[Users] Migration of engine
Hi We use 3.1 on centos 6 and have the need to migrate the engine due to hardware issues. Looking at http://wiki.ovirt.org/Backup_engine_db Are there any other files apart from the db that might be needed or once the db is migrated into a freshly installed engine with the same IP and hostname as the original all will be well? many thanks___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] AD authentication for ovirt manager
> Hello Jonathan, > > I believe you can use the Red Hat Documentation for this. > > https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.1/html/Evaluation_Guide/Evaluation_Guide-VDI.html#Evaluation_Guide-Add_Active_Directory > > One of the "gotchas" that I ran into is that you need to specify the Active > Directory as your DNS provider in your resolv.conf file (not sure if it was > coincidence or not; but I ran into some issues that went away when I did this) Has anyone had success doing this with 389 ? cheers ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] rebooting physical network that ovirt is attached to
>> >> >> I believe this also answers my other thread, that is is ok to reboot the >> management server at any time? (I have another thread about how sluggish >> mine is running lately, and id like to get it rebooted soon before I go >> on vacation). >> dont reboot the whole server - just restart the jboss cheers ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] DL380 G5 - Fails to Activate
> >> >> I have a couple of old DL380 G5's and i am putting them into their own >> cluster for testing various things out. >> The install of 3.1 from dreyou goes fine onto them but when they try to >> activate i get the following >> >> Host xxx.xxx.net.uk moved to Non-Operational state as host does not meet the >> cluster's minimum CPU level. Missing CPU features : model_Conroe, nx >> >> KVM appears to run just fine on these host and their cpu's are >> >> Intel(R) Xeon(R) CPU5140 @ 2.33GHz >> >> Is it possible to add these in to a 3.1 cluster ?? >> >> >> and now i have managed to find a similar post >> >> # vdsClient -s 0 getVdsCaps | grep -i flags >> cpuFlags = >> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,lahf_lm,dts,tpr_shadow >> >> # virsh -r capabilities >> >> >> >>134bd567-da9f-43f9-8a2b-c259ed34f938 >> >> x86_64 >> kvm32 >> Intel >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>tcp >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>hvm >> >> 32 >> /usr/libexec/qemu-kvm >> rhel6.3.0 >> pc >> rhel6.2.0 >> rhel6.1.0 >> rhel6.0.0 >> rhel5.5.0 >> rhel5.4.4 >> rhel5.4.0 >> >> >> >>/usr/libexec/qemu-kvm >> >> >> >> >> >> >> >> >> >> >> >> >> >>hvm >> >> 64 >> /usr/libexec/qemu-kvm >> rhel6.3.0 >> pc >> rhel6.2.0 >> rhel6.1.0 >> rhel6.0.0 >> rhel5.5.0 >> rhel5.4.4 >> rhel5.4.0 >> >> >> >>/usr/libexec/qemu-kvm >> >> >> >> >> >> >> >> >> >> >> >> >> >> Hi - any clues here or am i out of luck with these hosts? >> >> thanks >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > Hi, > how about the kvm-ok tool result? Is it responding: > > INFO: /dev/kvm exists > KVM acceleration can be used for posterity - http://www.linkedin.com/groups/Rhev-3-Beta-Proliant-DL380-2536011.S.93285316 This solved it for me - cheers ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] DL380 G5 - Fails to Activate
>> > > Hi, > how about the kvm-ok tool result? Is it responding: > > INFO: /dev/kvm exists > KVM acceleration can be used > > Alex thanks - but for the life of me i cant seem to find that on my filesystem nor is google telling me what package in CentOS 6 that comes from - Do you have any idea? thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] DL380 G5 - Fails to Activate
>> I have a couple of old DL380 G5's and i am putting them into their own >> cluster for testing various things out. >> The install of 3.1 from dreyou goes fine onto them but when they try to >> activate i get the following >> >> Host xxx.xxx.net.uk moved to Non-Operational state as host does not meet the >> cluster's minimum CPU level. Missing CPU features : model_Conroe, nx >> >> KVM appears to run just fine on these host and their cpu's are >> >> Intel(R) Xeon(R) CPU5140 @ 2.33GHz >> >> Is it possible to add these in to a 3.1 cluster ?? > > and now i have managed to find a similar post > > # vdsClient -s 0 getVdsCaps | grep -i flags > cpuFlags = > fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,lahf_lm,dts,tpr_shadow > > # virsh -r capabilities > > > > 134bd567-da9f-43f9-8a2b-c259ed34f938 > > x86_64 > kvm32 > Intel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > tcp > > > > > > > > > > > > > > > > hvm > > 32 > /usr/libexec/qemu-kvm > rhel6.3.0 > pc > rhel6.2.0 > rhel6.1.0 > rhel6.0.0 > rhel5.5.0 > rhel5.4.4 > rhel5.4.0 > > > > /usr/libexec/qemu-kvm > > > > > > > > > > > > > > hvm > > 64 > /usr/libexec/qemu-kvm > rhel6.3.0 > pc > rhel6.2.0 > rhel6.1.0 > rhel6.0.0 > rhel5.5.0 > rhel5.4.4 > rhel5.4.0 > > > > /usr/libexec/qemu-kvm > > > > > > > > > > > Hi - any clues here or am i out of luck with these hosts? thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] DL380 G5 - Fails to Activate
