[Users] Multiple Logical Networks on same physical nic

[Ricardo Esteves]

Hi,

 

How can i set for example 2 Logical Network to use the same physical nic?

 

Example:

Logical Networks: LAN1 (vlan 1), LAN2 (vlan 2),  iSCSI1 (vlan 11), iSCSI2
(vlan 12)

Physical nics on host: eth0, eth1

 

Attach LAN1 and LAN2 to eth0

Attach iSCSI1 and iSCSI2 to eth1

 

How can I accomplish this?

 

Best regards,

Ricardo Esteves. 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Storage - Local and iSCSI

[Ricardo Esteves]

Hi,

 

Is it possible with oVirt to use Local Storage and iSCSI at the same time
for the same host?

 

Best regards,

Ricardo Esteves.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Logical Netowrk - ovirtmgmt

[Robert Middleswarth]

I just looked at this time it doesn't look like you can detach the 
logical network to redefine it as a logic network.  With that said.  I 
am willing to bet that if you were to manually define the network before 
setting up the engine it would likely work.  It also looks like if you 
went and shutdown everything edit the networks manually and defined it 
to a vlan that would work as well.  The key is to have the ovirt 
shutdown well making the change.


Thanks
Robert


On 06/14/2012 06:24 PM, Ricardo Esteves wrote:

Hi,

Is it possible to set a VLAN for the ovirtmgmt logical network?

Best regards,
Ricardo Esteves.

-Original Message-
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
Itamar Heim
Sent: quinta-feira, 14 de Junho de 2012 15:30
To: Dennis Jacobfeuerborn
Cc: users@ovirt.org
Subject: Re: [Users] Storage - Local and iSCSI

On 06/14/2012 02:10 PM, Dennis Jacobfeuerborn wrote:

On 06/14/2012 12:41 PM, Omer Frenkel wrote:

  Is it possible with oVirt to use Local Storage and iSCSI at the same
  time for the same host?


  Best regards,
  Ricardo Esteves.
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users

No, you choose storage type when defining the data center, and host
can be only in 1 DC at a given time

What if I have a bunch of NFS storage systems and what to move to iScsi?
Does that mean I have to move everything over in one fell swoop?
Having to choose either NFS or iSCSI for the entire datacenter seems
awfully restrictive.

in addition to dafna's suggestions for this.
allowing to use multiple storage types from same clusters/DC is on the
roadmap ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Logical Netowrk - ovirtmgmt

[Ricardo Esteves]

Hi,

Is it possible to set a VLAN for the ovirtmgmt logical network?

Best regards,
Ricardo Esteves.

-Original Message-
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
Itamar Heim
Sent: quinta-feira, 14 de Junho de 2012 15:30
To: Dennis Jacobfeuerborn
Cc: users@ovirt.org
Subject: Re: [Users] Storage - Local and iSCSI

On 06/14/2012 02:10 PM, Dennis Jacobfeuerborn wrote:
> On 06/14/2012 12:41 PM, Omer Frenkel wrote:
>>
>>  Is it possible with oVirt to use Local Storage and iSCSI at the same
>>  time for the same host?
>>
>>
>>  Best regards,
>>  Ricardo Esteves.
>>  ___
>>  Users mailing list
>>  Users@ovirt.org
>>  http://lists.ovirt.org/mailman/listinfo/users
>>
>> No, you choose storage type when defining the data center, and host 
>> can be only in 1 DC at a given time
>
> What if I have a bunch of NFS storage systems and what to move to iScsi?
> Does that mean I have to move everything over in one fell swoop?
> Having to choose either NFS or iSCSI for the entire datacenter seems 
> awfully restrictive.

in addition to dafna's suggestions for this.
allowing to use multiple storage types from same clusters/DC is on the
roadmap ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Following Up on LinuxCon Japan Workshop

[Leslie Hawthorn]

On 06/14/2012 04:18 AM, Mike Burns wrote:

On Wed, 2012-06-13 at 23:59 -0700, Leslie Hawthorn wrote:

Hi Mike,

Thanks for your detailed feedback.

On 06/13/2012 04:41 PM, Mike Burns wrote:

- Audience Participation
How many attendees? How did the Q&A periods go? Would we like to prepare
a post-event attendee survey? (I recommend we do the survey and can
prepare some questions for the group if that's useful.)
I think we should prepare the survey in advance of the next workshop and
ask people to fill it out during the workshop, rather than coming back a
couple weeks after the fact.

I have an attendee list from the Linux Foundation for each workshop, so
if we'd like to get the survey out this week it can happen. I believe I
can also find a resource to translate the survey into Japanese, though
that would mean a delay in sending it out.

Some suggested questions, I'd pare down to no more than 5.
- What was your favorite talk?
- What could we do to improve?
- Were the talks too long? Too short?
- Was the presentation material clear to you?
- Are you currently using or interested in using oVirt?
- Are you interested in contributing to the oVirt community?

Cheers,
LH



If you think it's worth it, then go for it.  Feedback is always good.


I definitely think it's worth it and the Linux Foundation has graciously 
agreed to include our questions in their post-event attendee survey. 
Here are the questions we've asked, along with a request to the LF to 
help us word the text in such a way that it is clear to attendees who do 
not speak English as their first language:


oVirt:
Did you attend the oVirt workshop?
If yes:
1) What talk(s) were most useful to you?
2) What can we do to improve the workshop?
3) Was the presentation material clear to you?
4) Are you or your organization currently using or interested in using 
oVirt?

5) Would you like to contribute to the oVirt community?

I will collate the feedback from the survey and share it with everyone 
once it is collected.


Cheers,
LH

--
Leslie Hawthorn
Community Action and Impact
Open Source and Standards @ Red Hat

identi.ca/lh
twitter.com/lhawthorn

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] ovirt 3.1 - cannot boot virtual server from CD

[Juan Hernandez]

On 06/14/2012 04:59 PM, Winfried de Heiden wrote:

Hi all,

Trying to start a virtual server from DVD fails, the (spice) console gives:

"Could not read from CDROM (code 0003)"


Some other people is reporting this same problem in #ovirt. Can you 
check what is the value of the virt_use_nfs boolean in your hypervisor:


getsebool virt_use_nfs

If it is "off" it is wrong, you will have to change it to "on":

setsebool -P virt_use_nfs on


2012-06-14 18:53:08,630 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START, IsoPrefixVDSCommand(storagePoolId =
b2456911-a25e-4c33-8e46-bae35cc015e7, ignoreFailoverLimit = false,
compatabilityVersion = null), log id: 59f0cc1c
2012-06-14 18:53:08,632 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] FINISH, IsoPrefixVDSCommand, return:
/rhev/data-center/b2456911-a25e-4c33-8e46-bae35cc015e7/bfb1da46-c417-472a-8905-09e687648b16/images/----,
log id: 59f0cc1c
2012-06-14 18:53:08,752 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START, IsValidVDSCommand(storagePoolId =
b2456911-a25e-4c33-8e46-bae35cc015e7, ignoreFailoverLimit = false,
compatabilityVersion = null), log id: 2ba80f77
2012-06-14 18:53:08,757 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] FINISH, IsValidVDSCommand, return: true, log
id: 2ba80f77
2012-06-14 18:53:08,864 INFO
[org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START, IsVmDuringInitiatingVDSCommand(vmId =
d3a1600e-9fb9-4d44-9c5e-b6278226ae57), log id: 7bafb10a
2012-06-14 18:53:08,867 INFO
[org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] FINISH, IsVmDuringInitiatingVDSCommand, return:
false, log id: 7bafb10a
2012-06-14 18:53:08,896 INFO [org.ovirt.engine.core.bll.RunVmOnceCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] Running command: RunVmOnceCommand internal:
false. Entities affected : ID: d3a1600e-9fb9-4d44-9c5e-b6278226ae57 Type: VM
2012-06-14 18:53:08,922 INFO
[org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand] (ajp--0.0.0.0-8009-3)
[193bc72b] START, CreateVmVDSCommand(vdsId =
c781df7a-b5f5-11e1-91f8-e791895bd007, vmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,
vm=org.ovirt.engine.core.common.businessentities.VM@4209547b), log id: 184fd2c
2012-06-14 18:53:08,931 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START, CreateVDSCommand(vdsId =
c781df7a-b5f5-11e1-91f8-e791895bd007, vmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,
vm=org.ovirt.engine.core.common.businessentities.VM@4209547b), log id: ba59fb6
2012-06-14 18:53:08,997 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b]
org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand
spiceSslCipherSuite=DEFAULT,memSize=1024,kvmEnable=true,smp=1,emulatedMachine=pc-0.14,vmType=kvm,keyboardLayout=en-us,pitReinjection=false,nice=0,display=qxl,smpCoresPerSocket=1,spiceSecureChannels=smain,sinputs,scursor,splayback,srecord,sdisplay,timeOffset=0,transparentHugePages=true,vmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,devices=[Ljava.util.Map;@7525661e,acpiEnable=true,vmName=CENTOS6,cpuType=Conroe,custom={device_c27ccfac-aa9c-4b66-977a-4a12e6088533device_26088fe5-ef48-492e-bdad-a7b6e434f715device_d567a5eb-c03a-41a7-8978-3fc4c19743c8device_42361439-dce5-4349-9542-8f2200fc12cc=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=42361439-dce5-4349-9542-8f2200fc12cc,Device=spicevmc,Type=channel,BootOrder=0,SpecParams={},Address={port=2,
bus=0, controller=0,
type=virtio-serial},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=channel1,
device_c27ccfac-aa9c-4b66-977a-4a12e6088533device_26088fe5-ef48-492e-bdad-a7b6e434f715device_d567a5eb-c03a-41a7-8978-3fc4c19743c8=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=d567a5eb-c03a-41a7-8978-3fc4c19743c8,Device=unix,Type=channel,BootOrder=0,SpecParams={},Address={port=1,
bus=0, controller=0,
type=virtio-serial},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=channel0,
device_c27ccfac-aa9c-4b66-977a-4a12e6088533device_26088fe5-ef48-492e-bdad-a7b6e434f715=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=26088fe5-ef48-492e-bdad-a7b6e434f715,Device=virtio-serial,Type=controller,BootOrder=0,SpecParams={},Address={bus=0x00,
domain=0x, type=pci, slot=0x04,
function=0x0},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=virtio-serial0,
device_c27ccfac-aa9c-4b66-977a-4a12e6088533=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=c27ccfac-aa9c-4b66-977a-4a12e6088533,Device=usb,Type=controller,BootOrder=0,SpecParams={},Address={bus=0x00,
domain=0x, type=pci, slot=0x01,
function=0x2},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=usb0}
2012-06-14 18:53:09,019 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand]
(ajp--0.

