Re: re0: watchdog timeout issue
On 03/12/2012 07:22 PM, karim.allah.ah...@gmail.com wrote: intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at */** hz, livelock removed Seen that before...number of users have reported of fixing by doing BIOS updates, switching the SATA configuation settings, booting with smp kernel. On my case i got it fix by switching from 32 bit to 64 bit dragonfly. http://leaf.dragonflybsd.org/mailarchive/users/2011-07/msg00081.html http://kerneltrap.org/mailarchive/dragonflybsd-user/2008/7/14/2460704
Re: re0: watchdog timeout issue
On Tue, Mar 13, 2012 at 1:38 PM, karim.allah.ah...@gmail.com karim.allah.ah...@gmail.com wrote: Here's the whole output of dmesg ... XMMNNOOCopyright (c) 2003-2012 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. sdt_probe: no RSDP fadt_probe: can't locate FADT madt_probe: can't locate MADT DragonFly v3.0.1-RELEASE #3: Mon Feb 20 16:41:19 MSK 2012 r...@df.v12.su:/usr/obj/home/justin/make_30/src/sys/GENERIC TSC clock: 2266498894 Hz, i8254 clock: 1193128 Hz CPU: QEMU Virtual CPU version 0.14.1 (2266.62-MHz 686-class CPU) Origin = GenuineIntel Id = 0x623 Stepping = 3 Features=0x78bfbfdFPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Features2=0x80802001SSE3,CX16,POPCNT,VMM AMD Features=0x10NX AMD Features2=0x1LAHF real memory = 1073341440 (1023 MB) avail memory = 1019428864 (972 MB) lapic: divisor index 0, frequency 55880 Hz Initialize MI interrupts FQ scheduler policy version 1.1 loaded kbd1 at kbdmux0 disk scheduler: set policy of md0 to noop md0: Malloc disk ACPI Error: A valid RSDP was not found (20110211/tbxfroot-309) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. npx0: math processor on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout cryptosoft0: software crypto on motherboard pcib0: MPTABLE Host-PCI bridge pcibus 0 on motherboard pci0: PCI bus on pcib0 isab0: PCI-ISA bridge at device 1.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX3 WDMA2 controller port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0 ata0: ATA channel 0 on atapci0 disk scheduler: set policy of ad0 to noop ad0: 40960MB QEMU HARDDISK 0.14.1 at ata0-master WDMA2 ata1: ATA channel 1 on atapci0 disk scheduler: set policy of acd0 to noop acd0: CDROM QEMU DVD-ROM/0.14.1 at ata1-master WDMA2 vgapci0: VGA-compatible display mem 0xf200-0xf2000fff,0xf000-0xf1ff at device 2.0 on pci0 re0: RealTek 8139C+ 10/100BaseTX port 0xc100-0xc1ff mem 0xf202-0xf20200ff irq 11 at device 3.0 on pci0 re0: Hardware rev. 0x7480; MAC ver. 0x00; PCI32 33MHz miibus0: MII bus on re0 ukphy0: Generic IEEE 802.3u media interface on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: MAC address: 52:54:00:12:34:56 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: can't drain, serial port might not exist, disabling ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 CAM: Configuring 2 busses CAM: finished configuring all busses disk scheduler: set policy of cd0 to noop cd0 at ata1 bus 0 target 0 lun 0 cd0: QEMU QEMU DVD-ROM 0.14 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from hammer:serno/QM1.s1d tryroot serno/QM1.s1d HAMMER(ROOT) recovery check seqno=00136a2a HAMMER(ROOT) recovery range 32d262d0-32d262d0 HAMMER(ROOT) recovery nexto 32d262d0 endseqno=00136a2b HAMMER(ROOT) mounted clean, no recovery needed DMA space used: 152k, remaining available: 16384k Mounting devfs re0: watchdog timeout intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! re0's interrupt is irq11, so it looks like re0 never considers the interrupt is for him. Would it be possible that you could change the emulated network device? Other option, set hw.ioapic_enable=0 in /boot/loader.conf I am considering disabling I/O APIC on all virtual machines. Best Regards, sephe -- Tomorrow Will Never Die
Re: re0: watchdog timeout issue