> > > > I have a couple of old DL380 G5's and i am putting them into their own > cluster for testing various things out. > The install of 3.1 from dreyou goes fine onto them but when they try to > activate i get the following > > Host xxx.xxx.net.uk moved to Non-Operational state as host does not meet the > cluster's minimum CPU level. Missing CPU features : model_Conroe, nx > > KVM appears to run just fine on these host and their cpu's are > > Intel(R) Xeon(R) CPU5140 @ 2.33GHz > > Is it possible to add these in to a 3.1 cluster ?? and now i have managed to find a similar post # vdsClient -s 0 getVdsCaps | grep -i flags cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,lahf_lm,dts,tpr_shadow # virsh -r capabilities 134bd567-da9f-43f9-8a2b-c259ed34f938 x86_64 kvm32 Intel tcp hvm 32 /usr/libexec/qemu-kvm rhel6.3.0 pc rhel6.2.0 rhel6.1.0 rhel6.0.0 rhel5.5.0 rhel5.4.4 rhel5.4.0 /usr/libexec/qemu-kvm hvm 64 /usr/libexec/qemu-kvm rhel6.3.0 pc rhel6.2.0 rhel6.1.0 rhel6.0.0 rhel5.5.0 rhel5.4.4 rhel5.4.0 /usr/libexec/qemu-kvm ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] DL380 G5 - Fails to Activate
Hi I have a couple of old DL380 G5's and i am putting them into their own cluster for testing various things out. The install of 3.1 from dreyou goes fine onto them but when they try to activate i get the following Host xxx.xxx.net.uk moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_Conroe, nx KVM appears to run just fine on these host and their cpu's are Intel(R) Xeon(R) CPU5140 @ 2.33GHz Is it possible to add these in to a 3.1 cluster ?? thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] KVM version not showing in Ovirt Manager
> > so…I guess - either do not build it with -rhev(regular upstream/fedora > packages are without the suffix) or build vdsm with the corresponding > modification in caps.py > > yes - i am not sure why those packages are in dreyou's repo, they weren't there a couple of weeks ago when the last HV was built as that one just pulled the stock CentOS ones. I may just leave it and wait until 3.2 comes along with official RHEL/CentOS packages thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] KVM version not showing in Ovirt Manager
> Tom, > you should have qemu-kvm on Fedora, CentOS and such > qemu-kvm-rhev on RHEL hosts are supposed to work with downstream RHEV > product. How did you get them there? > You can modify that if you want in vdsm/caps.py in _getKeyPackages() function http://www.dreyou.org/ovirt/vdsm/Packages/ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] KVM version not showing in Ovirt Manager
I mentioned these in the first post but they are CentOS 6.3's running on dreyou's packages - the KVM packages are different between the nodes as indicated below working node002 ~]# rpm -qa | grep kvm qemu-kvm-tools-0.12.1.2-2.295.el6_3.8.x86_64 qemu-kvm-0.12.1.2-2.295.el6_3.8.x86_64 non working node003 ~]# rpm -qa | grep kvm qemu-kvm-rhev-0.12.1.2-2.295.el6.10.x86_64 qemu-kvm-rhev-tools-0.12.1.2-2.295.el6.10.x86_64 cheers > Hi, > so what is the OS on each server and what package is actually installed there? > ie. the rpm name > > Thanks, > michal > > On Jan 22, 2013, at 18:55 , Tom Brown wrote: > >> >> >> >>> I think that it's a typo and the right command is: vdsClient . >>> The second command doesn't have the typo :). >>> >> >> Working node >> >> node002 ~]# vdsClient -s 0 getVdsCaps && vdsClient -s 0 getVdsStats > >> /tmp/node002.log >> HBAInventory = {'iSCSI': [{'InitiatorName': >> 'iqn.1994-05.com.redhat:31b77320b5e6'}], 'FC': []} >> ISCSIInitiatorName = iqn.1994-05.com.redhat:31b77320b5e6 >> bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': >> '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', >> 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': >> '00:00:00:00:00:00'}} >> bridges = {'ovirtmgmt': {'addr': '10.192.42.196', 'cfg': {'DELAY': '0', >> 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': >> 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', >> 'stp': 'off', 'ports': ['vnet0', 'vnet1', 'eth0', 'vnet2']}} >> clusterLevels = ['3.0', '3.1', '3.2'] >> cpuCores = 4 >> cpuFlags = >> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_Penryn >> cpuModel = Intel(R) Xeon(R) CPU W3520 @ 2.67GHz >> cpuSockets = 1 >> cpuSpeed = 2666.908 >> emulatedMachines = ['rhel6.3.0', 'pc', 'rhel6.2.0', 'rhel6.1.0', >> 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] >> guestOverhead = 65 >> hooks = {} >> kvmEnabled = true >> lastClient = 10.192.42.207 >> lastClientIface = ovirtmgmt >> management_ip = >> memSize = 7853 >> netConfigDirty = False >> networks = {'ovirtmgmt': {'iface': 'ovirtmgmt', 'addr': >> '10.192.42.196', 'cfg': {'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': >> 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': >> '1500', 'netmask': '255.255.255.0', 'stp': 'off', 'bridged': True, >> 'gateway': '10.192.42.1', 'ports': ['vnet0', 'vnet1', 'eth0', 'vnet2']}} >> nics = {'eth0': {'addr': '', 'cfg': {'DEVICE': 'eth0', 'BRIDGE': >> 'ovirtmgmt', 'BOOTPROTO': 'dhcp', 'TYPE': 'Ethernet', 'ONBOOT': 'yes'}, >> 'mtu': '1500', 'netmask': '', 'hwaddr': 'd4:85:64:09:34:08', 'speed': 1000}} >> operatingSystem = {'release': '3.el6.centos.9', 'version': '6', 'name': >> 'RHEL'} >> packages2 = {'kernel': {'release': '279.14.1.el6.x86_64', 'buildtime': >> 1352245389.0, 'version':
Re: [Users] Adding additional network(s)
> > You should add another network fior this to the DC & attach it to the > cluster(s) where the VMs needing it are defined. > At this point you should be able to create virtual NICs in the VMs that use > this network. > Then you should set it up on the hosts that have this NIC. > > If not all hosts in the cluster have this connection then you should attach > the network as not required. > thanks - i shall try this shortly and report back cheers ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Adding additional network(s)
