Re: [ovirt-users] VDSM doesn't start in new ovirt host
On 07/14/2014 02:17 PM, André Freitas wrote: Hi to all. Today i was trying to add a third host to my existing ovirt 3.4 cluster but i can't because it stays in non-responsive status. The steps that i did were: 1ª minimal instalation of CentOS 6.5 with SeLinux disabled 2º yum localinstall http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm -y 3º add the new host by ovirt engine webpage In /var/log/messages of the third host (the one that i'm trying to add) i receive a lot of this messages Jul 14 19:03:37 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:37 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:39 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly for more than 30 seconds, master sleeping for 900 seconds All the research that i did all go to this https://bugzilla.redhat.com/show_bug.cgi?id=1055153 but i have all the correct permissions on my logs [root@s1 mailto:root@s1 ~]# ls -l /var/log/vdsm/ total 16 drwxr-xr-x. 2 vdsm kvm 4096 Jun 9 22:25 backup -rw-r--r--. 1 vdsm kvm 0 Jul 14 15:27 metadata.log -rw-r--r--. 1 vdsm kvm 0 Jul 14 15:27 mom.log -rw-r--r--. 1 root root 11039 Jul 14 18:32 supervdsm.log -rw-r--r--. 1 vdsm kvm 0 Jul 14 15:27 vdsm.log i have put the log referring the instalation of this host in http://ur1.ca/hr3x7 (/var/log/ovirt-engine/host-deploy) Can anyone help me? Oi André, What's the version of your python-pthreading? Depending of version of python-pthreading you might be facing: http://lists.ovirt.org/pipermail/users/2014-July/025979.html -- Cheers Douglas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Self-hosted Engine
Are the official instructions for the setting up the self-hosted engine applicable to a fresh install (either CentOS or Fedora)? Basically I am looking to see uf it is possible to basically do an all-oin-one install but with the engine asca self-hosted VM insread of on the host itself. Thanks! -Alan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Host installation failed. Network error during communication with the host.
Hi, I want to add one host to Ovirt Engine...but it's failed with the following error :- Host installation failed. Network error during communication with the host. Engine Log :- 2014-07-15 15:02:54,823 INFO [org.ovirt.engine.core.bll.InstallerMessages] (VdsDeploy) Installation 117.18.79.132: Starting vdsm 2014-07-15 15:02:54,846 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) Correlation ID: 1578d1a4, Call Stack: null, Custom Event ID: -1, Message: Installing Host Quanta. Starting vdsm. 2014-07-15 15:02:57,397 INFO [org.ovirt.engine.core.bll.InstallerMessages] (VdsDeploy) Installation 117.18.79.132: Stage: Pre-termination 2014-07-15 15:02:57,420 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) Correlation ID: 1578d1a4, Call Stack: null, Custom Event ID: -1, Message: Installing Host Quanta. Stage: Pre-termination. 2014-07-15 15:02:57,432 INFO [org.ovirt.engine.core.bll.InstallerMessages] (VdsDeploy) Installation 117.18.79.132: Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-20140715150257-117.18.79.132-1578d1a4.log' 2014-07-15 15:02:57,454 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) Correlation ID: 1578d1a4, Call Stack: null, Custom Event ID: -1, Message: Installing Host Quanta. Retrieving installation logs to: '/var/log/ovirt-engine/host-deploy/ovirt-20140715150257-117.18.79.132-1578d1a4.log'. 2014-07-15 15:02:57,987 INFO [org.ovirt.engine.core.bll.InstallerMessages] (VdsDeploy) Installation 117.18.79.132: Stage: Termination 2014-07-15 15:02:58,020 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (VdsDeploy) Correlation ID: 1578d1a4, Call Stack: null, Custom Event ID: -1, Message: Installing Host Quanta. Stage: Termination. 2014-07-15 15:02:58,085 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-6-thread-4) [1578d1a4] java.util.concurrent.ExecutionException: java.lang.reflect.InvocationTargetException 2014-07-15 15:02:58,102 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-6-thread-4) [1578d1a4] Command PollVDSCommand(HostName = Quanta, HostId = 7ae46f46-0b00-47b6-880c-7fd93354c3c5) execution failed. Exception: RuntimeException: java.util.concurrent.ExecutionException: java.lang.reflect.InvocationTargetException 2014-07-15 15:02:58,603 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-6-thread-4) [1578d1a4] java.util.concurrent.ExecutionException: java.lang.reflect.InvocationTargetException 2014-07-15 15:02:58,620 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.PollVDSCommand] (org.ovirt.thread.pool-6-thread-4) [1578d1a4] Command PollVDSCommand(HostName = Quanta, HostId = 7ae46f46-0b00-47b6-880c-7fd93354c3c5) execution failed. Exception: RuntimeException: java.util.concurrent.ExecutionException: java.lang.reflect.InvocationTargetException Thanks, Punit ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM HostedEngie is down. Exist message: internal error Failed to acquire lock error -243
Hi, since the bug 1093366 is evidently blocking the Hosted Engine feature, it should be added as blocker for the oVirt 3.4.3 tracker (bug 1107968). All the more so now that the proposed patches seems to have fixed the problem (I've run at least 30 Hosted Engine migrations without errors). Thank you, Stefano. On 06/06/2014 05:12 AM, Andrew Lau wrote: Hi, I'm seeing this weird message in my engine log 2014-06-06 03:06:09,380 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-79) RefreshVmList vm id 85d4cfb9-f063-4c7c-a9f8-2b74f5f7afa5 status = WaitForLaunch on vds ov-hv2-2a-08-23 ignoring it in the refresh until migration is done 2014-06-06 03:06:12,494 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (DefaultQuartzScheduler_Worker-89) START, DestroyVDSCommand(HostName = ov-hv2-2a-08-23, HostId = c04c62be-5d34-4e73-bd26-26f805b2dc60, vmId=85d4cfb9-f063-4c7c-a9f8-2b74f5f7afa5, force=false, secondsToWait=0, gracefully=false), log id: 62a9d4c1 2014-06-06 03:06:12,561 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DestroyVDSCommand] (DefaultQuartzScheduler_Worker-89) FINISH, DestroyVDSCommand, log id: 62a9d4c1 2014-06-06 03:06:12,652 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-89) Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM HostedEngine is down. Exit message: internal error Failed to acquire lock: error -243. It also appears to occur on the other hosts in the cluster, except the host which is running the hosted-engine. So right now 3 servers, it shows up twice in the engine UI. The engine VM continues to run peacefully, without any issues on the host which doesn't have that error. Any ideas? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Backup solutions for Ovirt