Re: [Users] Failed to build (ovirt version 3.1.0_0001)

[Juan Hernandez]

The problem that you are having with the encoding should not happen, but 
you may try the following maven option to workaround it:


mvn -Dproject.build.sourceEncoding=ISO-8859-1 ...

On 06/14/2012 05:05 PM, зоррыч wrote:

I downloaded the src RPM package with the URL 
http://ovirt.org/releases/beta/src/ovirt-engine-3.1.0_0001-0.gitdd65f3.fc17.src.rpm
unpack it:
rpm -ihv ovirt-engine-3.1.0_0001-0.gitdd65f3.fc17.src.rpm
And tried to collect:
cd rpmbuild/SPECS/
rpmbuild -bb ovirt-engine.spec

In the process of binding maven has issued an error.

[root@noc-2 SPECS]# mvn --version
Warning: JAVA_HOME environment variable is not set.
Apache Maven 2.2.1 (r801777; 2009-08-06 15:16:01-0400)
Java version: 1.6.0_24
Java home: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre
Default locale: en_US, platform encoding: UTF-8
OS name: "linux" version: "2.6.32-220.7.1.el6.x86_64" arch: "amd64" Family: 
"unix"



[root@noc-2 SPECS]# locale -a | grep en
en_AG
en_AG.utf8
en_AU
en_AU.iso88591
en_AU.utf8
en_BW
en_BW.iso88591
en_BW.utf8
en_CA
en_CA.iso88591
en_CA.utf8
en_DK
en_DK.iso88591
en_DK.utf8
en_GB
en_GB.iso88591
en_GB.iso885915
en_GB.utf8
en_HK
en_HK.iso88591
en_HK.utf8
en_IE
en_IE@euro
en_IE.iso88591
en_IE.iso885915@euro
en_IE.utf8
en_IN
en_IN.utf8
en_NG
en_NG.utf8
en_NZ
en_NZ.iso88591
en_NZ.utf8
en_PH
en_PH.iso88591
en_PH.utf8
en_SG
en_SG.iso88591
en_SG.utf8
en_US
en_US.iso88591
en_US.iso885915
en_US.utf8
en_ZA
en_ZA.iso88591
en_ZA.utf8
en_ZW
en_ZW.iso88591
en_ZW.utf8

-Original Message-
From: Itamar Heim [mailto:ih...@redhat.com]
Sent: Thursday, June 14, 2012 6:51 PM
To: зоррыч
Cc: users@ovirt.org
Subject: Re: [Users] Failed to build (ovirt version 3.1.0_0001)

command line you used?
maven version?
git repo?
any special locale on your system?

On 06/14/2012 02:04 PM, зоррыч wrote:

An error in the encoding:

[INFO] [resources:testResources {execution: default-testResources}]

[INFO] Using 'UTF-8' encoding to copy filtered resources.

[INFO] skip non existing resourceDirectory
/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/resources

[INFO] [compiler:testCompile {execution: default-testCompile}]

[INFO] Compiling 22 source files to
/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/target/test-classes

[INFO]
--
--

[ERROR] BUILD FAILURE

[INFO]
--
--

[INFO] Compilation failure

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,83] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,84] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,86] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,87] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,89] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,90] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,91] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,92] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,93] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,94] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,96] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
Test.java:[26,97] unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules

Re: [Users] Failed to build (ovirt version 3.1.0_0001)

[зоррыч]

I downloaded the src RPM package with the URL 
http://ovirt.org/releases/beta/src/ovirt-engine-3.1.0_0001-0.gitdd65f3.fc17.src.rpm
unpack it:
rpm -ihv ovirt-engine-3.1.0_0001-0.gitdd65f3.fc17.src.rpm
And tried to collect:
cd rpmbuild/SPECS/
rpmbuild -bb ovirt-engine.spec

In the process of binding maven has issued an error.

[root@noc-2 SPECS]# mvn --version
Warning: JAVA_HOME environment variable is not set.
Apache Maven 2.2.1 (r801777; 2009-08-06 15:16:01-0400)
Java version: 1.6.0_24
Java home: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre
Default locale: en_US, platform encoding: UTF-8
OS name: "linux" version: "2.6.32-220.7.1.el6.x86_64" arch: "amd64" Family: 
"unix"



[root@noc-2 SPECS]# locale -a | grep en
en_AG
en_AG.utf8
en_AU
en_AU.iso88591
en_AU.utf8
en_BW
en_BW.iso88591
en_BW.utf8
en_CA
en_CA.iso88591
en_CA.utf8
en_DK
en_DK.iso88591
en_DK.utf8
en_GB
en_GB.iso88591
en_GB.iso885915
en_GB.utf8
en_HK
en_HK.iso88591
en_HK.utf8
en_IE
en_IE@euro
en_IE.iso88591
en_IE.iso885915@euro
en_IE.utf8
en_IN
en_IN.utf8
en_NG
en_NG.utf8
en_NZ
en_NZ.iso88591
en_NZ.utf8
en_PH
en_PH.iso88591
en_PH.utf8
en_SG
en_SG.iso88591
en_SG.utf8
en_US
en_US.iso88591
en_US.iso885915
en_US.utf8
en_ZA
en_ZA.iso88591
en_ZA.utf8
en_ZW
en_ZW.iso88591
en_ZW.utf8

-Original Message-
From: Itamar Heim [mailto:ih...@redhat.com] 
Sent: Thursday, June 14, 2012 6:51 PM
To: зоррыч
Cc: users@ovirt.org
Subject: Re: [Users] Failed to build (ovirt version 3.1.0_0001)

command line you used?
maven version?
git repo?
any special locale on your system?

On 06/14/2012 02:04 PM, зоррыч wrote:
> An error in the encoding:
>
> [INFO] [resources:testResources {execution: default-testResources}]
>
> [INFO] Using 'UTF-8' encoding to copy filtered resources.
>
> [INFO] skip non existing resourceDirectory 
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/resources
>
> [INFO] [compiler:testCompile {execution: default-testCompile}]
>
> [INFO] Compiling 22 source files to
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/target/test-classes
>
> [INFO]
> --
> --
>
> [ERROR] BUILD FAILURE
>
> [INFO]
> --
> --
>
> [INFO] Compilation failure
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,83] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,84] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,86] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,87] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,89] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,90] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,91] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,92] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,93] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,94] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,96] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[26,97] unmappable character for encoding ASCII
>
> /root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/c
> ommon/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtils
> Test.java:[2

Re: [Users] Following Up on LinuxCon Japan Workshop

[Barak Azulay]

On 06/14/2012 02:41 AM, Mike Burns wrote:

Hi Leslie,

On Wed, 2012-06-13 at 15:14 -0700, Leslie Hawthorn wrote:

Hello everyone,

I'd like to collect feedback from everyone on last week's oVirt workshop
at LinuxCon Japan. [0] Please reply back with comments by close of
business this Friday, 15 June.

