[ovirt-users] Re: Help installing oVirt on single machine, without cockpit
Hi, The link you attached is for installing the engine on a stand alone machine. In case you want to have the engine and the host on the same machine you should install hosted-engine: https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_command_line/ Regards, Asaf On Wed, Dec 8, 2021 at 8:57 AM wrote: > I'm trying to install both the oVirt engine (so I have the API), and > hypervisor on the same machine. I'm hoping I don't need cockpit, and I can > write some custom scripts to manage oVirt through the API. I tried a couple > ways, and both were blocked: > > # on CentOS 9 stream, installing oVirt engine: > On a fresh CentOS install, tried following the directions [here]( > https://www.ovirt.org/documentation/installing_ovirt_as_a_standalone_manager_with_local_databases/#Installing_RHEL_for_RHVM_SM_localDB_deploy). > They failed at step 3.2, when adding the modules (missing groups or > modules). Tried skipping it, but step 3.3.2 failed when running `dnf > install ovirt-engine`, package couldn't be found. The closest package I see > is `ovirt-hosted-engine-setup-2.5.4-1.el9.noarch`. Is that what I want? > > # On oVirt node, installing engine: > Couldn't get the networking working, even though I added it during the > install process. Also tried wired connection, and no luck. Blocked early > on, but read this was SUPER minimal anyway, so maybe this wasn't the right > path. > > I'm just trying to have a working API, along side the hypervisor to run > vm's, both on the same machine. I'm down to go a third way too, if anyone > has any ideas. Thanks! > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/3L6EVRT4YBEJOIWLLXHF5QPVGJIXL7CR/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ESADJNCVTTL2F6IXJKJAREL5ROY65X2P/
[ovirt-users] Re: no QXL ?
On Wed, Dec 8, 2021 at 3:53 AM Colin Coe wrote: > For us, SPICE lets us present VMs in secure networks to unsecure > locations. RDP and VNC will not work for us. > > I didn't want to rant but why Red Hat drops useful features is beyond me. > First Satellite 5 (Spacewalk), GlusterFS, not RHV. Yep, we've been a RHV > customer since RHEV v2.2 days. SPICE was the compelling feature then and > remains so. > > My 2 cents > > On Wed, 8 Dec 2021 at 03:42, Alex McWhirter wrote: > >> It's being removed from RHEL 9, unsure of reasoning. >> >> So this mean that oVirt cannot offer SPICE/QXL on RHEL9, there is no >> spice package, qemu is compiled without SPICE/QXL support, the kernel does >> not support QXL video drivers. >> >> It's not that oVirt is killing off SPICE/QXL, but rather RHEL9 is and >> oVirt cannot support a feature not available on the host OS unless 3rd >> party packages or a SiG makes them available >> > Right The idea was to have a new cluster level on which we can provide the latest-and-greatest fixes and capabilities and so to base it on CentOS stream 9 where SPICE is not available We anyway intend to keep SPICE in oVirt 4.5 on lower cluster levels, which should work as long as the hosts are not upgraded to CentOS stream 9 > . >> >> >> On 2021-12-07 14:14, Patrick Hibbs wrote: >> >> Hello, >> >> Can I ask why this is being removed? >> >> The linked bugzilla report doesn't give a reason, and at least two others >> have expressed concerns over SPICE's deprecation. >> >> Personally, I would like to know why it's being removed entirely with no >> recourse instead of becoming an option to enable in the VM config, or an >> optional RPM that can be installed by the sysadmin. >> >> Thanks. >> >> On Tue, 2021-12-07 at 09:41 +0200, Arik Hadas wrote: >> >> >> >> On Tue, Dec 7, 2021 at 8:33 AM Patrick Hibbs >> wrote: >> >> Hello, >> >> Are we to assume that VNC mode is the only thing that will be supported >> for the VM consoles moving forward then? >> As the pure SPICE mode only works with QXL display as far as I can tell. >> >> I ask because the VNC or SPICE+VNC modes haven't worked in my environment >> for over a year now, and that change >> would effectively prevent the use of any VM console in my environment. >> (Use of VNC with remote viewer always gives >> me an authentication error.) Not that it's a normal environment, but that >> kind of thing should be advertised more. Just in case >> simillar issues exist in other deployments. >> >> >> Yes, one would need to make sure vnc/vga works well before upgrading to >> the next cluster-level (in oVirt 4.5) >> In general it is recommended to test the configuration in the new >> cluster-level by setting some representative VMs in the environment with a >> custom compatibility level and check that they work properly before >> upgrading to that cluster-level. >> >> >> >> Thanks. >> >> On Mon, 2021-12-06 at 22:03 +0200, Arik Hadas wrote: >> >> >> >> On Mon, Dec 6, 2021 at 8:45 PM lejeczek via Users >> wrote: >> >> >> >> On 06/12/2021 17:42, lejeczek via Users wrote: >> > Hi. >> > >> > I've Qemu/Libvirt from >> > >> ovirt-release-master-4.5.0-0.0.master.20211206152702.gitebb0229.el9.noarch >> > and it seems QXL is not there. >> > Is that a fluke or intention? >> > Do you have QXL working? >> > >> upss.. pardon me, these are from CentOS 9 Steam own repos >> actually. >> >> >> >> Right, and that's the reason for the ongoing work on removing qxl on >> cluster level 4.7: >> https://bugzilla.redhat.com/show_bug.cgi?id=1976607 >> >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/DZMAQQJMPHD2L4DPVHTET5N4KB4MZDUY/ >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/22NZAQL46WMEFFKQ66EKZBHGE5KCX3MY/ >> >> >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/GT5YYVAFM4P7AMCFFCJNYZO75Y6M3H4R/ >> >> >> >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: htt
[ovirt-users] Re: what is the best practices to delete vdisks in 100% used gluster stoargedoamin
Can you show the current volume info ? If it's still distributed-replicated, you need to rebalance. Best Regards,Strahil Nikolov On Thu, Dec 2, 2021 at 6:57, dhanaraj.ramesh--- via Users wrote: Hi Strahil Nikolov Thank you so much all your valuable input. Finally resolved the issue with below actions 1) shutdown all the vms running in the volume, 2) temporarily created new folders in another hdd drive ( in all three hosts) where it had enough free space 3) expanded the issue volume by adding those new folders as a new bricks ( volume changed from replicate to distributed replicate ) 4) brought up the storage domain online and moved the over utilized disks to another storage domain 5) removed the new bricks now all are back to original setup. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KWZ5MR7XX3SIASL5GZC2ZFXID5PUVPCL/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XVV2WKRV42REJDDCXGAA5AORLPX3HG2M/
[ovirt-users] Help installing oVirt on single machine, without cockpit
I'm trying to install both the oVirt engine (so I have the API), and hypervisor on the same machine. I'm hoping I don't need cockpit, and I can write some custom scripts to manage oVirt through the API. I tried a couple ways, and both were blocked: # on CentOS 9 stream, installing oVirt engine: On a fresh CentOS install, tried following the directions [here](https://www.ovirt.org/documentation/installing_ovirt_as_a_standalone_manager_with_local_databases/#Installing_RHEL_for_RHVM_SM_localDB_deploy). They failed at step 3.2, when adding the modules (missing groups or modules). Tried skipping it, but step 3.3.2 failed when running `dnf install ovirt-engine`, package couldn't be found. The closest package I see is `ovirt-hosted-engine-setup-2.5.4-1.el9.noarch`. Is that what I want? # On oVirt node, installing engine: Couldn't get the networking working, even though I added it during the install process. Also tried wired connection, and no luck. Blocked early on, but read this was SUPER minimal anyway, so maybe this wasn't the right path. I'm just trying to have a working API, along side the hypervisor to run vm's, both on the same machine. I'm down to go a third way too, if anyone has any ideas. Thanks! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3L6EVRT4YBEJOIWLLXHF5QPVGJIXL7CR/
[ovirt-users] Fresh install, dnf update dependency errors
CentOS Stream 8 fresh install. The logs show other repos, but I've tried this just installing CentOS Stream 8, updating, then installing the ovirt repo only. Then, after installing ovirt-hosted-engine-setup, dependencies become broken and dnf update produces the following error: [slacker@host1 ~]$ sudo dnf check-update Last metadata expiration check: 0:15:33 ago on Tue 07 Dec 2021 06:27:14 PM EST. epel-next-release.noarch 8-13.el8 epel epel-release.noarch8-13.el8 epel epel-release.noarch8-13.el8 ovirt-4.4-epel libzstd.x86_64 1.4.5-6.el8 ovirt-4.4-openstack-victoria ovirt-host.x86_64 4.4.9-2.el8ovirt-4.4 ovirt-host-dependencies.x86_64 4.4.9-2.el8ovirt-4.4 ovirt-release44.noarch 4.4.9.1-1.el8 ovirt-4.4 python3-pyparsing.noarch 2.4.6-1.el8 ovirt-4.4-openstack-victoria python3-pyyaml.x86_64 5.1.2-3.el8 ovirt-4.4-copr:copr.fedorainfracloud.org:sbonazzo:EL8_collection python3-six.noarch 1.15.0-2.el8 ovirt-4.4-openstack-victoria [slacker@host1 ~]$ sudo dnf update Last metadata expiration check: 0:15:56 ago on Tue 07 Dec 2021 06:27:14 PM EST. Error: Problem 1: package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-5.el8.x86_64 and rsyslog-8.2102.0-6.el8.x86_64 - package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires rsyslog-openssl, but none of the providers can be installed - cannot install the best update candidate for package rsyslog-8.2102.0-6.el8.x86_64 - cannot install the best update candidate for package ovirt-host-dependencies-4.4.8-1.el8.x86_64 Problem 2: package rsyslog-mmnormalize-8.2102.0-6.el8.x86_64 requires rsyslog = 8.2102.0-6.