Hi All, I am using Ovirt for my QA environment almost 15 virtual servers, and it is working as expected. The only thing I am worried about is the backup solutions in case of failure or system crash. I tried looking into the LVM structure that is created by Ovirt but it seems a bit complex. Please let me know the proper solution (if there is any) for backing up my environment in case of failure. Best Regards, -- Saurabh Kumar System Admin Red Hat Certified Engineer (RHCE) Red Hat Certified System Administrator (RHCSA) Red Hat Certified Virtualization Administrator (RHCVA) Red Hat Certified Server Hardening Expert (RH-413) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDSM doesn't start in new ovirt host
I have removed vdsm and libvirt from that host before the reinstalation of the host in ovirt engine but the problem persists with s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave. i have put the new log referring to this instalation in http://ur1.ca/hrc7d Best regards, -- André Freitas André Freitas System Network Administrator | (+351) 234 484 466 ISO 9001 CMMI Level 2 Ubiwhere Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. -Original Message- From: Sven Kieske svenkie...@gmail.com To: users@ovirt.org Subject: Re: [ovirt-users] VDSM doesn't start in new ovirt host Date: Mon, 14 Jul 2014 21:24:02 +0200 -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 14.07.2014 20:17, André Freitas wrote: Hi to all. Today i was trying to add a third host to my existing ovirt 3.4 cluster but i can't because it stays in non-responsive status. The steps that i did were: 1ª minimal instalation of CentOS 6.5 with SeLinux disabled 2º yum localinstall http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm -y 3º add the new host by ovirt engine webpage In /var/log/messages of the third host (the one that i'm trying to add) i receive a lot of this messages Jul 14 19:03:37 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:37 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:38 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave Jul 14 19:03:39 s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly for more than 30 seconds, master sleeping for 900 seconds All the research that i did all go to this https://bugzilla.redhat.com/show_bug.cgi?id=1055153 but i have all the correct permissions on my logs [root@s1 ~]# ls -l /var/log/vdsm/ total 16 drwxr-xr-x. 2 vdsm kvm 4096 Jun 9 22:25 backup -rw-r--r--. 1 vdsm kvm 0 Jul 14 15:27 metadata.log -rw-r--r--. 1 vdsm kvm 0 Jul 14 15:27 mom.log -rw-r--r--. 1 root root 11039 Jul 14 18:32 supervdsm.log -rw-r--r--. 1 vdsm kvm 0 Jul 14 15:27 vdsm.log i have put the log referring the instalation of this host in http://ur1.ca/hr3x7 (/var/log/ovirt-engine/host-deploy) Can anyone help me? Best regards, As far as I can tell, the error boils down to the following lines from your host-deploy log: Starting up vdsm daemon: [ OK ] vdsm start[ OK ] 2014-07-14 18:32:06 DEBUG otopi.plugins.otopi.services.rhel plugin.execute:866 execute-output: ('/sbin/service', 'vdsmd', 'start') stderr: initctl: Job is already running: libvirtd so you might want to try to re-deploy (click reinstall in webadmin) but make sure vdsm and libvirtd are of prior to the deployment. Are you sure they weren't started(maybe by someone else)? HTH kind regards Sven -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.22 (MingW32) iQGcBAEBAgAGBQJTxC5SAAoJEAq0kGAWDrqleiML/34+U87ZKjbYDs4FtZFbncdW qj83hoaei9G2W3QuASwmwIehMFuMoMdyCePk2kNzNoGwSrgWzmwxDeI0SkXBwoDS X4J9NpZhm5dJggf4oMAk1osc2B6HEwGUH4J6WukBYhinnkVTW+hGRqJiTadgVZtw MfAB4T+UbQ0mE8noD363bI8goNaFB5/XfUy5Yd+I9cNZYApCGE1CfyNEvFRF+nji ria1B2vyiW398HL1/i7fGb49pIakg1zAp3lUA7KXpwIYXrlwFfxUHdSTH5uPY6nO QM906MtAhVSHcnkn6OSMUhtzxtKXiXo1DXkRo0IYmurWZvIMVhri85MEV56UQiRi oNPpFzHW5EZExI+FnQmfJJwNWnQ3/UKlmtoI+ljsgGDbnrOeBn4sekVSfhMipBLj OzNTUU2ytEDAwEcC9FMwUdJqsTK87rJCorNrXvZRCVkjDFKWqKp7U1hKpn+IJi6u ALGaVn6zKcNlisc/UrMHwb5sSg3sT/cJiePUDerORg== =Vapy -END PGP SIGNATURE- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org
Re: [ovirt-users] VDSM doesn't start in new ovirt host
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Am 15.07.2014 11:17, schrieb André Freitas: I have removed vdsm and libvirt from that host before the reinstalation of the host in ovirt engine but the problem persists with s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave. i have put the new log referring to this instalation in http://ur1.ca/hrc7d Best regards, Hi, can you try to downgrade the package python-pthreading using yum? don't install 0.1.3-2 as it breaks your host, updated 0.1.3-3 is not yet available in epel. 0.1.2 should be safe. HTH - -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen -BEGIN PGP SIGNATURE- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJTxPaTAAoJEC5d3lL7/I9zlNwQALcWjMEGjRQ+6e4j6xxrDEPs unU4ZTn3YKXpzysPBURSq2ULw5c5kRWRurOVaLaKM/IZHjYNN924tlJeIP36IUFs FMWokT78HDDfgPJi9BK/T6YIkdN7g9BKFDPGqDiypt6nCEjlNSfKOF6vzu93LJ+b 5bpxFuuE5lqdUD5J43foHsZ8zllpJjP2RUa3lcmgkXz8R7LZkwvEAscEsAZ+i9YL qAYQoSGiIfbC/Kg5i6uGs4TJVoRejmGQUd9UtgJSwEMM7KSsFzenYbvTY74GlKhY CwXqG3BmZuwOJ0EBtoLXBmesV/wiTdyYO73PDXxl9kZI4ZRMnx6anQ61QTKw3J1b NZN8GoEPv3MCW0Q6APVJy76w7NvWwP758b65ioi6CFid6aVN4aaQUuTAUvTh428A SzIym+oY+MEs3yCBbMnJu7euEU9hWWUZeRUTGALH3aQeKVegcEtDn2zdyKP3FSqp CMYyVVG4E4BMi7pp1kqkbtD9BcEIPdVmIGNTSGKJkfrxUW54PGD90d/not8Xtx7p SDjLcMb6PdmckGK2DqFEYqzZWgYTpcMNsLvqvJmR9/IyzfYDG6/O+yGjYutH9MG6 fWmgGtbNOtX/yVcO4DQOOQaHQWbEt/sSNcF96gKx81KfvWw8lMO27qhn8+daQj/L M7uLrkKBHOxmwWQO5u4t =bXS/ -END PGP SIGNATURE- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDSM doesn't start in new ovirt host
