date:20181017

Re: Not able to gthiet the email address..

2018-10-17 Thread Madhi Krishnan

hey rishi..
Thank you for the reply...
I have prepared the method just for checking weather it is returning me the
email ID or not..
Some how i have manage to get the email id..
By passing the userLogin IN Parameter along with the partyId...
Before that it was giving error something like this...
Error in Service [getPartyEmail]: You must be logged in to complete the
[Get the email of the party] process
Anyway Thank you guys...

On Wed, Oct 17, 2018 at 5:19 PM Rishi Solanki 
wrote:

> Hi Madhi,
> I have loaded the data you provided in email over demo trunk [1] and able
> to run the getPartyEmail service successfully.
> You must did something wrong in your code, and I guess what Aditya noticed
> partyId as 10035 is hardcoded in your code, which should be problem at your
> end.
>
> [1]
>
> https://demo-trunk.ofbiz.apache.org/webtools/control/setSyncServiceParameters?SERVICE_NAME=getPartyEmail_NAME=pool&_RUN_SYNC_=Y
>
> Follow the link and provide partyId as Pawan66 you shared, you will get the
> service result. Usually, this kind of error in your own code can be rectify
> by logging into the code.
>
> Regards,
> --
> Rishi Solanki
> Sr Manager, Enterprise Software Development
> HotWax Systems Pvt. Ltd.
> Direct: +91-9893287847iu
> http://www.hotwaxsystems.com
> www.hotwax.co
>
>
> On Tue, Oct 16, 2018 at 6:19 PM Madhi Krishnan <
> madhi.krish...@udyogmandir.in> wrote:
>
> > Hey Rishi..
> > Here the partyId is Pawan66...
> >
> > The PartyContactMech definitation :-
> > 
> >  > createdStamp="2018-10-16 16:58:00.38" createdTxStamp="2018-10-16
> > 16:57:59.935" fromDate="2018-10-16 16:58:00.379"
> > lastUpdatedStamp="2018-10-16 16:58:00.38" lastUpdatedTxStamp="2018-10-16
> > 16:57:59.935" partyId="Pawan66"/> 
> >
> > ContactMech : -
> > 
>   > contactMechId="10080" contactMechTypeId="EMAIL_ADDRESS"
> > createdStamp="2018-10-16 16:58:00.259" createdTxStamp="2018-10-16
> > 16:57:59.935" infoString="primaryem...@gmail.com"
> > lastUpdatedStamp="2018-10-16 16:58:00.259" lastUpdatedTxStamp="2018-10-16
> > 16:57:59.935"/> 
> >
> > PartyContactMechPurpose : -
> > 
> >  > contactMechPurposeTypeId="PRIMARY_EMAIL" createdStamp="2018-10-16
> > 16:58:06.382" createdTxStamp="2018-10-16 16:58:06.373"
> fromDate="2018-10-16
> > 16:58:06.382" lastUpdatedStamp="2018-10-16 16:58:06.382"
> > lastUpdatedTxStamp="2018-10-16 16:58:06.373" partyId="Pawan66"/>
> > 
> >
> > On Tue, Oct 16, 2018 at 6:00 PM Rishi Solanki 
> > wrote:
> >
> > > Hi Madhi,
> > > Ideally it should work, can you please review the data you have
> prepared.
> > > For better understanding, please share the ContactMech,
> PartyContactMech
> > > and PartyContactMechPurpose xml data you have prepared to  run your
> > service
> > > and not getting the value.
> > >
> > > You can get that data from webtools, by direct browse to those records
> at
> > > bottom.
> > >
> > > --
> > > Rishi Solanki
> > > Sr Manager, Enterprise Software Development
> > > HotWax Systems Pvt. Ltd.
> > > Direct: +91-9893287847
> > > http://www.hotwaxsystems.com
> > > www.hotwax.co
> > >
> > >
> > > On Tue, Oct 16, 2018 at 5:38 PM Madhi Krishnan <
> > > madhi.krish...@udyogmandir.in> wrote:
> > >
> > > > Hello pritam..
> > > > I have already created the contactMech record with  ContactMechTypeId
> > as
> > > > "EMAIL_ADDRESS" and associated it with a party...
> > > > and also tried by adding  the contactMechPurpose Date...but its still
> > > > returning a null value..
> > > >
> > > >
> > > > On Tue, Oct 16, 2018 at 5:05 PM Pritam Kute <
> > > pritam.k...@hotwaxsystems.com
> > > > >
> > > > wrote:
> > > >
> > > > > Hello Madhi Krishnan,
> > > > >
> > > > > In addition to the reply from Aditya, if you don't want to add the
> > > > > ContactMechPurpose data, you just need to create the ContactMech
> > record
> > > > > with ContactMechTypeId "EMAIL_ADDRESS" or "ELECTRONIC_ADDRESS" and
> > > > > associate it with the party using PartyContactMech entity.
> > > > >
> > > > > Thanks and Regards
> > > > > --
> > > > > Pritam Kute
> > > > >
> > > > >
> > > > > On Tue, Oct 16, 2018 at 4:56 PM Madhi Krishnan <
> > > > > madhi.krish...@udyogmandir.in> wrote:
> > > > >
> > > > > > Hey Aditiya..
> > > > > > Thanks for the reply..
> > > > > > No there is no record for party id 10035
> > > > > >
> > > > > > On Tue, Oct 16, 2018 at 4:34 PM Aditya Sharma <
> > > > > > aditya.sha...@hotwaxsystems.com> wrote:
> > > > > >
> > > > > > > Hi Madhi Krishnan,
> > > > > > >
> > > > > > > Can you find records in PartyContactWithPurpose entity using
> > > webtools
> > > > > > > with contactMechPurposeTypeId as PRIMARY_EMAIL and partyId as
> > > 10035?
> > > > > > >
> > > > > > > Thanks and Regards,
> > > > > > >
> > > > > > > *Aditya Sharma* | Enterprise Software Engineer
> > > > > > > HotWax Commerce  by HotWax Systems
> > > > > > > 
> > > > > > > [image: https://www.linkedin.com/in/aditya-p-sharma/]
> > > > > > >

