Re: [ovirt-users] Which hardware are you using for oVirt

2018-03-31 Thread Vincent Royer
Lots of great hardware knowledge in this thread!  I'm also making the move
to 10Gb.

I'm adding a 3rd host to my deployment and moving to Glusterfs on 3 nodes,
from my current NFS share on a separate storage server.

Each of the 3 nodes has dual E5-2640 V4s with128Gb ram. I have some
hardware choices I would love some advice about:

- Should I use Intel X520-DA2 or X710-DA2 nics for the storage network?  No
significant price difference.  The hosts are running oVirt Node 4.2.  I
hope to use them in bridge mode so that I don't need a 10Gbe switch.  I do
have a single 10Gbe port left on my router.

- the hosts have 12Gbps 520i SAS cards, should I spec 6 or 12 Gbps SSD
drives? Here there is a large price difference, also large difference
between Enterprise performance, Enterprise mainstream, and Enterprise
entry.  I'm not sure how to estimate the value of those different options
in a Glusterfs deployment.

The workload is pretty I/O intensive with fairly small read/write
operations (under 128Kb) on windows VMs.

Any obvious weak links with this plan?


On Sat, Mar 31, 2018, 12:27 PM Michael Watters,  wrote:

> We run Dell Poweredge R720s and R730s with 32 GB of RAM and quad Xeon
> processors.  Storage is provided by Dell MD3800i and Promise arrays
> using iSCSI.  The network is all 10 gigabit interfaces using 802.3ad
> bonds.  We actually just upgraded from 1 gigabit NICs since there were
> some performance issues with storage causing high IOwait on VMs.  I'd
> recommend avoiding 1 gigabit if you can.
>
>
> On 3/24/18 4:33 AM, Andy Michielsen wrote:
> > Hi all,
> >
> > Not sure if this is the place to be asking this but I was wondering
> which hardware you all are using and why in order for me to see what I
> would be needing.
> >
> > I would like to set up a HA cluster consisting off 3 hosts to be able to
> run 30 vm’s.
> > The engine, I can run on an other server. The hosts can be fitted with
> the storage and share the space through glusterfs. I would think I will be
> needing at least 3 nic’s but would be able to install ovn. (Are 1gb nic’s
> sufficient ?)
> >
> > Any input you guys would like to share would be greatly appriciated.
> >
> > Thanks,
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Which hardware are you using for oVirt

2018-03-31 Thread Michael Watters
We run Dell Poweredge R720s and R730s with 32 GB of RAM and quad Xeon
processors.  Storage is provided by Dell MD3800i and Promise arrays
using iSCSI.  The network is all 10 gigabit interfaces using 802.3ad
bonds.  We actually just upgraded from 1 gigabit NICs since there were
some performance issues with storage causing high IOwait on VMs.  I'd
recommend avoiding 1 gigabit if you can.


On 3/24/18 4:33 AM, Andy Michielsen wrote:
> Hi all,
>
> Not sure if this is the place to be asking this but I was wondering which 
> hardware you all are using and why in order for me to see what I would be 
> needing.
>
> I would like to set up a HA cluster consisting off 3 hosts to be able to run 
> 30 vm’s.
> The engine, I can run on an other server. The hosts can be fitted with the 
> storage and share the space through glusterfs. I would think I will be 
> needing at least 3 nic’s but would be able to install ovn. (Are 1gb nic’s 
> sufficient ?)
>
> Any input you guys would like to share would be greatly appriciated.
>
> Thanks,
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users