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2014-07-15 11:36, Sven Kieske wrote: Am 15.07.2014 11:17, schrieb André Freitas: I have removed vdsm and libvirt from that host before the reinstalation of the host in ovirt engine but the problem persists with s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave. i have put the new log referring to this instalation in http://ur1.ca/hrc7d Best regards, Hi, can you try to downgrade the package python-pthreading using yum? don't install 0.1.3-2 as it breaks your host, updated 0.1.3-3 is not yet available in epel. 0.1.2 should be safe. HTH ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users As I got stucked with the same error since yesterday I will confirm this solution did the trick. Now I got the new host up and running. Thanks Ricky Schneberger -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlPE+psACgkQOap81biMC2NkUQCeLLC61MxWjxOvxNKfFITu6Q9v BNgAnRSKCGMvX7fbEQsCGQkSehIlPy65 =wQxT -END PGP SIGNATURE- 0xB88C0B63.asc Description: application/pgp-keys ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VDSM doesn't start in new ovirt host
hi, i have installed the new version indicated in http://lists.ovirt.org/pipermail/users/2014-July/025979.html an now my host concludes the installation with sucess. -- André Freitas André Freitas System Network Administrator | (+351) 234 484 466 ISO 9001 CMMI Level 2 Ubiwhere Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. -Original Message- From: Sven Kieske s.kie...@mittwald.de To: users@ovirt.org users@ovirt.org Subject: Re: [ovirt-users] VDSM doesn't start in new ovirt host Date: Tue, 15 Jul 2014 09:36:09 + -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Am 15.07.2014 11:17, schrieb André Freitas: I have removed vdsm and libvirt from that host before the reinstalation of the host in ovirt engine but the problem persists with s1 respawn: slave '/usr/share/vdsm/vdsm --pidfile /var/run/vdsm/vdsmd.pid' died too quickly, respawning slave. i have put the new log referring to this instalation in http://ur1.ca/hrc7d Best regards, Hi, can you try to downgrade the package python-pthreading using yum? don't install 0.1.3-2 as it breaks your host, updated 0.1.3-3 is not yet available in epel. 0.1.2 should be safe. HTH - -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen -BEGIN PGP SIGNATURE- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJTxPaTAAoJEC5d3lL7/I9zlNwQALcWjMEGjRQ+6e4j6xxrDEPs unU4ZTn3YKXpzysPBURSq2ULw5c5kRWRurOVaLaKM/IZHjYNN924tlJeIP36IUFs FMWokT78HDDfgPJi9BK/T6YIkdN7g9BKFDPGqDiypt6nCEjlNSfKOF6vzu93LJ+b 5bpxFuuE5lqdUD5J43foHsZ8zllpJjP2RUa3lcmgkXz8R7LZkwvEAscEsAZ+i9YL qAYQoSGiIfbC/Kg5i6uGs4TJVoRejmGQUd9UtgJSwEMM7KSsFzenYbvTY74GlKhY CwXqG3BmZuwOJ0EBtoLXBmesV/wiTdyYO73PDXxl9kZI4ZRMnx6anQ61QTKw3J1b NZN8GoEPv3MCW0Q6APVJy76w7NvWwP758b65ioi6CFid6aVN4aaQUuTAUvTh428A SzIym+oY+MEs3yCBbMnJu7euEU9hWWUZeRUTGALH3aQeKVegcEtDn2zdyKP3FSqp CMYyVVG4E4BMi7pp1kqkbtD9BcEIPdVmIGNTSGKJkfrxUW54PGD90d/not8Xtx7p SDjLcMb6PdmckGK2DqFEYqzZWgYTpcMNsLvqvJmR9/IyzfYDG6/O+yGjYutH9MG6 fWmgGtbNOtX/yVcO4DQOOQaHQWbEt/sSNcF96gKx81KfvWw8lMO27qhn8+daQj/L M7uLrkKBHOxmwWQO5u4t =bXS/ -END PGP SIGNATURE- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Live Storage migration doesn't work
Hi, I'm trying to move a disk of a virtual machine administration (that is online) to a different nfs storage, but despite the success of the task Creating VM Snapshot Auto-generated for Live Storage Migration for VM administration in the web page of ovirt engine, it doesn't move the disk to the new storage. This is the log in engine.log http://ur1.ca/hrcvt How can i resolve this? Best regards, -- André Freitas André Freitas System Network Administrator | (+351) 234 484 466 ISO 9001 CMMI Level 2 Ubiwhere Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Neutron - oVirt Integration
Hi All, I am working on the Nova - oVirt driver as mentioned in the blueprint - https://blueprints.launchpad.net/nova/+spec/rhev-m-ovirt-clusters-as-compute-resources. I am currently to integrate neutron with ovirt during a VM launch, for below use case. Use Case:- 1. Import the Neutron as external provider into oVirt. 2. VM is Launched in OpenStack - which launches VM on oVirt. 3. Assign the IP assigned by the OpenStack to the oVirt VM and connect to the imported OpenStack Network. I have completed Step 1 and Step 2. Can anyone help me with possible approaches to Step 3? Thank You, Regards, Udaya Kiran___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] iptables question
Hi all, I have a simple question, is iptables if I never plan to use NAT:d guests? Niklas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Live Storage migration doesn't work
If you havent already done so, replace your qemu-* packages with the ones listed at the jekins site http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/ws/rpms/ - Original Message - From: André Freitas afrei...@ubiwhere.com To: users@ovirt.org Sent: Tuesday, July 15, 2014 6:13:03 AM Subject: [ovirt-users] Live Storage migration doesn't work Hi, I'm trying to move a disk of a virtual machine administration (that is online) to a different nfs storage, but despite the success of the task Creating VM Snapshot Auto-generated for Live Storage Migration for VM administration in the web page of ovirt engine, it doesn't move the disk to the new storage. This is the log in engine.log http://ur1.ca/hrcvt How can i resolve this? Best regards, -- André Freitas System Network Administrator | (+351) 234 484 466 Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Self-hosted Engine
Yes. I did a fresh install on Fedora 19 as a single hosted solution and it's working well except for an inability to cleanly shut down the system due to a problem with sanlock leases. -Bob On Jul 15, 2014 2:20 AM, Alan Murrell li...@murrell.ca wrote: Are the official instructions for the setting up the self-hosted engine applicable to a fresh install (either CentOS or Fedora)? Basically I am looking to see uf it is possible to basically do an all-oin-one install but with the engine asca self-hosted VM insread of on the host itself. Thanks! -Alan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Neutron - oVirt Integration
