[ovirt-users] Re: upgrade issue

[Jingjie Jiang]

Hi Paul,


I got it now.


Thanks a lot,


Jingjie


On 1/16/20 5:02 AM, Staniforth, Paul wrote:

Hi Jingjie,
   It sounds like you are using linux hosts try yum 
check-update and yum update. The ovirt-node-ng-image-update is for 
when you have installed oVirt Node, you can't change from an 
enterprise linux host to a node without deleting the host and 
reinstalling using the oVirt node iso as it installs to a bare-metal 
system.


https://www.ovirt.org/documentation/install-guide/chap-Introduction_to_Hosts.html
Introduction to Hosts | oVirt 
<https://www.ovirt.org/documentation/install-guide/chap-Introduction_to_Hosts.html>
Host Type Other Names Description; oVirt Node: Thin host: This is a 
minimal operating system based on Enterprise Linux. It is distributed 
as an ISO file and contains only the packages required for the machine 
to act as a host.

www.ovirt.org

Regards,
    Paul S.

*From:* Jingjie Jiang 
*Sent:* 15 January 2020 18:25
*To:* Staniforth, Paul ; Parth 
Dhanjal 

*Cc:* users 
*Subject:* Re: [ovirt-users] Re: upgrade issue

*Caution External Mail:* Do not click any links or open any 
attachments unless you trust the sender and know that the content is safe.


Hi Paul,

Thanks for your reply.

I did install ovirt-release43 before I install the 
ovirt-node-ng-image-update package.



Here is the brief procedure:

1. Install the 4.2.8 ovirt host on CentOS7.6 by adding the node from 
AdminPortal.


2. Upgrade ovirt 4.2.8 engine to 4.3.6.

3. Set the host to maintainence from AdminPortal.

4. Yum install ovirt-release43 rpm

    # yum install 
http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm 
<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fresources.ovirt.org%2Fpub%2Fyum-repo%2Fovirt-release43.rpm=02%7C01%7CP.Staniforth%40leedsbeckett.ac.uk%7C0d525d532c154c58539e08d799e7fb77%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637147093957065741=uq2mpS1NASO%2BnSzePccVJRm4m8DxgunPDZZelqf3Y6E%3D=0>


5.Yum install node update package

   # yum install 
https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.6-1.el7.noarch.rpm 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fresources.ovirt.org%2Fpub%2Fovirt-4.3%2Frpm%2Fel7%2Fnoarch%2Fovirt-node-ng-image-update-4.3.6-1.el7.noarch.rpm=02%7C01%7CP.Staniforth%40leedsbeckett.ac.uk%7C0d525d532c154c58539e08d799e7fb77%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637147093957075730=rvoaa06KnxYN18Caz9Sn7CuEwOwcKuJHCw6%2BBaPbLoY%3D=0>


6. reboot


vdsm did not get update.


-Jingjie


On 1/15/20 6:14 AM, Staniforth, Paul wrote:
Hel# yum install 
https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.6-1.el7.noarch.rpmlo 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fresources.ovirt.org%2Fpub%2Fovirt-4.3%2Frpm%2Fel7%2Fnoarch%2Fovirt-node-ng-image-update-4.3.6-1.el7.noarch.rpmlo=02%7C01%7CP.Staniforth%40leedsbeckett.ac.uk%7C0d525d532c154c58539e08d799e7fb77%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637147093957075730=IBTU5Yz8N4Z0dpBynepNMTiHjpgRZgRyPsz3zB96G%2FY%3D=0> 
Jingjie,
   I think you need to install 
https://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fresources.ovirt.org%2Fpub%2Fyum-repo%2Fovirt-release43.rpm=02%7C01%7CP.Staniforth%40leedsbeckett.ac.uk%7C0d525d532c154c58539e08d799e7fb77%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637147093957085722=QTYjvkIEg%2FZTnXSeatNEDEtxXVnYR2r4qdPk77i9%2FZA%3D=0> 
so yum updates to the 4.3 release otherwise it will stay on the 4.2 
release (4.2.8 being the last version).



Regards,
   Paul S.
--------
*From:* Jingjie Jiang  
<mailto:jingjie.ji...@oracle.com>

*Sent:* 14 January 2020 15:30
*To:* Parth Dhanjal  <mailto:dpa...@redhat.com>
*Cc:* users  <mailto:users@ovirt.org>
*Subject:* [ovirt-users] Re: upgrade issue

*Caution External Mail:* Do not click any links or open any 
attachments unless you trust the sender and know that the content is 
safe.


Hi Path,

Thanks for your rely.

Please check my inline comments

-Jingjie

On 1/14/20 2:28 AM, Parth Dhanjal wrote:

Hello Jingjie!

You can follow 
https://www.ovirt.org/documentation/upgrade-guide/chap-Upgrading_from_4.1_to_oVirt_4.2.html 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt.org%2Fdocumentation%2Fupgrade-guide%2Fchap-Upgrading_from_4.1_to_oVirt_4.2.html=02%7C01%7CP.Staniforth%40leedsbeckett.ac.uk%7C0d525d532c154c58539e08d799e7fb77%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637147093957085722=C6%2FuglodX63AQ1hVfs1BD0xGfwNTbarjgRiHtGlN2vI%3D=0>


I tried the above link before and it worked.

But, I'd like to know how  the upgrade with 
ovirt-node-ng-image-update pack

[ovirt-users] Re: upgrade issue

[Jingjie Jiang]

Hi Paul,

Thanks for your reply.

I did install ovirt-release43 before I install the 
ovirt-node-ng-image-update package.



Here is the brief procedure:

1. Install the 4.2.8 ovirt host on CentOS7.6 by adding the node from 
AdminPortal.


2. Upgrade ovirt 4.2.8 engine to 4.3.6.

3. Set the host to maintainence from AdminPortal.

4. Yum install ovirt-release43 rpm

    # yum install 
http://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm


5.Yum install node update package

   # yum install 
https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.6-1.el7.noarch.rpm


6. reboot


vdsm did not get update.


-Jingjie


On 1/15/20 6:14 AM, Staniforth, Paul wrote:
Hel# yum install 
https://resources.ovirt.org/pub/ovirt-4.3/rpm/el7/noarch/ovirt-node-ng-image-update-4.3.6-1.el7.noarch.rpmlo 
Jingjie,
   I think you need to install 
https://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fresources.ovirt.org%2Fpub%2Fyum-repo%2Fovirt-release43.rpm=02%7C01%7Cp.staniforth%40leedsbeckett.ac.uk%7C9ac3f12e79584ad9d21108d7993f68d1%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637146369936590027=BOE0YfK%2F%2FEPkKc8723INi4Y375we1HkkKlclLYsMpx8%3D=0> 
so yum updates to the 4.3 release otherwise it will stay on the 4.2 
release (4.2.8 being the last version).



