Re: [strongSwan] Config/Install compiled strongswan

2017-03-08 Thread 吕迪 
Hi Andreas,

Looks like the charon process was somehow blocked. I reinstalled the system
and the strongswan.

Thanks,
Di


2017-03-07 20:37 GMT-08:00 Andreas Steffen :

> Hi Di,
>
> could you provide a log of the daemon's startup which would show what
> actually fails? What does "swanctl --stats" or alternatively "ipsec
> statusall" show?
>
> Regards
>
> Andreas
>
> On 08.03.2017 02:07, 吕迪 wrote:
> > Hi Andreas,
> >
> > I tried the default setup, but it's still not binding to port 500. Is
> > there any other place I should look at?
> >
> > Thanks,
> > Di
> >
> >
> > 2017-03-07 14:36 GMT-08:00 Andreas Steffen
> >  >>:
> >
> > Hi,
> >
> > selecting the --enable-all option is not a good idea. This might
> > lead to the loading of conflicting socket plugins preventing the
> > charon daemon of starting up at all.
> >
> > Couldn't you just start with the default setup
> >
> >   ./configure --prefix=/usr --sysconfdir=/etc
> >   make
> >   sudo make install
> >
> > at the outset and enabling additional desired plugins later on?
> >
> > Regards
> >
> > Andreas
> >
> > On 07.03.2017 22:58, 吕迪 wrote:
> > > Hi,
> > >
> > > I tried to compile and install a strongswan on my computer by doing
> > >
> > >> ./configure --prefix=/usr --sysconfdir=/etc --enable-all
> > >> make
> > >> sudo make install
> > > ,
> > > but the charon process is not binding to port 500 for ike when I do
> > > "sudo ipsec start".
> > >
> > > When I run "sudo lsof -i:500 -n -P", nothing shows up.
> > >
> > > Please give me some help on this, anything l missed or I should
> > configure?
> > >
> > > Thanks,
> > > Di
> >
> > 
> ==
> > Andreas Steffen
> >  andreas.stef...@strongswan.org  strongswan.org>
> > strongSwan - the Open Source VPN Solution!
> > www.strongswan.org 
> > Institute for Networked Solutions
> > HSR University of Applied Sciences Rapperswil
> > CH-8640 Rapperswil (Switzerland)
> > ===[
> INS-HSR]==
> >
> >
>
> --
> ==
> Andreas Steffen andreas.stef...@strongswan.org
> strongSwan - the Open Source VPN Solution!  www.strongswan.org
> Institute for Networked Solutions
> HSR University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ===[INS-HSR]==
>
>
___
Users mailing list
Users@lists.strongswan.org
https://lists.strongswan.org/mailman/listinfo/users

Re: [strongSwan] Config/Install compiled strongswan

2017-03-07 Thread Andreas Steffen 
Hi Di,

could you provide a log of the daemon's startup which would show what
actually fails? What does "swanctl --stats" or alternatively "ipsec
statusall" show?

Regards

Andreas

On 08.03.2017 02:07, 吕迪 wrote:
> Hi Andreas,
> 
> I tried the default setup, but it's still not binding to port 500. Is
> there any other place I should look at?
> 
> Thanks,
> Di
> 
> 
> 2017-03-07 14:36 GMT-08:00 Andreas Steffen
> >:
> 
> Hi,
> 
> selecting the --enable-all option is not a good idea. This might
> lead to the loading of conflicting socket plugins preventing the
> charon daemon of starting up at all.
> 
> Couldn't you just start with the default setup
> 
>   ./configure --prefix=/usr --sysconfdir=/etc
>   make
>   sudo make install
> 
> at the outset and enabling additional desired plugins later on?
> 
> Regards
> 
> Andreas
> 
> On 07.03.2017 22:58, 吕迪 wrote:
> > Hi,
> >
> > I tried to compile and install a strongswan on my computer by doing
> >
> >> ./configure --prefix=/usr --sysconfdir=/etc --enable-all
> >> make
> >> sudo make install
> > ,
> > but the charon process is not binding to port 500 for ike when I do
> > "sudo ipsec start".
> >
> > When I run "sudo lsof -i:500 -n -P", nothing shows up.
> >
> > Please give me some help on this, anything l missed or I should
> configure?
> >
> > Thanks,
> > Di
> 
> ==
> Andreas Steffen   
>  andreas.stef...@strongswan.org 
> strongSwan - the Open Source VPN Solution! 
> www.strongswan.org 
> Institute for Networked Solutions
> HSR University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ===[INS-HSR]==
> 
> 