Once we have gathered feedback on list, I'll capture it on the oVirt
wiki. We can then use what we've learned to help construct the agenda
and other plans for other upcoming oVirt workshops at LinuxCons. [1]

If you know that you would like to volunteer as an instructor for future
workshops or would like to suggest alternate content for the workshop,
please include that in your feedback.

- Course Material
What sessions were most well received? Which ones require improvement?
Any additional sessions we'd suggest?


All of the sessions seemed to be well received.  I don't know that any
need blatant improvement, though they could probably all take a bit of
slide updates.  The ovirt-node presentation was especially out of date
(my fault) with it's screenshots.




I would like to add:
- a demo is a must in a workshop, as it is the most effective and
  impressive way to attract people.
- I think the ovirt-engine presentation needs a bit more meat
- I would also add vertical presentations:
* ovirt network
* ovirt storage
* ovirt vm life cycle
  Of course all the above should be presented after the arch & demo
  presentation







- Audience Participation
How many attendees? How did the Q&A periods go? Would we like to prepare
a post-event attendee survey? (I recommend we do the survey and can
prepare some questions for the group if that's useful.)


There were probably between 25-35 people through the course of the day
for all the presentations.



I gave also an intro/arch talk also in the virt mini-summit, I actually 
gave 2.

I volunteered to cover for one of the presenters that surprisingly
didn't show up on time, because of the confusion this session was rather 
small (~40)

In the second one (in my scheduled slot), there were about ~80.





There wasn't really a lot of time set aside for Q&A aside from a few
minutes at the end of each presentation and the breaks in between
presentations.  During those times, there generally were people asking
questions.



Actually I wasn't expecting too many questions due to the different 
culture of the audience, but we did get questions and people showed 
interest.
Most of the interesting questions came during the breaks, and I had a 
few white-board sessions with those people.






I think we should prepare the survey in advance of the next workshop and
ask people to fill it out during the workshop, rather than coming back a
couple weeks after the fact.  We didn't really collect names of the
people in attendance and I expect that a fair number of people
registered attended the Gluster Conference.



The linux foundation scanned all the participants tags, so I guess they 
can supply the names.





- Developer/user traction resulting from engaging at workshop
Did this workshop help us to gain new developers or users? Reinforce
relationships with existing community members?


Only time will really tell here.  People definitely seemed interested
and there were a couple people already downloading and installing the
bits during the workshop.  I got the impression that most of the people
there were more corporate focused -- Hitachi and Fujitsu were both well
represented.  They're from companies that have previously expressed
interest in the project.




Hard to tell,
I had a feeling that there was also a none developers group that came 
also to learn about ovirt, more of the consultant type that actually 
considering ovirt as an option.





- Promotion of the event, both before and after
What could be done to more effectively promote the event prior to the
workshops? Videos and slides from the workshop should be posted on the
LC Japan site tomorrow; what action would the community like to take to
promote this content?


Not really my area of expertise -- promoting.  Probably better to get
information out there earlier that the workshop is happening.  It seemed
to be a bit of a fire drill getting things together for this workshop
since it was only about a month before that we decided to run it.
Future workshops shouldn't be as big a deal.




I would say we need a lot of promotion, I was actually accessed by a few 
people after the into presentation, saying they had no idea that ovirt 
is so mature and feature reach.

This message should be conveyed before the workshop.




Probably an email announcement to users@ with a link to the
presentations/videos is the right next step.


- A/V and Room Set up
Did the seating arrangements work well for the workshop format? Did the
A/V work well, including the videotaping process?


Our room was setup with 5 round tables seating 10 people each.  I'm not
sure that it was really the right layout.  I expected either rows of

[Users] ovirt 3.1 - cannot boot virtual server from CD

[Winfried de Heiden]

  
  
Hi all,

Trying to start a virtual server from DVD fails, the (spice) console
gives:

"Could not read from CDROM (code 0003)"

2012-06-14 18:53:08,630 INFO 
[org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START,
IsoPrefixVDSCommand(storagePoolId =
b2456911-a25e-4c33-8e46-bae35cc015e7, ignoreFailoverLimit = false,
compatabilityVersion = null), log id: 59f0cc1c
2012-06-14 18:53:08,632 INFO 
[org.ovirt.engine.core.vdsbroker.irsbroker.IsoPrefixVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] FINISH, IsoPrefixVDSCommand,
return:
/rhev/data-center/b2456911-a25e-4c33-8e46-bae35cc015e7/bfb1da46-c417-472a-8905-09e687648b16/images/----,
log id: 59f0cc1c
2012-06-14 18:53:08,752 INFO 
[org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START,
IsValidVDSCommand(storagePoolId =
b2456911-a25e-4c33-8e46-bae35cc015e7, ignoreFailoverLimit = false,
compatabilityVersion = null), log id: 2ba80f77
2012-06-14 18:53:08,757 INFO 
[org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] FINISH, IsValidVDSCommand, return:
true, log id: 2ba80f77
2012-06-14 18:53:08,864 INFO 
[org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START,
IsVmDuringInitiatingVDSCommand(vmId =
d3a1600e-9fb9-4d44-9c5e-b6278226ae57), log id: 7bafb10a
2012-06-14 18:53:08,867 INFO 
[org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] FINISH,
IsVmDuringInitiatingVDSCommand, return: false, log id: 7bafb10a
2012-06-14 18:53:08,896 INFO 
[org.ovirt.engine.core.bll.RunVmOnceCommand] (ajp--0.0.0.0-8009-3)
[193bc72b] Running command: RunVmOnceCommand internal: false.
Entities affected :  ID: d3a1600e-9fb9-4d44-9c5e-b6278226ae57 Type:
VM
2012-06-14 18:53:08,922 INFO 
[org.ovirt.engine.core.vdsbroker.CreateVmVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START, CreateVmVDSCommand(vdsId =
c781df7a-b5f5-11e1-91f8-e791895bd007,
vmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,
vm=org.ovirt.engine.core.common.businessentities.VM@4209547b), log
id: 184fd2c
2012-06-14 18:53:08,931 INFO 
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b] START, CreateVDSCommand(vdsId =
c781df7a-b5f5-11e1-91f8-e791895bd007,
vmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,
vm=org.ovirt.engine.core.common.businessentities.VM@4209547b), log
id: ba59fb6
2012-06-14 18:53:08,997 INFO 
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand]
(ajp--0.0.0.0-8009-3) [193bc72b]
org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand
spiceSslCipherSuite=DEFAULT,memSize=1024,kvmEnable=true,smp=1,emulatedMachine=pc-0.14,vmType=kvm,keyboardLayout=en-us,pitReinjection=false,nice=0,display=qxl,smpCoresPerSocket=1,spiceSecureChannels=smain,sinputs,scursor,splayback,srecord,sdisplay,timeOffset=0,transparentHugePages=true,vmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,devices=[Ljava.util.Map;@7525661e,acpiEnable=true,vmName=CENTOS6,cpuType=Conroe,custom={device_c27ccfac-aa9c-4b66-977a-4a12e6088533device_26088fe5-ef48-492e-bdad-a7b6e434f715device_d567a5eb-c03a-41a7-8978-3fc4c19743c8device_42361439-dce5-4349-9542-8f2200fc12cc=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=42361439-dce5-4349-9542-8f2200fc12cc,Device=spicevmc,Type=channel,BootOrder=0,SpecParams={},Address={port=2,
bus=0, controller=0,
type=virtio-serial},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=channel1,
device_c27ccfac-aa9c-4b66-977a-4a12e6088533device_26088fe5-ef48-492e-bdad-a7b6e434f715device_d567a5eb-c03a-41a7-8978-3fc4c19743c8=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=d567a5eb-c03a-41a7-8978-3fc4c19743c8,Device=unix,Type=channel,BootOrder=0,SpecParams={},Address={port=1,
bus=0, controller=0,
type=virtio-serial},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=channel0,
device_c27ccfac-aa9c-4b66-977a-4a12e6088533device_26088fe5-ef48-492e-bdad-a7b6e434f715=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=26088fe5-ef48-492e-bdad-a7b6e434f715,Device=virtio-serial,Type=controller,BootOrder=0,SpecParams={},Address={bus=0x00,
domain=0x, type=pci, slot=0x04,
function=0x0},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=virtio-serial0,
device_c27ccfac-aa9c-4b66-977a-4a12e6088533=VmId=d3a1600e-9fb9-4d44-9c5e-b6278226ae57,DeviceId=c27ccfac-aa9c-4b66-977a-4a12e6088533,Device=usb,Type=controller,BootOrder=0,SpecParams={},Address={bus=0x00,
domain=0x, type=pci, slot=0x01,
function=0x2},IsManaged=false,IsPlugged=true,IsReadOnly=false,alias=usb0}
2012-06-14 18:53:09,019 INFO 
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVDSCommand]
(ajp-

[Users] Fwd: Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Hideo GOTO]

Dear  friends,

To be rude is not in my intension at all. In case my exprssion have
caused you such an impression, please kindly understand that English
is not my mother language, and accept my appology.