Hi I am setting up another DC, that is managed by my sole management node, and this DC will have a requirement that the VM's will need an additional storage NIC. This NIC is for NFS/CIFS traffic and is independent of the oVirt VM's disks. I have cabled the additional physical NIC in the HV's as this network is non routed storage, and I where to go from here. Whats the next step needed to add the NIC to the DC and then i presume adding the NIC to the VM's is straight forward. thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] KVM version not showing in Ovirt Manager
> I think that it's a typo and the right command is: vdsClient . > The second command doesn't have the typo :). > Working node node002 ~]# vdsClient -s 0 getVdsCaps && vdsClient -s 0 getVdsStats > /tmp/node002.log HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:31b77320b5e6'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:31b77320b5e6 bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}} bridges = {'ovirtmgmt': {'addr': '10.192.42.196', 'cfg': {'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', 'stp': 'off', 'ports': ['vnet0', 'vnet1', 'eth0', 'vnet2']}} clusterLevels = ['3.0', '3.1', '3.2'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_Penryn cpuModel = Intel(R) Xeon(R) CPU W3520 @ 2.67GHz cpuSockets = 1 cpuSpeed = 2666.908 emulatedMachines = ['rhel6.3.0', 'pc', 'rhel6.2.0', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] guestOverhead = 65 hooks = {} kvmEnabled = true lastClient = 10.192.42.207 lastClientIface = ovirtmgmt management_ip = memSize = 7853 netConfigDirty = False networks = {'ovirtmgmt': {'iface': 'ovirtmgmt', 'addr': '10.192.42.196', 'cfg': {'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', 'stp': 'off', 'bridged': True, 'gateway': '10.192.42.1', 'ports': ['vnet0', 'vnet1', 'eth0', 'vnet2']}} nics = {'eth0': {'addr': '', 'cfg': {'DEVICE': 'eth0', 'BRIDGE': 'ovirtmgmt', 'BOOTPROTO': 'dhcp', 'TYPE': 'Ethernet', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '', 'hwaddr': 'd4:85:64:09:34:08', 'speed': 1000}} operatingSystem = {'release': '3.el6.centos.9', 'version': '6', 'name': 'RHEL'} packages2 = {'kernel': {'release': '279.14.1.el6.x86_64', 'buildtime': 1352245389.0, 'version': '2.6.32'}, 'spice-server': {'release': '10.el6', 'buildtime': 1340375889, 'version': '0.10.1'}, 'vdsm': {'release': '0.77.20.el6', 'buildtime': 1351246440, 'version': '4.10.1'}, 'qemu-kvm': {'release': '2.295.el6_3.8', 'buildtime': 1354636067, 'version': '0.12.1.2'}, 'libvirt': {'release': '21.el6_3.6', 'buildtime': 1353577785, 'version': '0.9.10'}, 'qemu-img': {'release': '2.295.el6_3.8', 'buildtime': 1354636067, 'version': '0.12.1.2'}} reservedMem = 321 software_revision = 0.77 software_version = 4.10 supportedENGINEs = ['3.0', '3.1'] supportedProtocols = ['2.2', '2.3'] uuid = 55414E03-C241-11DF-BBDA-64093408D485_d4:85:64:09:34:08 version_name = Snow Man vlans = {} vmTypes = ['kvm'] Non Working node node003 ~]# vdsClient -s 0 getVdsCaps && vdsClient -s 0 getVdsStats HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:9a7b944e2160'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:9a7b944e2160 bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}} bridges = {'ovirtmgmt': {'addr': '10.192.42.144', 'cfg': {'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', 'stp': 'off', 'ports': ['vnet1', 'eth0', 'vnet0']}} clusterLevels = ['3.0', '3.1', '3.2'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_Penryn cpuModel = Intel(R) Xeon(R) CPU W3520 @ 2.67GHz cpuSockets = 1 cpuSpeed = 2666.752 emulatedMachines = ['rhel6.3.0', 'pc', 'rhel6.2.0', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'r
Re: [Users] KVM version not showing in Ovirt Manager
> please issue the following commands on both hv's: > > vdsClinet -s 0 getVdsCaps && vdsClient -s 0 getVdsStats > > I would like to make sure vdsm is indeed report them to the engine. > i appear to not have that command in my PATH on either node - Which package provides it? node002 ~]# yum whatprovides */vdsClinet Loaded plugins: fastestmirror, priorities, rhnplugin, security This system is receiving updates from RHN Classic or RHN Satellite. Loading mirror speeds from cached hostfile * epel: mirrors.coreix.net centos-6-x86_64-01012013/filelists | 11 MB 00:00 epel/filelists_db | 6.9 MB 00:01 spacewalk-client/filelists | 5.7 kB 00:00 vdsm/filelists | 9.8 kB 00:00 No Matches found ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] KVM version not showing in Ovirt Manager
Hi I have just added another HV to a cluster and its up and running fine. I can run VM's on it and migrate fro other HV's onto it. I do note however that in the manager there is no KVM version listed as installed however on other HV's in the cluster there is a version present. I see that the KVM version is slightly different on this new host but as i said apart from this visual issue everything appear to be running fine. These HV's are CentOS 6.3 using dreyou 3.1 Node where KVM version not showing in the manager node003 ~]# rpm -qa | grep kvm qemu-kvm-rhev-0.12.1.2-2.295.el6.10.x86_64 qemu-kvm-rhev-tools-0.12.1.2-2.295.el6.10.x86_64 Node where KVM version is showing in the manager node002 ~]# rpm -qa | grep kvm qemu-kvm-tools-0.12.1.2-2.295.el6_3.8.x86_64 qemu-kvm-0.12.1.2-2.295.el6_3.8.x86_64 thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] API usage - 3.1