Hi Sepherosa, Disabling the I/O APIC fixed it. :) Thanks On Tue, Mar 13, 2012 at 8:36 AM, Sepherosa Ziehau sepher...@gmail.comwrote: On Tue, Mar 13, 2012 at 1:38 PM, karim.allah.ah...@gmail.com karim.allah.ah...@gmail.com wrote: Here's the whole output of dmesg ... XMMNNOOCopyright (c) 2003-2012 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. sdt_probe: no RSDP fadt_probe: can't locate FADT madt_probe: can't locate MADT DragonFly v3.0.1-RELEASE #3: Mon Feb 20 16:41:19 MSK 2012 r...@df.v12.su:/usr/obj/home/justin/make_30/src/sys/GENERIC TSC clock: 2266498894 Hz, i8254 clock: 1193128 Hz CPU: QEMU Virtual CPU version 0.14.1 (2266.62-MHz 686-class CPU) Origin = GenuineIntel Id = 0x623 Stepping = 3 Features=0x78bfbfdFPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Features2=0x80802001SSE3,CX16,POPCNT,VMM AMD Features=0x10NX AMD Features2=0x1LAHF real memory = 1073341440 (1023 MB) avail memory = 1019428864 (972 MB) lapic: divisor index 0, frequency 55880 Hz Initialize MI interrupts FQ scheduler policy version 1.1 loaded kbd1 at kbdmux0 disk scheduler: set policy of md0 to noop md0: Malloc disk ACPI Error: A valid RSDP was not found (20110211/tbxfroot-309) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. npx0: math processor on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout cryptosoft0: software crypto on motherboard pcib0: MPTABLE Host-PCI bridge pcibus 0 on motherboard pci0: PCI bus on pcib0 isab0: PCI-ISA bridge at device 1.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX3 WDMA2 controller port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0 ata0: ATA channel 0 on atapci0 disk scheduler: set policy of ad0 to noop ad0: 40960MB QEMU HARDDISK 0.14.1 at ata0-master WDMA2 ata1: ATA channel 1 on atapci0 disk scheduler: set policy of acd0 to noop acd0: CDROM QEMU DVD-ROM/0.14.1 at ata1-master WDMA2 vgapci0: VGA-compatible display mem 0xf200-0xf2000fff,0xf000-0xf1ff at device 2.0 on pci0 re0: RealTek 8139C+ 10/100BaseTX port 0xc100-0xc1ff mem 0xf202-0xf20200ff irq 11 at device 3.0 on pci0 re0: Hardware rev. 0x7480; MAC ver. 0x00; PCI32 33MHz miibus0: MII bus on re0 ukphy0: Generic IEEE 802.3u media interface on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: MAC address: 52:54:00:12:34:56 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: can't drain, serial port might not exist, disabling ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 CAM: Configuring 2 busses CAM: finished configuring all busses disk scheduler: set policy of cd0 to noop cd0 at ata1 bus 0 target 0 lun 0 cd0: QEMU QEMU DVD-ROM 0.14 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from hammer:serno/QM1.s1d tryroot serno/QM1.s1d HAMMER(ROOT) recovery check seqno=00136a2a HAMMER(ROOT) recovery range 32d262d0-32d262d0 HAMMER(ROOT) recovery nexto 32d262d0 endseqno=00136a2b HAMMER(ROOT) mounted clean, no recovery needed DMA space used: 152k, remaining available: 16384k Mounting devfs re0: watchdog timeout intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! re0's interrupt is irq11, so it looks like re0 never considers the interrupt is for him. Would it be possible that you could change the emulated network device? Other option, set hw.ioapic_enable=0 in /boot/loader.conf I am considering disabling I/O APIC on all virtual machines. Best Regards, sephe -- Tomorrow Will Never Die -- Karim Allah Ahmed. LinkedIn http://eg.linkedin.com/pub/karim-allah-ahmed/13/829/550/
re0: watchdog timeout issue
I'm getting the following message printed on my terminal and on dmesg once I configure my NIC 'ifconfig re0 10.0.2.15' re0: watchdog timeout intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at */** hz, livelock removed How can I fix that ? -- Karim Allah Ahmed. LinkedIn http://eg.linkedin.com/pub/karim-allah-ahmed/13/829/550/
Re: re0: watchdog timeout issue