Regards,
   Paul S.

*From:* Jingjie Jiang 
*Sent:* 14 January 2020 15:30
*To:* Parth Dhanjal 
*Cc:* users 
*Subject:* [ovirt-users] Re: upgrade issue

*Caution External Mail:* Do not click any links or open any 
attachments unless you trust the sender and know that the content is safe.


Hi Path,

Thanks for your rely.

Please check my inline comments

-Jingjie

On 1/14/20 2:28 AM, Parth Dhanjal wrote:

Hello Jingjie!

You can follow 
https://www.ovirt.org/documentation/upgrade-guide/chap-Upgrading_from_4.1_to_oVirt_4.2.html 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt.org%2Fdocumentation%2Fupgrade-guide%2Fchap-Upgrading_from_4.1_to_oVirt_4.2.html=02%7C01%7Cp.staniforth%40leedsbeckett.ac.uk%7C9ac3f12e79584ad9d21108d7993f68d1%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637146369936580031=rNAyw2VK2uDl%2B7%2FuNmFRs%2BCImQR92KmTPOVNkW6sH9U%3D=0>


I tried the above link before and it worked.

But, I'd like to know how  the upgrade with ovirt-node-ng-image-update 
package works.


Any suggestion about the issue I reported in previous email?

Also, about the link you pointed, "imgbase check" command crashed when 
I ran from the ovirt host based on CentOS:


# imgbase check
Traceback (most recent call last):
  File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main
    "__main__", fname, loader, pkg_name)
  File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code
    exec code in run_globals
  File "/usr/lib/python2.7/site-packages/imgbased/__main__.py", line 
53, in 

    CliApplication()
  File "/usr/lib/python2.7/site-packages/imgbased/__init__.py", line 
82, in CliApplication

    app.hooks.emit("post-arg-parse", args)
  File "/usr/lib/python2.7/site-packages/imgbased/hooks.py", line 120, 
in emit

    cb(self.context, *args)
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 185, in post_argparse

    run_check(app)
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 225, in run_check

    status = Health(app).status()
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 358, in status

    status.results.append(group().run())
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 385, in check_thin

    pool = self.app.imgbase._thinpool()
  File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 
120, in _thinpool

    return LVM.Thinpool.from_tag(self.thinpool_tag)
  File "/usr/lib/python2.7/site-packages/imgbased/lvm.py", line 227, 
in from_tag

    assert len(lvs) == 1
AssertionError




Under this link you can find a tab to upgrade the hosts. Instead of
https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fresources.ovirt.org%2Fpub%2Fyum-repo%2Fovirt-release42.rpm=02%7C01%7Cp.staniforth%40leedsbeckett.ac.uk%7C9ac3f12e79584ad9d21108d7993f68d1%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C637146369936580031=b5b5roNp795i0AWvUqTNsS%2FJ9RJ6DHM%2FcOZg5rwxiBs%3D=0> 
You can use 
https://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm 
<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fresources.ovirt.org%2Fpub%2Fyum-repo%2Fovirt-release43.rpm=02%7C01%7Cp.staniforth%40leedsbeckett.ac.uk%7C9ac3f12e79584ad9d21108d7993f68d1%7Cd79a81124fbe417aa112cd0fb490d85c%7C0%7C0%7C63

[ovirt-users] Re: upgrade issue

[Jingjie Jiang]

Hi Path,

Thanks for your rely.

Please check my inline comments

-Jingjie

On 1/14/20 2:28 AM, Parth Dhanjal wrote:

Hello Jingjie!

You can follow 
https://www.ovirt.org/documentation/upgrade-guide/chap-Upgrading_from_4.1_to_oVirt_4.2.html


I tried the above link before and it worked.

But, I'd like to know how  the upgrade with ovirt-node-ng-image-update 
package works.


Any suggestion about the issue I reported in previous email?

Also, about the link you pointed, "imgbase check" command crashed when I 
ran from the ovirt host based on CentOS:


# imgbase check
Traceback (most recent call last):
  File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main
    "__main__", fname, loader, pkg_name)
  File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code
    exec code in run_globals
  File "/usr/lib/python2.7/site-packages/imgbased/__main__.py", line 
53, in 

    CliApplication()
  File "/usr/lib/python2.7/site-packages/imgbased/__init__.py", line 
82, in CliApplication

    app.hooks.emit("post-arg-parse", args)
  File "/usr/lib/python2.7/site-packages/imgbased/hooks.py", line 120, 
in emit

    cb(self.context, *args)
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 185, in post_argparse

    run_check(app)
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 225, in run_check

    status = Health(app).status()
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 358, in status

    status.results.append(group().run())
  File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", 
line 385, in check_thin

    pool = self.app.imgbase._thinpool()
  File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 
120, in _thinpool

    return LVM.Thinpool.from_tag(self.thinpool_tag)
  File "/usr/lib/python2.7/site-packages/imgbased/lvm.py", line 227, in 
from_tag

    assert len(lvs) == 1
AssertionError




Under this link you can find a tab to upgrade the hosts. Instead of
https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm You can 
use https://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm


Regards
Parth Dhanjal

On Mon, Jan 13, 2020 at 11:44 PM > wrote:


Hello,

By following the instruction at

https://www.ovirt.org/documentation/upgrade-guide/appe-Manually_Updating_Hosts.html,
I tried to upgrade host from 4.2.8(CentOS 7.6) to 4.3.7.
After the reboot, the host still running 4.2.8 vdsm.
 # rpm -qa | grep vdsm
vdsm-common-4.20.46-1.el7.noarch
vdsm-yajsonrpc-4.20.46-1.el7.noarch
vdsm-hook-vhostmd-4.20.46-1.el7.noarch
vdsm-4.20.46-1.el7.x86_64
vdsm-client-4.20.46-1.el7.noarch
vdsm-python-4.20.46-1.el7.noarch
vdsm-hook-fcoe-4.20.46-1.el7.noarch
vdsm-network-4.20.46-1.el7.x86_64
vdsm-jsonrpc-4.20.46-1.el7.noarch
vdsm-hook-vmfex-dev-4.20.46-1.el7.noarch
vdsm-http-4.20.46-1.el7.noarch
vdsm-api-4.20.46-1.el7.noarch
vdsm-hook-ethtool-options-4.20.46-1.el7.noarch
vdsm-hook-openstacknet-4.20.46-1.el7.noarch
[root@ovs260 ~]#


Looks like the upgrade did not take place as expected.
Any clue?