>> > > cdroms is a sub-collection of vm, you have to: > > 1. create vm > 2. insert cd in to cdrom (this is done via updating cdrom) > 3. run vm specifying CD as first boot device > based on my previous posts i dont suppose you have a working example do you as i am having great difficulty making it work how i would imagine. I can create the VM fine, set the boot order and have the console all correct, its just 'attaching' the iso that is the issue. > i'd also suggest you looking in to the sdk (python/java), > you may find it easier than working with api directly over http. if i were starting from scratch you may well be correct, its just this is a small piece of some larger orchestration and its all a bit too embedded as is to start to rework it at this time. thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] egine-iso-uploader error
On 17 Jan 2013, at 11:31, Juan Jose wrote: > Hello everybody, > > I have been able to solve my NFS problems and now I have configured ISO > resource and a data resource in datacenter but when I try to execute the > command "engine-iso-uploader" I can see below error: > > [root@ovirt-engine ~]# engine-iso-uploader -v list > Please provide the REST API password for the admin@internal oVirt Engine user > (CTRL+D to abort): > ERROR: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. > INFO: Use the -h option to see usage. > DEBUG: Configuration: > DEBUG: command: list > DEBUG: Traceback (most recent call last): > DEBUG: File "/bin/engine-iso-uploader", line 931, in > DEBUG: isoup = ISOUploader(conf) > DEBUG: File "/bin/engine-iso-uploader", line 331, in __init__ > DEBUG: self.list_all_ISO_storage_domains() > DEBUG: File "/bin/engine-iso-uploader", line 381, in > list_all_ISO_storage_domains > DEBUG: if not self._initialize_api(): > DEBUG: File "/bin/engine-iso-uploader", line 358, in _initialize_api > DEBUG: password=self.configuration.get("passwd")) > DEBUG: File "/usr/lib/python2.7/site-packages/ovirtsdk/api.py", line 78, in > __init__ > DEBUG: debug=debug > DEBUG: File > "/usr/lib/python2.7/site-packages/ovirtsdk/infrastructure/connectionspool.py", > line 47, in __init__ > DEBUG: debug=debug)) > DEBUG: File "/usr/lib/python2.7/site-packages/ovirtsdk/web/connection.py", > line 38, in __init__ > DEBUG: timeout=timeout) > DEBUG: File "/usr/lib/python2.7/site-packages/ovirtsdk/web/connection.py", > line 102, in __createConnection > DEBUG: raise NoCertificatesError > DEBUG: NoCertificatesError: [ERROR]::ca_file (CA certificate) must be > specified for SSL connection. > > I have one Fedora 17 oVirt engine 3.1 installed with a Fedora 17 host. > Someone can show me what is the problem and how is it solved, please? > > Many thanks in avanced, > > Juanjo. LMGTFY http://www.mail-archive.com/users@ovirt.org/msg05399.html ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] API usage - 3.1
>> > > thankyou - i am however finding it hard to attach an iso image to a VM - I > have the console etc sorted however what would be required to do the same > with an iso image? > > The below is working apart from the iso > > thanks > > vm_template = """ > %s > > Default > > > Blank > > server > 536870912 > > vnc > > > > > > > > > """ > i have also tried as per the docs but no joy ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] API usage - 3.1
> > 1. you can find elements names in api schema (download it from [1] on your > rhevm server). > 2. vm creation details/examples can be found at [2]. > > [1] http://server:[port]/api?schema > [2] > https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.1/pdf/Developer_Guide/Red_Hat_Enterprise_Virtualization-3.1-Developer_Guide-en-US.pdf > thankyou - i am however finding it hard to attach an iso image to a VM - I have the console etc sorted however what would be required to do the same with an iso image? The below is working apart from the iso thanks vm_template = """ %s Default Blank server 536870912 vnc """ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Adding Iscsi storage to Ovirt All-in-one config
> >> >>> true. until we support mixed storage. >> >> is that an item on the roadmap? >> > > yes. usually dubbed "SDM"[1], but has several milestones needed before we get > there. > [1] granularity of storage domain, rather than SPM - pool level granualrity. > Great to hear - any clues on a general non committed to rough date? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Adding Iscsi storage to Ovirt All-in-one config
> true. until we support mixed storage. is that an item on the roadmap? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] API usage - 3.1
> > the name of the element is (not ). > > Many thanks - got it Can i also ask is it possible to set an iso to boot from, the boot order and also the console type and if so what are those elements called? cheers ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Adding Iscsi storage to Ovirt All-in-one config
> you still can't mix different types of storage (local/iscsi) in same DC, so > you need to add another DC for the hosts which will use the iscsi storage. i can understand this for a cluster but not for a dc - What is the reason to stop having different cluster types within a DC ? thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] API usage - 3.1
Trying to get going adding VM's via the API and so far have managed to get quite far - I am however facing this vm_template = """ %s Default Blank server 536870912 """ The VM is created but the type ends up being a desktop and not a server - What did i do wrong? thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Error in Cron config?