- Original Message - From: Udaya Kiran P ukiran...@yahoo.in To: users users@ovirt.org Sent: Tuesday, July 15, 2014 1:22:15 PM Subject: [ovirt-users] Neutron - oVirt Integration Hi All, I am working on the Nova - oVirt driver as mentioned in the blueprint - https://blueprints.launchpad.net/nova/+spec/rhev-m-ovirt-clusters-as-compute-resources. I am currently to integrate neutron with ovirt during a VM launch, for below use case. Use Case:- 1. Import the Neutron as external provider into oVirt. 2. VM is Launched in OpenStack - which launches VM on oVirt. Does the vm has ports configured on neutron or nova ? If so, it cannot be supported within ovirt. I'm not familiar with that driver, but if the vm should be managed by the ovirt-engine, the driver should have create vm interfaces for that vm within ovirt, and provide the network/vnic profile of the external network. If that network has a subnet (could be configured on ovirt-engine), an IP will be allocated to that port. There is no fixed IP assignment in the current ovirt-neutron integration. 3. Assign the IP assigned by the OpenStack to the oVirt VM and connect to the imported OpenStack Network. I have completed Step 1 and Step 2. Can anyone help me with possible approaches to Step 3? Thank You, Regards, Udaya Kiran ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Vdsm error
I'm noticing th following error in my vdsm.log file Thread-124060::WARNING::2014-07-15 09:07:03,329::fileSD::673::scanDomains::(collectMetaFiles) Metadata collection for domain path /rhev/data-center/mnt/172.16.10.202:_storage timedout Traceback (most recent call last): File /usr/share/vdsm/storage/fileSD.py, line 662, in collectMetaFiles sd.DOMAIN_META_DATA)) File /usr/share/vdsm/storage/remoteFileHandler.py, line 297, in callCrabRPCFunction *args, **kwargs) File /usr/share/vdsm/storage/remoteFileHandler.py, line 184, in callCrabRPCFunction rawLength = self._recvAll(LENGTH_STRUCT_LENGTH, timeout) File /usr/share/vdsm/storage/remoteFileHandler.py, line 150, in _recvAll raise Timeout() Timeout The storage domain in the error was removed a while ago. Where I can look to see where this information is still configured? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Live Storage migration doesn't work
When i try to install this packages i get $ sudo yum localinstall *.rpm Examining qemu-img-0.12.1.2-2.415.el6_5.10.x86_64.rpm: 2:qemu-img-0.12.1.2-2.415.el6_5.10.x86_64 qemu-img-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed package. Examining qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64.rpm: 2:qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64 qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed package. Examining qemu-kvm-tools-0.12.1.2-2.415.el6_5.10.x86_64.rpm: 2:qemu-kvm-tools-0.12.1.2-2.415.el6_5.10.x86_64 qemu-kvm-tools-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed package. -- André Freitas André Freitas System Network Administrator | (+351) 234 484 466 ISO 9001 CMMI Level 2 Ubiwhere Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. -Original Message- From: Maurice James mja...@media-node.com To: André Freitas afrei...@ubiwhere.com Cc: users@ovirt.org Subject: Re: [ovirt-users] Live Storage migration doesn't work Date: Tue, 15 Jul 2014 07:39:53 -0400 (EDT) If you havent already done so, replace your qemu-* packages with the ones listed at the jekins site http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/ws/rpms/ From: André Freitas afrei...@ubiwhere.com To: users@ovirt.org Sent: Tuesday, July 15, 2014 6:13:03 AM Subject: [ovirt-users] Live Storage migration doesn't work Hi, I'm trying to move a disk of a virtual machine administration (that is online) to a different nfs storage, but despite the success of the task Creating VM Snapshot Auto-generated for Live Storage Migration for VM administration in the web page of ovirt engine, it doesn't move the disk to the new storage. This is the log in engine.log http://ur1.ca/hrcvt How can i resolve this? Best regards, -- André Freitas André Freitas System Network Administrator | (+351) 234 484 466 ISO 9001 CMMI Level 2 Ubiwhere Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Live Storage migration doesn't work
you have to use the rpm command with the --force option - Original Message - From: André Freitas afrei...@ubiwhere.com To: users@ovirt.org Sent: Tuesday, July 15, 2014 9:13:41 AM Subject: Re: [ovirt-users] Live Storage migration doesn't work When i try to install this packages i get $ sudo yum localinstall *.rpm Examining qemu-img-0.12.1.2-2.415.el6_5.10.x86_64.rpm: 2:qemu-img-0.12.1.2-2.415.el6_5.10.x86_64 qemu-img-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed package. Examining qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64.rpm: 2:qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64 qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed package. Examining qemu-kvm-tools-0.12.1.2-2.415.el6_5.10.x86_64.rpm: 2:qemu-kvm-tools-0.12.1.2-2.415.el6_5.10.x86_64 qemu-kvm-tools-0.12.1.2-2.415.el6_5.10.x86_64.rpm: does not update installed package. -- André Freitas System Network Administrator | (+351) 234 484 466 Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. -Original Message- From : Maurice James mja...@media-node.com To : André Freitas afrei...@ubiwhere.com Cc : users@ovirt.org Subject : Re: [ovirt-users] Live Storage migration doesn't work Date : Tue, 15 Jul 2014 07:39:53 -0400 (EDT) If you havent already done so, replace your qemu-* packages with the ones listed at the jekins site http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/ws/rpms/ From: André Freitas afrei...@ubiwhere.com To: users@ovirt.org Sent: Tuesday, July 15, 2014 6:13:03 AM Subject: [ovirt-users] Live Storage migration doesn't work Hi, I'm trying to move a disk of a virtual machine administration (that is online) to a different nfs storage, but despite the success of the task Creating VM Snapshot Auto-generated for Live Storage Migration for VM administration in the web page of ovirt engine, it doesn't move the disk to the new storage. This is the log in engine.log http://ur1.ca/hrcvt How can i resolve this? Best regards, -- André Freitas System Network Administrator | (+351) 234 484 466 Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt-3.4.2 add host failed
Try yum downgrading 'python-pthreading'. I had similar issue yesterday and seeing others reporting the same. - Trey On Tue, Jul 15, 2014 at 2:51 AM, lofyer lof...@gmail.com wrote: I installed ovirt-3.4.2 on CentOS-6.5 from yum. While I was trying to add host, I got an error like this: Host IAM196 installation failed. Network error during communication with the host. Here's my log. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] iptables question
