Re: [ovirt-users] [Users] oVirt Node Bootloader issue
Hello Fabian, I'm back with the same issue again. Have you had any luck locating the bug? On Wed, Jan 22, 2014 at 1:28 PM, Fabian Deutsch fabi...@redhat.com wrote: Am Mittwoch, den 22.01.2014, 13:23 +0500 schrieb Nauman Abbas: fc19 one, the latest Okay, could you please try this image and see if the problem still exists: http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401220717draft.vdsm,python-cpopen.el6.iso Please boot the iso with enforce=0 (append that in the bootmenu) Thanks fabian On Wed, Jan 22, 2014 at 1:08 PM, Fabian Deutsch fabi...@redhat.com wrote: Am Dienstag, den 21.01.2014, 11:33 +0500 schrieb Nauman Abbas: Hello there I'm facing this problem and this has happened to me multiple times on different machines. I have two hard drives in my system (lets say HDD A and HDD B). I boot the system from the oVirt node CD to install it. Now I want the bootloader and the node installation both to go on HDD B and not HDD A. When I get to the screen which asks me to select the hard-drive for bootloader I use the arrow keys to select HDD B and press Enter (have also tried pressing space or just use tab and continue while it's selected). Then I get to the screen asking where to install the node. I select HDD B and unselect HDD A. I keep the partitioning setup as default ( have also tried manual and kept 5GB unused on HDD A). When I get to install part. It installs the node fine on HDD B as expected but it always gets the boot-loader on HDD A. This issue has wasted many of my days on different machines and I can't seem to find a way around. Nauman, what oVirt Node version were you using? - fabian Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] NFS service not starting after reboot
Hello all Need some quick help on this. I restarted one of my oVirt nodes and it doesn't seem to go up after that. I have done some troubleshooting and found out that the nfs-server service is not going up. Here's the error. [root@ovirtnode2 /]# systemctl start nfs-server.service Job for nfs-server.service failed. See 'systemctl status nfs-server.service' and 'journalctl -xn' for details. [root@ovirtnode2 /]# systemctl status nfs-server.service nfs-server.service - NFS Server Loaded: loaded (/usr/lib/systemd/system/nfs-server.service; disabled) Active: failed (Result: exit-code) since Mon 2014-04-14 06:43:15 UTC; 18s ago Process: 2751 ExecStart=/usr/sbin/rpc.nfsd $RPCNFSDARGS $RPCNFSDCOUNT (code=exited, status=203/EXEC) Process: 2749 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=0/SUCCESS) Process: 2747 ExecStartPre=/usr/libexec/nfs-utils/scripts/nfs-server.preconfig (code=exited, status=0/SUCCESS) Apr 14 06:43:15 ovirtnode2 exportfs[2749]: exportfs: can't open /var/lib/nfs/rmtab for reading Apr 14 06:43:15 ovirtnode2 systemd[2751]: Failed at step EXEC spawning /usr/sbin/rpc.nfsd: No such file or directory Apr 14 06:43:15 ovirtnode2 systemd[1]: nfs-server.service: main process exited, code=exited, status=203/EXEC Apr 14 06:43:15 ovirtnode2 systemd[1]: Failed to start NFS Server. Apr 14 06:43:15 ovirtnode2 systemd[1]: Unit nfs-server.service entered failed state. Would be great if anyone can help sorting this out. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Adding node to local storage cluster
Hello all I wanted to ask if there's a way to add a node to a local storage cluster i-e adding one more besides the one that's already there? Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt Node Bootloader issue
fc19 one, the latest On Wed, Jan 22, 2014 at 1:08 PM, Fabian Deutsch fabi...@redhat.com wrote: Am Dienstag, den 21.01.2014, 11:33 +0500 schrieb Nauman Abbas: Hello there I'm facing this problem and this has happened to me multiple times on different machines. I have two hard drives in my system (lets say HDD A and HDD B). I boot the system from the oVirt node CD to install it. Now I want the bootloader and the node installation both to go on HDD B and not HDD A. When I get to the screen which asks me to select the hard-drive for bootloader I use the arrow keys to select HDD B and press Enter (have also tried pressing space or just use tab and continue while it's selected). Then I get to the screen asking where to install the node. I select HDD B and unselect HDD A. I keep the partitioning setup as default ( have also tried manual and kept 5GB unused on HDD A). When I get to install part. It installs the node fine on HDD B as expected but it always gets the boot-loader on HDD A. This issue has wasted many of my days on different machines and I can't seem to find a way around. Nauman, what oVirt Node version were you using? - fabian Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Node not connecting