Thanks a lot for you suggestion. I try to check, if the product
provdes us with the BIOS switch for NX bit.

Best Regards.

H.G.

2012/6/14 Andrew Cathrow :
>
>
> - Original Message -
>> From: "Hideo GOTO" 
>> To: users@ovirt.org
>> Sent: Thursday, June 14, 2012 10:27:06 AM
>> Subject: Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as      
>>  Opteron
>>
>> Dear Yaniv Kaul,
>>
>> Thanks for your propmt anwer.
>> It seems that your patience did not allow your reading to continue
>> after "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".
>
> That sounds a little rude to me, maybe that's not the way you intended it.
>
> Looking at the flags it looks like you are missing NX[1] this might be 
> disabled in the bios, or perhaps not supported in the bios ?
>
> [1] http://en.wikipedia.org/wiki/NX_bit
>>
>
>
>> As reported in the last part of my previous mail, the output from
>> vdsClient shows us that the processor is recognised as none of AMD
>> Opteron G1, G2 or G3 (cpuFlags=...) . Thus, Quad-core AMD 2384 cannot
>> match any of  Ovirt CPU type options. For confriming, I have just
>> tried, upon reciept of your reply, to add the host to cluster of
>> other
>> CPU types (G1, G2 ..) , to get the same unfortunate result.
>>
>> For your comparaison, here-below shows the "cpuFlags"  reported for
>> an
>> AMD Opteron 4284, which Ovirt can treat as either of AMD Opteron
>> G3,G2
>> and G1 :
>>
>> [root@ovnode02 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
>> cpuFlags
>>         cpuFlags =
>> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,popcnt,aes,xsave,avx,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,xop,skinit,wdt,lwp,fma4,nodeid_msr,topoext,perfctr_core,arat,cpb,npt,lbrv,svm_lock,nrip_save,tsc_scale,vmcb_clean,flushbyasid,decodeassists,pausefilter,pfthreshold,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_qemu64,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1,model_Opteron_G2,model_Opteron_G3
>>
>>
>> 2012/6/14 Hideo GOTO :
>> > Dear sirs,
>> >
>> > We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384"
>> > to
>> > a working ovirt-node cluster ( CPU type of the cluster = "AMD
>> > Opteron
>> > G3". Existing node servers use AMD Opteron 4284) . Then, the
>> > Ovirt-engine refuses to intergrate DL365-G5, reporting an error of
>> > the
>> > type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".
>> >
>> > Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they
>> > are
>> > KVM compatible? (This HP DL365 worked fine with VMWare).
>> >
>> > Any solution, advise, comment is wellcome, since we do not much
>> > want
>> > to revirt to VMWare.
>> >
>> > FIY, On the ovirt-engine's node information, "CPU Name" is reported
>> > as
>> > [N/A] and "CPU Type" as "Quad-Core AMD"
>> >
>> > Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
>> > -
>> > processor       : 7
>> > vendor_id       : AuthenticAMD
>> > cpu family      : 16
>> > model           : 4
>> > model name      : Quad-Core AMD Opteron(tm) Processor 2384
>> > stepping        : 2
>> > microcode       : 0x186
>> > cpu MHz         : 2700.096
>> > cache size      : 512 KB
>> > physical id     : 1
>> > siblings        : 4
>> > core id         : 3
>> > cpu cores       : 4
>> > apicid          : 7
>> > initial apicid  : 7
>> > fpu             : yes
>> > fpu_exception   : yes
>> > cpuid level     : 5
>> > wp              : yes
>> > flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
>> > pge
>> > mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
>> > fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good
>> > nopl
>> > nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy
>> > svm
>> > extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
>> > skinit
>> > wdt npt lbrv svm_lock nrip_save
>> > bogomips        : 5400.44
>> > TLB size        : 1024 4K pages
>> > clflush size    : 64
>> > cache_alignment : 64
>> > address sizes   : 48 bits physical, 48 bits virtual
>> > power management: ts ttp tm stc 100mhzsteps hwpstate
>> > ---
>> >
>> > According to vdsClient's info as shown below, Quad-core Opteron  is
>> > recognized as if it were a good old 32 bit CPU.
>> >
>> > [root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
>> > cpuFlags
>> >     

Re: [Users] Failed to build (ovirt version 3.1.0_0001)

[Itamar Heim]

command line you used?
maven version?
git repo?
any special locale on your system?

On 06/14/2012 02:04 PM, зоррыч wrote:

An error in the encoding:

[INFO] [resources:testResources {execution: default-testResources}]

[INFO] Using 'UTF-8' encoding to copy filtered resources.

[INFO] skip non existing resourceDirectory
/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/resources

[INFO] [compiler:testCompile {execution: default-testCompile}]

[INFO] Compiling 22 source files to
/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/target/test-classes

[INFO]


[ERROR] BUILD FAILURE

[INFO]


[INFO] Compilation failure

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,83]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,84]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,86]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,87]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,89]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,90]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,91]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,92]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,93]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,94]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,96]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,97]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,98]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,99]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,101]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,102]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,103]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,104]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,110]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,111]
unmappable character for encoding ASCII

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[26,112]
unmappable character for e

Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Itamar Heim]

On 06/14/2012 05:32 PM, Andrew Cathrow wrote:



- Original Message -

From: "Hideo GOTO"
To: users@ovirt.org
Sent: Thursday, June 14, 2012 10:27:06 AM
Subject: Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as   
Opteron

Dear Yaniv Kaul,

Thanks for your propmt anwer.
It seems that your patience did not allow your reading to continue
after "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".


That sounds a little rude to me, maybe that's not the way you intended it.

Looking at the flags it looks like you are missing NX[1] this might be disabled 
in the bios, or perhaps not supported in the bios ?

[1] http://en.wikipedia.org/wiki/NX_bit


and you are supposed to have a detailed event in events subtab of the 
host with an explanation on why it wasn't added to the cluster 
(specifically on a missing nx flag)








As reported in the last part of my previous mail, the output from
vdsClient shows us that the processor is recognised as none of AMD
Opteron G1, G2 or G3 (cpuFlags=...) . Thus, Quad-core AMD 2384 cannot
match any of  Ovirt CPU type options. For confriming, I have just
tried, upon reciept of your reply, to add the host to cluster of
other
CPU types (G1, G2 ..) , to get the same unfortunate result.

For your comparaison, here-below shows the "cpuFlags"  reported for
an
AMD Opteron 4284, which Ovirt can treat as either of AMD Opteron
G3,G2
and G1 :

[root@ovnode02 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
cpuFlags
 cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,popcnt,aes,xsave,avx,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,xop,skinit,wdt,lwp,fma4,nodeid_msr,topoext,perfctr_core,arat,cpb,npt,lbrv,svm_lock,nrip_save,tsc_scale,vmcb_clean,flushbyasid,decodeassists,pausefilter,pfthreshold,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_qemu64,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1,model_Opteron_G2,model_Opteron_G3


2012/6/14 Hideo GOTO:

Dear sirs,

We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384"
to
a working ovirt-node cluster ( CPU type of the cluster = "AMD
Opteron
G3". Existing node servers use AMD Opteron 4284) . Then, the
Ovirt-engine refuses to intergrate DL365-G5, reporting an error of
the
type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".

Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they
are
KVM compatible? (This HP DL365 worked fine with VMWare).

Any solution, advise, comment is wellcome, since we do not much
want
to revirt to VMWare.

FIY, On the ovirt-engine's node information, "CPU Name" is reported
as
[N/A] and "CPU Type" as "Quad-Core AMD"

Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
-
processor   : 7
vendor_id   : AuthenticAMD
cpu family  : 16
model   : 4
model name  : Quad-Core AMD Opteron(tm) Processor 2384
stepping: 2
microcode   : 0x186
cpu MHz : 2700.096
cache size  : 512 KB
physical id : 1
siblings: 4
core id : 3
cpu cores   : 4
apicid  : 7
initial apicid  : 7
fpu : yes
fpu_exception   : yes
cpuid level : 5
wp  : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good
nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy
svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
skinit
wdt npt lbrv svm_lock nrip_save
bogomips: 5400.44
TLB size: 1024 4K pages
clflush size: 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
---

According to vdsClient's info as shown below, Quad-core Opteron  is
recognized as if it were a good old 32 bit CPU.

