Re: [Users] IPv6, openVZ7, CentOS7
Yes, br0 contains main server`s IPv4. So I perform tuning and now my IPv6 address pingable - but from this node only (and not on CTs on this node). This node CTs or other internet places - they do not see my IPv6. Other 2 secondary IPv6 addresses not even pingable from node. My steps: # nano -w /etc/sysconfig/network-scripts/ifcfg-br0 IPV6INIT=yes IPV6_AUTOCONF=no IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no IPV6ADDR=myIPv6IP_1 IPV6ADDR_SECONDARIES=myIPv6IP_2 myIPv6IP_3 IPV6_DEFAULTGW=myIPv6GW # nano -w /etc/sysconfig/network NETWORKING_IPV6=yes IPV6FORWARDING=yes IPV6_DEFAULTDEV=br0 IPV6_DEFAULTGW=myIPv6GW IPV6_AUTOCONF=no # echo "net.ipv6.conf.default.forwarding = 1" >> /etc/sysctl.conf # echo "net.ipv6.conf.all.forwarding = 1" >> /etc/sysctl.conf # echo "net.ipv6.conf.all.proxy_ndp = 1" >> /etc/sysctl.conf # sysctl -p # nano -w /etc/sysconfig/iptables-config IP6TABLES_MODULES="ip6_tables ip6table_filter ip6table_mangle ip6t_REJECT nf_conntrack_ipv6" # reboot -n чт, 15 груд. 2022 р. о 14:34 Arjit Chaudhary пише: > Hi, > It could be in br0 if you are bridging enp3s0f0 and/or enp3s0f1 > > Basically the interface which lists as UP and with the IPv4 information > etc should be the right one in my experience. > > But do back-up original configuration files on the system, before editing > just incase something goes wrong you can just copy them back and restart > networking. > > > On Thu, 15 Dec, 2022, 17:40 Oleksiy Tkachenko, wrote: > >> I have many) >> # ip a >> 1: lo: >> 2: enp3s0f0: >> 3: enp3s0f1: >> 4: enp0s20f0u9u2c2: >> 5: br0: >> 6: virbr0: >> 7: virbr0-nic: >> 8: venet0: >> 9: host-routed: >> 11: veth72240bcc@if3: >> 12: veth720bed05@if3: >> 13: veth7290a381@if3: >> 16: veth721813e6@if3: >> 17: veth720a338a@if3: >> 24: veth729a3460@if3: >> 25: veth720c6518@if3: >> 26: veth721bbb55@if3: >> 27: veth72705632@if3: >> 28: veth72b28dcd@if3: >> >> >> чт, 15 груд. 2022 р. о 13:52 Arjit Chaudhary пише: >> >>> Is your interface name different by chance? >>> >>> Can you check, >>> >>> > ip a >>> >>> for the actual interface name and then update that interface >>> configuration for the IPv6. >>> >>> On Thu, 15 Dec, 2022, 16:43 Oleksiy Tkachenko, >>> wrote: >>> Thank you! During node preparation I need to update "/etc/sysconfig/network-scripts/ifcfg-ethX" - but there is no such file. I also need to put "eth0" in "/etc/sysconfig/network" file - is it actual now (when I have no ethX file)? I also need to "Add 'ipt_state' to IPTABLES and 'nf_conntrack_ipv6' to IP6TABLES" in "/etc/vz.conf" - there is no such file also. I have "/etc/vz/vz.conf" on my bare metal openvz7 but there is no "IPTABLES" or "IP6TABLES" mention at all. чт, 15 груд. 2022 р. о 02:03 Arjit Chaudhary пише: > (In my experience) > > Does the host-node have working IPv6 configured on it? If yes, > > Then you can just do, > > vzctl set --ipadd -- save > > and the container too will have working IPv6. > > If the host-node does not have working IPv6, then you can just > configure any address of the IPv6 range on the host-node > > > On Thu, Dec 15, 2022 at 4:15 AM UNLIM.SRV wrote: > >> Trying to setup IPv6 for CentOS7 CT. >> Seems original documentation outdated a bit ( >> https://wiki.openvz.org/IPv6). >> Is there updated information? >> >> Thank you! >> >> >> -- >> Oleksiy >> ___ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> > > > -- > Thanks, > Arjit Chaudhary > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users >>> ___ >>> Users mailing list >>> Users@openvz.org >>> https://lists.openvz.org/mailman/listinfo/users >>> >> ___ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
Re: [Users] IPv6, openVZ7, CentOS7
