Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Fri, Jul 22, 2011 at 8:09 AM, Sepherosa Ziehau sepher...@gmail.com wrote: Please try this patch: http://leaf.dragonflybsd.org/~sephe/0001-ioapic-Don-t-do-the-default-IRQ-configure-if-it-is-m.patch In addition to the above patch, apply following patch too: http://leaf.dragonflybsd.org/~sephe/0002-ioapic-Disable-unused-GSI-instead-of-leaving-it-in-u.patch Best Regards, sephe Yes I am on 2.11-DEVELOPMENT DragonFly v2.11.0.571.g19cfb-DEVELOPMENT #38: Fri Jul 22 12:54:28 IST 2011 now. I guess if I git pull in my /usr/src now i will lose this patch right? Do you need a dmesg or something to verify? thanks a lot :-) --Siju
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Fri, Jul 22, 2011 at 4:19 PM, Siju George sgeorge...@gmail.com wrote: On Fri, Jul 22, 2011 at 8:09 AM, Sepherosa Ziehau sepher...@gmail.com wrote: Please try this patch: http://leaf.dragonflybsd.org/~sephe/0001-ioapic-Don-t-do-the-default-IRQ-configure-if-it-is-m.patch In addition to the above patch, apply following patch too: http://leaf.dragonflybsd.org/~sephe/0002-ioapic-Disable-unused-GSI-instead-of-leaving-it-in-u.patch Best Regards, sephe Yes I am on 2.11-DEVELOPMENT DragonFly v2.11.0.571.g19cfb-DEVELOPMENT #38: Fri Jul 22 12:54:28 IST 2011 now. I guess if I git pull in my /usr/src now i will lose this patch right? So do you mean these two patches work or? Do you need a dmesg or something to verify? Yeah, boot verbose dmesg will be helpful. thanks a lot :-) Thank you for testing. Best Regards, sephe -- Tomorrow Will Never Die
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Fri, Jul 22, 2011 at 2:01 PM, Sepherosa Ziehau sepher...@gmail.com wrote: So do you mean these two patches work or? Yep they work perfectly. System has been running it for more than 30 mins without any probs now. Yeah, boot verbose dmesg will be helpful. DragonFly v2.11.0.571.g19cfb-DEVELOPMENT #38: Fri Jul 22 12:54:28 IST 2011 root@dfly-bkpsrv.hifxnx.local:/usr/obj/usr/src/sys/GENERIC Calibrating clock(s) ... TSC clock: 2193626842 Hz, i8254 clock: 1193188 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD Athlon(tm) 64 Processor 3400+ (2193.63-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x20ff2 Stepping = 2 Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow! AMD Features2=0x1LAHF Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative WARNING: This architecture revision has known SMP hardware bugs which may cause random instability real memory = 2113336320 (2015 MB) Physical memory chunk(s): 0x1000 - 0x0009efff, 647168 bytes (158 pages) 0x00a65000 - 0x7dfa, 2102702080 bytes (513355 pages) avail memory = 2029076480 (1935 MB) ACPI MADT: LAPIC address 0xfee0, flags 0x1 ACPI MADT: BSP apic id 0 ACPI MADT: cpu id 1, apic id 0 lapic: divisor index 0, frequency 99710294 Hz SMP: CPU0 apic_initialize(): lint0: 0x00010700 lint1: 0x0400 TPR: 0x SVR: 0x01ff SMI Frequency (worst case): 