Re: iCalendar integration not working

2018-10-17 Thread Jyri Sillanpaa


Hello Jacques,

Actually that fixed the demo calendar but other iCalendars created are 
not accessible. They have exactly the same problem as the demo calendar had.


To reproduce, create an new iCalendar in WorkEffort (can be public or 
private), copy the resulting URL to you Lightning as you did with the 
demo calendar and continue.



Best

Jyri


On 05/10/2018 16:44, jler...@apache.org wrote:

Hi Jyri,

Thanks for your detailed report, it's fixed with 
https://issues.apache.org/jira/browse/OFBIZ-10595


So you need to apply a patch if you want to use the last R16 release

HTH

Jacques


Le 03/10/2018 à 15:26, Jyri Sillanpaa a écrit :


Hi Jacques,

Right click on Thunderbird Calendar tab's left hand side:
New Calendar -> On the Network, Next -> Location: 
https://demo-stable.ofbiz.apache.org/iCalendar/CALENDAR_PUB_DEMO/

, Next -> Name: OFBiz 16.11 Demo, Next -> Finish.
Right click the new calendar -> Synchronize Calendars.

There should be entry for STAFF_MTG Staff Meeting for Monday 01/10/18 
but it is not shown.


Try to create new calendar event and you will receive the error An 
error occurred when writing to the calendar (it will not even ask 
username and password).



Best

Jyri

On 03/10/2018 14:49, Jacques Le Roux wrote:

Hi Jyri,

In order to easily reproduce, please give us more details (exact 
steps) on how you


    "copied the DEMO iCalendar URL and pasted it to Lightning's new 
calendar creation window."


Note: I use Thunderbird and have the Lightning addon installed

Thanks

Jacques


Le 03/10/2018 à 12:08, Jyri Sillanpaa a écrit :

Hello Jacques,

Sorry to hear about that.


Your help is greatly appreciated!


Thanks

Jyri

On 03/10/2018 11:53, Jacques Le Roux wrote:

Hi Jyri,

Unfortunately the specialist on this question (Adrian Crum) passed 
away in end of , hence no answer since you asked


Nevertheless, I'll have a look ASAP...

Cheers

Jacques


Le 27/09/2018 à 11:26, Jyri Sillanpaa a écrit :

Hello,

I am trying to access the OFBiz iCalendar with Thunderbird 
Lightning so I set up 16.11.04 and loaded demo data, copied the 
DEMO iCalendar URL and pasted it to Lightning's new calendar 
creation window.