Thanks in advance,
Jingjie
___
Users mailing list -- users@ovirt.org 
To unsubscribe send an email to users-le...@ovirt.org

Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/BLE3M55EMIDECUEZ6XWIFYNRHGDYO7RA/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z2N4XTJGZ52HCIHX2TL7VN3JN64AXMM3/

[ovirt-users] upgrade issue

[jingjie . jiang]

Hello,

By following the instruction at 
https://www.ovirt.org/documentation/upgrade-guide/appe-Manually_Updating_Hosts.html,
 I tried to upgrade host from 4.2.8(CentOS 7.6) to 4.3.7.
After the reboot, the host still running 4.2.8 vdsm.
 # rpm -qa | grep vdsm
vdsm-common-4.20.46-1.el7.noarch
vdsm-yajsonrpc-4.20.46-1.el7.noarch
vdsm-hook-vhostmd-4.20.46-1.el7.noarch
vdsm-4.20.46-1.el7.x86_64
vdsm-client-4.20.46-1.el7.noarch
vdsm-python-4.20.46-1.el7.noarch
vdsm-hook-fcoe-4.20.46-1.el7.noarch
vdsm-network-4.20.46-1.el7.x86_64
vdsm-jsonrpc-4.20.46-1.el7.noarch
vdsm-hook-vmfex-dev-4.20.46-1.el7.noarch
vdsm-http-4.20.46-1.el7.noarch
vdsm-api-4.20.46-1.el7.noarch
vdsm-hook-ethtool-options-4.20.46-1.el7.noarch
vdsm-hook-openstacknet-4.20.46-1.el7.noarch
[root@ovs260 ~]# 


Looks like the upgrade did not take place as expected.
Any clue?

Thanks in advance,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BLE3M55EMIDECUEZ6XWIFYNRHGDYO7RA/

[ovirt-users] upgrade the host with ovirt node ng update

[jingjie . jiang]

Hi, 
I have a 4.2.8 host which not installed with ovirt node ng installer.
Can I use 4.3 ovirt node ng update to upgrade it?
If so, is there a instruction to follow?

Thanks,
Jingjie 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/H46XV3EWCEC4OISPWPERSSAGR6RXIQ7X/

[ovirt-users] Re: Gluster setup

[Jingjie Jiang]

What is the output of "nmcli general hostname" ?


On 11/15/19 7:15 AM, rob.dow...@orbitalsystems.co.uk wrote:

I have set up a 3 node system.

Gluster has its own backend network and I have tried entering the FQDN hosts 
via ssh as follows...
gfs1.gluster.private10.10.45.11
gfs2.gluster.private10.10.45.12 
gfs3.gluster.private10.10.45.13

I entered at /etc/hosts

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
gfs1.gluster.private10.10.45.11
gfs2.gluster.private10.10.45.12
gfs3.gluster.private10.10.45.13

but on the CLI

host gfs1.gluster.private

returns

[root@ovirt1 etc]# host gfs1.gluster.private
Host gfs1.gluster.private not found: 3(NXDOMAIN)
[root@ovirt1 etc]#

I guess this is the wrong hosts file, resolver.conf lists files first for 
lookup...
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ILABGNZFOH5BP6JW7VZIEA4GIZE7DXUT/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LQ3SP4KX4PC77Q57YC6KBZ7OTQD2TBT4/

[ovirt-users] Re: ovirt-engine-appliance ova

[Jingjie Jiang]

Hi Didi,

Thanks for your reply.

I was running "make" from CentOS 7 on x86_64 hardware.

# head /etc/os-release
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/;
BUG_REPORT_URL="https://bugs.centos.org/;

-Jingjie


On 7/24/19 2:11 PM, Yuval Turgeman wrote:
What system are you running `make` on ?  There's some logic before 
that iirc (like which repos to install from etc).  Basically, 
ovirt-appliance/automation/build-artifacts.sh is the place to go.



On Tuesday, July 23, 2019, Yedidyah Bar David <mailto:d...@redhat.com>> wrote:


On Mon, Jul 22, 2019 at 11:53 PM Jingjie Jiang
mailto:jingjie.ji...@oracle.com>> wrote:

Hi David,


(Actually it's "Yedidyah" or "Didi")

Thanks for your info.

Please check my reply inline.


-Jingjie

On 7/16/19 3:55 AM, Yedidyah Bar David wrote:

On Thu, Jul 11, 2019 at 10:46 PM  
<mailto:jingjie.ji...@oracle.com>  wrote:

Hi,
Can someone tell me how to generate  ovirt-engine-appliance ova file in 
ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?

You might want to check the project's source code:

https://github.com/ovirt/ovirt-appliance/  
<https://github.com/ovirt/ovirt-appliance/>

Or study the logs of a CI build of it:


https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/  
<https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/>

I never tried building it myself locally, though.


I tried to build after checked out the source code from
https://github.com/ovirt/ovirt-appliance/
<https://github.com/ovirt/ovirt-appliance/>,

but the build failed.

/# make//
//livemedia-creator --make-disk --ram=2048 --vcpus=4
--iso=boot.iso --ks=ovirt-engine-appliance.ks --qcow2
--image-name=ovirt-engine-appliance.qcow2//
//2019-07-22 12:34:00,095: livemedia-creator 19.7.19-1//
//2019-07-22 12:34:00,154: disk_size = 51GiB//
//2019-07-22 12:34:00,154: disk_img =
/var/tmp/ovirt-engine-appliance.qcow2//
//2019-07-22 12:34:00,154: install_log =
/root/ovirt/ovirt-appliance/engine-appliance/virt-install.log//
//mount: /dev/loop0 is write-protected, mounting read-only//
//Formatting '/var/tmp/ovirt-engine-appliance.qcow2',
fmt=qcow2 size=54760833024 encryption=off cluster_size=65536
lazy_refcounts=off //
//2019-07-22 12:34:10,195: Running virt-install.//
//
//Starting install...//
//Retrieving file vmlinuz... | 6.3 MB  00:00 //
//Retrieving file initrd.img... |  50 MB  00:00 //
//Domain installation still in progress. You can reconnect to //
//the console to complete the installation process.//
//..//
//2019-07-22 12:35:15,281: Installation error detected. See
logfile.//
//2019-07-22 12:35:15,283: Shutting down
LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55//
//Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 destroyed//
//
//Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 has been
undefined//
//
//2019-07-22 12:35:15,599: unmounting the iso//
//2019-07-22 12:35:20,612: Install failed: virt_install failed//
//2019-07-22 12:35:20,613: Removing bad disk image//
//2019-07-22 12:35:20,613: virt_install failed//
//make: *** [ovirt-engine-appliance.qcow2] Error 1/

