avantree Priva BT transmitter Brexit = stupidity castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
in PCP 6b9 page /cgi-bin/minor_update.cgi?ACTION+value%3D= ( after a minor update check ) does not have a return button or auto timer. I have seen some inconsistencies on these return timers and buttons before , but never reported as they are minor and not interfering with functionality. But I remember you were looking to round up development on this release 6.0, So perhaps this is the moment to collect and report such things. My proposal would be to never auto reload such pages, of have the option to freeze the timer, As I try to read all the windows and scan for error messages , and then 7 seconds is to fast of you see something interesting. But present a manual return button to indicate the page is no longer updated with emerging info. BTW many THANKS for all the new versions. M-H Pi based multi-room audio system powered by PiCorePlayer(s): Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card, Pi Zero with Phat-beat , and a few other tests... M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Thanks for the B9 upgrade. I just did an in situ update on my players, and everything is fine. I was having problems playing hi-res files on my newest player - an Allo USBridge Sig with DigiOne Sig - but that issue is now resolved. Thanks again for developing and maintaining such a great piece of software. :) Jim Pattison's Profile: http://forums.slimdevices.com/member.php?userid=64464 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
mherger wrote: > > I have the patch ready for JiveMain and will rebuild jivelite when > the > > strings file is ready and Michael has added German and French > > translations for the Square QVGA skin. > > Uh, oh... what file? French? I hope there isn't much more than a few > words :-D > I think Ralphy was referring to the skin name translations that you had already provided. I added them to the consolidated files that I sent him earlier, and he's already included them in the installable package. Code: QVGA240SQUARE_SKIN # SLT: QVGA refers to the "quarter VGA" resolution of the display # CS QVGA skin krajiny # DA QVGA-tema, liggende DE Quadratischer QVGA-Skin (240x240) EN QVGA 240x240 Square Skin # ES Máscara horizontal QVGA # FI QVGA-vaakaolemus FR Habillage carré QVGA (240x240) # IT Skin QVGA orizzontale NL QVGA 240-Vierkant-skin # NO QVGA liggende skall # PL Karnacja pozioma QVGA # RU : QVGA, # SV QVGA-skal i liggande format chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=111502 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
I have the patch ready for JiveMain and will rebuild jivelite when the strings file is ready and Michael has added German and French translations for the Square QVGA skin. Uh, oh... what file? French? I hope there isn't much more than a few words :-D -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Pirate Audio 240x240 screen
I think Ralphy was referring to the skin name translations that you had already provided. I added them to the consolidated files that I sent him earlier, and he's already included them in the installable package. And I thought I had committed them myself already... thanks anyway! -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
Today Jivelite froze this morning at 4:45 - as it sometimes does (at different times). I did as usual, I unplug at the wall, reboot. This time piCorePlayer gave me the following message (same as in #1003 in this thread a few pages back): Starting Jivelite...There is a problem with the Jivelite installation. Please remove and reinstall Jivelite. I didn't do this, I just rebooted piCorePlayer from the web-interface and Jivelite came back up. I wonder if anyone has found the root cause of this problem? (first problem being that it freezes from time to time, but second problem that it wouldn't start) ... is it just that I've used an old SD-card (that I've found in a drawer) and it's either just a slow one, or maybe near end-of-life? Best regards, Claus cfuttrup's Profile: http://forums.slimdevices.com/member.php?userid=32784 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