On Tue, Mar 13, 2012 at 10:22 AM, karim.allah.ah...@gmail.com karim.allah.ah...@gmail.com wrote: I'm getting the following message printed on my terminal and on dmesg once I configure my NIC 'ifconfig re0 10.0.2.15' re0: watchdog timeout intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at */** hz, livelock removed How can I fix that ? Please post the verbose dmesg first. Thanks. -- Karim Allah Ahmed. LinkedIn -- Tomorrow Will Never Die
Re: re0: watchdog timeout issue
Here's the whole output of dmesg ... XMMNNOOCopyright (c) 2003-2012 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. sdt_probe: no RSDP fadt_probe: can't locate FADT madt_probe: can't locate MADT DragonFly v3.0.1-RELEASE #3: Mon Feb 20 16:41:19 MSK 2012 r...@df.v12.su:/usr/obj/home/justin/make_30/src/sys/GENERIC TSC clock: 2266498894 Hz, i8254 clock: 1193128 Hz CPU: QEMU Virtual CPU version 0.14.1 (2266.62-MHz 686-class CPU) Origin = GenuineIntel Id = 0x623 Stepping = 3 Features=0x78bfbfdFPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Features2=0x80802001SSE3,CX16,POPCNT,VMM AMD Features=0x10NX AMD Features2=0x1LAHF real memory = 1073341440 (1023 MB) avail memory = 1019428864 (972 MB) lapic: divisor index 0, frequency 55880 Hz Initialize MI interrupts FQ scheduler policy version 1.1 loaded kbd1 at kbdmux0 disk scheduler: set policy of md0 to noop md0: Malloc disk ACPI Error: A valid RSDP was not found (20110211/tbxfroot-309) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. npx0: math processor on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout cryptosoft0: software crypto on motherboard pcib0: MPTABLE Host-PCI bridge pcibus 0 on motherboard pci0: PCI bus on pcib0 isab0: PCI-ISA bridge at device 1.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX3 WDMA2 controller port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0 ata0: ATA channel 0 on atapci0 disk scheduler: set policy of ad0 to noop ad0: 40960MB QEMU HARDDISK 0.14.1 at ata0-master WDMA2 ata1: ATA channel 1 on atapci0 disk scheduler: set policy of acd0 to noop acd0: CDROM QEMU DVD-ROM/0.14.1 at ata1-master WDMA2 vgapci0: VGA-compatible display mem 0xf200-0xf2000fff,0xf000-0xf1ff at device 2.0 on pci0 re0: RealTek 8139C+ 10/100BaseTX port 0xc100-0xc1ff mem 0xf202-0xf20200ff irq 11 at device 3.0 on pci0 re0: Hardware rev. 0x7480; MAC ver. 0x00; PCI32 33MHz miibus0: MII bus on re0 ukphy0: Generic IEEE 802.3u media interface on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: MAC address: 52:54:00:12:34:56 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: can't drain, serial port might not exist, disabling ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 CAM: Configuring 2 busses CAM: finished configuring all busses disk scheduler: set policy of cd0 to noop cd0 at ata1 bus 0 target 0 lun 0 cd0: QEMU QEMU DVD-ROM 0.14 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from hammer:serno/QM1.s1d tryroot serno/QM1.s1d HAMMER(ROOT) recovery check seqno=00136a2a HAMMER(ROOT) recovery range 32d262d0-32d262d0 HAMMER(ROOT) recovery nexto 32d262d0 endseqno=00136a2b HAMMER(ROOT) mounted clean, no recovery needed DMA space used: 152k, remaining available: 16384k Mounting devfs re0: watchdog timeout intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9737/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9370/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9849/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 10127/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9955/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9831/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9669/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 9812/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit engaged! intr 11 on cpu0 at 10005/2 hz, livelock removed intr 11 on cpu0 at 40001/4 hz, livelocked limit