[root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
cpuFlags
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,npt,lbrv,svm_lock,nrip_save,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_athlon

Best RGDS

Hideo GOTO

P.S.
vdsClient tells us : kvmEnabled=true

__

Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Andrew Cathrow]

- Original Message -
> From: "Hideo GOTO" 
> To: users@ovirt.org
> Sent: Thursday, June 14, 2012 10:27:06 AM
> Subject: Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as   
> Opteron
> 
> Dear Yaniv Kaul,
> 
> Thanks for your propmt anwer.
> It seems that your patience did not allow your reading to continue
> after "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".

That sounds a little rude to me, maybe that's not the way you intended it.

Looking at the flags it looks like you are missing NX[1] this might be disabled 
in the bios, or perhaps not supported in the bios ?

[1] http://en.wikipedia.org/wiki/NX_bit
> 


> As reported in the last part of my previous mail, the output from
> vdsClient shows us that the processor is recognised as none of AMD
> Opteron G1, G2 or G3 (cpuFlags=...) . Thus, Quad-core AMD 2384 cannot
> match any of  Ovirt CPU type options. For confriming, I have just
> tried, upon reciept of your reply, to add the host to cluster of
> other
> CPU types (G1, G2 ..) , to get the same unfortunate result.
> 
> For your comparaison, here-below shows the "cpuFlags"  reported for
> an
> AMD Opteron 4284, which Ovirt can treat as either of AMD Opteron
> G3,G2
> and G1 :
> 
> [root@ovnode02 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
> cpuFlags
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,popcnt,aes,xsave,avx,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,xop,skinit,wdt,lwp,fma4,nodeid_msr,topoext,perfctr_core,arat,cpb,npt,lbrv,svm_lock,nrip_save,tsc_scale,vmcb_clean,flushbyasid,decodeassists,pausefilter,pfthreshold,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_qemu64,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1,model_Opteron_G2,model_Opteron_G3
> 
> 
> 2012/6/14 Hideo GOTO :
> > Dear sirs,
> >
> > We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384"
> > to
> > a working ovirt-node cluster ( CPU type of the cluster = "AMD
> > Opteron
> > G3". Existing node servers use AMD Opteron 4284) . Then, the
> > Ovirt-engine refuses to intergrate DL365-G5, reporting an error of
> > the
> > type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".
> >
> > Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they
> > are
> > KVM compatible? (This HP DL365 worked fine with VMWare).
> >
> > Any solution, advise, comment is wellcome, since we do not much
> > want
> > to revirt to VMWare.
> >
> > FIY, On the ovirt-engine's node information, "CPU Name" is reported
> > as
> > [N/A] and "CPU Type" as "Quad-Core AMD"
> >
> > Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
> > -
> > processor       : 7
> > vendor_id       : AuthenticAMD
> > cpu family      : 16
> > model           : 4
> > model name      : Quad-Core AMD Opteron(tm) Processor 2384
> > stepping        : 2
> > microcode       : 0x186
> > cpu MHz         : 2700.096
> > cache size      : 512 KB
> > physical id     : 1
> > siblings        : 4
> > core id         : 3
> > cpu cores       : 4
> > apicid          : 7
> > initial apicid  : 7
> > fpu             : yes
> > fpu_exception   : yes
> > cpuid level     : 5
> > wp              : yes
> > flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> > pge
> > mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
> > fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good
> > nopl
> > nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy
> > svm
> > extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
> > skinit
> > wdt npt lbrv svm_lock nrip_save
> > bogomips        : 5400.44
> > TLB size        : 1024 4K pages
> > clflush size    : 64
> > cache_alignment : 64
> > address sizes   : 48 bits physical, 48 bits virtual
> > power management: ts ttp tm stc 100mhzsteps hwpstate
> > ---
> >
> > According to vdsClient's info as shown below, Quad-core Opteron  is
> > recognized as if it were a good old 32 bit CPU.
> >
> > [root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
> > cpuFlags
> >        cpuFlags =
> > fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,npt,lbrv,svm_lock,nrip_save,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_athlon

Re: [Users] Storage - Local and iSCSI

[Itamar Heim]

On 06/14/2012 02:10 PM, Dennis Jacobfeuerborn wrote:

On 06/14/2012 12:41 PM, Omer Frenkel wrote:


 Is it possible with oVirt to use Local Storage and iSCSI at the same
 time for the same host?


 Best regards,
 Ricardo Esteves.
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

No, you choose storage type when defining the data center, and host can be
only in 1 DC at a given time


What if I have a bunch of NFS storage systems and what to move to iScsi?
Does that mean I have to move everything over in one fell swoop?
Having to choose either NFS or iSCSI for the entire datacenter seems
awfully restrictive.


in addition to dafna's suggestions for this.
allowing to use multiple storage types from same clusters/DC is on the 
roadmap

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Hideo GOTO]

Dear Yaniv Kaul,

Thanks for your propmt anwer.
It seems that your patience did not allow your reading to continue
after "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".

As reported in the last part of my previous mail, the output from
vdsClient shows us that the processor is recognised as none of AMD
Opteron G1, G2 or G3 (cpuFlags=...) . Thus, Quad-core AMD 2384 cannot
match any of  Ovirt CPU type options. For confriming, I have just
tried, upon reciept of your reply, to add the host to cluster of other
CPU types (G1, G2 ..) , to get the same unfortunate result.

For your comparaison, here-below shows the "cpuFlags"  reported for an
AMD Opteron 4284, which Ovirt can treat as either of AMD Opteron G3,G2
and G1 :

[root@ovnode02 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep cpuFlags
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,popcnt,aes,xsave,avx,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,xop,skinit,wdt,lwp,fma4,nodeid_msr,topoext,perfctr_core,arat,cpb,npt,lbrv,svm_lock,nrip_save,tsc_scale,vmcb_clean,flushbyasid,decodeassists,pausefilter,pfthreshold,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_qemu64,model_core2duo,model_n270,model_Conroe,model_Penryn,model_Nehalem,model_Westmere,model_Opteron_G1,model_Opteron_G2,model_Opteron_G3


2012/6/14 Hideo GOTO :
> Dear sirs,
>
> We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384" to
> a working ovirt-node cluster ( CPU type of the cluster = "AMD Opteron
> G3". Existing node servers use AMD Opteron 4284) . Then, the
> Ovirt-engine refuses to intergrate DL365-G5, reporting an error of the
> type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".
>
> Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they are
> KVM compatible? (This HP DL365 worked fine with VMWare).
>
> Any solution, advise, comment is wellcome, since we do not much want
> to revirt to VMWare.
>
> FIY, On the ovirt-engine's node information, "CPU Name" is reported as
> [N/A] and "CPU Type" as "Quad-Core AMD"
>
> Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
> -
> processor       : 7
> vendor_id       : AuthenticAMD
> cpu family      : 16
> model           : 4
> model name      : Quad-Core AMD Opteron(tm) Processor 2384
> stepping        : 2
> microcode       : 0x186
> cpu MHz         : 2700.096
> cache size      : 512 KB
> physical id     : 1
> siblings        : 4
> core id         : 3
> cpu cores       : 4
> apicid          : 7
> initial apicid  : 7
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 5
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
> fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
> nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
> wdt npt lbrv svm_lock nrip_save
> bogomips        : 5400.44
> TLB size        : 1024 4K pages
> clflush size    : 64
> cache_alignment : 64
> address sizes   : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
> ---
>
> According to vdsClient's info as shown below, Quad-core Opteron  is
> recognized as if it were a good old 32 bit CPU.
>
> [root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep cpuFlags
>        cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,npt,lbrv,svm_lock,nrip_save,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_athlon
>
> Best RGDS
>
> Hideo GOTO
>
> P.S.
> vdsClient tells us : kvmEnabled=true
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Itamar Heim]

On 06/14/2012 04:03 PM, Hideo GOTO wrote:

Dear sirs,

We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384" to
a working ovirt-node cluster ( CPU type of the cluster = "AMD Opteron
G3". Existing node servers use AMD Opteron 4284) . Then, the
Ovirt-engine refuses to intergrate DL365-G5, reporting an error of the
type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".

Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they are
KVM compatible? (This HP DL365 worked fine with VMWare).

Any solution, advise, comment is wellcome, since we do not much want
to revirt to VMWare.