Hi - just enabled mail out from my HV's and i am seeing this /etc/cron.hourly/vdsm-logrotate: error: /etc/logrotate.d/vdsm:18 unknown option 'su' -- ignoring line error: /etc/logrotate.d/vdsm:18 unexpected text I use dreyou however i am doubtful he created this file [root@ovirt-node002 ~]# rpm -qf /etc/logrotate.d/vdsm vdsm-4.10.1-0.77.20.el6.x86_64 thanks___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.1 - VM Migration Issue
>> libvirtError: internal error Process exited while reading console log outpu > could this be related to selinux? can you try disabling it and see if > migration succeeds? It was indeed the case! my src node was set to disabled and my destination node was enforcing, this was due to the destination being the first HV built and therefore provisioned slightly differently, my kickstart server is a VM in the pool. Its interesting that a VM can be provisioned onto a node that is set to enforcing and yet not migrated to. thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.1 - VM Migration Issue
59::libvirtvm::278::vm.Vm::(_getDiskLatency) > vmId=`7b8f725b-0a67-46d4-a3cf-db43daad0c42`::Disk vda latency not available > Thread-1484341::DEBUG::2013-01-08 > 10:41:09,559::libvirtvm::278::vm.Vm::(_getDiskLatency) > vmId=`9dc63ce4-0f76-4963-adfe-6f8eb1a44806`::Disk vda latency not available > Thread-1484341::DEBUG::2013-01-08 > 10:41:09,559::libvirtvm::278::vm.Vm::(_getDiskLatency) > vmId=`e8683e88-f3f2-4fe9-80f7-f4888d8e7a13`::Disk vda latency not available > Thread-1484337::ERROR::2013-01-08 10:41:09,754::vm::258::vm.Vm::(run) > vmId=`cfb17b98-1476-4fbf-9fab-7c7f48b60adf`::Failed to migrate > Traceback (most recent call last): > File "/usr/share/vdsm/vm.py", line 245, in run >self._startUnderlyingMigration() > File "/usr/share/vdsm/libvirtvm.py", line 474, in _startUnderlyingMigration >None, maxBandwidth) > File "/usr/share/vdsm/libvirtvm.py", line 510, in f >ret = attr(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line > 83, in wrapper >ret = f(*args, **kwargs) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1103, in > migrateToURI2 >if ret == -1: raise libvirtError ('virDomainMigrateToURI2() failed', > dom=self) > libvirtError: internal error Process exited while reading console log output: > > any chance you attach libvirtd.log and qemu log (/var/log/libvirt/qemu/{}.log? > > Danken - any insights? > > - Original Message - >> From: "Tom Brown" >> To: "Roy Golan" >> Cc: "Haim Ateya" , users@ovirt.org >> Sent: Tuesday, January 8, 2013 11:50:26 AM >> Subject: Re: [Users] oVirt 3.1 - VM Migration Issue >> >> >>> can you attach the same snip from the src VDSM 10.192.42.196 as >>> well? >> >> The log is pretty chatty therefore i did another migration attempt >> and snipd'd the new >> log from both sides. >> >> see attached >> >> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ISO import issue
> > > > I have in the past imported iso's without issue however since returning from > the holiday break i tried today and got this > > [root@ovirt-manager ~]# engine-iso-uploader -v -i iso upload openfiler.iso > Please provide the REST API password for the admin@internal oVirt Engine user > (CTRL+D to abort): > ERROR: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. > INFO: Use the -h option to see usage. > DEBUG: Configuration: > DEBUG: command: upload > DEBUG: Traceback (most recent call last): > DEBUG: File "/usr/bin/engine-iso-uploader", line 931, in > DEBUG: isoup = ISOUploader(conf) > DEBUG: File "/usr/bin/engine-iso-uploader", line 333, in __init__ > DEBUG: self.upload_to_storage_domain() > DEBUG: File "/usr/bin/engine-iso-uploader", line 677, in > upload_to_storage_domain > DEBUG: (id, address, path) = > self.get_host_and_path_from_ISO_domain(self.configuration.get('iso_domain')) > DEBUG: File "/usr/bin/engine-iso-uploader", line 424, in > get_host_and_path_from_ISO_domain > DEBUG: if not self._initialize_api(): > DEBUG: File "/usr/bin/engine-iso-uploader", line 358, in _initialize_api > DEBUG: password=self.configuration.get("passwd")) > DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/api.py", line 78, in > __init__ > DEBUG: debug=debug > DEBUG: File > "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/connectionspool.py", > line 47, in __init__ > DEBUG: debug=debug)) > DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", > line 38, in __init__ > DEBUG: timeout=timeout) > DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", > line 102, in __createConnection > DEBUG: raise NoCertificatesError > DEBUG: NoCertificatesError: [ERROR]::ca_file (CA certificate) must be > specified for SSL connection. > > Nothing has changed from my side so i wonder if there are any ideas as to why > this has just started happening ? > > thanks > > [root@ovirt-manager ovirt-engine]# rpm -qa | grep ovirt > ovirt-image-uploader-3.1.0-16.el6.noarch > ovirt-engine-backend-3.1.0-3.19.el6.noarch > ovirt-engine-setup-3.1.0-3.19.el6.noarch > ovirt-engine-notification-service-3.1.0-3.19.el6.noarch > ovirt-log-collector-3.1.0-16.el6.noarch > ovirt-iso-uploader-3.1.0-16.el6.noarch > ovirt-engine-jbossas711-1-0.x86_64 > ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch > ovirt-engine-genericapi-3.1.0-3.19.el6.noarch > ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch > ovirt-engine-config-3.1.0-3.19.el6.noarch > ovirt-engine-3.1.0-3.19.el6.noarch > ovirt-engine-sdk-3.2.0.2-1.el6.noarch > ovirt-release-el6-4-2.noarch > ovirt-engine-restapi-3.1.0-3.19.el6.noarch > ovirt-engine-userportal-3.1.0-3.19.el6.noarch > ovirt-engine-tools-common-3.1.0-3.19.el6.noarch > ovirt-engine-cli-3.2.0.5-1.el6.noarch > solved - ovirt-engine-sdk mismatch issue, seems installing ovirt-engine-cli updated that package and i hadn't noticed thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] ISO import issue