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-5.el8.x86_64 and rsyslog-8.2102.0-6.el8.x86_64 - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires rsyslog-openssl, but none of the providers can be installed - package ovirt-host-4.4.9-2.el8.x86_64 requires ovirt-host-dependencies = 4.4.9-2.el8, but none of the providers can be installed - cannot install the best update candidate for package rsyslog-mmnormalize-8.2102.0-6.el8.x86_64 - cannot install the best update candidate for package ovirt-host-4.4.8-1.el8.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OYXX7HOASMXFZMVICOGKSWRTRYAPEUTV/
[ovirt-users] Various issues
Fresh install on CentOS Stream 8. After installing ovirt-hosted-engine-setup, I encounter the following dependency errors when trying to run dnf upgrade: Error: Problem 1: package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - cannot install the best update candidate for package rsyslog-openssl-8.2102.0-5.el8.x86_64 - cannot install the best update candidate for package rsyslog-8.2102.0-5.el8.x86_64 Problem 2: package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires rsyslog-openssl, but none of the providers can be installed - package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - package rsyslog-elasticsearch-8.2102.0-6.el8.x86_64 requires rsyslog = 8.2102.0-6.el8, but none of the providers can be installed - cannot install the best update candidate for package rsyslog-elasticsearch-8.2102.0-5.el8.x86_64 - cannot install the best update candidate for package ovirt-host-dependencies-4.4.9-2.el8.x86_64 Problem 3: problem with installed package rsyslog-openssl-8.2102.0-5.el8.x86_64 - package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - package rsyslog-mmjsonparse-8.2102.0-6.el8.x86_64 requires rsyslog = 8.2102.0-6.el8, but none of the providers can be installed - cannot install the best update candidate for package rsyslog-mmjsonparse-8.2102.0-5.el8.x86_64 Problem 4: package ovirt-host-4.4.9-2.el8.x86_64 requires ovirt-host-dependencies = 4.4.9-2.el8, but none of the providers can be installed - package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires rsyslog-openssl, but none of the providers can be installed - package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - package rsyslog-mmnormalize-8.2102.0-6.el8.x86_64 requires rsyslog = 8.2102.0-6.el8, but none of the providers can be installed - cannot install the best update candidate for package rsyslog-mmnormalize-8.2102.0-5.el8.x86_64 - cannot install the best update candidate for package ovirt-host-4.4.9-2.el8.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) Running dnf distro-sync --nobest allows it to proceed, which causes some ovirt packages to be upgraded. Running hosted-engine --deploy and installing with nfs storage, everything goes good up until stage 5, at which point vdsm pegs a core at 100% for some minutes, until the task inevitably fails. hosted-engine --vm-status reports EngineStarting forever. No memory is consumed to indicate that the VM even started. The VM never even tries to get a DHCP lease from my router. All indicators point the vm just not starting, for some reason. Zero useful information available on Google. Zero useful information available in the documentation. Zero useful information available in the logs. No clear cause as to why the hosted engine refuses to start. The NFS share has correct permissions, and can be mounted. The NFS share is on the same host the engine is being installed to, in the same subnet/vlan and, even through the same network adapter. The shared storage works fine for copying the local hosted engine to the shared storage during the setup process and I can see the files have been created. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HLSZOUSREU3LBDXP367VA2ILFEHHICTM/
[ovirt-users] Migrated a VM from VMware to Ovirt using import ova option. Task stuck and running for day 2 now.
1. First node that was upgraded now continuously logs this error:
VDSM command Get Host Statistics failed: Internal JSON-RPC error:
{'reason': "'str' object has no attribute 'decode'"}
2. During import of two virtual machines from VMware (has done multible before
upgrade)
the import seems to never finish - currently running on day 2-3... any clues
how to fix
this?
Events VDSM command Get Host Statistics failed: Internal JSON-RPC
error:
{'reason': "'str' object has no attribute 'decode'"} running for 2 days every
20 seconds. Please suggest
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/37YK2JLWZQX6654X46UQ7QNDQYINAHFM/
[ovirt-users] Re: no QXL ?