32258 Hz (31 us) SMP: Waiting APs LAPIC initialization ACPI MADT: warning invalid intsrc irq 9 trig, level ACPI MADT: warning invalid intsrc irq 9 pola, low ACPI MADT: IOAPIC addr 0xfec0, apic id 1, gsi base 0 ACPI MADT: INTSRC irq 0 - gsi 2 edge/high ACPI MADT: INTSRC irq 9 - gsi 21 edge/high IOAPIC: idx 0, apic id 1, gsi base 0, npin 24 IOAPIC: irq 1 - gsi 1 edge/high IOAPIC: irq 0 - gsi 2 edge/high IOAPIC: irq 3 - gsi 3 edge/high IOAPIC: irq 4 - gsi 4 edge/high IOAPIC: irq 5 - gsi 5 edge/high IOAPIC: irq 6 - gsi 6 edge/high IOAPIC: irq 7 - gsi 7 edge/high IOAPIC: irq 8 - gsi 8 edge/high IOAPIC: irq 10 - gsi 10 edge/high IOAPIC: irq 11 - gsi 11 edge/high IOAPIC: irq 12 - gsi 12 edge/high IOAPIC: irq 13 - gsi 13 edge/high IOAPIC: irq 14 - gsi 14 edge/high IOAPIC: irq 15 - gsi 15 edge/high IOAPIC: irq 16 - gsi 16 level/low IOAPIC: irq 17 - gsi 17 level/low IOAPIC: irq 18 - gsi 18 level/low IOAPIC: irq 19 - gsi 19 level/low IOAPIC: irq 20 - gsi 20 level/low IOAPIC: irq 9 - gsi 21 edge/high IOAPIC: irq 22 - gsi 22 level/low IOAPIC: irq 23 - gsi 23 level/low IOAPIC: irq 2 reserved ELCR Found. ISA IRQs programmed as: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E E E E L L E E E E L L E E E E MPTABLE: 0:20 INTA - IOAPIC 0.16 MPTABLE: 0:18 INTA - IOAPIC 0.22 MPTABLE: 0:17 INTA - IOAPIC 0.23 MPTABLE: 0:19 INTA - IOAPIC 0.19 MPTABLE: 1:5 INTA - IOAPIC 0.17 MPTABLE: 2:0 INTA - IOAPIC 0.20 MPTABLE: 2:3 INTA - IOAPIC 0.20 Finish MP startup Active CPU Mask: 0001 bios32: Found BIOS32 Service Directory header at 0xc00f bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x31 pnpbios: Found PnP BIOS data at 0xc00f5860 pnpbios: Entry = f:664a Rev = 1.0 Other BIOS signatures found: ndepotmags=438 x mag_cap=128 for mbuf ndepotmags=4 x mag_cap=33 for mbuf pkt hdr ndepotmags=27 x mag_cap=128 for cluster mbuf ndepotmags=27 x mag_cap=128 for jcluster mbuf ndepotmags=27 x mag_cap=128 for mbuf + cluster ndepotmags=4 x mag_cap=33 for mbuf pkt hdr + cluster ndepotmags=27 x mag_cap=128 for mbuf + jcluster ndepotmags=4 x mag_cap=17 for mbuf pkt hdr + jcluster ndepotmags=4 x mag_cap=33 for lwbuf ndepotmags=4 x mag_cap=33 for sf_buf ndepotmags=3 x mag_cap=4 for exec-args ndepotmags=4 x mag_cap=33 for CCMS Preloaded elf kernel kernel at 0xc0a36000. Preloaded elf module acpi.ko at 0xc0a361f4. Preloaded elf module ahci.ko at 0xc0a36290. Preloaded elf module ehci.ko at 0xc0a3632c. module_register: module pci/ahci already exists! Module pci/ahci failed to register: 17 start scheduler helpers on cpus: 0 start dummy scheduler helpers on cpus: 0 ndepotmags=4 x mag_cap=9 for thread ndepotmags=4 x mag_cap=33 for dsched-tdio-cache ndepotmags=4 x mag_cap=33 for dsched-tdctx-cache ndepotmags=4 x mag_cap=33 for dsched-diskctx-cache ndepotmags=4 x mag_cap=9 for vmspace ndepotmags=4 x mag_cap=33 for devfs-node-cache ndepotmags=4 x mag_cap=33 for devfs-msg-cache ndepotmags=4 x mag_cap=33 for devfs-dev-cache ndepotmags=4 x mag_cap=33 for disk-msg-cache FQ scheduler policy version 1.0 loaded ndepotmags=4 x