Hi I have in the past imported iso's without issue however since returning from the holiday break i tried today and got this [root@ovirt-manager ~]# engine-iso-uploader -v -i iso upload openfiler.iso Please provide the REST API password for the admin@internal oVirt Engine user (CTRL+D to abort): ERROR: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. INFO: Use the -h option to see usage. DEBUG: Configuration: DEBUG: command: upload DEBUG: Traceback (most recent call last): DEBUG: File "/usr/bin/engine-iso-uploader", line 931, in DEBUG: isoup = ISOUploader(conf) DEBUG: File "/usr/bin/engine-iso-uploader", line 333, in __init__ DEBUG: self.upload_to_storage_domain() DEBUG: File "/usr/bin/engine-iso-uploader", line 677, in upload_to_storage_domain DEBUG: (id, address, path) = self.get_host_and_path_from_ISO_domain(self.configuration.get('iso_domain')) DEBUG: File "/usr/bin/engine-iso-uploader", line 424, in get_host_and_path_from_ISO_domain DEBUG: if not self._initialize_api(): DEBUG: File "/usr/bin/engine-iso-uploader", line 358, in _initialize_api DEBUG: password=self.configuration.get("passwd")) DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/api.py", line 78, in __init__ DEBUG: debug=debug DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/connectionspool.py", line 47, in __init__ DEBUG: debug=debug)) DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 38, in __init__ DEBUG: timeout=timeout) DEBUG: File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 102, in __createConnection DEBUG: raise NoCertificatesError DEBUG: NoCertificatesError: [ERROR]::ca_file (CA certificate) must be specified for SSL connection. Nothing has changed from my side so i wonder if there are any ideas as to why this has just started happening ? thanks [root@ovirt-manager ovirt-engine]# rpm -qa | grep ovirt ovirt-image-uploader-3.1.0-16.el6.noarch ovirt-engine-backend-3.1.0-3.19.el6.noarch ovirt-engine-setup-3.1.0-3.19.el6.noarch ovirt-engine-notification-service-3.1.0-3.19.el6.noarch ovirt-log-collector-3.1.0-16.el6.noarch ovirt-iso-uploader-3.1.0-16.el6.noarch ovirt-engine-jbossas711-1-0.x86_64 ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch ovirt-engine-genericapi-3.1.0-3.19.el6.noarch ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch ovirt-engine-config-3.1.0-3.19.el6.noarch ovirt-engine-3.1.0-3.19.el6.noarch ovirt-engine-sdk-3.2.0.2-1.el6.noarch ovirt-release-el6-4-2.noarch ovirt-engine-restapi-3.1.0-3.19.el6.noarch ovirt-engine-userportal-3.1.0-3.19.el6.noarch ovirt-engine-tools-common-3.1.0-3.19.el6.noarch ovirt-engine-cli-3.2.0.5-1.el6.noarch ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] What do you want to see in oVirt next?
> - Original Message - >> From: "Tom Brown" >> To: "users@oVirt.org" >> Sent: Thursday, January 3, 2013 7:47:00 PM >> Subject: Re: [Users] What do you want to see in oVirt next? >> >> I'd like to see a spice client for Mac - i know of various ports but >> as of now on 10.8 i have to use VNC which is not ideal. I now spice >> != ovirt however they are very linked at this time. > > What do you mean? a client or a browser plugin? > i suppose ideally both - a browser plugin would be great as then interaction between the GUI and the console would be seamless with the ability to use a standalone client if it were required. thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] What do you want to see in oVirt next?
>> >> For me, I'd like to see official rpms for RHEL6/CentOS6. According to >> the traffic on this list quite a lot are using Dreyou's packages. > > I'm going to second this strongly! Official support would be very much > appreciated. Bonus points for supporting a migration from the dreyou > packages. No offense to dreyou, of course, just rather be better supported by > the official line on Centos 6.x. > and one more for good measure! > Better support/integration of windows based SPICE clients would also be much > appreciated, I have many end users on Windows, and it's been a chore to keep > it working so far. This includes the client drivers for windows VMs to > support the SPICE display for multiple displays. More of a client side thing, > I know, but a desired feature in my environment. > I'd like to see a spice client for Mac - i know of various ports but as of now on 10.8 i have to use VNC which is not ideal. I now spice != ovirt however they are very linked at this time. > Thanks for the continued progress and support as well! > indeed! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Newbie Host Install issue
> I am running fedora 17 and was able to get ovirt running on the machine but I > am unable to add that same machine as a 'host' > > I am sure I am missing something simple... > > > 2013-01-03 08:05:15,821 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Assigning unique > id 00:24:21:e2:1d:36 to Host. (Stage: Get the unique vds id) > 2013-01-03 08:05:15,825 ERROR > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) /bin/bash: /usr/sbin/dmidecode: No such file or directory > > 2013-01-03 08:05:15,825 ERROR [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Error: /bin/bash: > /usr/sbin/dmidecode: No such file or directory > . (Stage: Upload Installation script to Host) > 2013-01-03 08:05:15,826 INFO [org.ovirt.engine.core.bll.InstallerMessages] > (pool-3-thread-15) [435d4bf] VDS message: /bin/bash: /usr/sbin/dmidecode: No > such file or directory > 2013-01-03 08:05:15,826 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) RunSSHCommand returns true > 2013-01-03 08:05:15,826 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Executing > installation stage. (Stage: Upload Installation script to Host) > 2013-01-03 08:05:15,827 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) Uploading file > /usr/share/ovirt-engine/scripts/vds_installer.py to > /tmp/vds_installer_094faf65-68ea-4b9d-a8ce-ed731b33437a.py on 192.168.1.64 > 