Hi, It could be in br0 if you are bridging enp3s0f0 and/or enp3s0f1 Basically the interface which lists as UP and with the IPv4 information etc should be the right one in my experience. But do back-up original configuration files on the system, before editing just incase something goes wrong you can just copy them back and restart networking. On Thu, 15 Dec, 2022, 17:40 Oleksiy Tkachenko, wrote: > I have many) > # ip a > 1: lo: > 2: enp3s0f0: > 3: enp3s0f1: > 4: enp0s20f0u9u2c2: > 5: br0: > 6: virbr0: > 7: virbr0-nic: > 8: venet0: > 9: host-routed: > 11: veth72240bcc@if3: > 12: veth720bed05@if3: > 13: veth7290a381@if3: > 16: veth721813e6@if3: > 17: veth720a338a@if3: > 24: veth729a3460@if3: > 25: veth720c6518@if3: > 26: veth721bbb55@if3: > 27: veth72705632@if3: > 28: veth72b28dcd@if3: > > > чт, 15 груд. 2022 р. о 13:52 Arjit Chaudhary пише: > >> Is your interface name different by chance? >> >> Can you check, >> >> > ip a >> >> for the actual interface name and then update that interface >> configuration for the IPv6. >> >> On Thu, 15 Dec, 2022, 16:43 Oleksiy Tkachenko, >> wrote: >> >>> Thank you! >>> During node preparation I need to update >>> "/etc/sysconfig/network-scripts/ifcfg-ethX" - but there is no such file. >>> I also need to put "eth0" in "/etc/sysconfig/network" file - is it >>> actual now (when I have no ethX file)? >>> >>> I also need to "Add 'ipt_state' to IPTABLES and 'nf_conntrack_ipv6' to >>> IP6TABLES" in "/etc/vz.conf" - there is no such file also. >>> I have "/etc/vz/vz.conf" on my bare metal openvz7 but there is no >>> "IPTABLES" or "IP6TABLES" mention at all. >>> >>> >>> чт, 15 груд. 2022 р. о 02:03 Arjit Chaudhary пише: >>> (In my experience) Does the host-node have working IPv6 configured on it? If yes, Then you can just do, vzctl set --ipadd -- save and the container too will have working IPv6. If the host-node does not have working IPv6, then you can just configure any address of the IPv6 range on the host-node On Thu, Dec 15, 2022 at 4:15 AM UNLIM.SRV wrote: > Trying to setup IPv6 for CentOS7 CT. > Seems original documentation outdated a bit ( > https://wiki.openvz.org/IPv6). > Is there updated information? > > Thank you! > > > -- > Oleksiy > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > -- Thanks, Arjit Chaudhary ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users >>> ___ >>> Users mailing list >>> Users@openvz.org >>> https://lists.openvz.org/mailman/listinfo/users >>> >> ___ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
Re: [Users] IPv6, openVZ7, CentOS7
I have many) # ip a 1: lo: 2: enp3s0f0: 3: enp3s0f1: 4: enp0s20f0u9u2c2: 5: br0: 6: virbr0: 7: virbr0-nic: 8: venet0: 9: host-routed: 11: veth72240bcc@if3: 12: veth720bed05@if3: 13: veth7290a381@if3: 16: veth721813e6@if3: 17: veth720a338a@if3: 24: veth729a3460@if3: 25: veth720c6518@if3: 26: veth721bbb55@if3: 27: veth72705632@if3: 28: veth72b28dcd@if3: чт, 15 груд. 2022 р. о 13:52 Arjit Chaudhary пише: > Is your interface name different by chance? > > Can you check, > > > ip a > > for the actual interface name and then update that interface configuration > for the IPv6. > > On Thu, 15 Dec, 2022, 16:43 Oleksiy Tkachenko, wrote: > >> Thank you! >> During node preparation I need to update >> "/etc/sysconfig/network-scripts/ifcfg-ethX" - but there is no such file. >> I also need to put "eth0" in "/etc/sysconfig/network" file - is it actual >> now (when I have no ethX file)? >> >> I also need to "Add 'ipt_state' to IPTABLES and 'nf_conntrack_ipv6' to >> IP6TABLES" in "/etc/vz.conf" - there is no such file also. >> I have "/etc/vz/vz.conf" on my bare metal openvz7 but there is no >> "IPTABLES" or "IP6TABLES" mention at all. >> >> >> чт, 15 груд. 2022 р. о 02:03 Arjit Chaudhary пише: >> >>> (In my experience) >>> >>> Does the host-node have working IPv6 configured on it? If yes, >>> >>> Then you can just do, >>> >>> vzctl set --ipadd -- save >>> >>> and the container too will have working IPv6. >>> >>> If the host-node does not have working IPv6, then you can just configure >>> any address of the IPv6 range on the host-node >>> >>> >>> On Thu, Dec 15, 2022 at 4:15 AM UNLIM.SRV wrote: >>> Trying to setup IPv6 for CentOS7 CT. Seems original documentation outdated a bit ( https://wiki.openvz.org/IPv6). Is there updated information? Thank you! -- Oleksiy ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users >>> >>> >>> -- >>> Thanks, >>> Arjit Chaudhary >>> ___ >>> Users mailing list >>> Users@openvz.org >>> https://lists.openvz.org/mailman/listinfo/users >>> >> ___ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