paul- wrote: > > Chris010887 wrote: > > > > 1.) The audio and also the interactions on the Smartphone (volume > > up/down, next,...) are delayed for many seconds, that makes the handling > > a mess. Is there the possibility to make some config changes or is it a > > known issue that is not fixed yet? > > > > > > > > > > There is always going to be a delay. You can try to reduce the default > > > delay I run at 1000, but that also increases occasional hickups. > > > > > > > > > I'm not going to do that. Once your phone is paired, it is trusted, so > > > you can initiate the connection from your phone.> > > > > > > > Thanks for you reply. > > > > @Pairing: Ok, for me and my wife it's no problem - but I thought it > > would be useful if you have guests that want to stream something, > > nevermind... > > > > @Delay: I also set to 1000, but unfortunately it's still around 10 > > seconds late :confused: > > > > Would you say that is normal? Chris010887's Profile: http://forums.slimdevices.com/member.php?userid=69837 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
I just tried this image on an Openframe 2 ... It boots and works using ethernet. But, as Roobarb says: If you're using an OpenFrame 2 the wireless connection does work... sort of. Performance is absolutely terrible and I've not been able to do anything about it. Maybe it's my OF2 which is at fault, but feedback would be appreciated. We're using the brcmsmac driver; the b43 was worse and broke Bluetooth for me. The broadcom-wl driver might do the trick, but there are licensing issues, so I can't distribute it. Good luck! In fact, wifi doesn't work at all ... can get to settings and enter the SSID/Passphrase. On reboot, the settings are recalled but no wifi address has been assigned. I googled for info on the wl driver, but it made little sense, I'm afraid. Any ideas? (sqpOS 3 works on the Openframe 2 - maybe Jivelite is a step too far ,,,) LMS server: Pi Zero Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Avantree Priva BT transmitter Brexit = stupidity castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Chris010887 wrote: > > @Delay: I also set to 1000, but unfortunately it's still around 10 > seconds late :confused: > Too many buffers involved. Leave the phone volume alone, and change the volume of the output device from any lms interface device. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
castalla wrote: > > Any ideas? > Nope. Is Roobarb's comment related to the Bionic images that I started from, or the newer image that he's made? I don't have an OF2, and wouldn't know how to go about trying the broadcom-wl driver I'm afraid. chill's Profile: http://forums.slimdevices.com/member.php?userid=10839 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 5.0.0
I'm using the Digione +Rpi3 whit LMS 7.9.2 running on a Daphile Server No problems with PCM playback. I enable both settings for DSD-over-PCM in LMS Player Settings. After this settings was enable I was unable to playbapck DSD or PCM, the cursour move but no sound, I tried the following actions, whitout sucess: -Stop/Start Squeezelite on the Picoreplayer configuration page -Reboot PicorePlayer -Reboot Daphile By un-checking the options for DoP in LMS everything get back to normal. Is it a bug or I missed a step in configuring Picoreplayer ? Tête à FLAC 2 X SB Classic 2 X SB2 1 X SB Boom 1 X SB Touch 1 X Transporter 2 X Duet + Remote 3 X Rpi+Picoreplayer 2 X Chromecast 1 X Chromecast Audio 1 X Atoll ST100 All devives connected via CeolBOX server aka The Musical Box Using OrangeSqueeze and Material Skin Plug-in to remote all my connected devices. mftech's Profile: http://forums.slimdevices.com/member.php?userid=1586 View this thread: http://forums.slimdevices.com/showthread.php?t=110642 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite on a Joggler
chill wrote: > Nope. Is Roobarb's comment related to the Bionic images that I started > from, or the newer image that he's made? I don't have an OF2, and > wouldn't know how to go about trying the broadcom-wl driver I'm afraid. It relates to https://www.jogglerwiki.com/forum/viewtopic.php?f=2=4519 I read through the whole thread but didn't glean anything So I'll just use sqpOS then. LMS server: Pi Zero Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Avantree Priva BT transmitter Brexit = stupidity castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=110040 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] BETA: piCorePlayer6.0.0 - PI4 support
Jim Pattison wrote: > Thanks for the B9 upgrade. I just did an in situ update on my players, > and everything is fine. > > I was having problems playing hi-res files on my newest player - an Allo > USBridge Sig with DigiOne Sig - but that issue is now resolved. > > Thanks again for developing and maintaining such a great piece of > software. :) Same here, -in situ- worked fine from b6 (the last official beta?) to b9. Daverz's Profile: http://forums.slimdevices.com/member.php?userid=32335 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