2013-01-03 08:05:15,828 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) Uploading file > /usr/share/ovirt-engine/scripts/vds_installer.py to > /tmp/vds_installer_094faf65-68ea-4b9d-a8ce-ed731b33437a.py on 192.168.1.64 > 2013-01-03 08:05:19,572 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. successfully done > sftp operation ( Stage: Upload Installation script to Host) > 2013-01-03 08:05:19,573 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) return true > 2013-01-03 08:05:19,575 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) Uploading file /tmp/firewall.conf7265875011780210442.tmp > to /tmp/firewall.conf.094faf65-68ea-4b9d-a8ce-ed731b33437a on 192.168.1.64 > 2013-01-03 08:05:19,576 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) Uploading file /tmp/firewall.conf7265875011780210442.tmp > to /tmp/firewall.conf.094faf65-68ea-4b9d-a8ce-ed731b33437a on 192.168.1.64 > 2013-01-03 08:05:23,392 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. successfully done > sftp operation ( Stage: Upload Installation script to Host) > 2013-01-03 08:05:23,393 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) return true > 2013-01-03 08:05:23,394 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Executing > installation stage. (Stage: Running first installation script on Host) > 2013-01-03 08:05:23,395 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Sending SSH > Command chmod +x /tmp/vds_installer_094faf65-68ea-4b9d-a8ce-ed731b33437a.py; > /tmp/vds_installer_094faf65-68ea-4b9d-a8ce-ed731b33437a.py -c > 'ssl=true;management_port=54321' -O 'rut3.com' -t 2013-01-03T16:05:15 -f > /tmp/firewall.conf.094faf65-68ea-4b9d-a8ce-ed731b33437a -p 80 -b > http://virt03.att.net:80/Components/vds/ > http://virt03.att.net:80/Components/vds/ 192.168.1.64 > 094faf65-68ea-4b9d-a8ce-ed731b33437a False. (Stage: Running first > installation script on Host) > 2013-01-03 08:05:23,397 INFO > [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] > (pool-3-thread-15) Invoking chmod +x > /tmp/vds_installer_094faf65-68ea-4b9d-a8ce-ed731b33437a.py; > /tmp/vds_installer_094faf65-68ea-4b9d-a8ce-ed731b33437a.py -c > 'ssl=true;management_port=54321' -O 'rut3.com' -t 2013-01-03T16:05:15 -f > /tmp/firewall.conf.094faf65-68ea-4b9d-a8ce-ed731b33437a -p 80 -b > http://virt03.att.net:80/Components/vds/ > http://virt03.att.net:80/Components/vds/ 192.168.1.64 > 094faf65-68ea-4b9d-a8ce-ed731b33437a False on 192.168.1.64 > 2013-01-03 08:05:24,400 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Received message: > > > > > . FYI. (Stage: Running first installation script on Host) > 2013-01-03 08:05:25,420 INFO [org.ovirt.engine.core.bll.VdsInstaller] > (pool-3-thread-15) [435d4bf] Installation of 192.168.1.64. Received message: > > > > message='Supported kernel version: [~3.6.10~, ~2.fc17.x86_64~]'/> > m
Re: [Users] oVirt 3.1 - VM Migration Issue
> interesting, please search for migrationCreate command on desination host and > search for ERROR afterwords, what do you see? > > - Original Message - >> From: "Tom Brown" >> To: users@ovirt.org >> Sent: Thursday, January 3, 2013 4:12:05 PM >> Subject: [Users] oVirt 3.1 - VM Migration Issue >> >> >> Hi >> >> I seem to have an issue with a single VM and migration, other VM's >> can migrate OK - When migrating from the GUI it appears to just hang >> but in the engine.log i see the following >> >> 2013-01-03 14:03:10,359 INFO [org.ovirt.engine.core.bll.VdsSelector] >> (ajp--0.0.0.0-8009-59) Checking for a specific VDS only - >> id:a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, >> name:ovirt-node.domain-name, host_name(ip):10.192.42.165 >> 2013-01-03 14:03:10,411 INFO >> [org.ovirt.engine.core.bll.MigrateVmToServerCommand] >> (pool-3-thread-48) [4d32917d] Running command: >> MigrateVmToServerCommand internal: false. Entities affected : ID: >> 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 Type: VM >> 2013-01-03 14:03:10,413 INFO [org.ovirt.engine.core.bll.VdsSelector] >> (pool-3-thread-48) [4d32917d] Checking for a specific VDS only - >> id:a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, >> name:ovirt-node.domain-name, host_name(ip):10.192.42.165 >> 2013-01-03 14:03:11,028 INFO >> [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] >> (pool-3-thread-48) [4d32917d] START, MigrateVDSCommand(vdsId = >> 1a52b722-43a1-11e2-af96-3cd92b4c8e89, >> vmId=9dc63ce4-0f76-4963-adfe-6f8eb1a44806, srcHost=10.192.42.196, >> dstVdsId=a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, >> dstHost=10.192.42.165:54321, migrationMethod=ONLINE), log id: >> 5011789b >> 2013-01-03 14:03:11,030 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] >> (pool-3-thread-48) [4d32917d] VdsBroker::migrate::Entered >> (vm_guid=9dc63ce4-0f76-4963-adfe-6f8eb1a44806, >> srcHost=10.192.42.196, dstHost=10.192.42.165:54321, method=online >> 2013-01-03 14:03:11,031 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] >> (pool-3-thread-48) [4d32917d] START, MigrateBrokerVDSCommand(vdsId = >> 1a52b722-43a1-11e2-af96-3cd92b4c8e89, >> vmId=9dc63ce4-0f76-4963-adfe-6f8eb1a44806, srcHost=10.192.42.196, >> dstVdsId=a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, >> dstHost=10.192.42.165:54321, migrationMethod=ONLINE), log id: >> 7cd53864 >> 2013-01-03 14:03:11,041 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] >> (pool-3-thread-48) [4d32917d] FINISH, MigrateBrokerVDSCommand, log >> id: 7cd53864 >> 2013-01-03 14:03:11,086 INFO >> [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] >> (pool-3-thread-48) [4d32917d] FINISH, MigrateVDSCommand, return: >> MigratingFrom, log id: 5011789b >> 2013-01-03 14:03:11,606 INFO >> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >> (QuartzScheduler_Worker-29) vds::refreshVmList vm id >> 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 is migrating to vds >> ovirt-node.domain-name