Hello there Seem to be going in a problem again. I had installed oVirt node on my server and was running the engine on another machine. Now I had to change the engine machine since that was just a test PC so I got rid of the engine machine. Installed the engine on another machine and now i'm trying to add the node to it. It goes on all well until it reaches the 'termination' stage and then it gives an error Installation failed. Network error during communication with the host. PS SELinux/ebtables is off on both machines. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Node not connecting
I was using fc-19. The latest one on oVirt website. Can't get the logs now as my colleague removed the node to re-install it. On Mon, Jan 20, 2014 at 4:20 PM, Fabian Deutsch fabi...@redhat.com wrote: Am Montag, den 20.01.2014, 14:59 +0500 schrieb Nauman Abbas: Hello there Seem to be going in a problem again. I had installed oVirt node on my server and was running the engine on another machine. Now I had to change the engine machine since that was just a test PC so I got rid of the engine machine. Installed the engine on another machine and now i'm trying to add the node to it. It goes on all well until it reaches the 'termination' stage and then it gives an error Installation failed. Network error during communication with the host. Hey Naumann, what ovirt-node-iso version are you using? - fabian PS SELinux/ebtables is off on both machines. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt Node Bootloader issue
Hello there I'm facing this problem and this has happened to me multiple times on different machines. I have two hard drives in my system (lets say HDD A and HDD B). I boot the system from the oVirt node CD to install it. Now I want the bootloader and the node installation both to go on HDD B and not HDD A. When I get to the screen which asks me to select the hard-drive for bootloader I use the arrow keys to select HDD B and press Enter (have also tried pressing space or just use tab and continue while it's selected). Then I get to the screen asking where to install the node. I select HDD B and unselect HDD A. I keep the partitioning setup as default ( have also tried manual and kept 5GB unused on HDD A). When I get to install part. It installs the node fine on HDD B as expected but it always gets the boot-loader on HDD A. This issue has wasted many of my days on different machines and I can't seem to find a way around. Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Engine installation issue
Hello there Yes, I have just tried admin@internal and it works. Thanks Gadi. On Sat, Jan 18, 2014 at 3:36 AM, Itamar Heim ih...@redhat.com wrote: On 01/16/2014 11:45 AM, Frank Wall wrote: On Thu, Jan 16, 2014 at 12:26:37PM +0500, Nauman Abbas wrote: For some reason, the password I put during installation is not working. I've tried the following combinations No reason to use trial and error here. There's always the excellent RHEV REST API Guide to the rescue: https://access.redhat.com/site/documentation/en-US/Red_ Hat_Enterprise_Virtualization/3.0/html-single/REST_API_ Guide/index.html#sect-REST_API_Guide-Authentication-HTTP Nauman - was this resolved? -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Engine installation issue
Hello all, I can't seem to run engine setup on my machine. I get the following error. Googled around, can't find a solution [ INFO ] Creating PostgreSQL database [ INFO ] Configuring PostgreSQL [ ERROR ] Failed to execute stage 'Misc configuration': Command '/bin/systemctl' failed to execute [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20140115032633.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed It happened to me on two machines which kinda makes me think someone else also must have come across this. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Engine installation issue
Thank you very much. That worked perfectly. One more question. What's the default username and password for the engine database for accessing through REST? On Wed, Jan 15, 2014 at 3:37 PM, Alon Bar-Lev alo...@redhat.com wrote: Job for postgresql.service failed. See 'systemctl status postgresql.service' and 'journalctl -xn' for details. I guess this is related to[1]. Please try: # engine-setup --otopi-environment=OVESETUP_SYSTEM/shmmax=int:68719476736 Regards, Alon Bar-Lev. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1039616 - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Alon Bar-Lev alo...@redhat.com Cc: users@ovirt.org Sent: Wednesday, January 15, 2014 12:32:33 PM Subject: Re: [Users] Engine installation issue There you go. On Wed, Jan 15, 2014 at 2:47 PM, Alon Bar-Lev alo...@redhat.com wrote: Hi, Can you please attach[1]? Thanks! [1] /var/log/ovirt-engine/setup/ovirt-engine-setup-20140115032633.log - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: users@ovirt.org Sent: Wednesday, January 15, 2014 11:44:41 AM Subject: [Users] Engine installation issue Hello all, I can't seem to run engine setup on my machine. I get the following error. Googled around, can't find a solution [ INFO ] Creating PostgreSQL database [ INFO ] Configuring PostgreSQL [ ERROR ] Failed to execute stage 'Misc configuration': Command '/bin/systemctl' failed to execute [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20140115032633.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed It happened to me on two machines which kinda makes me think someone else also must have come across this. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Engine installation issue