In the log I found the error as following from virt-install.log:

/16:35:07,472 ERR anaconda:CmdlineError: The following
mandatory spokes are not completed:#012Installation
source#012Software selection//
//16:35:07,472 DEBUG anaconda:running handleException//
//16:35:07,473 CRIT anaconda:Traceback (most recent call
last):#012#012  File

"/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/simpleline/base.py",
line 352, in _mainloop#012    prompt =
last_screen.prompt(self._screens[-1][1])#012#012 File
"/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/hubs/summary.py",
line 107, in prompt#012    raise
CmdlineError(errtxt)#012#012CmdlineError: The following
mandatory spokes are not completed:#012Installation
source#012Software selection//
//16:35:08,020 DEBUG anaconda:Gtk cannot be initialized//
//16:35:08,020 DEBUG anaconda:In the main thread, running
exception handler//
//16:35:08,386 NOTICE multipathd:zram0: add path (uevent)//
//16:35:08,386 NOTI

[ovirt-users] Re: ovirt-engine-appliance ova

[Jingjie Jiang]

Hi David,

Thanks for your info.

Please check my reply inline.


-Jingjie

On 7/16/19 3:55 AM, Yedidyah Bar David wrote:

On Thu, Jul 11, 2019 at 10:46 PM  wrote:

Hi,
Can someone tell me how to generate  ovirt-engine-appliance ova file in 
ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?

You might want to check the project's source code:

https://github.com/ovirt/ovirt-appliance/

Or study the logs of a CI build of it:

https://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/

I never tried building it myself locally, though.


I tried to build after checked out the source code from 
https://github.com/ovirt/ovirt-appliance/,


but the build failed.

/# make//
//livemedia-creator --make-disk --ram=2048 --vcpus=4 --iso=boot.iso 
--ks=ovirt-engine-appliance.ks --qcow2 
--image-name=ovirt-engine-appliance.qcow2//

//2019-07-22 12:34:00,095: livemedia-creator 19.7.19-1//
//2019-07-22 12:34:00,154: disk_size = 51GiB//
//2019-07-22 12:34:00,154: disk_img = 
/var/tmp/ovirt-engine-appliance.qcow2//
//2019-07-22 12:34:00,154: install_log = 
/root/ovirt/ovirt-appliance/engine-appliance/virt-install.log//

//mount: /dev/loop0 is write-protected, mounting read-only//
//Formatting '/var/tmp/ovirt-engine-appliance.qcow2', fmt=qcow2 
size=54760833024 encryption=off cluster_size=65536 lazy_refcounts=off //

//2019-07-22 12:34:10,195: Running virt-install.//
//
//Starting install...//
//Retrieving file vmlinuz... | 6.3 MB  00:00 //
//Retrieving file initrd.img... |  50 MB  00:00 //
//Domain installation still in progress. You can reconnect to //
//the console to complete the installation process.//
//..//
//2019-07-22 12:35:15,281: Installation error detected. See logfile.//
//2019-07-22 12:35:15,283: Shutting down 
LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55//

//Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 destroyed//
//
//Domain LiveOS-27f2dc2b-4b30-4eb1-adcd-b5ab50fdbf55 has been undefined//
//
//2019-07-22 12:35:15,599: unmounting the iso//
//2019-07-22 12:35:20,612: Install failed: virt_install failed//
//2019-07-22 12:35:20,613: Removing bad disk image//
//2019-07-22 12:35:20,613: virt_install failed//
//make: *** [ovirt-engine-appliance.qcow2] Error 1/

In the log I found the error as following from virt-install.log:

/16:35:07,472 ERR anaconda:CmdlineError: The following mandatory spokes 
are not completed:#012Installation source#012Software selection//

//16:35:07,472 DEBUG anaconda:running handleException//
//16:35:07,473 CRIT anaconda:Traceback (most recent call last):#012#012  
File 
"/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/simpleline/base.py", 
line 352, in _mainloop#012    prompt = 
last_screen.prompt(self._screens[-1][1])#012#012  File 
"/usr/lib64/python2.7/site-packages/pyanaconda/ui/tui/hubs/summary.py", 
line 107, in prompt#012    raise 
CmdlineError(errtxt)#012#012CmdlineError: The following mandatory spokes 
are not completed:#012Installation source#012Software selection//

//16:35:08,020 DEBUG anaconda:Gtk cannot be initialized//
//16:35:08,020 DEBUG anaconda:In the main thread, running exception 
handler//

//16:35:08,386 NOTICE multipathd:zram0: add path (uevent)//
//16:35:08,386 NOTICE multipathd:zram0: spurious uevent, path already in 
pathvec//

//16:35:08,386 NOTICE multipathd:zram0: HDIO_GETGEO failed with 25//
//16:35:08,386 ERR multipathd:zram0: failed to get path uid//
//16:35:08,388 ERR multipathd:uevent trigger error/

Can you help me to fix the issue?





I tried to import ovirt-engine-appliance 
ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got 
error as following:
Failed to load VM configuration from OVA file: 
/var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova

No idea why this failed.


I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6.

It has CentOS + oVirt engine.

The only major use for it is by hosted-engine --deploy. In theory you
can try importing it elsewhere, but I do not recall reports about
people that tried this and whether it works.

Best regards,
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IYVWUW227VOP5OBSXFDP3WE6QPL4DRGG/

[ovirt-users] Re: ovirt-engine-appliance ova

[Jingjie Jiang]

On 7/13/2019 6:28 AM, Strahil Nikolov wrote:

I still don't get why you need the OVA .
Are you trying to extract and put it into another virtualization. If 
this is your intention - better install it as if it was a standalone 
engine.


Yes, I am trying to build ova with different OS.

What do you mean install it as standalone engine?

install VM first then install as ovirt engine?


Thanks,

Jingjie




Best Regards,
Strahil Nikolov.

В петък, 12 юли 2019 г., 21:48:35 ч. Гринуич+3, Jingjie Jiang 
 написа:



Hi Strahil,

Thanks for your reply.