For us, SPICE lets us present VMs in secure networks to unsecure locations. RDP and VNC will not work for us. I didn't want to rant but why Red Hat drops useful features is beyond me. First Satellite 5 (Spacewalk), GlusterFS, not RHV. Yep, we've been a RHV customer since RHEV v2.2 days. SPICE was the compelling feature then and remains so. My 2 cents On Wed, 8 Dec 2021 at 03:42, Alex McWhirter wrote: > It's being removed from RHEL 9, unsure of reasoning. > > So this mean that oVirt cannot offer SPICE/QXL on RHEL9, there is no spice > package, qemu is compiled without SPICE/QXL support, the kernel does not > support QXL video drivers. > > It's not that oVirt is killing off SPICE/QXL, but rather RHEL9 is and > oVirt cannot support a feature not available on the host OS unless 3rd > party packages or a SiG makes them available. > > > On 2021-12-07 14:14, Patrick Hibbs wrote: > > Hello, > > Can I ask why this is being removed? > > The linked bugzilla report doesn't give a reason, and at least two others > have expressed concerns over SPICE's deprecation. > > Personally, I would like to know why it's being removed entirely with no > recourse instead of becoming an option to enable in the VM config, or an > optional RPM that can be installed by the sysadmin. > > Thanks. > > On Tue, 2021-12-07 at 09:41 +0200, Arik Hadas wrote: > > > > On Tue, Dec 7, 2021 at 8:33 AM Patrick Hibbs > wrote: > > Hello, > > Are we to assume that VNC mode is the only thing that will be supported > for the VM consoles moving forward then? > As the pure SPICE mode only works with QXL display as far as I can tell. > > I ask because the VNC or SPICE+VNC modes haven't worked in my environment > for over a year now, and that change > would effectively prevent the use of any VM console in my environment. > (Use of VNC with remote viewer always gives > me an authentication error.) Not that it's a normal environment, but that > kind of thing should be advertised more. Just in case > simillar issues exist in other deployments. > > > Yes, one would need to make sure vnc/vga works well before upgrading to > the next cluster-level (in oVirt 4.5) > In general it is recommended to test the configuration in the new > cluster-level by setting some representative VMs in the environment with a > custom compatibility level and check that they work properly before > upgrading to that cluster-level. > > > > Thanks. > > On Mon, 2021-12-06 at 22:03 +0200, Arik Hadas wrote: > > > > On Mon, Dec 6, 2021 at 8:45 PM lejeczek via Users wrote: > > > > On 06/12/2021 17:42, lejeczek via Users wrote: > > Hi. > > > > I've Qemu/Libvirt from > > > ovirt-release-master-4.5.0-0.0.master.20211206152702.gitebb0229.el9.noarch > > and it seems QXL is not there. > > Is that a fluke or intention? > > Do you have QXL working? > > > upss.. pardon me, these are from CentOS 9 Steam own repos > actually. > > > > Right, and that's the reason for the ongoing work on removing qxl on > cluster level 4.7: > https://bugzilla.redhat.com/show_bug.cgi?id=1976607 > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/DZMAQQJMPHD2L4DPVHTET5N4KB4MZDUY/ > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/22NZAQL46WMEFFKQ66EKZBHGE5KCX3MY/ > > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/GT5YYVAFM4P7AMCFFCJNYZO75Y6M3H4R/ > > > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/UVPLNOGVY6DD6S7HKC5JEZ43N4NLHMRY/ > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guide
[ovirt-users] oVirt host - yum dependency error
Hi I have an existing oVirt host 4.4 running on CentOS 8, and I am in the process of converting the OS to CentOS Stream. I am getting the following errors: ``` # yum update Last metadata expiration check: 0:03:14 ago on Wed 08 Dec 2021 01:05:55 AM CET. Error: Problem 1: package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires rsyslog-openssl, but none of the providers can be installed - package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - cannot install both rsyslog-8.2102.0-5.el8.x86_64 and rsyslog-8.2102.0-6.el8.x86_64 - cannot install the best update candidate for package rsyslog-8.2102.0-5.el8.x86_64 - cannot install the best update candidate for package ovirt-host-dependencies-4.4.8-1.el8.x86_64 Problem 2: package ovirt-host-dependencies-4.4.9-2.el8.x86_64 requires rsyslog-openssl, but none of the providers can be installed - package rsyslog-openssl-8.2102.0-5.el8.x86_64 requires rsyslog = 8.2102.0-5.el8, but none of the providers can be installed - cannot install both rsyslog-8.2102.0-6.el8.x86_64 and rsyslog-8.2102.0-5.el8.x86_64 - cannot install both rsyslog-8.2102.0-5.el8.x86_64 and rsyslog-8.2102.0-6.el8.x86_64 - package rsyslog-elasticsearch-8.2102.0-6.el8.x86_64 requires rsyslog = 8.2102.0-6.el8, but none of the providers can be installed - package ovirt-host-4.4.9-2.el8.x86_64 requires ovirt-host-dependencies = 4.4.9-2.el8, but none of the providers can be installed - cannot install the best update candidate for package rsyslog-elasticsearch-8.2102.0-5.el8.x86_64 - cannot install the best update candidate for package ovirt-host-4.4.8-1.el8.x86_64 (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) ``` Does anyone know how to resolve it? Notice: The oVirt host is also a gluster storage server (hyperconverged). Thanks Toni ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CT73Y5QLQX2KVNNYVQHALLPRUHFYTREO/
[ovirt-users] Re: no QXL ?