Yes it can be disabled, but why not just add the rules you need to make it work properly? Are you asking about iptables on the host or the guest? Are you actually using firewalld, or is it really iptables? You can add a log statement before the reject rule in /etc/sysconfig/iptables to log a message to /var/log/messages to show what is being blocked. Then you can open those ports that show up in your log as necessary. For example: http://stackoverflow.com/questions/21771684/iptables-log-and-drop-in-one-rule HTH On Tue, Jul 15, 2014 at 10:34 AM, Niklas Fondberg nik...@vireone.com wrote: Correction of my bad english... can iptables be disabled if I never plan to use NAT:d guests? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] iptables question
Thanks. It is on my centos host which is located deep in my NW. Regards, Niklas On 15 jul 2014, at 16:41, White Hat whitehat...@gmail.com wrote: Yes it can be disabled, but why not just add the rules you need to make it work properly? Are you asking about iptables on the host or the guest? Are you actually using firewalld, or is it really iptables? You can add a log statement before the reject rule in /etc/sysconfig/iptables to log a message to /var/log/messages to show what is being blocked. Then you can open those ports that show up in your log as necessary. For example: http://stackoverflow.com/questions/21771684/iptables-log-and-drop-in-one-rule HTH On Tue, Jul 15, 2014 at 10:34 AM, Niklas Fondberg nik...@vireone.com wrote: Correction of my bad english... can iptables be disabled if I never plan to use NAT:d guests? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Snapshots auto generated for live Storage
Hi, after i had successfully migrated the disks to a different nfs datastore, i now have a vm with 3 snapshots: 1 current with the description Active VM and 2 more with the description Auto-generated for Live Storage. For what i have been reading online, i can only delete snapshots with the vm offline. is this true? Second, should i commit the live storage snapshots before i delete them or its safe to delete them without commit? Best regards, -- André Freitas André Freitas System Network Administrator | (+351) 234 484 466 ISO 9001 CMMI Level 2 Ubiwhere Copyright © Ubiwhere. 2014. All rights reserved. Content for exclusive use of their rightful recipients. Dissemination, copy or use of information by third parties is prohibited. If you are not an authorised recipient and received this message, please notify the sender and then delete it without copying the text and attachments nor distributing or disclosing its contents. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] iptables question
On Tue, Jul 15, 2014 at 11:33:16AM +, Niklas Fondberg wrote: Hi all, I have a simple question, is iptables if I never plan to use NAT:d guests? Could you rephrase the question? I, for one, did not underderstand it. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] iptables question
You can modify the IPTablesConfig using engine-config utility to control what goes into host. In 3.5.0 you can use the IPTablesConfigSiteCustom in order to push some custom rules without breaking future upgrades. - Original Message - From: Niklas Fondberg nik...@vireone.com To: White Hat whitehat...@gmail.com Cc: users users@ovirt.org Sent: Tuesday, July 15, 2014 6:33:15 PM Subject: Re: [ovirt-users] iptables question Thanks. It is on my centos host which is located deep in my NW. Regards, Niklas On 15 jul 2014, at 16:41, White Hat whitehat...@gmail.com wrote: Yes it can be disabled, but why not just add the rules you need to make it work properly? Are you asking about iptables on the host or the guest? Are you actually using firewalld, or is it really iptables? You can add a log statement before the reject rule in /etc/sysconfig/iptables to log a message to /var/log/messages to show what is being blocked. Then you can open those ports that show up in your log as necessary. For example: http://stackoverflow.com/questions/21771684/iptables-log-and-drop-in-one-rule HTH On Tue, Jul 15, 2014 at 10:34 AM, Niklas Fondberg nik...@vireone.com wrote: Correction of my bad english... can iptables be disabled if I never plan to use NAT:d guests? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt-3.4.2 add host failed
I downloaded python-pthreading-0.1.3-0 and it worked. Thanks. 于 14-7-15 下午10:02, Trey Dockendorf 写道: Try yum downgrading 'python-pthreading'. I had similar issue yesterday and seeing others reporting the same. - Trey On Tue, Jul 15, 2014 at 2:51 AM, lofyer lof...@gmail.com wrote: I installed ovirt-3.4.2 on CentOS-6.5 from yum. While I was trying to add host, I got an error like this: Host IAM196 installation failed. Network error during communication with the host. Here's my log. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Vdsm error
On Tue, Jul 15, 2014 at 09:09:38AM -0400, Maurice James wrote: I'm noticing th following error in my vdsm.log file Thread-124060::WARNING::2014-07-15 09:07:03,329::fileSD::673::scanDomains::(collectMetaFiles) Metadata collection for domain path /rhev/data-center/mnt/172.16.10.202:_storage timedout Traceback (most recent call last): File /usr/share/vdsm/storage/fileSD.py, line 662, in collectMetaFiles sd.DOMAIN_META_DATA)) File /usr/share/vdsm/storage/remoteFileHandler.py, line 297, in callCrabRPCFunction *args, **kwargs) File /usr/share/vdsm/storage/remoteFileHandler.py, line 184, in callCrabRPCFunction rawLength = self._recvAll(LENGTH_STRUCT_LENGTH, timeout) File /usr/share/vdsm/storage/remoteFileHandler.py, line 150, in _recvAll raise Timeout() Timeout The storage domain in the error was removed a while ago. Where I can look to see where this information is still configured? What you see here is a failed attempt to access the long-lost storage domain. I believe that you should detach and remove it from the datacenter (unless you have already done so, and now you need to clean up some stale remains from this specific host). ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Vdsm error
On Tue, Jul 15, 2014 at 12:59:34PM -0400, Maurice James wrote: Yes, how do I clean it. That storage domain is long gone It seems that the long-gone export is still mounted on/rhev/data-center/mnt/172.16.10.202:_storage. Make sure that indeed no process is using it (lsof), and try to umount it. If all else fails, reboot. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Snapshot error