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Fri, Jul 22, 2011 at 4:41 PM, Siju George sgeorge...@gmail.com wrote: On Fri, Jul 22, 2011 at 2:01 PM, Sepherosa Ziehau sepher...@gmail.com wrote: So do you mean these two patches work or? Yep they work perfectly. System has been running it for more than 30 mins without any probs now. Fixes have been pushed to the latest master, thanks for reporting! Best Regards, sephe -- Tomorrow Will Never Die
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Thu, Jul 21, 2011 at 3:43 PM, Siju George sgeorge...@gmail.com wrote: Hi, dfly-bkpsrv# git describe v2.11.0-568-gf1c1aea Upgrade to the above puts me to the ddb prompt while reboot on i386. And Please post following information: acpidump -t enable boot_versbose and post the dmesg before the panic. Thanks, sephe db call dumpsys Symbol not found. This is what is on screen. lapic: divisor index 0, freequency 99710124 Hz SMI Freequency ( worst case ): 32258 Hz ( 31 us ) panic:assertion:map - im_type == IOAPIC_IMT_UNUSED im ioapic_abi_set_irqmap CPUID 0 trace begining at frame 0xc0a61cf4 (null) ( ,0,c067fb7b,c0a61d28,c07caaa0 ) at 0xc036dcfd (null) ( c067fb7b,c0700404,c067b8a1,2,2 ) at 0xc036dcfd (null) ( 9,15,1,1,5f174ac ) at 0xc0616b76 (null) ( 0,a5dc00,a5dc00,a6d000,a6d000 ) at 0xc0616382 (null) ( a5d000,0,0,0,0 ) at 0xc0342fc0 (null) () at 0xc0161cfb Debugger (panic) CPU0 Stopping CPUs: 0x stopped Stopped at 0xc0607c02: movb $0,0xc088b254 === booting from old kernel for the time being Thanks --Siju -- Tomorrow Will Never Die
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Thu, Jul 21, 2011 at 5:41 PM, Sepherosa Ziehau sepher...@gmail.com wrote: On Thu, Jul 21, 2011 at 3:43 PM, Siju George sgeorge...@gmail.com wrote: Hi, dfly-bkpsrv# git describe v2.11.0-568-gf1c1aea Upgrade to the above puts me to the ddb prompt while reboot on i386. And Hmm, make sure that you have done a full buildkernel instead of quickkernel Please post following information: acpidump -t enable boot_versbose and post the dmesg before the panic. Thanks, sephe db call dumpsys Symbol not found. This is what is on screen. lapic: divisor index 0, freequency 99710124 Hz SMI Freequency ( worst case ): 32258 Hz ( 31 us ) panic:assertion:map - im_type == IOAPIC_IMT_UNUSED im ioapic_abi_set_irqmap CPUID 0 trace begining at frame 0xc0a61cf4 (null) ( ,0,c067fb7b,c0a61d28,c07caaa0 ) at 0xc036dcfd (null) ( c067fb7b,c0700404,c067b8a1,2,2 ) at 0xc036dcfd (null) ( 9,15,1,1,5f174ac ) at 0xc0616b76 (null) ( 0,a5dc00,a5dc00,a6d000,a6d000 ) at 0xc0616382 (null) ( a5d000,0,0,0,0 ) at 0xc0342fc0 (null) () at 0xc0161cfb Debugger (panic) CPU0 Stopping CPUs: 0x stopped Stopped at 0xc0607c02: movb $0,0xc088b254 === booting from old kernel for the time being Thanks --Siju -- Tomorrow Will Never Die -- Tomorrow Will Never Die