FIY, On the ovirt-engine's node information, "CPU Name" is reported as
[N/A] and "CPU Type" as "Quad-Core AMD"

Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
-
processor   : 7
vendor_id   : AuthenticAMD
cpu family  : 16
model   : 4
model name  : Quad-Core AMD Opteron(tm) Processor 2384
stepping: 2
microcode   : 0x186
cpu MHz : 2700.096
cache size  : 512 KB
physical id : 1
siblings: 4
core id : 3
cpu cores   : 4
apicid  : 7
initial apicid  : 7
fpu : yes
fpu_exception   : yes
cpuid level : 5
wp  : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
wdt npt lbrv svm_lock nrip_save
bogomips: 5400.44
TLB size: 1024 4K pages
clflush size: 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
---

According to vdsClient's info as shown below, Quad-core Opteron  is
recognized as if it were a good old 32 bit CPU.

[root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep cpuFlags
 cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,npt,lbrv,svm_lock,nrip_save,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_athlon


list of models is what vdsm gets from libvirt, which tries to recognize 
supported models.


can you share 'virsh capabilities | grep model' from the host?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Test Day rpms uploaded (partially)

[Mike Burns]

On Thu, 2012-06-14 at 07:29 -0400, Mike Burns wrote:
> On Wed, 2012-06-13 at 17:11 -0400, Mike Burns wrote:
> > Helps if I give the repo definition:
> > 
> > [ovirt-beta]
> > name=Nightly builds of the oVirt project
> > baseurl=http://ovirt.org/releases/beta/fedora/$releasever/
> > enabled=0
> > skip_if_unavailable=1
> > gpgcheck=0
> > 
> > 
> > On Wed, 2012-06-13 at 17:10 -0400, Mike Burns wrote:
> > > RPMs for vdsm and ovirt-engine have been uploaded to ovirt.org.  Some of
> > > the various tools have not been updated yet, but are coming.
> > > 
> > > Ready:
> > > 
> > > ovirt-engine
> > > vdsm
> > > 
> > > RPMs exist but will likely be updated:
> > > log-collector
> > > iso-uploader
> > > image-uploader
> > > ovirt-engine-cli
> > > ovirt-engine-sdk
> 
> All of ^^ are updated
> 
> > > 
> > > RPMs not posted yet:
> > > ovirt-node
> 
> Not yet ^^

2.4.0 versions posted
> 
> > > ovirt-guest-agent
> 
> Done^^
> 
> > > 
> > > As new RPMs get uploaded, I will send additional updates.
> > > 
> > > Thanks
> > > 
> > > Mike
> > > 
> > > ___
> > > Arch mailing list
> > > a...@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/arch
> > 
> > 
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Yaniv Kaul]

- Original Message -
> Dear sirs,
> 
> We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384"
> to
> a working ovirt-node cluster ( CPU type of the cluster = "AMD Opteron
> G3". Existing node servers use AMD Opteron 4284) . Then, the
> Ovirt-engine refuses to intergrate DL365-G5, reporting an error of
> the
> type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".

Can you try and change the Cluster CPU type to an AMD type?
Y.

> 
> Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they
> are
> KVM compatible? (This HP DL365 worked fine with VMWare).
> 
> Any solution, advise, comment is wellcome, since we do not much want
> to revirt to VMWare.
> 
> FIY, On the ovirt-engine's node information, "CPU Name" is reported
> as
> [N/A] and "CPU Type" as "Quad-Core AMD"
> 
> Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
> -
> processor   : 7
> vendor_id   : AuthenticAMD
> cpu family  : 16
> model   : 4
> model name  : Quad-Core AMD Opteron(tm) Processor 2384
> stepping: 2
> microcode   : 0x186
> cpu MHz : 2700.096
> cache size  : 512 KB
> physical id : 1
> siblings: 4
> core id : 3
> cpu cores   : 4
> apicid  : 7
> initial apicid  : 7
> fpu : yes
> fpu_exception   : yes
> cpuid level : 5
> wp  : yes
> flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> pge
> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
> fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
> nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy
> svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs
> skinit
> wdt npt lbrv svm_lock nrip_save
> bogomips: 5400.44
> TLB size: 1024 4K pages
> clflush size: 64
> cache_alignment : 64
> address sizes   : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
> ---
> 
> According to vdsClient's info as shown below, Quad-core Opteron  is
> recognized as if it were a good old 32 bit CPU.
> 
> [root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep
> cpuFlags
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,npt,lbrv,svm_lock,nrip_save,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_athlon
> 
> Best RGDS
> 
> Hideo GOTO
> 
> P.S.
> vdsClient tells us : kvmEnabled=true
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Ovirt does'nt recognize "Quad-core AMD Opteron" as Opteron

[Hideo GOTO]

Dear sirs,

We added a HP DL365-G5 server with 2 x "Quad-core AMD Opteron 2384" to
a working ovirt-node cluster ( CPU type of the cluster = "AMD Opteron
G3". Existing node servers use AMD Opteron 4284) . Then, the
Ovirt-engine refuses to intergrate DL365-G5, reporting an error of the
type: "CPU_TYPE_INCOMPATIBLE_WITH_CLUSTER".

Ovirt (RHEV) does'nt support AMD Opteron 2xxx series , though they are
KVM compatible? (This HP DL365 worked fine with VMWare).

Any solution, advise, comment is wellcome, since we do not much want
to revirt to VMWare.

FIY, On the ovirt-engine's node information, "CPU Name" is reported as
[N/A] and "CPU Type" as "Quad-Core AMD"

Here below is the content of the /proc/cpuinfo on the HP DL365-G5:
-
processor   : 7
vendor_id   : AuthenticAMD
cpu family  : 16
model   : 4
model name  : Quad-Core AMD Opteron(tm) Processor 2384
stepping: 2
microcode   : 0x186
cpu MHz : 2700.096
cache size  : 512 KB
physical id : 1
siblings: 4
core id : 3
cpu cores   : 4
apicid  : 7
initial apicid  : 7
fpu : yes
fpu_exception   : yes
cpuid level : 5
wp  : yes
flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit
wdt npt lbrv svm_lock nrip_save
bogomips: 5400.44
TLB size: 1024 4K pages
clflush size: 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
---

According to vdsClient's info as shown below, Quad-core Opteron  is
recognized as if it were a good old 32 bit CPU.

[root@ovnode04 admin]# vdsClient -s 0 getVdsCaps|grep cpuFlags|grep cpuFlags
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,npt,lbrv,svm_lock,nrip_save,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_athlon

Best RGDS

Hideo GOTO

P.S.
vdsClient tells us : kvmEnabled=true
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Multiple Logical Networks on same physical nic

[Dan Kenigsberg]

On Thu, Jun 14, 2012 at 11:12:53AM +0100, Ricardo Esteves wrote:
> 
> Hi,
> 
> How can i set for example 2 Logical Network to use the same physical
> nic?
> 
> 
> Example:
> 
> Logical Networks: LAN1 (vlan 1), LAN2 (vlan 2),  iSCSI1 (vlan 11),
> iSCSI2 (vlan 12)
> Physical nics on host: eth0, eth1
> 
> 
> Attach LAN1 and LAN2 to eth0
> Attach iSCSI1 and iSCSI2 to eth1
> 
> 
> How can I accomplish this?

When defining the networks in the data center level, state their vlan
tags. Add the networks to your cluster. Then, when you add a host to the
cluster, state which nic is used for each of them.

ovirt supports multiple vlans over a single (or bonded) nic.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Network interfaces order

[Fabian Deutsch]

Hey,

Am Donnerstag, den 14.06.2012, 11:29 +0100 schrieb Ricardo Esteves:
> 
> Made it persistent using the command persist, after the reboot now the
> file is still there but the order of the nics still changes :(

The problem is deep in the boot process. 
But we've already got a bug entry for that problem:
https://bugzilla.redhat.com/show_bug.cgi?id=824595

Greetings
fabian


signature.asc
Description: This is a digitally signed message part
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Test Day rpms uploaded (partially)

[Mike Burns]

On Wed, 2012-06-13 at 17:11 -0400, Mike Burns wrote:
> Helps if I give the repo definition:
> 
> [ovirt-beta]
> name=Nightly builds of the oVirt project
> baseurl=http://ovirt.org/releases/beta/fedora/$releasever/
> enabled=0
> skip_if_unavailable=1
> gpgcheck=0
> 
> 
> On Wed, 2012-06-13 at 17:10 -0400, Mike Burns wrote:
> > RPMs for vdsm and ovirt-engine have been uploaded to ovirt.org.  Some of
> > the various tools have not been updated yet, but are coming.
> > 
> > Ready:
> > 
> > ovirt-engine
> > vdsm
> > 
> > RPMs exist but will likely be updated:
> > log-collector
> > iso-uploader
> > image-uploader
> > ovirt-engine-cli
> > ovirt-engine-sdk