Can you share the procedure of creating ovirt-engine-appliance ova?


Thanks,

Jingjie


On 7/12/19 12:52 AM, Strahil wrote:

Based on my experience - the OVA contains the xml and the actual disk 
of the hosted engine.
Then the deployment starts locally the VM and populates the necessary 
data in it
Once it's over , the deployment shuts down and copies the disk of that 
local VM, undefines it and then ovirt's ha agents are being configured 
- so they can mount the shared storage and power up the VM (special 
tar /OVMF/ file on shared storage has the agent  configuration file).


So , in the ova there should be a template VM + the xml config (cpus, 
ram, devices, etc) .

I would be surprised if there is something else in it.

Best Regards,
Strahil Nikolov

On Jul 11, 2019 23:39, Jingjie Jiang  
<mailto:jingjie.ji...@oracle.com> wrote:


Hi Strahil,

Yes, you are right.

After install ovirt-engine-appliance rpm, the ova file will be
save at

/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190610.1.el7.ova

I was trying to understand what the ova file included.

I thought it only has the CentOS7.6.

I observed that ovirt-engine was installed during "host-engine
--deploy"

Is ovirt-engine-appliance-4.3-20190610.1.el7.ova only used for
deploy host-engine?

Is there a document about how to generate?


Thanks,

Jingjie


On 7/11/19 4:20 PM, Strahil Nikolov wrote:

If I'm not wrong, this rpm is being downloaded to one of the hosts
during self-hosted engine's deployment.
Why would you try to import a second self-hosted engine ?

Best Regards,
Strahil Nikolov


В четвъртък, 11 юли 2019 г., 22:37:56 ч. Гринуич+3,
 <mailto:jingjie.ji...@oracle.com> написа:


Hi,
Can someone tell me how to generate  ovirt-engine-appliance ova
file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
I tried to import ovirt-engine-appliance
ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from
ovirt-engine, but I got error as following:
Failed to load VM configuration from OVA file:
/var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova

I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more
than CentOS7.6.

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-le...@ovirt.org
<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/EP2BMVXRXUM6F3WF77OTKZ75NQKMBYC6/;
rel="nofollow" target="_blank"
moz-do-not-send="true">https://lists.ovirt.org/archives/list/users@o


___ Users mailing list -- 
users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email 
to users-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy 
Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of 
Conduct: https://www.ovirt.org/community/about/community-guidelines/ 
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/OBLCILUNJ2LGZMLVLH2RGMZ5JGNDL43V/
___
Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-le...@ovirt.org 
<mailto:users-le...@ovirt.org>

Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/

List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAFYBELOAPPBRZNJLESBIBK3T53AP6K2/ 



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TBFPAXABOSW3KBGGVX4D3V2NXYPIHR27/

[ovirt-users] Re: ovirt-engine-appliance ova

[Jingjie Jiang]

Hi Strahil,

Thanks for your reply.

Can you share the procedure of creating ovirt-engine-appliance ova?


Thanks,

Jingjie


On 7/12/19 12:52 AM, Strahil wrote:


Based on my experience - the OVA contains the xml and the actual disk 
of the hosted engine.
Then the deployment starts locally the VM and populates the necessary 
data in it
Once it's over , the deployment shuts down and copies the disk of that 
local VM, undefines it and then ovirt's ha agents are being configured 
- so they can mount the shared storage and power up the VM (special 
tar /OVMF/ file on shared storage has the agent  configuration file).


So , in the ova there should be a  template VM + the xml config (cpus, 
ram, devices, etc) .

I would be surprised if there is something else in it.

Best Regards,
Strahil Nikolov

On Jul 11, 2019 23:39, Jingjie Jiang  wrote:

Hi Strahil,

Yes, you are right.

After install ovirt-engine-appliance rpm, the ova file will be
save at

/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190610.1.el7.ova

I was trying to understand what the ova file included.

I thought it only has the CentOS7.6.

I observed that ovirt-engine was installed during "host-engine
--deploy"

Is ovirt-engine-appliance-4.3-20190610.1.el7.ova only used for
deploy host-engine?

Is there a document about how to generate?


Thanks,

Jingjie


On 7/11/19 4:20 PM, Strahil Nikolov wrote:

If I'm not wrong, this rpm is being downloaded to one of the hosts
during self-hosted engine's deployment.
Why would you try to import a second self-hosted engine ?

Best Regards,
Strahil Nikolov


В четвъртък, 11 юли 2019 г., 22:37:56 ч. Гринуич+3,
 <mailto:jingjie.ji...@oracle.com> написа:


Hi,
Can someone tell me how to generate ovirt-engine-appliance ova
file in ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
I tried to import ovirt-engine-appliance
ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from
ovirt-engine, but I got error as following:
Failed to load VM configuration from OVA file:
/var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova

I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more
than CentOS7.6.

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-le...@ovirt.org
<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/EP2BMVXRXUM6F3WF77OTKZ75NQKMBYC6
</" rel="nofollow" target="_blank"
moz-do-not-send="true">https://lists.ovirt.org/archives/list/users@o


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OBLCILUNJ2LGZMLVLH2RGMZ5JGNDL43V/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AAFYBELOAPPBRZNJLESBIBK3T53AP6K2/

[ovirt-users] Re: ovirt-engine-appliance ova

[Jingjie Jiang]

Hi Strahil,

Yes, you are right.

After install ovirt-engine-appliance rpm, the ova file will be save at 
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190610.1.el7.ova


I was trying to understand what the ova file included.

I thought it only has the CentOS7.6.

I observed that ovirt-engine was installed during "host-engine --deploy"

Is ovirt-engine-appliance-4.3-20190610.1.el7.ova only used for deploy 
host-engine?


Is there a document about how to generate?


Thanks,

Jingjie


On 7/11/19 4:20 PM, Strahil Nikolov wrote:
If I'm not wrong, this rpm is being downloaded to one of the hosts 
during self-hosted engine's deployment.

Why would you try to import a second self-hosted engine ?

Best Regards,
Strahil Nikolov


В четвъртък, 11 юли 2019 г., 22:37:56 ч. Гринуич+3, 
 написа:



Hi,
Can someone tell me how to generate ovirt-engine-appliance ova file in 
ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
I tried to import ovirt-engine-appliance 
ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, 
but I got error as following:
Failed to load VM configuration from OVA file: 
/var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova


I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than 
CentOS7.6.


Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org 
To unsubscribe send an email to users-le...@ovirt.org 


Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EP2BMVXRXUM6F3WF77OTKZ75NQKMBYC6/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QJYEFWGGQTJFPBCD2OMID7JMFFUCPON5/

[ovirt-users] ovirt-engine-appliance ova

[jingjie . jiang]

Hi,
Can someone tell me how to generate  ovirt-engine-appliance ova file in 
ovirt-engine-appliance-4.3-20190610.1.el7.x86_64.rpm?
I tried to import ovirt-engine-appliance 
ova(ovirt-engine-appliance-4.3-20190610.1.el7.ova) from ovirt-engine, but I got 
error as following:
Failed to load VM configuration from OVA file: 
/var/tmp/ovirt-engine-appliance-4.2-20190121.1.el7.ova

I guess ovirt-engine-appliance-4.2-20190121.1.el7.ova has more than CentOS7.6. 

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EP2BMVXRXUM6F3WF77OTKZ75NQKMBYC6/

[ovirt-users] about Windows guest virtual disk interface - virtio

[jingjie . jiang]

1. create Windows guest from oVirt 4.2.8 env with IDE virtual disk interface
2. follow the instruction from 
https://community.redhat.com/blog/2015/05/how-to-install-and-use-ovirts-windows-guest-tools/
 installed the virtio drivers and ovirt guest agent.
3. Shutdown Windows guest and switch the virtual disk from IDE to virtio-scsi
4. Run the Windows guest and it boot up fine.
5. Shutdown Windows guest and switch the virtual disk to virtio
6. Run the Windows guest but it failed to boot up.

7. Switch the boot disk to virtio-scsi and attach another virtual disk as 
virtio to Windows guest
8. Boot the system up and make sure that viostor driver is installed.
9 switch the boot virtual disk interface to virtio.
10. Boot the Windows guest and it boot up OK.

I was wondering the installer of virtio drivers cover the case of install 
vioscsi driver even without virtio-scsi device but not for virtio device.
Would the dev-team mind confirm?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RW3CBPPCLRKSMNRHAZFBYORDINHLFDW3/

[ovirt-users] Re: oVirt 4.3 - create windows2012 vm failed - kvm_init_vcpu failed

[Jingjie Jiang]

I tried on oVirt4.2.8 and it worked fine.

Is this oVirt 4.3 problem only?



On 3/19/19 4:42 PM, jingjie.ji...@oracle.com wrote:

Hi,

The oVirt 4.3 is installed on CentOS 7.6.
Windows2012 vm failed with following error messages:

2019-03-18 09:19:12,941-04 ERROR 
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(ForkJoinPool-1-worker-15) [] EVENT_ID: VM_DOWN_ERROR(119), VM win12_nfs is 
down with error. Exit message: internal error: qemu unexpectedly closed the 
monitor: 2019-03-18T13:19:11.837850Z qemu-kvm: warning: All CPU(s) up to 
maxcpus should be described in NUMA config, ability to start up with partial 
NUMA mappings is obsoleted and will be removed in future
Hyper-V SynIC is not supported by kernel
2019-03-18T13:19:11.861071Z qemu-kvm: kvm_init_vcpu failed: Function not 
implemented.

Anyone suggestion?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GHUBLKYNM4G5QOIEFY5H7QKPLBDU5H7Z/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TZACJF7WRHZ3PYZ2GKHW4SO3ZS5MM6T7/

[ovirt-users] oVirt 4.3 - create windows2012 vm failed

[jingjie . jiang]

Hi,

The oVirt 4.3 is installed on CentOS 7.6. 
Windows2012 vm failed with following error messages:

2019-03-18 09:19:12,941-04 ERROR 
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(ForkJoinPool-1-worker-15) [] EVENT_ID: VM_DOWN_ERROR(119), VM win12_nfs is 
down with error. Exit message: internal error: qemu unexpectedly closed the 
monitor: 2019-03-18T13:19:11.837850Z qemu-kvm: warning: All CPU(s) up to 
maxcpus should be described in NUMA config, ability to start up with partial 
NUMA mappings is obsoleted and will be removed in future
Hyper-V SynIC is not supported by kernel
2019-03-18T13:19:11.861071Z qemu-kvm: kvm_init_vcpu failed: Function not 
implemented.

Anyone suggestion?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GHUBLKYNM4G5QOIEFY5H7QKPLBDU5H7Z/

[ovirt-users] Re: oVirt 4.3 - create windows2012 failed due to ovirt-imageio-proxy

[Jingjie Jiang]

Hi Edward,

The problem fixed.


Thanks,

Jingjie


On 3/18/19 5:07 PM, Edward Berger wrote:
That is completely normal if you didn't download and install the CA 
certificate from your ovirt engine GUI.

There's a download link for it on the page before you login?

On Mon, Mar 18, 2019 at 5:01 PM > wrote:


Hi,

I tried to create windows2012 vm on nfs data domain, but the disk
was locked.
Found the error message as following:

Connection to ovirt-imageio-proxy service has failed. Make sure
the service is installed, configured, and ovirt-engine certificate
is registered as a valid CA in the browser.

Is this known issue?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org 
To unsubscribe send an email to users-le...@ovirt.org

Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/QBZQG553L7WYVHQFDRWUAYKYZ2HLSJKW/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6KI3N22RY6UCXM6OR73T7WPCXLUOWA5X/

[ovirt-users] oVirt 4.3 - create windows2012 failed due to ovirt-imageio-proxy

[jingjie . jiang]

Hi,

I tried to create windows2012 vm on nfs data domain, but the disk was locked.
Found the error message as following:

Connection to ovirt-imageio-proxy service has failed. Make sure the service is 
installed, configured, and ovirt-engine certificate is registered as a valid CA 
in the browser.

Is this known issue?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QBZQG553L7WYVHQFDRWUAYKYZ2HLSJKW/

[ovirt-users] Re: qemu-img info showed iscsi/FC lun size 0

[Jingjie Jiang]

Hi Nir,

I had qcow2 on FC, but qemu-img still showed size is 0.

# qemu-img info 
/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/38cdceea-45d9-4616-8eef-966acff2f7be/8a32c5af-f01f-48f4-9329-e173ad3483b1 

image: 
/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/38cdceea-45d9-4616-8eef-966acff2f7be/8a32c5af-f01f-48f4-9329-e173ad3483b1

file format: qcow2
virtual size: 20G (21474836480 bytes)
*disk size: 0*
cluster_size: 65536
Format specific information:
    compat: 1.1
    lazy refcounts: false
    refcount bits: 16
    corrupt: false

Is the behavior expected?