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Thu, Jul 21, 2011 at 3:13 PM, Sepherosa Ziehau sepher...@gmail.com wrote:
Hmm, make sure that you have done a full buildkernel instead of quickkernel
Yes I always do a full buildkernel :-)
Please post following information:
acpidump -t
dfly-bkpsrv# acpidump -t
/*
RSD PTR: OEM=ACPIAM, ACPI_Rev=1.0x (0)
RSDT=0x7dfd, cksum=188
*/
/*
RSDT: Length=52, Revision=1, Checksum=141,
OEMID=A M I, OEM Table ID=OEMRSDT, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Entries={ 0x7dfd0200, 0x7dfd0390, 0x7dfd03f0, 0x7dfde040 }
*/
/*
FACP: Length=132, Revision=2, Checksum=82,
OEMID=A M I, OEM Table ID=OEMFACP, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
FACS=0x7dfde000, DSDT=0x7dfd0430
INT_MODEL=APIC
Preferred_PM_Profile=Unspecified (0)
SCI_INT=9
SMI_CMD=0xb0, ACPI_ENABLE=0xe1, ACPI_DISABLE=0x1e, S4BIOS_REQ=0x0
PSTATE_CNT=0xe2
PM1a_EVT_BLK=0x800-0x803
PM1a_CNT_BLK=0x804-0x805
PM2_CNT_BLK=0x880-0x880
PM_TMR_BLK=0x808-0x80b
GPE0_BLK=0x820-0x827
P_LVL2_LAT=101 us, P_LVL3_LAT=1001 us
FLUSH_SIZE=1024, FLUSH_STRIDE=16
DUTY_OFFSET=4, DUTY_WIDTH=3
DAY_ALRM=13, MON_ALRM=0, CENTURY=0
IAPC_BOOT_ARCH={LEGACY_DEV,8042}
Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4,TMR_VAL_EXT}
*/
/*
FACS: Length=64, HwSig=0x, Firm_Wake_Vec=0x
Global_Lock=
Flags=
Version=1
*/
/*
DSDT: Length=14964, Revision=1, Checksum=105,
OEMID=1ABZR, OEM Table ID=1ABZRB49, OEM Revision=0xb49,
Creator ID=INTL, Creator Revision=0x2002026
*/
/*
APIC: Length=92, Revision=1, Checksum=174,
OEMID=A M I, OEM Table ID=OEMAPIC, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Local APIC ADDR=0xfee0
Flags={PC-AT}
Type=Local APIC
ACPI CPU=1
Flags={ENABLED}
APIC ID=0
Type=Local APIC
ACPI CPU=2
Flags={DISABLED}
APIC ID=129
Type=IO APIC
APIC ID=1
INT BASE=0
ADDR=0xfec0
Type=INT Override
BUS=0
IRQ=0
INTR=2
Flags={Polarity=conforming, Trigger=conforming}
Type=INT Override
BUS=0
IRQ=9
INTR=21
Flags={Polarity=active-lo, Trigger=level}
*/
/*
MCFG: Length=60, Revision=1, Checksum=118,
OEMID=A M I, OEM Table ID=OEMMCFG, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Base Address= 0xe000
Segment Group= 0x
Start Bus= 0
End Bus= 255
*/
acpidump: RSDT entry 3 (sig OEMB) is corrupt
dfly-bkpsrv#
enable boot_versbose and post the dmesg before the panic
Copyright (c) 2003-2011 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
Slab ZoneSize set to 128KB
Leaving critical section, allowing interrupts
ACPI SDT: RSDP in BIOS mem
ACPI FADT: SCI irq 9, conform/conform
DragonFly v2.11.0.247.gda17d9-DEVELOPMENT #36: Mon May 23 12:57:37 IST 2011
root@dfly-bkpsrv.hifxnx.local:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2193650213 Hz, i8254 clock: 1193201 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) 64 Processor 3400+ (2193.63-MHz 686-class CPU)
Origin = AuthenticAMD Id = 0x20ff2 Stepping = 2
Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2
Features2=0x1SSE3
AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!