For some reason, the password I put during installation is not working. I've tried the following combinations admin password-set-during-install root password-set-during-install Engine password-set-during-install ENGINE password-set-during-install engine password-set-during-install None of these work. On Thu, Jan 16, 2014 at 11:54 AM, Yedidyah Bar David d...@redhat.comwrote: That's two different questions... The engine's database, if created locally by setup, has a random password, and you can see all the credentials in /etc/ovirt-engine/engine.conf.d/10-setup-database.conf . The REST API is accessible using an engine's user/password, not the database's ones. You supplied the password for the user 'admin' during setup. -- Didi -- *From: *Nauman Abbas nauman.ab...@seecs.edu.pk *To: *Alon Bar-Lev alo...@redhat.com *Cc: *users@ovirt.org *Sent: *Thursday, January 16, 2014 8:35:47 AM *Subject: *Re: [Users] Engine installation issue Thank you very much. That worked perfectly. One more question. What's the default username and password for the engine database for accessing through REST? On Wed, Jan 15, 2014 at 3:37 PM, Alon Bar-Lev alo...@redhat.com wrote: Job for postgresql.service failed. See 'systemctl status postgresql.service' and 'journalctl -xn' for details. I guess this is related to[1]. Please try: # engine-setup --otopi-environment=OVESETUP_SYSTEM/shmmax=int:68719476736 Regards, Alon Bar-Lev. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1039616 - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Alon Bar-Lev alo...@redhat.com Cc: users@ovirt.org Sent: Wednesday, January 15, 2014 12:32:33 PM Subject: Re: [Users] Engine installation issue There you go. On Wed, Jan 15, 2014 at 2:47 PM, Alon Bar-Lev alo...@redhat.com wrote: Hi, Can you please attach[1]? Thanks! [1] /var/log/ovirt-engine/setup/ovirt-engine-setup-20140115032633.log - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: users@ovirt.org Sent: Wednesday, January 15, 2014 11:44:41 AM Subject: [Users] Engine installation issue Hello all, I can't seem to run engine setup on my machine. I get the following error. Googled around, can't find a solution [ INFO ] Creating PostgreSQL database [ INFO ] Configuring PostgreSQL [ ERROR ] Failed to execute stage 'Misc configuration': Command '/bin/systemctl' failed to execute [ INFO ] Yum Performing yum transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20140115032633.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed It happened to me on two machines which kinda makes me think someone else also must have come across this. A little help would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Didi -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt Node 3.0.3-1 for oVirt 3.3 release
No worries. I formatted my hard drive and ran the installation again and it worked. On Tue, Jan 7, 2014 at 5:50 AM, Paul Jansen vla...@yahoo.com.au wrote: Hi Nauman. I wasn't able to get back and do further debugging on this just yet. I have been hoping that Fabian will release new node isos based on EL6.5 and Fedora 20 that might mean the issue I ran into somehow went away. Unfortunately no new isos are available yet as far as I can see. I will try and go through the troubleshooting process to get the information into bugzilla in the next week or so though. On Monday, 6 January 2014 6:28 PM, Nauman Abbas nauman.ab...@seecs.edu.pk wrote: Hello there Did you find a solution to this problem you mentioned on oVirt list few days ago since I'm facing the same now. http://lists.ovirt.org/pipermail/users/2013-December/018323.html Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Deleting Storage Connection
Hello all I want to delete a storage connection since I'm adding an ISO Domain and it gives me the error Storage connection already exists.. I'm trying to go for this: http://www.ovirt.org/Features/Manage_Storage_Connections#Delete_connection_.28DELETE.29 But it just shows me some link and some script. I don't know how use it. A little guidance on it would be great. Sorry for being a noob. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt Node 3.0.3-1 for oVirt 3.3 release
