Kannel needs direct access to the modem AT port (ttyACM0) if your
driver does not allow this, you are out of luck unless you develop a
middleware that will sit between kannel and your g3 card. Or maybe it
allows http access?
are you able to send sms?
add
log-file = /yourpath/modem.log
log-level=0
to your smsc-at config and post log
|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Tue, Dec 21, 2010 at 11:51 PM, parimal naigaonkar
parimal...@gmail.com wrote:
hi,
i have a 3g data card, it is detected on ttyACM0 only when i run the package
given in it for linux.
i am able to configure and use it to send messages but kannel is not able to
receive messages instead the package itself receives messages and shows pop
up.
--
output of dmesg:
[ 3199.311902] sr 4:0:0:0: [sr1] Unhandled sense code
[ 3199.311904] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 3199.311907] sr 4:0:0:0: [sr1] Sense Key : Medium Error [current]
[ 3199.311910] sr 4:0:0:0: [sr1] Add. Sense: Unrecovered read error
[ 3199.311913] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 20 ca 00 00 02
00
[ 3199.311920] end_request: I/O error, dev sr1, sector 33576
[ 3442.367533] usb 2-6: USB disconnect, address 7
[ 3442.367961] ehci_hcd :00:1d.7: dma_pool_free buffer-2048,
ed830080/2d830080 (bad dma)
[ 3442.401478] scsi 4:0:0:0: rejecting I/O to dead device
[ 3460.816207] usb 2-6: new high speed USB device using ehci_hcd and address
8