Thanks,

Jingjie


On 2/22/19 1:53 PM, Nir Soffer wrote:
On Fri, Feb 22, 2019 at 7:14 PM Nir Soffer <mailto:nsof...@redhat.com>> wrote:


On Fri, Feb 22, 2019 at 5:00 PM Jingjie Jiang
mailto:jingjie.ji...@oracle.com>> wrote:

What about qcow2 format?

qcow2 reports the real size regardless of the underlying storage, 
since qcow2 manages
the allocations. However the size is reported in qemu-img check in the 
image-end-offset.


$ dd if=/dev/zero bs=1M count=10 | tr "\0" "\1" > test.raw

$ truncate -s 200m test.raw

$ truncate -s 1g backing

$ sudo losetup -f backing --show
/dev/loop2

$ sudo qemu-img convert -f raw -O qcow2 test.raw /dev/loop2

$ sudo qemu-img info --output json /dev/loop2
{
    "virtual-size": 209715200,
    "filename": "/dev/loop2",
    "cluster-size": 65536,
    "format": "qcow2",
    "actual-size": 0,
    "format-specific": {
        "type": "qcow2",
        "data": {
            "compat": "1.1",
"lazy-refcounts": false,
"refcount-bits": 16,
            "corrupt": false
        }
    },
    "dirty-flag": false
}

$ sudo qemu-img check --output json /dev/loop2
{
    "image-end-offset": 10813440,
    "total-clusters": 3200,
    "check-errors": 0,
    "allocated-clusters": 160,
    "filename": "/dev/loop2",
    "format": "qcow2"
}

We use this for reducing volumes to optimal size after merging 
snapshots, but

we don't report this value to engine.

Is there a choice  to create vm disk with format qcow2 instead
of raw?

Not for LUNs, only for images.

The available formats in 4.3 are documented here:

https://ovirt.org/develop/release-management/features/storage/incremental-backup.html#disk-format

incremental means you checked the checkbox "Enable incremental
backup" when creating a disk.
But note that the fact that we will create qcow2 image is
implementation detail and the behavior
may change in the future. For example, qemu is expected to provide
a way to do incremental
backup with raw volumes, and in this case we may create a raw
volume instead of qcow2 volume.
(actually raw data volume and qcow2 metadata volume).

If you want to control the disk format, the only way is via the
REST API or SDK, where you can
specify the format instead of allocation policy. However even if
you specify the format in the SDK
the system may chose to change the format when copying the disk to
another storage type. For
example if you copy qcow2/sparse image from block storage to file
storage the system will create
a raw/sparse image.

If you desire to control the format both from the UI and REST
API/SDK and ensure that the system
will never change the selected format please file a bug explaining
the use case.

On 2/21/19 5:46 PM, Nir Soffer wrote:



On Thu, Feb 21, 2019, 21:48 mailto:jingjie.ji...@oracle.com> wrote:

Hi,
Based on oVirt 4.3.0, I have data domain from FC lun,
then I create new vm on the disk from FC data domain.
After VM was created. According to qemu-img info, the
disk size is 0.
# qemu-img info

/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b

image:

/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b
file format: raw
virtual size: 10G (10737418240 bytes)
disk size: 0

I tried on iscsi and same result.

Is the behaviour expected?


It is expected in a way. Disk size is the amount of storage
actually used, and block devices has no way to tell that.

oVirt report the size of the block device in this case, which
is more accurate than zero.

However the real size allocated on the undrelying storage is
somewhere between 

[ovirt-users] Re: qemu-img info showed iscsi/FC lun size 0

[Jingjie Jiang]

Hi Nir,

Thanks for your reply.

What about qcow2 format?

Is there a choice  to create vm disk with format qcow2 instead of raw?


Thanks,

Jingjie


On 2/21/19 5:46 PM, Nir Soffer wrote:



On Thu, Feb 21, 2019, 21:48  wrote:


Hi,
Based on oVirt 4.3.0, I have data domain from FC lun, then I
create new vm on the disk from FC data domain.
After VM was created. According to qemu-img info, the disk size is 0.
# qemu-img info

/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b

image:

/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b
file format: raw
virtual size: 10G (10737418240 bytes)
disk size: 0

I tried on iscsi and same result.

Is the behaviour expected?


It is expected in a way. Disk size is the amount of storage actually 
used, and block devices has no way to tell that.


oVirt report the size of the block device in this case, which is more 
accurate than zero.


However the real size allocated on the undrelying storage is somewhere 
between zero an device size, and depends on the imlementation of the 
storage. Nither qemu-img nor oVirt can tell the real size.


Nir


Thanks,
Jingjie

___
Users mailing list -- users@ovirt.org 
To unsubscribe send an email to users-le...@ovirt.org

Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/TSXP7RENWIFMHIJWIAF6AGQPI3NOVNIZ/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OEWJQGCXOPB5EDAODL4JCWGXDWN7KOQ3/

[ovirt-users] qemu-img info showed iscsi/FC lun size 0

[jingjie . jiang]

Hi,
Based on oVirt 4.3.0, I have data domain from FC lun, then I create new vm on 
the disk from FC data domain.
After VM was created. According to qemu-img info, the disk size is 0.
# qemu-img info 
/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b
 
image: 
/rhev/data-center/mnt/blockSD/eaa6f641-6b36-4c1d-bf99-6ba77df3156f/images/8d3b455b-1da4-49f3-ba57-8cda64aa9dc9/949fa315-3934-4038-85f2-08aec52c1e2b
file format: raw
virtual size: 10G (10737418240 bytes)
disk size: 0

I tried on iscsi and same result.

Is the behaviour expected? 

Thanks,
Jingjie
 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TSXP7RENWIFMHIJWIAF6AGQPI3NOVNIZ/

[ovirt-users] Re: About ovirt guest agent for Linux 6 and 5

[jingjie . jiang]

Michal,
Thanks for your reply.
Is the package at
https://dl.fedoraproject.org/pub/archive/epel/5/x86_64/ovirt-guest-agent-1.0.13-2.el5.noarch.rpm
 for Linux 5?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/72FQPTJ4TVNWBMS6OOCAOBMD5HTZGCK6/

[ovirt-users] About ovirt guest agent for Linux 6 and 5

[jingjie . jiang]

Hi, 
What the ovirt guest agent packages should be used for Linux 6 and 5?
I found one for Linux 6 at 
http://rpmfind.net/linux/epel/6/x86_64/Packages/o/ovirt-guest-agent-1.0.13-2.el6.noarch.rpm.
What about https://resources.ovirt.org/? Any guest agent package for Linux 6 
and 5 over there?