All of ^^ are updated

> > 
> > RPMs not posted yet:
> > ovirt-node

Not yet ^^

> > ovirt-guest-agent

Done^^

> > 
> > As new RPMs get uploaded, I will send additional updates.
> > 
> > Thanks
> > 
> > Mike
> > 
> > ___
> > Arch mailing list
> > a...@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/arch
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Following Up on LinuxCon Japan Workshop

[Mike Burns]

On Wed, 2012-06-13 at 23:59 -0700, Leslie Hawthorn wrote:
> Hi Mike,
> 
> Thanks for your detailed feedback.
> 
> On 06/13/2012 04:41 PM, Mike Burns wrote:
> > - Audience Participation
> > How many attendees? How did the Q&A periods go? Would we like to prepare
> > a post-event attendee survey? (I recommend we do the survey and can
> > prepare some questions for the group if that's useful.)
> > I think we should prepare the survey in advance of the next workshop and
> > ask people to fill it out during the workshop, rather than coming back a
> > couple weeks after the fact.
> I have an attendee list from the Linux Foundation for each workshop, so 
> if we'd like to get the survey out this week it can happen. I believe I 
> can also find a resource to translate the survey into Japanese, though 
> that would mean a delay in sending it out.
> 
> Some suggested questions, I'd pare down to no more than 5.
> - What was your favorite talk?
> - What could we do to improve?
> - Were the talks too long? Too short?
> - Was the presentation material clear to you?
> - Are you currently using or interested in using oVirt?
> - Are you interested in contributing to the oVirt community?
> 
> Cheers,
> LH
> 
> 

If you think it's worth it, then go for it.  Feedback is always good.

Mike

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Storage - Local and iSCSI

[Dafna Ron]

On 06/14/2012 02:10 PM, Dennis Jacobfeuerborn wrote:
> On 06/14/2012 12:41 PM, Omer Frenkel wrote:
>> Is it possible with oVirt to use Local Storage and iSCSI at the same
>> time for the same host?
>>  
>>
>> Best regards,
>> Ricardo Esteves.
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>> No, you choose storage type when defining the data center, and host can be
>> only in 1 DC at a given time
> What if I have a bunch of NFS storage systems and what to move to iScsi?
> Does that mean I have to move everything over in one fell swoop?
> Having to choose either NFS or iSCSI for the entire datacenter seems
> awfully restrictive.
>
> Regards,
>   Dennis

you can create more than one Data Center.
one can be iSCSI and one can be NFS.
moving the hosts and VM's can be done gradually to the new Data center
or you can choose to run some on one Data Center and some of the other.

> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


-- 
Dafna Ron
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Storage - Local and iSCSI

[Dennis Jacobfeuerborn]

On 06/14/2012 12:41 PM, Omer Frenkel wrote:
> 
> Is it possible with oVirt to use Local Storage and iSCSI at the same
> time for the same host?
>  
> 
> Best regards,
> Ricardo Esteves.
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
> No, you choose storage type when defining the data center, and host can be
> only in 1 DC at a given time

What if I have a bunch of NFS storage systems and what to move to iScsi?
Does that mean I have to move everything over in one fell swoop?
Having to choose either NFS or iSCSI for the entire datacenter seems
awfully restrictive.

Regards,
  Dennis
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Failed to build (ovirt version 3.1.0_0001)

[зоррыч]

 

An error in the encoding:

 

[INFO] [resources:testResources {execution: default-testResources}]

[INFO] Using 'UTF-8' encoding to copy filtered resources.

[INFO] skip non existing resourceDirectory
/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/resources

[INFO] [compiler:testCompile {execution: default-testCompile}]

[INFO] Compiling 22 source files to
/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
target/test-classes

[INFO]


[ERROR] BUILD FAILURE

[INFO]


[INFO] Compilation failure

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,83] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,84] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,86] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,87] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,89] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,90] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,91] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,92] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,93] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,94] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,96] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,97] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,98] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,99] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,101] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,102] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,103] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,104] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,110] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,111] unmappable character for encoding ASCII

 

/root/rpmbuild/BUILD/ovirt-engine-3.1.0_0001/backend/manager/modules/common/
src/test/java/org/ovirt/engine/core/common/utils/ValidationUtilsTest.java:[2
6,112] unmappable character for encoding ASC

Re: [Users] Storage - Local and iSCSI

[Omer Frenkel]

- Original Message -

> From: "Ricardo Esteves" 
> To: users@ovirt.org
> Sent: Thursday, June 14, 2012 1:11:52 PM
> Subject: [Users] Storage - Local and iSCSI

> Hi,

> Is it possible with oVirt to use Local Storage and iSCSI at the same
> time for the same host?

> Best regards,
> Ricardo Esteves.
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

No, you choose storage type when defining the data center, and host can be only 
in 1 DC at a given time 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Network interfaces order

[Ricardo Esteves]

This happens on the oVirt node.

I've added the file /etc/udev/rules.d/70-persistent-net.rules with the
next lines:

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="d4:85:64:48:42:c0", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth0"

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="d4:85:64:48:42:c4", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1"

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="1c:c1:de:7b:71:30", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth2"

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="1c:c1:de:7b:71:32", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth3"



Made it persistent using the command persist, after the reboot now the
file is still there but the order of the nics still changes :(

-Original Message-
From: Fabian Deutsch 
To: Ricardo Esteves 
Cc: users@ovirt.org
Subject: Re: [Users] Network interfaces order
Date: Thu, 14 Jun 2012 11:56:38 +0200


Hi,

Am Donnerstag, den 14.06.2012, 10:53 +0100 schrieb Ricardo Esteves:

> Every time i reboot my servers, my network interfaces change order and
> i have to apply network configuration again.

Where does this happen? On oVirt Node or somewhere else?

> Anyway to make the order of the nics persistent? I added a udev rule
> but when I reboot it disappears. 

If it's Node then the appropriate file has to be persisted to survive a
reboot. (persist MYFILE)

Greetings
- fabian



> Best regards,
> 
> Ricardo Esteves.
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

<>___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Multiple Logical Networks on same physical nic

[Ricardo Esteves]

Hi,

How can i set for example 2 Logical Network to use the same physical
nic?


Example:

Logical Networks: LAN1 (vlan 1), LAN2 (vlan 2),  iSCSI1 (vlan 11),
iSCSI2 (vlan 12)
Physical nics on host: eth0, eth1


Attach LAN1 and LAN2 to eth0
Attach iSCSI1 and iSCSI2 to eth1


How can I accomplish this?


Best regards,
Ricardo Esteves. 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Storage - Local and iSCSI

[Ricardo Esteves]

Hi,


Is it possible with oVirt to use Local Storage and iSCSI at the same
time for the same host?
 

Best regards,
Ricardo Esteves.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Itamar Heim]

On 06/14/2012 10:50 AM, Dafna Ron wrote:

On 06/14/2012 10:49 AM, Itamar Heim wrote:

On 06/14/2012 10:48 AM, Dafna Ron wrote:

NFS is always slower because we will always create a preallocated disk.
I would say that 30 minutes for 10GB on NFS might be a little slow but
not significantly.



Dafna - it will create RAW, not pre-allocated, right?



yes, sorry, my mistake :)
it will create RAW disk type which will always take longer


longer than what? it's not related to NFS.
creating a template requires to copy all relevant blocks, same as for 
other storage types.





On 06/14/2012 10:12 AM, Rahul Upadhyaya wrote:

The machine that is the SPM has 32Gb of RAM. My storage layout is on a
NFS. Is that the reason of the longer time taken, is 30mins for
template creation under expected time of a NFS ?

On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heimmailto:ih...@redhat.com>>   wrote:

  On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:

  Hi Folks,

  Template creation time for me is around 30mins for a 10 GB
  (Disk Space)
  VM. My oVirt Manager has 4GB RAM. Is this within expected
time for
  template creation, if not, then what could I check to possibly
  improve
  the performance in this regards ?


  the template creation happens on the SPM, not on the manager
  (unless you are running all in one).

  what's the storage layout you have?


  --
  Regards,
  Rahul
  ===



  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users





--
Regards,
Rahul
===



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users










___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Network interfaces order

[Fabian Deutsch]

Hi,

Am Donnerstag, den 14.06.2012, 10:53 +0100 schrieb Ricardo Esteves:

> Every time i reboot my servers, my network interfaces change order and
> i have to apply network configuration again.

Where does this happen? On oVirt Node or somewhere else?

> Anyway to make the order of the nics persistent? I added a udev rule
> but when I reboot it disappears. 