Hello there Did you find a solution to this problem you mentioned on oVirt list few days ago since I'm facing the same now. http://lists.ovirt.org/pipermail/users/2013-December/018323.html Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine mbour...@redhat.comwrote: Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. -- *From: *Nauman Abbas nauman.ab...@seecs.edu.pk *To: *Meital Bourvine mbour...@redhat.com *Cc: *users@ovirt.org Users@ovirt.org *Sent: *Tuesday, December 31, 2013 9:39:09 AM *Subject: *Re: [Users] VM not starting up Sending files one by one. Vdsm.log On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine mbour...@redhat.comwrote: Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log audit.log - /var/log/audit/audit.log About the vdsm log - I don't see any error there, I think that you cut too much from it. -- *From: *Nauman Abbas nauman.ab...@seecs.edu.pk *To: *Meital Bourvine mbour...@redhat.com *Cc: *users@ovirt.org Users@ovirt.org *Sent: *Tuesday, December 31, 2013 8:42:43 AM *Subject: *Re: [Users] VM not starting up Hello Meital SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up. I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away. On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine mbour...@redhat.comwrote: Hi Nauman, Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm. Also please attach engine.log, vdsm.log, and audit.log -- *From: *Nauman Abbas nauman.ab...@seecs.edu.pk *To: *users@ovirt.org Users@ovirt.org *Sent: *Tuesday, December 31, 2013 7:13:01 AM *Subject: *[Users] VM not starting up Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error. I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM not starting up
I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. http://ur1.ca/gakhc On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz gicko...@redhat.com wrote: It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned. Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar. you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/name_of_the_vm.log - maybe that will give more information regarding the failure Gadi Ickowicz - Original Message - From: Joop jvdw...@xs4all.nl To: Nauman Abbas nauman.ab...@seecs.edu.pk Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up Nauman Abbas nauman.ab...@seecs.edu.pk wrote: I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps. On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz gicko...@redhat.com wrote: Hi, Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find ::call vmCreate with (... and either find the matching return vmCreate with or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call. Gadi Ickowicz - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine mbour...@redhat.com wrote: Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 9:39:09 AM Subject: Re: [Users] VM not starting up Sending files one by one. Vdsm.log On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine mbour...@redhat.com wrote: Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log audit.log - /var/log/audit/audit.log About the vdsm log - I don't see any error there, I think that you cut too much from it. From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up Hello Meital SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up. I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away. On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine mbour...@redhat.com wrote: Hi Nauman, Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm. Also please attach engine.log, vdsm.log, and audit.log From: Nauman Abbas nauman.ab...@seecs.edu.pk To: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error. I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas
Re: [Users] VM not starting up
Also I believe these lines right before what I pasted with Fpaste link would be relevant. Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas nauman.ab...@seecs.edu.pkwrote: I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. http://ur1.ca/gakhc On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz gicko...@redhat.comwrote: It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned. Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar. you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/name_of_the_vm.log - maybe that will give more information regarding the failure Gadi Ickowicz - Original Message - From: Joop jvdw...@xs4all.nl To: Nauman Abbas nauman.ab...@seecs.edu.pk Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up Nauman Abbas nauman.ab...@seecs.edu.pk wrote: I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps. On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz gicko...@redhat.com wrote: Hi, Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find ::call vmCreate with (... and either find the matching return vmCreate with or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call. Gadi Ickowicz - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine mbour...@redhat.com wrote: Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 9:39:09 AM Subject: Re: [Users] VM not starting up Sending files one by one. Vdsm.log On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine mbour...@redhat.com wrote: Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log audit.log - /var/log/audit/audit.log About the vdsm log - I don't see any error there, I think that you cut too much from it. From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 8:42:43 AM Subject: Re: [Users] VM not starting up Hello Meital SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up. I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away. On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine mbour...@redhat.com wrote: Hi Nauman, Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm. Also please attach engine.log, vdsm.log, and audit.log From: Nauman Abbas nauman.ab...@seecs.edu.pk To: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 7:13:01 AM Subject: [Users] VM not starting up Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start