It's being removed from RHEL 9, unsure of reasoning. So this mean that oVirt cannot offer SPICE/QXL on RHEL9, there is no spice package, qemu is compiled without SPICE/QXL support, the kernel does not support QXL video drivers. It's not that oVirt is killing off SPICE/QXL, but rather RHEL9 is and oVirt cannot support a feature not available on the host OS unless 3rd party packages or a SiG makes them available. On 2021-12-07 14:14, Patrick Hibbs wrote: Hello, Can I ask why this is being removed? The linked bugzilla report doesn't give a reason, and at least two others have expressed concerns over SPICE's deprecation. Personally, I would like to know why it's being removed entirely with no recourse instead of becoming an option to enable in the VM config, or an optional RPM that can be installed by the sysadmin. Thanks. On Tue, 2021-12-07 at 09:41 +0200, Arik Hadas wrote: On Tue, Dec 7, 2021 at 8:33 AM Patrick Hibbs wrote: Hello, Are we to assume that VNC mode is the only thing that will be supported for the VM consoles moving forward then? As the pure SPICE mode only works with QXL display as far as I can tell. I ask because the VNC or SPICE+VNC modes haven't worked in my environment for over a year now, and that change would effectively prevent the use of any VM console in my environment. (Use of VNC with remote viewer always gives me an authentication error.) Not that it's a normal environment, but that kind of thing should be advertised more. Just in case simillar issues exist in other deployments. Yes, one would need to make sure vnc/vga works well before upgrading to the next cluster-level (in oVirt 4.5) In general it is recommended to test the configuration in the new cluster-level by setting some representative VMs in the environment with a custom compatibility level and check that they work properly before upgrading to that cluster-level. Thanks. On Mon, 2021-12-06 at 22:03 +0200, Arik Hadas wrote: On Mon, Dec 6, 2021 at 8:45 PM lejeczek via Users wrote: On 06/12/2021 17:42, lejeczek via Users wrote: Hi. I've Qemu/Libvirt from ovirt-release-master-4.5.0-0.0.master.20211206152702.gitebb0229.el9.noarch and it seems QXL is not there. Is that a fluke or intention? Do you have QXL working? upss.. pardon me, these are from CentOS 9 Steam own repos actually. Right, and that's the reason for the ongoing work on removing qxl on cluster level 4.7: https://bugzilla.redhat.com/show_bug.cgi?id=1976607 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DZMAQQJMPHD2L4DPVHTET5N4KB4MZDUY/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/22NZAQL46WMEFFKQ66EKZBHGE5KCX3MY/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GT5YYVAFM4P7AMCFFCJNYZO75Y6M3H4R/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UVPLNOGVY6DD6S7HKC5JEZ43N4NLHMRY/___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GA7YUKUDR466NGHP7TMP6TFQLWFMH4WU/
[ovirt-users] Re: no QXL ?
Hello, Can I ask why this is being removed? The linked bugzilla report doesn't give a reason, and at least two others have expressed concerns over SPICE's deprecation. Personally, I would like to know why it's being removed entirely with no recourse instead of becoming an option to enable in the VM config, or an optional RPM that can be installed by the sysadmin. Thanks. On Tue, 2021-12-07 at 09:41 +0200, Arik Hadas wrote: > > > On Tue, Dec 7, 2021 at 8:33 AM Patrick Hibbs > wrote: > > Hello, > > > > Are we to assume that VNC mode is the only thing that will > > be supported for the VM consoles moving forward then? > > As the pure SPICE mode only works with QXL display as far as I can > > tell. > > > > I ask because the VNC or SPICE+VNC modes haven't worked in > > my environment for over a year now, and that change > > would effectively prevent the use of any VM console in my > > environment. (Use of VNC with remote viewer always gives > > me an authentication error.) Not that it's a normal environment, > > but that kind of thing should be advertised more. Just in case > > simillar issues exist in other deployments. > > > > > Yes, one would need to make sure vnc/vga works well before upgrading > to the next cluster-level (in oVirt 4.5) > In general it is recommended to test the configuration in the new > cluster-level by setting some representative VMs in the environment > with a custom compatibility level and check that they work properly > before upgrading to that cluster-level. > > > > > Thanks. > > > > On Mon, 2021-12-06 at 22:03 +0200, Arik Hadas wrote: > > > > > > > > > On Mon, Dec 6, 2021 at 8:45 PM lejeczek via Users > > > wrote: > > > > > > > > > > > > On 06/12/2021 17:42, lejeczek via Users wrote: > > > > > Hi. > > > > > > > > > > I've Qemu/Libvirt from > > > > > ovirt-release-master-4.5.0- > > > > 0.0.master.20211206152702.gitebb0229.el9.noarch > > > > > and it seems QXL is not there. > > > > > Is that a fluke or intention? > > > > > Do you have QXL working? > > > > > > > > > upss.. pardon me, these are from CentOS 9 Steam own repos > > > > actually. > > > > > > > > > > > > > Right, and that's the reason for the ongoing work on removing qxl > > > on cluster level 4.7: > > > https://bugzilla.redhat.com/show_bug.cgi?id=1976607 > > > > > > > ___ > > > > Users mailing list -- users@ovirt.org > > > > To unsubscribe send an email to users-le...@ovirt.org > > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > > oVirt Code of Conduct: > > > > https://www.ovirt.org/community/about/community-guidelines/ > > > > List Archives: > > > > > > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/DZMAQQJMPHD2L4DPVHTET5N4KB4MZDUY/ > > > ___ > > > Users mailing list -- users@ovirt.org > > > To unsubscribe send an email to users-le...@ovirt.org > > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > > oVirt Code of Conduct: > > > https://www.ovirt.org/community/about/community-guidelines/ > > > List Archives: > > > > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/22NZAQL46WMEFFKQ66EKZBHGE5KCX3MY/ > > > > > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ > > List Archives: > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/GT5YYVAFM4P7AMCFFCJNYZO75Y6M3H4R/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UVPLNOGVY6DD6S7HKC5JEZ43N4NLHMRY/