If it's Node then the appropriate file has to be persisted to survive a
reboot. (persist MYFILE)

Greetings
- fabian



> Best regards,
> 
> Ricardo Esteves.
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users



signature.asc
Description: This is a digitally signed message part
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Network interfaces order

[Ricardo Esteves]

Hi,

 

Every time i reboot my servers, my network interfaces change order and i
have to apply network configuration again.

 

Anyway to make the order of the nics persistent? I added a udev rule but
when I reboot it disappears. 

 

Best regards,

Ricardo Esteves.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Yaniv Kaul]

On 06/14/2012 10:36 AM, Itamar Heim wrote:

On 06/14/2012 10:12 AM, Rahul Upadhyaya wrote:

The machine that is the SPM has 32Gb of RAM. My storage layout is on a
NFS. Is that the reason of the longer time taken, is 30mins for template
creation under expected time of a NFS ?


how many spindles does the NFS has?
what's your bandwidth to it?


My guess - 100Mbps link to the storage.
Y.



30 minutes sounds a bit slow to me, but depends on the network and 
storage as well

what do you see from i/o behavior on the SPM?
on network utilization?



On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heim mailto:ih...@redhat.com>> wrote:

On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:

Hi Folks,

Template creation time for me is around 30mins for a 10 GB (Disk
Space)
VM. My oVirt Manager has 4GB RAM. Is this within expected 
time for

template creation, if not, then what could I check to possibly
improve
the performance in this regards ?


the template creation happens on the SPM, not on the manager (unless
you are running all in one).

what's the storage layout you have?


--
Regards,
Rahul
==__=



_
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/__mailman/listinfo/users






--
Regards,
Rahul
===



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Dafna Ron]

On 06/14/2012 10:49 AM, Itamar Heim wrote:
> On 06/14/2012 10:48 AM, Dafna Ron wrote:
>> NFS is always slower because we will always create a preallocated disk.
>> I would say that 30 minutes for 10GB on NFS might be a little slow but
>> not significantly.
>>
>
> Dafna - it will create RAW, not pre-allocated, right?
>

yes, sorry, my mistake :)
it will create RAW disk type which will always take longer
>>
>>
>> On 06/14/2012 10:12 AM, Rahul Upadhyaya wrote:
>>> The machine that is the SPM has 32Gb of RAM. My storage layout is on a
>>> NFS. Is that the reason of the longer time taken, is 30mins for
>>> template creation under expected time of a NFS ?
>>>
>>> On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heim>> >  wrote:
>>>
>>>  On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:
>>>
>>>  Hi Folks,
>>>
>>>  Template creation time for me is around 30mins for a 10 GB
>>>  (Disk Space)
>>>  VM. My oVirt Manager has 4GB RAM. Is this within expected
>>> time for
>>>  template creation, if not, then what could I check to possibly
>>>  improve
>>>  the performance in this regards ?
>>>
>>>
>>>  the template creation happens on the SPM, not on the manager
>>>  (unless you are running all in one).
>>>
>>>  what's the storage layout you have?
>>>
>>>
>>>  --
>>>  Regards,
>>>  Rahul
>>>  ===
>>>
>>>
>>>
>>>  ___
>>>  Users mailing list
>>>  Users@ovirt.org
>>>  http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>>
>>>
>>>
>>> -- 
>>> Regards,
>>> Rahul
>>> ===
>>>
>>>
>>>
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>


-- 
Dafna Ron
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Itamar Heim]

On 06/14/2012 10:48 AM, Dafna Ron wrote:

NFS is always slower because we will always create a preallocated disk.
I would say that 30 minutes for 10GB on NFS might be a little slow but
not significantly.



Dafna - it will create RAW, not pre-allocated, right?




On 06/14/2012 10:12 AM, Rahul Upadhyaya wrote:

The machine that is the SPM has 32Gb of RAM. My storage layout is on a
NFS. Is that the reason of the longer time taken, is 30mins for
template creation under expected time of a NFS ?

On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heimmailto:ih...@redhat.com>>  wrote:

 On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:

 Hi Folks,

 Template creation time for me is around 30mins for a 10 GB
 (Disk Space)
 VM. My oVirt Manager has 4GB RAM. Is this within expected time for
 template creation, if not, then what could I check to possibly
 improve
 the performance in this regards ?


 the template creation happens on the SPM, not on the manager
 (unless you are running all in one).

 what's the storage layout you have?


 --
 Regards,
 Rahul
 ===



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users





--
Regards,
Rahul
===



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Dafna Ron]

NFS is always slower because we will always create a preallocated disk.
I would say that 30 minutes for 10GB on NFS might be a little slow but
not significantly.



On 06/14/2012 10:12 AM, Rahul Upadhyaya wrote:
> The machine that is the SPM has 32Gb of RAM. My storage layout is on a
> NFS. Is that the reason of the longer time taken, is 30mins for
> template creation under expected time of a NFS ?
>
> On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heim  > wrote:
>
> On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:
>
> Hi Folks,
>
> Template creation time for me is around 30mins for a 10 GB
> (Disk Space)
> VM. My oVirt Manager has 4GB RAM. Is this within expected time for
> template creation, if not, then what could I check to possibly
> improve
> the performance in this regards ?
>
>
> the template creation happens on the SPM, not on the manager
> (unless you are running all in one).
>
> what's the storage layout you have?
>
>
> --
> Regards,
> Rahul
> ===
>
>
>
> ___
> Users mailing list
> Users@ovirt.org 
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
>
> -- 
> Regards,
> Rahul
> ===
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


-- 
Dafna Ron
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Itamar Heim]

On 06/14/2012 10:12 AM, Rahul Upadhyaya wrote:

The machine that is the SPM has 32Gb of RAM. My storage layout is on a
NFS. Is that the reason of the longer time taken, is 30mins for template
creation under expected time of a NFS ?


how many spindles does the NFS has?
what's your bandwidth to it?

30 minutes sounds a bit slow to me, but depends on the network and 
storage as well

what do you see from i/o behavior on the SPM?
on network utilization?



On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heim mailto:ih...@redhat.com>> wrote:

On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:

Hi Folks,

Template creation time for me is around 30mins for a 10 GB (Disk
Space)
VM. My oVirt Manager has 4GB RAM. Is this within expected time for
template creation, if not, then what could I check to possibly
improve
the performance in this regards ?


the template creation happens on the SPM, not on the manager (unless
you are running all in one).

what's the storage layout you have?


--
Regards,
Rahul
==__=



_
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/__mailman/listinfo/users






--
Regards,
Rahul
===



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Template creation time is high.

[Rahul Upadhyaya]

The machine that is the SPM has 32Gb of RAM. My storage layout is on a NFS.
Is that the reason of the longer time taken, is 30mins for template
creation under expected time of a NFS ?

On Thu, Jun 14, 2012 at 12:20 PM, Itamar Heim  wrote:

> On 06/14/2012 09:28 AM, Rahul Upadhyaya wrote:
>
>> Hi Folks,
>>
>> Template creation time for me is around 30mins for a 10 GB (Disk Space)
>> VM. My oVirt Manager has 4GB RAM. Is this within expected time for
>> template creation, if not, then what could I check to possibly improve
>> the performance in this regards ?
>>
>
> the template creation happens on the SPM, not on the manager (unless you
> are running all in one).
>
> what's the storage layout you have?
>
>
>> --
>> Regards,
>> Rahul
>> ==**=
>>
>>
>>
>> __**_
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/**mailman/listinfo/users
>>
>
>


-- 
Regards,
Rahul
===
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Following Up on LinuxCon Japan Workshop

[Leslie Hawthorn]

Hi Mike,

Thanks for your detailed feedback.

On 06/13/2012 04:41 PM, Mike Burns wrote:

- Audience Participation
How many attendees? How did the Q&A periods go? Would we like to prepare
a post-event attendee survey? (I recommend we do the survey and can
prepare some questions for the group if that's useful.)
I think we should prepare the survey in advance of the next workshop and
ask people to fill it out during the workshop, rather than coming back a
couple weeks after the fact.
I have an attendee list from the Linux Foundation for each workshop, so 
if we'd like to get the survey out this week it can happen. I believe I 
can also find a resource to translate the survey into Japanese, though 
that would mean a delay in sending it out.


Some suggested questions, I'd pare down to no more than 5.
- What was your favorite talk?
- What could we do to improve?
- Were the talks too long? Too short?
- Was the presentation material clear to you?
- Are you currently using or interested in using oVirt?
- Are you interested in contributing to the oVirt community?

Cheers,
LH


--
Leslie Hawthorn
Community Action and Impact
Open Source and Standards @ Red Hat

identi.ca/lh
twitter.com/lhawthorn

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users