I see no the calendar entries in the new calendar in Lightning and 
when I try to create new entry I get an error message with Error 
code MODIFICATION_FAILED(user name and password are not asked at 
all) and the calendar is put on read only mode.


This is what I get on the gradlew ofbiz console:

2018-09-27 11:00:20,660 |jsse-nio-8443-exec-3 |ControlFilter |I| 
[Filtered request]: /iCalendar/CALENDAR_PUB_DEMO/ --> /control/main
2018-09-27 11:00:20,715 |sse-nio-8443-exec-10 
|ControlEventListener     |I| Creating session:  hidden sessionId 
by default.
2018-09-27 11:00:20,716 |sse-nio-8443-exec-10 
|ICalHandlerFactory |I| [GetHandler] starting request
2018-09-27 11:00:20,716 |sse-nio-8443-exec-10 |ICalWorker |I| 
[handleGetRequest] workEffortId = control
2018-09-27 11:00:20,716 |sse-nio-8443-exec-10 |ICalConverter |I| 
WorkEffort calendar is not published: control
2018-09-27 11:00:20,716 |sse-nio-8443-exec-10 
|ICalHandlerFactory |I| [GetHandler] finished request
2018-09-27 11:00:20,716 |sse-nio-8443-exec-10 
|ControlEventListener     |W| Could not find visit value object in 
session [ hidden sessionId by default.] that is being destroyed
2018-09-27 11:00:20,716 |sse-nio-8443-exec-10 
|ControlEventListener     |I| Destroying session:  hidden 
sessionId by default.



I tried with the latest trunk and have the same problem (the 
online demos for the trunk and 16.11 also have the same problem).


The online demo of 13.07 works as expected as well as the 13.07.03 
I downloaded.


Is this an configuration issue or has the iCalendar integration 
been broken?



Best regards

Jyri












--
Jyri Sillanpää

Aginion Spain
Av. d'Icaria 155, 1-2
08005 Barcelona
Spain

Re: Delivery schedules for product categories

2018-10-17 Thread Wolfgang Paul Rauchholz

Thank you Rishi,

I tried t Catalog option too, but it poses the same challenges I cannot
overcome which is to define a delivery schedule (from...to) for each
category (or catalog)
Products from Category 1 can only be delivered in week from Oct 22 - 28
Products from Category 2 can only be delivered in week from Oct 29 - Nov 4
Products from Category 3 can only be delivered in week from Nov 5 - Nov 11
etc...

Or am I missing something?

Wolfgang


On Wed, Oct 17, 2018 at 2:01 PM Rishi Solanki 
wrote:

> Two ways to achieve this;
> Setup Catalog for each week and configure them in ProductStoreCatalog.
> And as per your approach use ProductCategoryRollup for the same.
>
> Refer OrderDemoData.xml to understand it better.
>
> Best Regards,
> --
> Rishi Solanki
> Sr Manager, Enterprise Software Development
> HotWax Systems Pvt. Ltd.
> Direct: +91-9893287847
> http://www.hotwaxsystems.com
> www.hotwax.co
>
>
> On Wed, Oct 17, 2018 at 2:29 PM wp.rauchh...@gmail.com <
> wp.rauchh...@gmail.com> wrote:
>
> > After testing with ofbiz, I need advice from experts if the following is
> > possible.
> >
> > Background:
> > We need to show in e-Commerce a schedule of parts in weekly buckets for
> > the next six weeks. I use categories for this. Example
> > •   Product Category Name: Products week 42: 15/10 – 21/10
> > •   Product Category Name: Products week 43: 22/10 – 28/10
> > •   Product Category Name: Products week 44: 29/10 – 4/11
> > •   Product Category Name: Products week 45: 5/11 – 11/11
> >
> > The customer can order products in any of these weeks; but these will
> also
> > be delivered only in that same week.
> > I set the THROUGH DATE in Category Roll-up to the end of each
> > corresponding week (21/10, 28/10, etc..). The category will disappear
> once
> > this date is passed. This is what we need.
> >
> > Challenge:
> > I have not been able to define for product categories delivery valid
> dates
> > from – to. If a customer enters an order e.g. for wk 44, he/she can
> enter a
> > deliver for another week.
> >
> > Thanks for your insight. Wolfgang
> >
> >
>


-- 

Wolfgang Rauchholz

Re: Delivery schedules for product categories

2018-10-17 Thread Rishi Solanki

Two ways to achieve this;
Setup Catalog for each week and configure them in ProductStoreCatalog.
And as per your approach use ProductCategoryRollup for the same.