Hi all, i¹ve encountered an issue with snapshots on running VM¹s. I¹ve searched the forums but can¹t find anything that would be wrong with my setup. Environment: CentOS release 6.5 (Final Linux dl380.dmz.vireone.com 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Ovirt : 3.4.2-1 qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64 vdsm-cli-4.14.9-0.el6.noarch Log from engine log: 2014-07-15 20:46:38,197 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.GetImageInfoVDSCommand] (org.ovirt.thread.pool-6-thread-28) [5201147a] START, GetImageInfoVDSCommand( storagePoolId = deb50055-1955-4993-bfcb-a642d71e84ce, ignoreFailoverLimit = false, storageDomainId = c5ad71bf-e7a9-4ea0-b7a5-89afd5c2a61e, imageGroupId = a9210478-e9f8-4cae-a074-9cb49b1445eb, imageId = 0df50d34-157f-4272-9326-f8f8d4beab0d), log id: 74fde04 2014-07-15 20:46:38,230 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.GetImageInfoVDSCommand] (org.ovirt.thread.pool-6-thread-28) [5201147a] FINISH, GetImageInfoVDSCommand, return: org.ovirt.engine.core.common.businessentities.DiskImage@298f6049, log id: 74fde04 2014-07-15 20:46:38,245 INFO [org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand] (org.ovirt.thread.pool-6-thread-28) Lock freed to object EngineLock [exclusiveLocks= key: 6a507e40-3d0d-48cc-8507-677921f3fd04 value: VM , sharedLocks= ] 2014-07-15 20:46:38,257 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-6-thread-28) Correlation ID: 6bc2972a, Job ID: b32e4c57-6255-4398-8e58-bd5053fbec01, Call Stack: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to SnapshotVDS, error = Snapshot failed, code = 48 (Failed with error SNAPSHOT_FAILED and code 48) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:116) at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFron tendImpl.java:33) at org.ovirt.engine.core.bll.CommandBase.runVdsCommand(CommandBase.java:1981) at org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand$2.runInTransactio n(CreateAllSnapshotsFromVmCommand.java:354) at org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand$2.runInTransactio n(CreateAllSnapshotsFromVmCommand.java:351) at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppres sed(TransactionSupport.java:174) at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(T ransactionSupport.java:116) at org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand.performLiveSnapsh ot(CreateAllSnapshotsFromVmCommand.java:351) at org.ovirt.engine.core.bll.CreateAllSnapshotsFromVmCommand.endVmCommand(Crea teAllSnapshotsFromVmCommand.java:273) at org.ovirt.engine.core.bll.VmCommand.endSuccessfully(VmCommand.java:304) at org.ovirt.engine.core.bll.CommandBase.internalEndSuccessfully(CommandBase.j ava:614) at org.ovirt.engine.core.bll.CommandBase.endActionInTransactionScope(CommandBa se.java:560) at org.ovirt.engine.core.bll.CommandBase.runInTransaction(CommandBase.java:189 6) at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInNewTran saction(TransactionSupport.java:210) at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInRequire d(TransactionSupport.java:149) at org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(T ransactionSupport.java:118) at org.ovirt.engine.core.bll.CommandBase.endAction(CommandBase.java:492) at org.ovirt.engine.core.bll.Backend.endAction(Backend.java:446) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:5 7) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp l.java:43) at java.lang.reflect.Method.invoke(Method.java:606) at org.jboss.as.ee.component.ManagedReferenceMethodInterceptorFactory$ManagedR eferenceMethodInterceptor.processInvocation(ManagedReferenceMethodIntercept orFactory.java:72) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288 ) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorConte xt.java:374) at org.ovirt.engine.core.bll.interceptors.ThreadLocalSessionCleanerInterceptor .injectWebContextToThreadLocal(ThreadLocalSessionCleanerInterceptor.java:13 ) at sun.reflect.GeneratedMethodAccessor9.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp l.java:43) at java.lang.reflect.Method.invoke(Method.java:606) at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptorFactory
Re: [ovirt-users] Storage Domain used space strangeness
It might be a result of running the zfs filesystem on the disks that the storage domain is using. Any guidance is greatly appreciated. [root@jmini08 ~]# mount | grep data-pool data-pool on /data type zfs (rw,xattr) [root@jmini08 ~]# df -h /data Filesystem Size Used Avail Use% Mounted on data-pool 914G 51G 864G 6% /data [root@jmini08 ~]# du -h /data 17K /data/54ba461d-fbec-422e-9300-2f51640e5b2a/images 2.1M/data/54ba461d-fbec-422e-9300-2f51640e5b2a/dom_md 2.1M/data/54ba461d-fbec-422e-9300-2f51640e5b2a 2.2M/data [root@jmini08 ~]# zpool status pool: data-pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM data-pool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 sda ONLINE 0 0 0 sdb ONLINE 0 0 0 errors: No known data errors -- urthmover On July 15, 2014 at 12:29:12 PM, urthmover (urthmo...@gmail.com) wrote: All, I have a storage domain that reports having 863G free. The Total Space is 913G. Currently, there are no virtual machines using this storage domain. When I ssh into the host there is 2.2M on the top level of that mount according to du. How do I account for and reclaim the mysterious space usage? -- urthmover___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Storage Domain used space strangeness
All, I have a storage domain that reports having 863G free. The Total Space is 913G. Currently, there are no virtual machines using this storage domain. When I ssh into the host there is 2.2M on the top level of that mount according to du. How do I account for and reclaim the mysterious space usage? -- urthmover___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] MS Cluster Services suppot
Does oVirt/RHEV have support for Microsoft Clustering services? Can I run cluste r members across the RHEV/oVirt cluster? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Live Storage migration doesn't work
On 15-7-2014 15:19, Maurice James wrote: you have to use the rpm command with the --force option yum reinstall will also work. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Log errors help