Re: [Users] VM not starting up
Found it. http://ur1.ca/gakse Also here's the versions vdsm 4.13 sanlock 2.8 libvirt 1.1.3.1 qemu 1.6.1 On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz gicko...@redhat.com wrote: the lines you added that are right before the Fpaste link are the actual lines messages from libvirt that the vm dies. This message from libvirt is then shown later as the ERROR in vdsm in the Fpaste link. The log should contain, very close to the lines you paste, but a bit before, an xml. it should look something like what I am pasting below. Also, the line right before the xml should contain a prepareVolumePath entry: Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run) vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::?xml version=1.0 encoding=utf-8? ...the xml continues a bit with all the vm properties also - what versions of vdsm, libvirt, sanlock and qemu are you using? Gadi Ickowicz - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Gadi Ickowicz gicko...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Wednesday, January 1, 2014 7:30:24 AM Subject: Re: [Users] VM not starting up Also I believe these lines right before what I pasted with Fpaste link would be relevant. Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas nauman.ab...@seecs.edu.pk wrote: I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. http://ur1.ca/gakhc On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz gicko...@redhat.com wrote: It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned. Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar. you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/name_of_the_vm.log - maybe that will give more information regarding the failure Gadi Ickowicz - Original Message - From: Joop jvdw...@xs4all.nl To: Nauman Abbas nauman.ab...@seecs.edu.pk Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up Nauman Abbas nauman.ab...@seecs.edu.pk wrote: I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps. On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz gicko...@redhat.com wrote: Hi, Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find ::call vmCreate with (... and either find the matching return vmCreate with or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call. Gadi Ickowicz - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM not starting up Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5 hours ahead of Node clock. I've corrected that but still the same issue. On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine mbour...@redhat.com wrote: Are you sure that vdsm is running? The error happened at 2013-12-31 11:32:56,999 (engine.log) but the last line in vdsm.log is from 2013-12-31 07:20:50,807 Also make sure that your clocked are synced. From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 9:39:09 AM Subject: Re: [Users] VM not starting up Sending files one by one. Vdsm.log On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine mbour...@redhat.com wrote: Engine log can be found on the engine (while vdsm.log is on the host). The full path is - /var/log/ovirt-engine/engine.log
Re: [Users] VM not starting up
And here's the prepareVolumePath entry Thread-622::DEBUG::2013-12-31 05:06:02,576::task::974::TaskManager.Task::(_decref) Task=`8ae0743d-8e3e-4516-9d67-7713fa546759`::ref 0 aborting False Thread-622::INFO::2013-12-31 05:06:02,576::clientIF::350::vds::(prepareVolumePath) prepared volume path: /rhev/data-center/mnt/_data_images_rhev/66e0b27c-dcbb-4b6e-9a58-8213e8380c65/images/7c063b30-634a-483b-82aa-7f19d2ae46cd/b0839e46-9f79-49b2-ae34-f7cafb626c75 Thread-622::DEBUG::2013-12-31 05:06:02,589::utils::489::root::(execCmd) '/usr/libexec/vdsm/hooks/before_vm_start/50_vhostmd' (cwd None) Thread-622::DEBUG::2013-12-31 05:06:02,642::utils::509::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-622::INFO::2013-12-31 05:06:02,642::hooks::88::root::(_runHooksDir) Thread-622::DEBUG::2013-12-31 05:06:02,643::vm::2925::vm.Vm::(_run) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::?xml version=1.0... On Wed, Jan 1, 2014 at 12:12 PM, Nauman Abbas nauman.ab...@seecs.edu.pkwrote: Found it. http://ur1.ca/gakse Also here's the versions vdsm 4.13 sanlock 2.8 libvirt 1.1.3.1 qemu 1.6.1 On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz gicko...