[ovirt-users] Re: Upgraded to oVirt 4.4.9, still have vdsmd memory leak
Once upon a time, Victor Stinner said: > Then use pickle.load() to reload snapshots from files. You can take > multiple snapshots and compare snapshot 1 with snapshot 2, compare 1 > with 3, etc. If there is a major memory increase between two > snapshots, I expect a significant difference between these two > snapshots. I tried this approach (tried Valgrind but it caused vdsmd to run too slow, so oVirt saw timeouts and moved VMs away), and it does show a pretty big jump overnight. Below is the output of a compare of tracemalloc dump between yesterday afternoon and this morning. The files in the traceback are from RPMs: python3-libvirt-7.6.0-1.el8s.x86_64 vdsm-common-4.40.90.4-1.el8.noarch Looking at the code, I'm not sure what to make of it though. Top differences /usr/lib64/python3.6/site-packages/libvirt.py:442: size=295 MiB (+285 MiB), count=5511282 (+5312311), average=56 B /usr/lib64/python3.6/json/decoder.py:355: size=73.9 MiB (+70.2 MiB), count=736108 (+697450), average=105 B /usr/lib64/python3.6/logging/__init__.py:1630: size=44.2 MiB (+43.8 MiB), count=345704 (+342481), average=134 B /usr/lib64/python3.6/site-packages/libvirt.py:5695: size=30.3 MiB (+30.0 MiB), count=190449 (+188665), average=167 B /usr/lib/python3.6/site-packages/vdsm/host/stats.py:138: size=12.1 MiB (+11.4 MiB), count=75366 (+70991), average=168 B /usr/lib/python3.6/site-packages/vdsm/utils.py:358: size=10.4 MiB (+9968 KiB), count=70204 (+65272), average=156 B /usr/lib64/python3.6/site-packages/libvirt.py:537: size=7676 KiB (+7656 KiB), count=109119 (+108886), average=72 B /usr/lib/python3.6/site-packages/yajsonrpc/betterAsyncore.py:256: size=7813 KiB (+7505 KiB), count=125015 (+120083), average=64 B /usr/lib64/python3.6/asyncore.py:173: size=6934 KiB (+6735 KiB), count=110941 (+107755), average=64 B /usr/lib/python3.6/site-packages/vdsm/virt/vmchannels.py:163: size=5984 KiB (+5631 KiB), count=95744 (+90103), average=64 B Top block 5511282 memory blocks: 302589.8 KiB File "/usr/lib64/python3.6/site-packages/libvirt.py", line 442 ret = libvirtmod.virEventRunDefaultImpl() File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 69 libvirt.virEventRunDefaultImpl() File "/usr/lib/python3.6/site-packages/vdsm/common/concurrent.py", line 260 ret = func(*args, **kwargs) File "/usr/lib64/python3.6/threading.py", line 885 self._target(*self._args, **self._kwargs) File "/usr/lib64/python3.6/threading.py", line 937 self.run() File "/usr/lib64/python3.6/threading.py", line 905 self._bootstrap_inner() -- Chris Adams ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PPMN35ROLDKDTLD43NJBDZLPH5Z64XFH/
[ovirt-users] Re: no QXL ?
On Tue, Dec 7, 2021 at 10:48 AM Rik Theys wrote: > > Hi, > > On 12/7/21 16:26, Neal Gompa wrote: > > On Tue, Dec 7, 2021 at 10:21 AM Alex McWhirter wrote: > >> Additionally, should this go forward. I would be interested in > >> maintaining a 3rd party repo with patched packages to keep SPICE/QXL > >> support if anyone else would like to join. > >> > > The Hyperscale SIG is already looking into shipping custom QEMU > > packages[1][2] to go along with the custom libvirt package[3]. You > > might want to reach out to them and collaborate there. > > > > [1]: https://pagure.io/centos-sig-hyperscale/sig/issue/67 > > [2]: https://pagure.io/centos-sig-hyperscale/sig/issue/55 > > [3]: https://pagure.io/centos-sig-hyperscale/sig/issue/16 > > > Would this also require custom oVirt packages, or will the ovirt bits to > support spice/qxl remain? > I think it'd probably be possible to ask the oVirt developers to detect when these are used and re-expose SPICE support. -- 真実はいつも一つ！/ Always, there's only one truth! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IZNODQ4OTGJLQD44JKCKJDKAMVEZOOG3/
[ovirt-users] Re: no QXL ?
Hi, On 12/7/21 16:26, Neal Gompa wrote: On Tue, Dec 7, 2021 at 10:21 AM Alex McWhirter wrote: Additionally, should this go forward. I would be interested in maintaining a 3rd party repo with patched packages to keep SPICE/QXL support if anyone else would like to join. The Hyperscale SIG is already looking into shipping custom QEMU packages[1][2] to go along with the custom libvirt package[3]. You might want to reach out to them and collaborate there. [1]: https://pagure.io/centos-sig-hyperscale/sig/issue/67 [2]: https://pagure.io/centos-sig-hyperscale/sig/issue/55 [3]: https://pagure.io/centos-sig-hyperscale/sig/issue/16 Would this also require custom oVirt packages, or will the ovirt bits to support spice/qxl remain? Regards, Rik ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LCB4I7O23BJFWWWCQ4AEHM3S4DKFJ2BS/
[ovirt-users] Re: no QXL ?