Refer OrderDemoData.xml to understand it better.

Best Regards,
--
Rishi Solanki
Sr Manager, Enterprise Software Development
HotWax Systems Pvt. Ltd.
Direct: +91-9893287847
http://www.hotwaxsystems.com
www.hotwax.co


On Wed, Oct 17, 2018 at 2:29 PM wp.rauchh...@gmail.com <
wp.rauchh...@gmail.com> wrote:

> After testing with ofbiz, I need advice from experts if the following is
> possible.
>
> Background:
> We need to show in e-Commerce a schedule of parts in weekly buckets for
> the next six weeks. I use categories for this. Example
> •   Product Category Name: Products week 42: 15/10 – 21/10
> •   Product Category Name: Products week 43: 22/10 – 28/10
> •   Product Category Name: Products week 44: 29/10 – 4/11
> •   Product Category Name: Products week 45: 5/11 – 11/11
>
> The customer can order products in any of these weeks; but these will also
> be delivered only in that same week.
> I set the THROUGH DATE in Category Roll-up to the end of each
> corresponding week (21/10, 28/10, etc..). The category will disappear once
> this date is passed. This is what we need.
>
> Challenge:
> I have not been able to define for product categories delivery valid dates
> from – to. If a customer enters an order e.g. for wk 44, he/she can enter a
> deliver for another week.
>
> Thanks for your insight. Wolfgang
>
>

Re: Not able to gthiet the email address..

2018-10-17 Thread Rishi Solanki

Hi Madhi,
I have loaded the data you provided in email over demo trunk [1] and able
to run the getPartyEmail service successfully.
You must did something wrong in your code, and I guess what Aditya noticed
partyId as 10035 is hardcoded in your code, which should be problem at your
end.

[1]
https://demo-trunk.ofbiz.apache.org/webtools/control/setSyncServiceParameters?SERVICE_NAME=getPartyEmail_NAME=pool&_RUN_SYNC_=Y

Follow the link and provide partyId as Pawan66 you shared, you will get the
service result. Usually, this kind of error in your own code can be rectify
by logging into the code.

Regards,
--
Rishi Solanki
Sr Manager, Enterprise Software Development
HotWax Systems Pvt. Ltd.
Direct: +91-9893287847iu
http://www.hotwaxsystems.com
www.hotwax.co


On Tue, Oct 16, 2018 at 6:19 PM Madhi Krishnan <
madhi.krish...@udyogmandir.in> wrote:

> Hey Rishi..
> Here the partyId is Pawan66...
>
> The PartyContactMech definitation :-
> 
>  createdStamp="2018-10-16 16:58:00.38" createdTxStamp="2018-10-16
> 16:57:59.935" fromDate="2018-10-16 16:58:00.379"
> lastUpdatedStamp="2018-10-16 16:58:00.38" lastUpdatedTxStamp="2018-10-16
> 16:57:59.935" partyId="Pawan66"/> 
>
> ContactMech : -
>   contactMechId="10080" contactMechTypeId="EMAIL_ADDRESS"
> createdStamp="2018-10-16 16:58:00.259" createdTxStamp="2018-10-16
> 16:57:59.935" infoString="primaryem...@gmail.com"
> lastUpdatedStamp="2018-10-16 16:58:00.259" lastUpdatedTxStamp="2018-10-16
> 16:57:59.935"/> 
>
> PartyContactMechPurpose : -
> 
>  contactMechPurposeTypeId="PRIMARY_EMAIL" createdStamp="2018-10-16
> 16:58:06.382" createdTxStamp="2018-10-16 16:58:06.373" fromDate="2018-10-16
> 16:58:06.382" lastUpdatedStamp="2018-10-16 16:58:06.382"
> lastUpdatedTxStamp="2018-10-16 16:58:06.373" partyId="Pawan66"/>
> 
>
> On Tue, Oct 16, 2018 at 6:00 PM Rishi Solanki 
> wrote:
>
> > Hi Madhi,
> > Ideally it should work, can you please review the data you have prepared.
> > For better understanding, please share the ContactMech, PartyContactMech
> > and PartyContactMechPurpose xml data you have prepared to  run your
> service
> > and not getting the value.
> >
> > You can get that data from webtools, by direct browse to those records at
> > bottom.
> >
> > --
> > Rishi Solanki
> > Sr Manager, Enterprise Software Development
> > HotWax Systems Pvt. Ltd.
> > Direct: +91-9893287847
> > http://www.hotwaxsystems.com
> > www.hotwax.co
> >
> >
> > On Tue, Oct 16, 2018 at 5:38 PM Madhi Krishnan <
> > madhi.krish...@udyogmandir.in> wrote:
> >
> > > Hello pritam..
> > > I have already created the contactMech record with  ContactMechTypeId
> as
> > > "EMAIL_ADDRESS" and associated it with a party...
> > > and also tried by adding  the contactMechPurpose Date...but its still
> > > returning a null value..
> > >
> > >
> > > On Tue, Oct 16, 2018 at 5:05 PM Pritam Kute <
> > pritam.k...@hotwaxsystems.com
> > > >
> > > wrote:
> > >
> > > > Hello Madhi Krishnan,
> > > >
> > > > In addition to the reply from Aditya, if you don't want to add the
> > > > ContactMechPurpose data, you just need to create the ContactMech
> record
> > > > with ContactMechTypeId "EMAIL_ADDRESS" or "ELECTRONIC_ADDRESS" and
> > > > associate it with the party using PartyContactMech entity.
> > > >
> > > > Thanks and Regards
> > > > --
> > > > Pritam Kute
> > > >
> > > >
> > > > On Tue, Oct 16, 2018 at 4:56 PM Madhi Krishnan <
> > > > madhi.krish...@udyogmandir.in> wrote:
> > > >
> > > > > Hey Aditiya..
> > > > > Thanks for the reply..
> > > > > No there is no record for party id 10035
> > > > >
> > > > > On Tue, Oct 16, 2018 at 4:34 PM Aditya Sharma <
> > > > > aditya.sha...@hotwaxsystems.com> wrote:
> > > > >
> > > > > > Hi Madhi Krishnan,
> > > > > >
> > > > > > Can you find records in PartyContactWithPurpose entity using
> > webtools
> > > > > > with contactMechPurposeTypeId as PRIMARY_EMAIL and partyId as
> > 10035?
> > > > > >
> > > > > > Thanks and Regards,
> > > > > >
> > > > > > *Aditya Sharma* | Enterprise Software Engineer
> > > > > > HotWax Commerce  by HotWax Systems
> > > > > > 
> > > > > > [image: https://www.linkedin.com/in/aditya-p-sharma/]
> > > > > > 
> > > > > >
> > > > > >
> > > > > > On Tue, Oct 16, 2018 at 3:36 PM Madhi Krishnan <
> > > > > > madhi.krish...@udyogmandir.in> wrote:
> > > > > >
> > > > > > > Hey all..
> > > > > > > Can anyone please help he to solve this below..
> > > > > > >
> > > > > > > public static Map getEmail(DispatchContext
> > > > > > ctx,Map > > > > > > extends Object> context) throws GenericEntityException,
> > > SQLException,
> > > > > > > GenericServiceException{
> > > > > > > LocalDispatcher dispatcher=ctx.getDispatcher();
> > > > > > > Map successResult=ServiceUtil.returnSuccess();
> > > > > > > String partyId="10035";
> > > > > > > Map input=UtilMisc.toMap("partyId",partyId);
> > > > > > > Map
> > > serviceResult=dispatcher.runSync("getPartyEmail",
> > > >

Re: Credit Card payment service

2018-10-17 Thread Wolfgang Paul Rauchholz

Thank you

Wolfgang

On Wed, Oct 17, 2018 at 10:26 AM Pierre Smits 
wrote:

> Hi Wolfgang,
>
> There are many more 3rd party fintech integrations. You can find a overview
> of what is available OOTB at [1]. Please be aware that some are not
> working.
>
> I have also created a 3rd party fintech integration for Multisafepay [2]
> back in 2015, which is publicly available via [3]. And currently I am
> working on another integration for [4] that I hope to be able to make
> available soon.
>
> [1]
>
> https://svn.apache.org/viewvc/ofbiz/ofbiz-framework/trunk/applications/accounting/src/main/java/org/apache/ofbiz/accounting/thirdparty/
> [2] https://www.multisafepay.com/es_es/
> [3] https://github.com/orrtiz/omultisafepay
> [4] https://www.adyen.com
>
> Best regards,
>
> Pierre Smits
>
> *Apache Trafodion , Vice President*
> *Apache Directory , PMC Member*
> Apache Incubator , committer
> *Apache OFBiz , contributor (without privileges)
> since 2008*
> Apache Steve , committer
>
>
> On Wed, Oct 17, 2018 at 8:53 AM wp.rauchh...@gmail.com <
> wp.rauchh...@gmail.com> wrote:
>
> > I found these providers are in the manual. Are they all tested and all
> > working with ofbiz?
> > CyberSource
> > ClearCommerce.
> > PCCharge.
> > RiTA
> > Verisign PayFlo Pro
> > ValueLink (gift cards)
> >
> > Are there others?
> >
> > Wolfgang
> >
>


-- 

Wolfgang Rauchholz

Delivery schedules for product categories

2018-10-17 Thread wp . rauchholz

After testing with ofbiz, I need advice from experts if the following is 
possible.

Background:
We need to show in e-Commerce a schedule of parts in weekly buckets for the 
next six weeks. I use categories for this. Example
•   Product Category Name: Products week 42: 15/10 – 21/10
•   Product Category Name: Products week 43: 22/10 – 28/10
•   Product Category Name: Products week 44: 29/10 – 4/11
•   Product Category Name: Products week 45: 5/11 – 11/11

The customer can order products in any of these weeks; but these will also be 
delivered only in that same week.
I set the THROUGH DATE in Category Roll-up to the end of each corresponding 
week (21/10, 28/10, etc..). The category will disappear once this date is 
passed. This is what we need.

Challenge:
I have not been able to define for product categories delivery valid dates from 
– to. If a customer enters an order e.g. for wk 44, he/she can enter a deliver 
for another week.

Thanks for your insight. Wolfgang

Re: Credit Card payment service

2018-10-17 Thread Pierre Smits

Hi Wolfgang,

There are many more 3rd party fintech integrations. You can find a overview
of what is available OOTB at [1]. Please be aware that some are not
working.

I have also created a 3rd party fintech integration for Multisafepay [2]
back in 2015, which is publicly available via [3]. And currently I am
working on another integration for [4] that I hope to be able to make
available soon.

[1]
https://svn.apache.org/viewvc/ofbiz/ofbiz-framework/trunk/applications/accounting/src/main/java/org/apache/ofbiz/accounting/thirdparty/
[2] https://www.multisafepay.com/es_es/
[3] https://github.com/orrtiz/omultisafepay
[4] https://www.adyen.com

Best regards,

Pierre Smits

*Apache Trafodion , Vice President*
*Apache Directory , PMC Member*
Apache Incubator , committer
*Apache OFBiz , contributor (without privileges)
since 2008*
Apache Steve , committer

On Wed, Oct 17, 2018 at 8:53 AM wp.rauchh...@gmail.com <
wp.rauchh...@gmail.com> wrote:

> I found these providers are in the manual. Are they all tested and all
> working with ofbiz?
> CyberSource
> ClearCommerce.
> PCCharge.
> RiTA
> Verisign PayFlo Pro
> ValueLink (gift cards)
>
> Are there others?
>
> Wolfgang
>

Credit Card payment service

2018-10-17 Thread wp . rauchholz

I found these providers are in the manual. Are they all tested and all working 
with ofbiz?
CyberSource
ClearCommerce.
PCCharge.
RiTA
Verisign PayFlo Pro
ValueLink (gift cards) 

Are there others?

Wolfgang

Re: Not able to gthiet the email address..

Re: iCalendar integration not working

Re: Delivery schedules for product categories

Re: Delivery schedules for product categories

Re: Not able to gthiet the email address..

Re: Credit Card payment service

Delivery schedules for product categories

Re: Credit Card payment service

Credit Card payment service

9 matches

Site Navigation

Mail list logo

Footer information