@redhat.comwrote: the lines you added that are right before the Fpaste link are the actual lines messages from libvirt that the vm dies. This message from libvirt is then shown later as the ERROR in vdsm in the Fpaste link. The log should contain, very close to the lines you paste, but a bit before, an xml. it should look something like what I am pasting below. Also, the line right before the xml should contain a prepareVolumePath entry: Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run) vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::?xml version=1.0 encoding=utf-8? ...the xml continues a bit with all the vm properties also - what versions of vdsm, libvirt, sanlock and qemu are you using? Gadi Ickowicz - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Gadi Ickowicz gicko...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Wednesday, January 1, 2014 7:30:24 AM Subject: Re: [Users] VM not starting up Also I believe these lines right before what I pasted with Fpaste link would be relevant. Thread-622::DEBUG::2013-12-31 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup handshake: Input/output error Thread-622::DEBUG::2013-12-31 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas nauman.ab...@seecs.edu.pk wrote: I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. http://ur1.ca/gakhc On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz gicko...@redhat.com wrote: It would be helpful to get a bit more information from the logs - after the vmCreate there are several other things that occur before the vm process is actually launched (prepareImage and following that the actual vm's should be visible in the log). Try to search for an error in the vdsm log, and if you cannot find one attach logs containing the vmCreate and the other operations I mentioned. Errors in the vdsm log are usually logged in lines containing ERROR, but sometimes if the error comes from libvirt it may not contain the uppercase ERROR and be logged as libvirtError or something similar. you should also have the qemu log for the vm you are trying to run. usually under /var/log/libvirt/qemu/name_of_the_vm.log - maybe that will give more information regarding the failure Gadi Ickowicz - Original Message - From: Joop jvdw...@xs4all.nl To: Nauman Abbas nauman.ab...@seecs.edu.pk Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 12:51:10 PM Subject: Re: [Users] VM not starting up Nauman Abbas nauman.ab...@seecs.edu.pk wrote: I've attached the portions with vmcreate. I found 5 instances of pairs of call vmcreate and return vmcreate. I've separated them with lines. See if that helps. On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz gicko...@redhat.com wrote: Hi, Maybe you can send just the relevant part of the vdsm logs that contain the attempt to launch the vm itself - it should start with vmCreate. Try to find ::call vmCreate with (... and either find the matching return vmCreate with or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call. Gadi Ickowicz - Original Message - From: Nauman Abbas nauman.ab...@seecs.edu.pk To: Meital Bourvine mbour...@redhat.com Cc: users@ovirt.org Users@ovirt.org Sent: Tuesday, December 31, 2013 11:47:12 AM Subject: Re: [Users] VM
[Users] VM not starting up
Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error. I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM not starting up
Hello Meital SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is showing up as okay but VM is not starting up. I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being a noob, if you can tell me the path to these files I'll send them right away. On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine mbour...@redhat.comwrote: Hi Nauman, Maybe it's a selinux issue? Please try running `setenforce 0` before starting the vm. Also please attach engine.log, vdsm.log, and audit.log -- *From: *Nauman Abbas nauman.ab...@seecs.edu.pk *To: *users@ovirt.org Users@ovirt.org *Sent: *Tuesday, December 31, 2013 7:13:01 AM *Subject: *[Users] VM not starting up Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error. I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 Thread-91::DEBUG::2013-12-30 11:20:06,851::fileSD::239::Storage.Misc.excCmd::(getReadDelay) '/usr/bin/dd iflag=direct if=/rhev/data-center/mnt/_data_images_rhev/66e0b27c-dcbb-4b6e-9a58-8213e8380c65/dom_md/metadata bs=4096 count=1' (cwd None) Thread-91::DEBUG::2013-12-30 11:20:07,102::fileSD::239::Storage.Misc.excCmd::(getReadDelay) SUCCESS: err = '0+1 records in\n0+1 records out\n502 bytes (502 B) copied, 0.0171847 s, 29.2 kB/s\n'; rc = 0 Thread-1826::DEBUG::2013-12-30 11:20:08,983::BindingXMLRPC::177::vds::(wrapper) client [10.3.72.248] Thread-1826::DEBUG::2013-12-30 11:20:08,983::task::579::TaskManager.Task::(_updateState) Task=`a3cc3899-001a-46b9-b836-ac51ca61f304`::moving from state init - state preparing Thread-1826::INFO::2013-12-30 11:20:08,987::logUtils::44::dispatcher::(wrapper) Run and protect: getSpmStatus(spUUID='b709443b-9933-46aa-86cd-c687bb8953f8', options=None) Thread-1826::INFO::2013-12-30 