Sorry for almost spamming the list but I sincerely have problemsŠ Could anyone help me with debugging some lines in my engine.log: Here they are: 2014-07-15 16:05:43,650 INFO [org.ovirt.engine.core.bll.storage.DeactivateStorageDomainCommand] (org.ovirt.thread.pool-6-thread-24) [797b0228] Running command: DeactivateStorageDomainCommand internal: true. Entities affected : ID: 5d6a9b56-e631-493b-8e71-569b5c8a193e Type: Storage 2014-07-15 16:05:43,657 INFO [org.ovirt.engine.core.bll.storage.DeactivateStorageDomainCommand] (org.ovirt.thread.pool-6-thread-24) [797b0228] Lock freed to object EngineLock [exclusiveLocks= key: 5d6a9b56-e631-493b-8e71-569b5c8a193e value: STORAGE , sharedLocks= ] 2014-07-15 16:05:43,685 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-6-thread-24) [797b0228] Correlation ID: 797b0228, Job ID: 82089d0c-1956-474b-8b90-d24b3998e8b0, Call Stack: null, Custom Event ID: -1, Message: Storage Domain ISO_DOMAIN (Data Center local_datacenter) was deactivated by system because it's not visible by any of the hosts. 2014-07-15 16:05:43,695 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (org.ovirt.thread.pool-6-thread-23) starting processDomainRecovery for domain 6b08bd4d-b3dc-4cf7-8d61-06dfbb129172:IMPORT_EXPORT 2014-07-15 16:05:43,698 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (org.ovirt.thread.pool-6-thread-23) Domain 6b08bd4d-b3dc-4cf7-8d61-06dfbb129172:IMPORT_EXPORT was reported by all hosts in status UP as problematic. Moving the domain to NonOperational. 2014-07-15 16:04:45,773 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand ] (DefaultQuartzScheduler_Worker-74) HostName = local_host 2014-07-15 16:04:45,773 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand ] (DefaultQuartzScheduler_Worker-74) Command HSMGetAllTasksStatusesVDSCommand(HostName = local_host, HostId = 1d734ebb-f32f-41ca-8da8-86cfae93b1e6) execution failed. Exception: IRSNonOperationalException: IRSGenericException: IRSErrorException: IRSNonOperationalException: Not SPM: () 2014-07-15 16:04:45,782 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (DefaultQuartzScheduler_Worker-74) hostFromVds::selectedVds - local_host, spmStatus Unknown_Pool, storage pool local_datacenter 2014-07-15 16:04:45,784 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand] (DefaultQuartzScheduler_Worker-74) START, ConnectStoragePoolVDSCommand(HostName = local_host, HostId = 1d734ebb-f32f-41ca-8da8-86cfae93b1e6, storagePoolId = deb50055-1955-4993-bfcb-a642d71e84ce, vds_spm_id = 1, masterDomainId = c5ad71bf-e7a9-4ea0-b7a5-89afd5c2a61e, masterVersion = 1), log id: 4556b6d3 2014-07-15 16:04:50,747 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand] (DefaultQuartzScheduler_Worker-74) Command org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand return value StatusOnlyReturnForXmlRpc [mStatus=StatusForXmlRpc [mCode=304, mMessage=Cannot find master domain: 'spUUID=deb50055-1955-4993-bfcb-a642d71e84ce, msdUUID=c5ad71bf-e7a9-4ea0-b7a5-89afd5c2a61e']] 2014-07-15 16:04:50,747 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand] (DefaultQuartzScheduler_Worker-74) HostName = local_host 2014-07-15 16:04:50,748 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand] (DefaultQuartzScheduler_Worker-74) Command ConnectStoragePoolVDSCommand(HostName = local_host, HostId = 1d734ebb-f32f-41ca-8da8-86cfae93b1e6, storagePoolId = deb50055-1955-4993-bfcb-a642d71e84ce, vds_spm_id = 1, masterDomainId = c5ad71bf-e7a9-4ea0-b7a5-89afd5c2a61e, masterVersion = 1) execution failed. Exception: IRSNoMasterDomainException: IRSGenericException: IRSErrorException: IRSNoMasterDomainException: Cannot find master domain: 'spUUID=deb50055-1955-4993-bfcb-a642d71e84ce, msdUUID=c5ad71bf-e7a9-4ea0-b7a5-89afd5c2a61e' 2014-07-15 16:04:50,749 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand] (DefaultQuartzScheduler_Worker-74) FINISH, ConnectStoragePoolVDSCommand, log id: 4556b6d3 2014-07-15 16:04:50,749 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (DefaultQuartzScheduler_Worker-74) IrsBroker::Failed::GetStoragePoolInfoVDS 2014-07-15 16:04:50,749 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (DefaultQuartzScheduler_Worker-74) Exception: IRSGenericException: IRSErrorException: IRSNoMasterDomainException: Cannot find master domain: 'spUUID=deb50055-1955-4993-bfcb-a642d71e84ce, msdUUID=c5ad71bf-e7a9-4ea0-b7a5-89afd5c2a61e' If there are any expert companies that perform professional services I would be very grateful for links. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Storage Domain used space strangeness
Den 15 jul 2014 22:28 skrev Colby Westerburg cwesterb...@gmail.com: [root@jmini08 ~]# zfs list -t snapshot no datasets available [root@jmini07 ~]# df -h FilesystemSize Used Avail Use% Mounted on 10.6.2.34:/data 914G 51G 864G 6% /rhev/data-center/mnt/10.6.2.34:_data [root@jmini08 ~]# ifconfig | grep inet addr inet addr:10.6.2.34 Bcast:10.6.15.255 Mask:255.255.240.0 -- Colby Westerburg cwesterb...@gmail.com OK, so everyone at least agrees that 50GB seems to be used. From the storage, run: # du -hs /data /K On July 15, 2014 at 2:43:57 PM, Karli Sjöberg (karli.sjob...@slu.se) wrote: Den 15 jul 2014 21:31 skrev urthmover urthmo...@gmail.com: It might be a result of running the zfs filesystem on the disks that the storage domain is using. Any guidance is greatly appreciated. Snapshots? # zfs list -t snapshot What does the hosts that are mouting think? If you log into one of them and run: # df -h /K [root@jmini08 ~]# mount | grep data-pool data-pool on /data type zfs (rw,xattr) [root@jmini08 ~]# df -h /data Filesystem Size Used Avail Use% Mounted on data-pool 914G 51G 864G 6% /data [root@jmini08 ~]# du -h /data 17K /data/54ba461d-fbec-422e-9300-2f51640e5b2a/images 2.1M /data/54ba461d-fbec-422e-9300-2f51640e5b2a/dom_md 2.1M /data/54ba461d-fbec-422e-9300-2f51640e5b2a 2.2M /data [root@jmini08 ~]# zpool status pool: data-pool state: ONLINE scan: none requested config: NAMESTATE READ WRITE CKSUM data-pool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 sda ONLINE 0 0 0 sdb ONLINE 0 0 0 errors: No known data errors -- urthmover On July 15, 2014 at 12:29:12 PM, urthmover (urthmo...@gmail.com) wrote: All, I have a storage domain that reports having 863G free. The Total Space is 913G. Currently, there are no virtual machines using this storage domain. When I ssh into the host there is 2.2M on the top level of that mount according to du. How do I account for and reclaim the mysterious space usage? -- urthmover ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Storage Domain used space strangeness