AMD Features2=0x1LAHF
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
WARNING: This architecture revision has known SMP hardware bugs which
may cause random instability
real memory = 2113336320 (2015 MB)
Physical memory chunk(s):
0x1000 - 0x0009efff, 647168 bytes (158 pages)
0x009fd000 - 0x7dfa, 2103128064 bytes (513459 pages)
avail memory = 2029371392 (1935 MB)
ELCR Found. ISA IRQs programmed as:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
E E E E L L E E E E L L E E E E
bios32: Found BIOS32 Service Directory header at 0xc00f
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x31
pnpbios: Found PnP BIOS data at 0xc00f5860
pnpbios: Entry = f:664a Rev = 1.0
Other BIOS signatures found:
ndepotmags=438 x mag_cap=128 for mbuf
ndepotmags=4 x mag_cap=33 for mbuf pkt
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Thu, Jul 21, 2011 at 6:47 PM, Siju George sgeorge...@gmail.com wrote:
On Thu, Jul 21, 2011 at 3:13 PM, Sepherosa Ziehau sepher...@gmail.com wrote:
Hmm, make sure that you have done a full buildkernel instead of quickkernel
Yes I always do a full buildkernel :-)
Please post following information:
acpidump -t
dfly-bkpsrv# acpidump -t
/*
RSD PTR: OEM=ACPIAM, ACPI_Rev=1.0x (0)
RSDT=0x7dfd, cksum=188
*/
/*
RSDT: Length=52, Revision=1, Checksum=141,
OEMID=A M I, OEM Table ID=OEMRSDT, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Entries={ 0x7dfd0200, 0x7dfd0390, 0x7dfd03f0, 0x7dfde040 }
*/
/*
FACP: Length=132, Revision=2, Checksum=82,
OEMID=A M I, OEM Table ID=OEMFACP, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
FACS=0x7dfde000, DSDT=0x7dfd0430
INT_MODEL=APIC
Preferred_PM_Profile=Unspecified (0)
SCI_INT=9
SMI_CMD=0xb0, ACPI_ENABLE=0xe1, ACPI_DISABLE=0x1e, S4BIOS_REQ=0x0
PSTATE_CNT=0xe2
PM1a_EVT_BLK=0x800-0x803
PM1a_CNT_BLK=0x804-0x805
PM2_CNT_BLK=0x880-0x880
PM_TMR_BLK=0x808-0x80b
GPE0_BLK=0x820-0x827
P_LVL2_LAT=101 us, P_LVL3_LAT=1001 us
FLUSH_SIZE=1024, FLUSH_STRIDE=16
DUTY_OFFSET=4, DUTY_WIDTH=3
DAY_ALRM=13, MON_ALRM=0, CENTURY=0
IAPC_BOOT_ARCH={LEGACY_DEV,8042}
Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4,TMR_VAL_EXT}
*/
/*
FACS: Length=64, HwSig=0x, Firm_Wake_Vec=0x
Global_Lock=
Flags=
Version=1
*/
/*
DSDT: Length=14964, Revision=1, Checksum=105,
OEMID=1ABZR, OEM Table ID=1ABZRB49, OEM Revision=0xb49,
Creator ID=INTL, Creator Revision=0x2002026
*/
/*
APIC: Length=92, Revision=1, Checksum=174,
OEMID=A M I, OEM Table ID=OEMAPIC, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Local APIC ADDR=0xfee0
Flags={PC-AT}
Type=Local APIC
ACPI CPU=1
Flags={ENABLED}
APIC ID=0
Type=Local APIC
ACPI CPU=2
Flags={DISABLED}
APIC ID=129
Type=IO APIC
APIC ID=1
INT BASE=0
ADDR=0xfec0
Type=INT Override
BUS=0
IRQ=0
INTR=2
Flags={Polarity=conforming, Trigger=conforming}
Type=INT Override
BUS=0
IRQ=9
INTR=21
Flags={Polarity=active-lo, Trigger=level}
*/
/*
MCFG: Length=60, Revision=1, Checksum=118,
OEMID=A M I, OEM Table ID=OEMMCFG, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Base Address= 0xe000
Segment Group= 0x