11:20:08,991::logUtils::47::dispatcher::(wrapper) Run and protect: getSpmStatus, Return response: {'spm_st': {'spmId': 1, 'spmStatus': 'SPM', 'spmLver': 3}} Thread-1826::DEBUG::2013-12-30 11:20:08,992::task::1168::TaskManager.Task::(prepare) Task=`a3cc3899-001a-46b9-b836-ac51ca61f304`::finished: {'spm_st': {'spmId': 1, 'spmStatus': 'SPM', 'spmLver': 3}} Thread-1826::DEBUG::2013-12-30 11:20:08,992::task::579::TaskManager.Task::(_updateState) Task=`a3cc3899-001a-46b9-b836-ac51ca61f304`::moving from state preparing - state finished Thread-1826::DEBUG::2013-12-30 11:20:08,995::resourceManager::939::ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources {} Thread-1826::DEBUG::2013-12-30 11:20:08,995::resourceManager::976::ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {} Thread-1826::DEBUG::2013-12-30 11:20:09,000::task::974::TaskManager.Task::(_decref) Task=`a3cc3899-001a-46b9-b836-ac51ca61f304`::ref 0 aborting False Thread-1827::DEBUG::2013-12-30 11:20:09,162::BindingXMLRPC::177::vds::(wrapper) client [10.3.72.248] Thread-1827::DEBUG::2013-12-30 11:20:09,165::task::579::TaskManager.Task::(_updateState) Task=`e132331d-813e-4f27-a952-e104077eb354`::moving from state init - state preparing Thread-1827::INFO::2013-12-30 11:20:09,169::logUtils::44::dispatcher::(wrapper) Run and protect: getStoragePoolInfo(spUUID='b709443b-9933-46aa-86cd-c687bb8953f8', options=None) Thread-1827::DEBUG::2013-12-30 11:20:09,170::resourceManager::197::ResourceManager.Request::(__init__) ResName=`Storage.b709443b-9933-46aa-86cd-c687bb8953f8`ReqID=`83675d9e-fa54-4e99-a942-9106702338cd`::Request was made in '/usr/share/vdsm/storage/hsm.py' line '2547' at 'getStoragePoolInfo' Thread-1827::DEBUG::2013-12-30 11:20:09,171::resourceManager::541::ResourceManager::(registerResource) Trying to register resource 'Storage.b709443b-9933-46aa-86cd-c687bb8953f8' for lock type 'shared' Thread-1827::DEBUG::2013-12-30 11:20:09,174::resourceManager::600::ResourceManager::(registerResource) Resource 'Storage.b709443b-9933-46aa-86cd-c687bb8953f8' is free. Now locking as 'shared' (1 active user) Thread-1827::DEBUG::2013-12-30 11:20:09,174::resourceManager::237::ResourceManager.Request::(grant) ResName=`Storage.b709443b-9933-46aa-86cd-c687bb8953f8`ReqID=`83675d9e-fa54-4e99-a942-9106702338cd`::Granted request Thread-1827::DEBUG::2013-12-30 11:20:09,179::task::811::TaskManager.Task::(resourceAcquired) Task
Re: [Users] Cannot configure storage
Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes [root@usbnode1 ~]# blockdev --report RORA SSZ BSZ StartSecSize Device rw 1024 512 4096 01600 /dev/sda rw 1024 512 512 2048159998934528 /dev/sda1 rw 1024 512 1024 34 1031168 /dev/sda2 rw 256 512 4096 01600 /dev/dm-0 rw 256 512 512 0159998934528 /dev/dm-1 rw 256 512 1024 0 1031168 /dev/dm-2 rw 256 512 4096 0 7803174912 /dev/sdb rw 256 512 4096 2048 254803968 /dev/sdb1 rw 256 512 4096 499712 511705088 /dev/sdb2 rw 256 512 40961499136 512753664 /dev/sdb3 rw 256 512 40962500608 6522142720 /dev/sdb4 rw 256 512 4096 0 7803174912 /dev/dm-3 rw 256 512 4096 0 254803968 /dev/dm-4 rw 256 512 4096 0 511705088 /dev/dm-5 rw 256 512 1024 0 512753664 /dev/dm-6 rw 256 512 4096 0 6522142720 /dev/dm-7 rw 256 512 4096 0 1610612736 /dev/dm-8 rw 256 512 4096 0 3095396352 /dev/dm-9 rw 256 512 1024 0 8388608 /dev/dm-10 rw 256 512 4096 0 2147483648 /dev/dm-11 rw 256 512 4096 0 1266679808 /dev/dm-12 On Mon, Dec 23, 2013 at 1:43 PM, Sander Grendelman san...@grendelman.comwrote: On Mon, Dec 23, 2013 at 8:23 AM, Nauman Abbas nauman.ab...@seecs.edu.pk wrote: Hello all I'm booting oVirt node from USB and want to use my hard drive for storing VMs and stuff. When I have booted the node from USB I try to mount the hard drive into a folder in the file-system but I am getting the following error. mount: /dev/sda1 is already mounted or /mnt busy Anyone who knows about this error? Could it be that /dev/sda is your USB drive? What is the output of fdisk -l blockdev --report ? -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Cannot configure storage
Hello all I'm booting oVirt node from USB and want to use my hard drive for storing VMs and stuff. When I have booted the node from USB I try to mount the hard drive into a folder in the file-system but I am getting the following error. mount: /dev/sda1 is already mounted or /mnt busy Anyone who knows about this error? Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] NFS Server problem on oVirt node