On Tue, Dec 7, 2021 at 10:21 AM Alex McWhirter wrote: > > Additionally, should this go forward. I would be interested in > maintaining a 3rd party repo with patched packages to keep SPICE/QXL > support if anyone else would like to join. > The Hyperscale SIG is already looking into shipping custom QEMU packages[1][2] to go along with the custom libvirt package[3]. You might want to reach out to them and collaborate there. [1]: https://pagure.io/centos-sig-hyperscale/sig/issue/67 [2]: https://pagure.io/centos-sig-hyperscale/sig/issue/55 [3]: https://pagure.io/centos-sig-hyperscale/sig/issue/16 -- 真実はいつも一つ！/ Always, there's only one truth! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6WUYIMEG223RI46WX5JPNJBLYAXHD2QO/
[ovirt-users] Re: no QXL ?
Additionally, should this go forward. I would be interested in maintaining a 3rd party repo with patched packages to keep SPICE/QXL support if anyone else would like to join. On 2021-12-07 10:08, Alex McWhirter wrote: I've sent my concerns to redhat, this would force us to look at other software and more than likely no longer be red hat customers. On 2021-12-07 09:15, Neal Gompa wrote: On Tue, Dec 7, 2021 at 8:49 AM Rik Theys wrote: Hi, Will SPICE be deprecated or fully removed in oVirt 4.5? Since spice is still more performant than VNC and also has more features such as USB redirection, why is it being phased out? Which connection method should we use to connect clients with a VM from a pool when USB redirection is also a requirement? There will be no way to do it. Please file bugs and support cases to Red Hat telling them these features are needed. Then maybe they'll reconsider... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/E7RPORLDTLLLSTUQDQPONFJYKA64Z6BP/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WEYNY7DKWYOFNRBT7XBRAY5EVRPUCET7/
[ovirt-users] Re: no QXL ?
I've sent my concerns to redhat, this would force us to look at other software and more than likely no longer be red hat customers. On 2021-12-07 09:15, Neal Gompa wrote: On Tue, Dec 7, 2021 at 8:49 AM Rik Theys wrote: Hi, Will SPICE be deprecated or fully removed in oVirt 4.5? Since spice is still more performant than VNC and also has more features such as USB redirection, why is it being phased out? Which connection method should we use to connect clients with a VM from a pool when USB redirection is also a requirement? There will be no way to do it. Please file bugs and support cases to Red Hat telling them these features are needed. Then maybe they'll reconsider... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/E7RPORLDTLLLSTUQDQPONFJYKA64Z6BP/
[ovirt-users] Re: no QXL ?
Agree with that, SPICE is always very nice Thanks, k Sent from my iPhone > On 7 Dec 2021, at 17:54, Rik Theys wrote: > > Will the functionality only be dropped for RHEL9/CentOS Stream 9 guests or > for all VM types? Will it only be removed in "RHV", or also in oVirt? It > would be nice to keep it in oVirt even if there's no official support for it. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RDB4NS5ZP3SPPJBISEYNQ5TOU3YG4M52/
[ovirt-users] Re: no QXL ?
On Tue, Dec 7, 2021 at 9:47 AM Rik Theys wrote: > > Hi, > > On 12/7/21 15:15, Neal Gompa wrote: > > On Tue, Dec 7, 2021 at 8:49 AM Rik Theys wrote: > >> Will SPICE be deprecated or fully removed in oVirt 4.5? > >> > >> Since spice is still more performant than VNC and also has more features > >> such as USB redirection, why is it being phased out? > >> > >> Which connection method should we use to connect clients with a VM from a > >> pool when USB redirection is also a requirement? > >> > > There will be no way to do it. Please file bugs and support cases to > > Red Hat telling them these features are needed. Then maybe they'll > > reconsider... > > Against which component should I file the bug? We're an oVirt user and > not a RHV user so we can't open support cases for this. > > Will the functionality only be dropped for RHEL9/CentOS Stream 9 guests > or for all VM types? Will it only be removed in "RHV", or also in oVirt? > It would be nice to keep it in oVirt even if there's no official support > for it. > You will want to file a bug against qemu in RHEL 9. If you're a RHEL customer, file support cases against RHEL 9.0 Beta for this. The reason oVirt dropped it is because RHEL deprecated it in 8.3: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/8.3_release_notes/rhel-8-3-0-release#BZ-1849563 It got dropped in RHEL 9.0 because this deprecation was not undone before then. -- 真実はいつも一つ！/ Always, there's only one truth! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2M65Y26D4HGD24KOTH6OFLWBDQMDHL6C/
[ovirt-users] Re: no QXL ?