-- 
==
Andreas Steffen andreas.stef...@strongswan.org
strongSwan - the Open Source VPN Solution!  www.strongswan.org
Institute for Networked Solutions
HSR University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===[INS-HSR]==



smime.p7s
Description: S/MIME Cryptographic Signature
___
Users mailing list
Users@lists.strongswan.org
https://lists.strongswan.org/mailman/listinfo/users

Re: [strongSwan] Config/Install compiled strongswan

2017-03-07 Thread 吕迪 
Hi Andreas,

I tried the default setup, but it's still not binding to port 500. Is there
any other place I should look at?

Thanks,
Di


2017-03-07 14:36 GMT-08:00 Andreas Steffen :

> Hi,
>
> selecting the --enable-all option is not a good idea. This might
> lead to the loading of conflicting socket plugins preventing the
> charon daemon of starting up at all.
>
> Couldn't you just start with the default setup
>
>   ./configure --prefix=/usr --sysconfdir=/etc
>   make
>   sudo make install
>
> at the outset and enabling additional desired plugins later on?
>
> Regards
>
> Andreas
>
> On 07.03.2017 22:58, 吕迪 wrote:
> > Hi,
> >
> > I tried to compile and install a strongswan on my computer by doing
> >
> >> ./configure --prefix=/usr --sysconfdir=/etc --enable-all
> >> make
> >> sudo make install
> > ,
> > but the charon process is not binding to port 500 for ike when I do
> > "sudo ipsec start".
> >
> > When I run "sudo lsof -i:500 -n -P", nothing shows up.
> >
> > Please give me some help on this, anything l missed or I should
> configure?
> >
> > Thanks,
> > Di
>
> ==
> Andreas Steffen andreas.stef...@strongswan.org
> strongSwan - the Open Source VPN Solution!  www.strongswan.org
> Institute for Networked Solutions
> HSR University of Applied Sciences Rapperswil
> CH-8640 Rapperswil (Switzerland)
> ===[INS-HSR]==
>
>
___
Users mailing list
Users@lists.strongswan.org
https://lists.strongswan.org/mailman/listinfo/users

Re: [strongSwan] Config/Install compiled strongswan

2017-03-07 Thread Andreas Steffen 
Hi,

selecting the --enable-all option is not a good idea. This might
lead to the loading of conflicting socket plugins preventing the
charon daemon of starting up at all.

Couldn't you just start with the default setup

  ./configure --prefix=/usr --sysconfdir=/etc
  make
  sudo make install

at the outset and enabling additional desired plugins later on?

Regards

Andreas

On 07.03.2017 22:58, 吕迪 wrote:
> Hi,
> 
> I tried to compile and install a strongswan on my computer by doing
> 
>> ./configure --prefix=/usr --sysconfdir=/etc --enable-all
>> make
>> sudo make install
> ,
> but the charon process is not binding to port 500 for ike when I do
> "sudo ipsec start".
> 
> When I run "sudo lsof -i:500 -n -P", nothing shows up.
> 
> Please give me some help on this, anything l missed or I should configure?
> 
> Thanks,
> Di

==
Andreas Steffen andreas.stef...@strongswan.org
strongSwan - the Open Source VPN Solution!  www.strongswan.org
Institute for Networked Solutions
HSR University of Applied Sciences Rapperswil
CH-8640 Rapperswil (Switzerland)
===[INS-HSR]==



smime.p7s
Description: S/MIME Cryptographic Signature
___
Users mailing list
Users@lists.strongswan.org
https://lists.strongswan.org/mailman/listinfo/users

[strongSwan] Config/Install compiled strongswan

2017-03-07 Thread 吕迪 
Hi,

I tried to compile and install a strongswan on my computer by doing

> ./configure --prefix=/usr --sysconfdir=/etc --enable-all
> make
> sudo make install
,
but the charon process is not binding to port 500 for ike when I do "sudo
ipsec start".

When I run "sudo lsof -i:500 -n -P", nothing shows up.

Please give me some help on this, anything l missed or I should configure?

Thanks,
Di
___
Users mailing list
Users@lists.strongswan.org
https://lists.strongswan.org/mailman/listinfo/users