I've tried looking up what's wrong but can't figure out really. And yes I understand that I have to create it through the engine. The question was about where it would be i-e the path. Hope you get what I mean now. :) On Tue, Dec 10, 2013 at 5:09 PM, Fabian Deutsch fabi...@redhat.com wrote: Am Dienstag, den 10.12.2013, 16:15 +0500 schrieb Nauman Abbas: Hello all Can I create the storage domain on the node? Or does it have to be on the engine machine or somewhere else. I'm trying to create it on the node since I don't want all that space to go waste and since I'm only doing testing right now but I'm having NFS issues. Hey Nauman, basically storage domains can only be configured through oVirt Engine. But the errors below look a bit suspicious. What ovirt-node version are you using? And can you find out why those services fail to start? - fabian [root@host1 ~]# systemctl start nfs-server.service A dependency job for nfs-server.service failed. See 'journalctl -xn' for details . [root@host1 ~]# journalctl -xn -- Logs begin at Fri 2013-12-06 06:46:18 UTC, end at Tue 2013-12-10 09:55:33 UTC Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Remote Quota S -- Subject: Unit nfs-rquotad.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../Soft.../systemd/catalog/be02c -- -- Unit nfs-rquotad.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Mount Daemon. -- Subject: Unit nfs-mountd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../Soft.../systemd/catalog/be02c -- -- Unit nfs-mountd.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFSv4 ID-name mapp -- Subject: Unit nfs-idmap.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel lines 1-23...skipping... -- Logs begin at Fri 2013-12-06 06:46:18 UTC, end at Tue 2013-12-10 09:55:33 UTC. -- Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Remote Quota Server. -- Subject: Unit nfs-rquotad.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation:http://www.freedesktop.org/.../be02cf6855d2428ba40df7e9d0. .. -- -- Unit nfs-rquotad.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Mount Daemon. -- Subject: Unit nfs-mountd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation:http://www.freedesktop.org/.../be02cf6855d2428ba40df7e9d0. .. -- -- Unit nfs-mountd.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFSv4 ID-name mapping daemon. -- Subject: Unit nfs-idmap.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation:http://www.freedesktop.org/.../be02cf6855d2428ba40df7e9d0. .. -- -- Unit nfs-idmap.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Unit proc-fs-nfsd.mount entered failed state. Dec 10 09:55:33 host1.local systemd[1]: nfs-server.service: main process exited, code=exited, status=203/EXEC Dec 10 09:55:33 host1.local systemd[1]: Unit nfs-server.service entered failed state. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] NFS Server problem on oVirt node
Hello all Can I create the storage domain on the node? Or does it have to be on the engine machine or somewhere else. I'm trying to create it on the node since I don't want all that space to go waste and since I'm only doing testing right now but I'm having NFS issues. [root@host1 ~]# systemctl start nfs-server.service A dependency job for nfs-server.service failed. See 'journalctl -xn' for details . [root@host1 ~]# journalctl -xn -- Logs begin at Fri 2013-12-06 06:46:18 UTC, end at Tue 2013-12-10 09:55:33 UTC Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Remote Quota S -- Subject: Unit nfs-rquotad.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../Soft.../systemd/catalog/be02chttp://www.freedesktop.org/wiki/Software/systemd/catalog/be02c -- -- Unit nfs-rquotad.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Mount Daemon. -- Subject: Unit nfs-mountd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../Soft.../systemd/catalog/be02chttp://www.freedesktop.org/wiki/Software/systemd/catalog/be02c -- -- Unit nfs-mountd.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFSv4 ID-name mapp -- Subject: Unit nfs-idmap.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel lines 1-23...skipping... -- Logs begin at Fri 2013-12-06 06:46:18 UTC, end at Tue 2013-12-10 09:55:33 UTC. -- Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Remote Quota Server. -- Subject: Unit nfs-rquotad.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../be02cf6855d2428ba40df7e9d0...http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d -- -- Unit nfs-rquotad.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFS Mount Daemon. -- Subject: Unit nfs-mountd.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../be02cf6855d2428ba40df7e9d0...http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d -- -- Unit nfs-mountd.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Dependency failed for NFSv4 ID-name mapping daemon. -- Subject: Unit nfs-idmap.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/.../be02cf6855d2428ba40df7e9d0...http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d -- -- Unit nfs-idmap.service has failed. -- -- The result is dependency. Dec 10 09:55:33 host1.local systemd[1]: Unit proc-fs-nfsd.mount entered failed state. Dec 10 09:55:33 host1.local systemd[1]: nfs-server.service: main process exited, code=exited, status=203/EXEC Dec 10 09:55:33 host1.local systemd[1]: Unit nfs-server.service entered failed state. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences Technology, + 92 321 5359946 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users