Hi, On 12/7/21 15:15, Neal Gompa wrote: On Tue, Dec 7, 2021 at 8:49 AM Rik Theys wrote: Will SPICE be deprecated or fully removed in oVirt 4.5? Since spice is still more performant than VNC and also has more features such as USB redirection, why is it being phased out? Which connection method should we use to connect clients with a VM from a pool when USB redirection is also a requirement? There will be no way to do it. Please file bugs and support cases to Red Hat telling them these features are needed. Then maybe they'll reconsider... Against which component should I file the bug? We're an oVirt user and not a RHV user so we can't open support cases for this. Will the functionality only be dropped for RHEL9/CentOS Stream 9 guests or for all VM types? Will it only be removed in "RHV", or also in oVirt? It would be nice to keep it in oVirt even if there's no official support for it. Regards, Rik ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7NTNCEK464EKIDMDJSKYOET6DTYQ6EQY/
[ovirt-users] Re: no QXL ?
On Tue, Dec 7, 2021 at 8:49 AM Rik Theys wrote: > > Hi, > > Will SPICE be deprecated or fully removed in oVirt 4.5? > > Since spice is still more performant than VNC and also has more features such > as USB redirection, why is it being phased out? > > Which connection method should we use to connect clients with a VM from a > pool when USB redirection is also a requirement? > There will be no way to do it. Please file bugs and support cases to Red Hat telling them these features are needed. Then maybe they'll reconsider... -- 真実はいつも一つ！/ Always, there's only one truth! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/Y4RZP2ZNXG54XCK4FQCIJDNNP5VDDXVP/
[ovirt-users] Re: no QXL ?
Hi, Will SPICE be deprecated or fully removed in oVirt 4.5? Since spice is still more performant than VNC and also has more features such as USB redirection, why is it being phased out? Which connection method should we use to connect clients with a VM from a pool when USB redirection is also a requirement? Regards, Rik On 12/7/21 08:41, Arik Hadas wrote: On Tue, Dec 7, 2021 at 8:33 AM Patrick Hibbs wrote: Hello, Are we to assume that VNC mode is the only thing that will be supported for the VM consoles moving forward then? As the pure SPICE mode only works with QXL display as far as I can tell. I ask because the VNC or SPICE+VNC modes haven't worked in my environment for over a year now, and that change would effectively prevent the use of any VM console in my environment. (Use of VNC with remote viewer always gives me an authentication error.) Not that it's a normal environment, but that kind of thing should be advertised more. Just in case simillar issues exist in other deployments. Yes, one would need to make sure vnc/vga works well before upgrading to the next cluster-level (in oVirt 4.5) In general it is recommended to test the configuration in the new cluster-level by setting some representative VMs in the environment with a custom compatibility level and check that they work properly before upgrading to that cluster-level. Thanks. On Mon, 2021-12-06 at 22:03 +0200, Arik Hadas wrote: On Mon, Dec 6, 2021 at 8:45 PM lejeczek via Users wrote: On 06/12/2021 17:42, lejeczek via Users wrote: > Hi. > > I've Qemu/Libvirt from > ovirt-release-master-4.5.0-0.0.master.20211206152702.gitebb0229.el9.noarch > and it seems QXL is not there. > Is that a fluke or intention? > Do you have QXL working? > upss.. pardon me, these are from CentOS 9 Steam own repos actually. Right, and that's the reason for the ongoing work on removing qxl on cluster level 4.7: https://bugzilla.redhat.com/show_bug.cgi?id=1976607 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DZMAQQJMPHD2L4DPVHTET5N4KB4MZDUY/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/22NZAQL46WMEFFKQ66EKZBHGE5KCX3MY/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GT5YYVAFM4P7AMCFFCJNYZO75Y6M3H4R/ ___ Users mailing list --users@ovirt.org To unsubscribe send an email tousers-le...@ovirt.org Privacy Statement:https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/A3SCN663TVNEKPK3O2SZXJGHVVBXTQ77/ -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 <> ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JOKEPUD6XO7FGMTW6XZXGG3EF2UUOW3J/
[ovirt-users] new host addition, Cannot find master domain
hello i'm adding a new host into ovirt after the installation procces is finished I got an error: "VDSM kvm6 command ConnectStoragePoolVDS failed: Cannot find master domain". on the vdsm server in /dev/disk/by-path/ i see the block device but device-mapper not mappying it then I found the master's lun in the blacklist: /etc/multipath/conf.d/vdsm_blacklist.conf why vdsm host put the lun wwn in blacklist and what I can do ? addition info: Ovirt-engine 4.4.7 vdsm server: - OS Version: RHEL - 8.5 - 1.2111.el8 - OS Description: CentOS Linux 8 - Kernel Version: 4.18.0 - 348.2.1.el8_5.x86_64 - KVM Version: 6.0.0 - 33.el8 - LIBVIRT Version: libvirt-7.6.0-6.el8 - VDSM Version: vdsm-4.40.90.4-1.el8 the vdsm server has one link connection to the fc storage lun ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WPUKZONNIOCFVNMDEHGWUQTLGHBU2RQL/