Re: [Users] IPv6, openVZ7, CentOS7
Is your interface name different by chance? Can you check, > ip a for the actual interface name and then update that interface configuration for the IPv6. On Thu, 15 Dec, 2022, 16:43 Oleksiy Tkachenko, wrote: > Thank you! > During node preparation I need to update > "/etc/sysconfig/network-scripts/ifcfg-ethX" - but there is no such file. > I also need to put "eth0" in "/etc/sysconfig/network" file - is it actual > now (when I have no ethX file)? > > I also need to "Add 'ipt_state' to IPTABLES and 'nf_conntrack_ipv6' to > IP6TABLES" in "/etc/vz.conf" - there is no such file also. > I have "/etc/vz/vz.conf" on my bare metal openvz7 but there is no > "IPTABLES" or "IP6TABLES" mention at all. > > > чт, 15 груд. 2022 р. о 02:03 Arjit Chaudhary пише: > >> (In my experience) >> >> Does the host-node have working IPv6 configured on it? If yes, >> >> Then you can just do, >> >> vzctl set --ipadd -- save >> >> and the container too will have working IPv6. >> >> If the host-node does not have working IPv6, then you can just configure >> any address of the IPv6 range on the host-node >> >> >> On Thu, Dec 15, 2022 at 4:15 AM UNLIM.SRV wrote: >> >>> Trying to setup IPv6 for CentOS7 CT. >>> Seems original documentation outdated a bit ( >>> https://wiki.openvz.org/IPv6). >>> Is there updated information? >>> >>> Thank you! >>> >>> >>> -- >>> Oleksiy >>> ___ >>> Users mailing list >>> Users@openvz.org >>> https://lists.openvz.org/mailman/listinfo/users >>> >> >> >> -- >> Thanks, >> Arjit Chaudhary >> ___ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
Re: [Users] IPv6, openVZ7, CentOS7
Thank you! During node preparation I need to update "/etc/sysconfig/network-scripts/ifcfg-ethX" - but there is no such file. I also need to put "eth0" in "/etc/sysconfig/network" file - is it actual now (when I have no ethX file)? I also need to "Add 'ipt_state' to IPTABLES and 'nf_conntrack_ipv6' to IP6TABLES" in "/etc/vz.conf" - there is no such file also. I have "/etc/vz/vz.conf" on my bare metal openvz7 but there is no "IPTABLES" or "IP6TABLES" mention at all. чт, 15 груд. 2022 р. о 02:03 Arjit Chaudhary пише: > (In my experience) > > Does the host-node have working IPv6 configured on it? If yes, > > Then you can just do, > > vzctl set --ipadd -- save > > and the container too will have working IPv6. > > If the host-node does not have working IPv6, then you can just configure > any address of the IPv6 range on the host-node > > > On Thu, Dec 15, 2022 at 4:15 AM UNLIM.SRV wrote: > >> Trying to setup IPv6 for CentOS7 CT. >> Seems original documentation outdated a bit (https://wiki.openvz.org/IPv6 >> ). >> Is there updated information? >> >> Thank you! >> >> >> -- >> Oleksiy >> ___ >> Users mailing list >> Users@openvz.org >> https://lists.openvz.org/mailman/listinfo/users >> > > > -- > Thanks, > Arjit Chaudhary > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users
Re: [Users] IPv6, openVZ7, CentOS7
(In my experience) Does the host-node have working IPv6 configured on it? If yes, Then you can just do, vzctl set --ipadd -- save and the container too will have working IPv6. If the host-node does not have working IPv6, then you can just configure any address of the IPv6 range on the host-node On Thu, Dec 15, 2022 at 4:15 AM UNLIM.SRV wrote: > Trying to setup IPv6 for CentOS7 CT. > Seems original documentation outdated a bit (https://wiki.openvz.org/IPv6 > ). > Is there updated information? > > Thank you! > > > -- > Oleksiy > ___ > Users mailing list > Users@openvz.org > https://lists.openvz.org/mailman/listinfo/users > -- Thanks, Arjit Chaudhary ___ Users mailing list Users@openvz.org https://lists.openvz.org/mailman/listinfo/users