Start Bus= 0
End Bus= 255
*/
acpidump: RSDT entry 3 (sig OEMB) is corrupt
dfly-bkpsrv#
Please try this patch:
http://leaf.dragonflybsd.org/~sephe/0001-ioapic-Don-t-do-the-default-IRQ-configure-if-it-is-m.patch
Best Regards,
sephe
--
Tomorrow Will Never Die
Re: Rebbot after upgrade to v2.11.0-568-gf1c1aea puts me to the ddb prompt in i386
On Fri, Jul 22, 2011 at 10:12 AM, Sepherosa Ziehau sepher...@gmail.com wrote:
On Thu, Jul 21, 2011 at 6:47 PM, Siju George sgeorge...@gmail.com wrote:
On Thu, Jul 21, 2011 at 3:13 PM, Sepherosa Ziehau sepher...@gmail.com
wrote:
Hmm, make sure that you have done a full buildkernel instead of quickkernel
Yes I always do a full buildkernel :-)
Please post following information:
acpidump -t
dfly-bkpsrv# acpidump -t
/*
RSD PTR: OEM=ACPIAM, ACPI_Rev=1.0x (0)
RSDT=0x7dfd, cksum=188
*/
/*
RSDT: Length=52, Revision=1, Checksum=141,
OEMID=A M I, OEM Table ID=OEMRSDT, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Entries={ 0x7dfd0200, 0x7dfd0390, 0x7dfd03f0, 0x7dfde040 }
*/
/*
FACP: Length=132, Revision=2, Checksum=82,
OEMID=A M I, OEM Table ID=OEMFACP, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
FACS=0x7dfde000, DSDT=0x7dfd0430
INT_MODEL=APIC
Preferred_PM_Profile=Unspecified (0)
SCI_INT=9
SMI_CMD=0xb0, ACPI_ENABLE=0xe1, ACPI_DISABLE=0x1e, S4BIOS_REQ=0x0
PSTATE_CNT=0xe2
PM1a_EVT_BLK=0x800-0x803
PM1a_CNT_BLK=0x804-0x805
PM2_CNT_BLK=0x880-0x880
PM_TMR_BLK=0x808-0x80b
GPE0_BLK=0x820-0x827
P_LVL2_LAT=101 us, P_LVL3_LAT=1001 us
FLUSH_SIZE=1024, FLUSH_STRIDE=16
DUTY_OFFSET=4, DUTY_WIDTH=3
DAY_ALRM=13, MON_ALRM=0, CENTURY=0
IAPC_BOOT_ARCH={LEGACY_DEV,8042}
Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4,TMR_VAL_EXT}
*/
/*
FACS: Length=64, HwSig=0x, Firm_Wake_Vec=0x
Global_Lock=
Flags=
Version=1
*/
/*
DSDT: Length=14964, Revision=1, Checksum=105,
OEMID=1ABZR, OEM Table ID=1ABZRB49, OEM Revision=0xb49,
Creator ID=INTL, Creator Revision=0x2002026
*/
/*
APIC: Length=92, Revision=1, Checksum=174,
OEMID=A M I, OEM Table ID=OEMAPIC, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Local APIC ADDR=0xfee0
Flags={PC-AT}
Type=Local APIC
ACPI CPU=1
Flags={ENABLED}
APIC ID=0
Type=Local APIC
ACPI CPU=2
Flags={DISABLED}
APIC ID=129
Type=IO APIC
APIC ID=1
INT BASE=0
ADDR=0xfec0
Type=INT Override
BUS=0
IRQ=0
INTR=2
Flags={Polarity=conforming, Trigger=conforming}
Type=INT Override
BUS=0
IRQ=9
INTR=21
Flags={Polarity=active-lo, Trigger=level}
*/
/*
MCFG: Length=60, Revision=1, Checksum=118,
OEMID=A M I, OEM Table ID=OEMMCFG, OEM Revision=0x1000624,
Creator ID=MSFT, Creator Revision=0x97
Base Address= 0xe000
Segment Group= 0x
Start Bus= 0
End Bus= 255
*/
acpidump: RSDT entry 3 (sig OEMB) is corrupt
dfly-bkpsrv#
Please try this patch:
http://leaf.dragonflybsd.org/~sephe/0001-ioapic-Don-t-do-the-default-IRQ-configure-if-it-is-m.patch
In addition to the above patch, apply following patch too:
http://leaf.dragonflybsd.org/~sephe/0002-ioapic-Disable-unused-GSI-instead-of-leaving-it-in-u.patch
Best Regards,
sephe
--
Tomorrow Will Never Die