[root@jmini08 ~]# du -hs /data 3.3M/data -- urthmover On July 15, 2014 at 3:28:43 PM, Colby Westerburg (cwesterb...@gmail.com) wrote: [root@jmini08 ~]# zfs list -t snapshot no datasets available [root@jmini07 ~]# df -h Filesystem Size Used Avail Use% Mounted on 10.6.2.34:/data 914G 51G 864G 6% /rhev/data-center/mnt/10.6.2.34:_data [root@jmini08 ~]# ifconfig | grep inet addr inet addr:10.6.2.34 Bcast:10.6.15.255 Mask:255.255.240.0 -- Colby Westerburg cwesterb...@gmail.com On July 15, 2014 at 2:43:57 PM, Karli Sjöberg (karli.sjob...@slu.se) wrote: Den 15 jul 2014 21:31 skrev urthmover urthmo...@gmail.com: It might be a result of running the zfs filesystem on the disks that the storage domain is using. Any guidance is greatly appreciated. Snapshots? # zfs list -t snapshot What does the hosts that are mouting think? If you log into one of them and run: # df -h /K [root@jmini08 ~]# mount | grep data-pool data-pool on /data type zfs (rw,xattr) [root@jmini08 ~]# df -h /data Filesystem Size Used Avail Use% Mounted on data-pool 914G 51G 864G 6% /data [root@jmini08 ~]# du -h /data 17K /data/54ba461d-fbec-422e-9300-2f51640e5b2a/images 2.1M /data/54ba461d-fbec-422e-9300-2f51640e5b2a/dom_md 2.1M /data/54ba461d-fbec-422e-9300-2f51640e5b2a 2.2M /data [root@jmini08 ~]# zpool status pool: data-pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM data-pool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 sda ONLINE 0 0 0 sdb ONLINE 0 0 0 errors: No known data errors -- urthmover On July 15, 2014 at 12:29:12 PM, urthmover (urthmo...@gmail.com) wrote: All, I have a storage domain that reports having 863G free. The Total Space is 913G. Currently, there are no virtual machines using this storage domain. When I ssh into the host there is 2.2M on the top level of that mount according to du. How do I account for and reclaim the mysterious space usage? -- urthmover___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Storage Domain used space strangeness
Oddly a reboot of the host resulted in the space showing up correctly. [root@jmini08 ~]# df -h /data Filesystem Size Used Avail Use% Mounted on data-pool 914G 3.5M 914G 1% /data [root@jmini08 ~]# du -hs /data 3.3M/data -- urthmover On July 15, 2014 at 4:14:51 PM, urthmover (urthmo...@gmail.com) wrote: [root@jmini08 ~]# du -hs /data 3.3M /data -- urthmover On July 15, 2014 at 3:28:43 PM, Colby Westerburg (cwesterb...@gmail.com) wrote: [root@jmini08 ~]# zfs list -t snapshot no datasets available [root@jmini07 ~]# df -h Filesystem Size Used Avail Use% Mounted on 10.6.2.34:/data 914G 51G 864G 6% /rhev/data-center/mnt/10.6.2.34:_data [root@jmini08 ~]# ifconfig | grep inet addr inet addr:10.6.2.34 Bcast:10.6.15.255 Mask:255.255.240.0 -- Colby Westerburg cwesterb...@gmail.com On July 15, 2014 at 2:43:57 PM, Karli Sjöberg (karli.sjob...@slu.se) wrote: Den 15 jul 2014 21:31 skrev urthmover urthmo...@gmail.com: It might be a result of running the zfs filesystem on the disks that the storage domain is using. Any guidance is greatly appreciated. Snapshots? # zfs list -t snapshot What does the hosts that are mouting think? If you log into one of them and run: # df -h /K [root@jmini08 ~]# mount | grep data-pool data-pool on /data type zfs (rw,xattr) [root@jmini08 ~]# df -h /data Filesystem Size Used Avail Use% Mounted on data-pool 914G 51G 864G 6% /data [root@jmini08 ~]# du -h /data 17K /data/54ba461d-fbec-422e-9300-2f51640e5b2a/images 2.1M /data/54ba461d-fbec-422e-9300-2f51640e5b2a/dom_md 2.1M /data/54ba461d-fbec-422e-9300-2f51640e5b2a 2.2M /data [root@jmini08 ~]# zpool status pool: data-pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM data-pool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 sda ONLINE 0 0 0 sdb ONLINE 0 0 0 errors: No known data errors -- urthmover On July 15, 2014 at 12:29:12 PM, urthmover (urthmo...@gmail.com) wrote: All, I have a storage domain that reports having 863G free. The Total Space is 913G. Currently, there are no virtual machines using this storage domain. When I ssh into the host there is 2.2M on the top level of that mount according to du. How do I account for and reclaim the mysterious space usage? -- urthmover___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Guest VM Console Creation/Access using REST API and noVNC
Hi All, We are waiting for your suggestions or comments on the same. If anyone knows, please help us to sort out this issue. -- Regards Shanil On Tue, Jul 15, 2014 at 3:55 PM, Shanil S xielessha...@gmail.com wrote: Hi All, We want to access vm console by using noVNC and Rest api. We are using websocket proxy on the same machine where engine runs and we try to get the console access from the another server that is outside from this cluster. But when we try to connect the vnc_auto.html from the server using host ip, port and the password which we get from the ticket creation… it shows a Failed to connect to server (code: 1006). The following are the codes which we use to create the ticket… host,port and the password will get from the ticket and with the same details (host,port password) we are able to connect the console using the vnc clients(TigerVNC etc.) try { var host = WebUtil.getQueryVar('host', '?php echo $host?'); var port = WebUtil.getQueryVar('port', '?php echo $port?'); var path = WebUtil.getQueryVar('path', 'websockify'); var password = '?php echo $password?'; if ((!host) || (!port)) { updateState('failed', Must specify host and port in URL); return; } rfb = new RFB({'target': $D('noVNC_canvas'), 'encrypt': WebUtil.getQueryVar('encrypt', (window.location.protocol === https:)), 'true_color': WebUtil.getQueryVar('true_color', true), 'local_cursor': WebUtil.getQueryVar('cursor', true), 'shared': WebUtil.getQueryVar('shared', true), 'view_only': WebUtil.getQueryVar('view_only', false), 'updateState': updateState, 'onPasswordRequired': passwordRequired}); rfb.connect(host, port, password, path); }catch(e) {alert(e); Could you please check if there any issues with it and guide me how to get rid of this failed to connect error? I have attached the screen shots for further reference… -- Regards Shanil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users