ignoring it in the refresh till migration is >> done >> 2013-01-03 14:03:12,836 INFO >> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >> (QuartzScheduler_Worker-36) VM test002.domain-name >> 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 moved from MigratingFrom --> Up >> 2013-01-03 14:03:12,837 INFO >> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >> (QuartzScheduler_Worker-36) adding VM >> 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 to re-run list >> 2013-01-03 14:03:12,852 ERROR >> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >> (QuartzScheduler_Worker-36) Rerun vm >> 9dc63ce4-0f76-4963-adfe-6f8eb1a44806. Called from vds >> ovirt-node002.domain-name >> 2013-01-03 14:03:12,855 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] >> (pool-3-thread-48) START, MigrateStatusVDSCommand(vdsId = >> 1a52b722-43a1-11e2-af96-3cd92b4c8e89, >> vmId=9dc63ce4-0f76-4963-adfe-6f8eb1a44806), log id: 4721a1f3 >> 2013-01-03 14:03:12,864 ERROR >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (pool-3-thread-48) Failed in MigrateStatusVDS method >> 2013-01-03 14:03:12,865 ERROR >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (pool-3-thread-48) Error code migrateErr and error message >> VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, >> error = Fatal error during migration >> 2013-01-03 14:03:12,865 INFO >> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] >> (pool-3-thread
[Users] oVirt 3.1 - VM Migration Issue
Hi I seem to have an issue with a single VM and migration, other VM's can migrate OK - When migrating from the GUI it appears to just hang but in the engine.log i see the following 2013-01-03 14:03:10,359 INFO [org.ovirt.engine.core.bll.VdsSelector] (ajp--0.0.0.0-8009-59) Checking for a specific VDS only - id:a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, name:ovirt-node.domain-name, host_name(ip):10.192.42.165 2013-01-03 14:03:10,411 INFO [org.ovirt.engine.core.bll.MigrateVmToServerCommand] (pool-3-thread-48) [4d32917d] Running command: MigrateVmToServerCommand internal: false. Entities affected : ID: 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 Type: VM 2013-01-03 14:03:10,413 INFO [org.ovirt.engine.core.bll.VdsSelector] (pool-3-thread-48) [4d32917d] Checking for a specific VDS only - id:a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, name:ovirt-node.domain-name, host_name(ip):10.192.42.165 2013-01-03 14:03:11,028 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (pool-3-thread-48) [4d32917d] START, MigrateVDSCommand(vdsId = 1a52b722-43a1-11e2-af96-3cd92b4c8e89, vmId=9dc63ce4-0f76-4963-adfe-6f8eb1a44806, srcHost=10.192.42.196, dstVdsId=a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, dstHost=10.192.42.165:54321, migrationMethod=ONLINE), log id: 5011789b 2013-01-03 14:03:11,030 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-3-thread-48) [4d32917d] VdsBroker::migrate::Entered (vm_guid=9dc63ce4-0f76-4963-adfe-6f8eb1a44806, srcHost=10.192.42.196, dstHost=10.192.42.165:54321, method=online 2013-01-03 14:03:11,031 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-3-thread-48) [4d32917d] START, MigrateBrokerVDSCommand(vdsId = 1a52b722-43a1-11e2-af96-3cd92b4c8e89, vmId=9dc63ce4-0f76-4963-adfe-6f8eb1a44806, srcHost=10.192.42.196, dstVdsId=a2d84a1e-3e18-11e2-8851-3cd92b4c8e89, dstHost=10.192.42.165:54321, migrationMethod=ONLINE), log id: 7cd53864 2013-01-03 14:03:11,041 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-3-thread-48) [4d32917d] FINISH, MigrateBrokerVDSCommand, log id: 7cd53864 2013-01-03 14:03:11,086 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (pool-3-thread-48) [4d32917d] FINISH, MigrateVDSCommand, return: MigratingFrom, log id: 5011789b 2013-01-03 14:03:11,606 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-29) vds::refreshVmList vm id 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 is migrating to vds ovirt-node.domain-name ignoring it in the refresh till migration is done 2013-01-03 14:03:12,836 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-36) VM test002.domain-name 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 moved from MigratingFrom --> Up 2013-01-03 14:03:12,837 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-36) adding VM 9dc63ce4-0f76-4963-adfe-6f8eb1a44806 to re-run list 2013-01-03 14:03:12,852 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-36) Rerun vm 9dc63ce4-0f76-4963-adfe-6f8eb1a44806. Called from vds ovirt-node002.domain-name 2013-01-03 14:03:12,855 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-3-thread-48) START, MigrateStatusVDSCommand(vdsId = 1a52b722-43a1-11e2-af96-3cd92b4c8e89, vmId=9dc63ce4-0f76-4963-adfe-6f8eb1a44806), log id: 4721a1f3 2013-01-03 14:03:12,864 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-3-thread-48) Failed in MigrateStatusVDS method 2013-01-03 14:03:12,865 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-3-thread-48) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration 2013-01-03 14:03:12,865 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-3-thread-48) Command org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand return value Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusOnlyReturnForXmlRpc mStatus Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc mCode 12 mMessage Fatal error during migration 2013-01-03 14:03:12,866 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-3-thread-48) Vds: ovirt-node002.itvonline.ads 2013-01-03 14:03:12,867 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (pool-3-thread-48) Command MigrateStatusVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration 2013-01-03 14:03:12,867 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-3-thread-48) FINISH, MigrateStatusVDSCommand, log id: 4721a1f3 Does anyone have any idea what this might be? I am using 3.1 from dreyou as these are CentOS 6 n