Thanks,
Jingjie
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4OB7BNOE5ZQ67M5CMANHESHKU6KBEAWU/

[ovirt-users] Re: Unable to install oVirt on RHEL7.5

[Jingjie Jiang]

Sumit,

You may need to enable the other repos which have the dependency packages.

Check the repo config files.


-Jingjie


On 12/17/18 1:16 AM, ss00514...@techmahindra.com wrote:

Hi All,

I am unable to install oVirt on RHEL7.5, to install it I am taking reference of 
below link,

https://www.ovirt.org/documentation/install-guide/chap-Installing_oVirt.html

But though it is not working for me, couple of dependencies is not getting 
installed, and because of this I am not able to run the ovirt-engine, below are 
the depencies packages that unable to install,
Error: Package: collectd-write_http-5.8.0-6.1.el7.x86_64 
(@ovirt-4.2-centos-opstools)
Requires: collectd(x86-64) = 5.8.0-6.1.el7
Removing: collectd-5.8.0-6.1.el7.x86_64 (@ovirt-4.2-centos-opstools)
collectd(x86-64) = 5.8.0-6.1.el7
Updated By: collectd-5.8.1-1.el7.x86_64 (epel)
collectd(x86-64) = 5.8.1-1.el7
Available: collectd-5.7.2-1.el7.x86_64 (ovirt-4.2-centos-opstools)
collectd(x86-64) = 5.7.2-1.el7
Available: collectd-5.7.2-3.el7.x86_64 (ovirt-4.2-centos-opstools)
collectd(x86-64) = 5.7.2-3.el7
Available: collectd-5.8.0-2.el7.x86_64 (ovirt-4.2-centos-opstools)
collectd(x86-64) = 5.8.0-2.el7
Available: collectd-5.8.0-3.el7.x86_64 (ovirt-4.2-centos-opstools)
collectd(x86-64) = 5.8.0-3.el7
Available: collectd-5.8.0-5.el7.x86_64 (ovirt-4.2-centos-opstools)
collectd(x86-64) = 5.8.0-5.el7

Help me to install this.

Looking forward to resolve this issue.

Regards
Sumit Sahay



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OWFHS3OEVE5CEGJGRBBW6ZBKYIF5A5G3/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/23IRIBW3XH5Z5XKRQCKGMGH6UWBXYKP6/

[ovirt-users] Re: About Windows guest agent

[Jingjie Jiang]

Hi Sandro,

Thanks for your info.

Please check the inline.


-Jingjie


On 11/21/18 1:55 AM, Sandro Bonazzola wrote:



Il giorno mer 21 nov 2018 alle ore 00:38 Jingjie Jiang 
mailto:jingjie.ji...@oracle.com>> ha scritto:


Hi,

I am new in oVirt and I'd like to get the clarification about the
packages which support the function of Window guest agent from 4.2
release and how to build it.

Welcome to oVirt community!
The Windows Guest Agent is shipped within the Windows Guest Tools ISO.
The reference documentation page is [1] 
https://ovirt.org/documentation/vmm-guide/chap-Installing_Windows_Virtual_Machines/
The feature documentation page is [2] 
https://ovirt.org/develop/release-management/features/integration/windows-guest-tools/
If you have issues while following above [1] please check if [2] solve 
your issue and open a ticket on 
https://github.com/oVirt/ovirt-site/issues reporting any trouble you 
had following the documentation page.



I looked through the document from ovirt.org <http://ovirt.org>,
such as


https://www.ovirt.org/documentation/internal/guest-agent/guest-agent-for-windows/

It mentioned:

/With the release of oVirt 3.5 we have introduced the oVirt WGT
(Windows Guest Tools)./

//

/The oVirt WGT provides an ISO with all the tools and drivers one
needs to install on a Windows VM, with an easy to use installer to
install it all in one step./

//

/So manual compilation and installation of oVirt Guest Agent is no
longer necessary./

//

/The oVirt WGT ISO is included in
//ovirt-guest-tools-iso-3.5-7.noarch.rpm

<http://resources.ovirt.org/pub/ovirt-3.5/rpm/fc20/noarch/ovirt-guest-tools-iso-3.5-7.noarch.rpm>//package./

Now, ovirt-guest-tools-iso is up to 4.2.4. I found the src rpm
from

https://resources.ovirt.org/pub/ovirt-4.2/rpm/el7/SRPMS/ovirt-guest-tools-iso-4.2-4.el7.src.rpm,
but I could not find ovirt-guest-tools-iso from github, only found
ovirt-wgt.

After clone the ovirt-wgt, I got the SPICE-tools-0.141.iso built.

My question is :

1. Is ovirt-wgt used for Windows guest?

ovirt-wgt is a project for building the oVirt Guest Tools ISO and its 
wrapping RPM. It contains VirtIO Windows drivers, SPICE drivers, QEMU 
Guest Agent and oVirt Guest Agent.


2. If so, how can I build ovirt-guest-tools-iso package or
ovirt-tools-setup.iso

You don't really need to, but if you want to do that:
$ sudo yum install 
https://resources.ovirt.org/pub/yum-repo/ovirt-release42.rpm

$ git clone https://gerrit.ovirt.org/ovirt-wgt
$ cd ovirt-wgt
$ yum install `cat automation/build-artifacts.packages`
$ automation/build-artifacts.sh

should do the build.


By following your instruction, I had ovirt-wgt build work, but it 
required ovirt-guest-agent-windows package.
I tried to build ovirt-guest-agent-windows from ovirt-guest-agent (git 
clone https://github.com/oVirt/ovirt-guest-agent.git), failed with the 
error message attached.


I was wondering if the build env missed libs or packages. I run the 
build from Linux env(Fedora), could it be an issue?


Would you mind send me the build instruction?


Thanks,
Jingjie


Current builds are available:
https://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/4.2-4.el7/
https://resources.ovirt.org/pub/ovirt-4.2/rpm/el7/noarch/ovirt-guest-tools-iso-4.2-4.el7.noarch.rpm


Thanks,

Jingjie

//
//

___
Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-le...@ovirt.org
<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:

https://lists.ovirt.org/archives/list/users@ovirt.org/message/OHCOXWEXIU6YFTRISAUIEJBHP5CSJCSV/



--

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA <https://www.redhat.com/>

sbona...@redhat.com <mailto:sbona...@redhat.com>

<https://red.ht/sig>


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QTPU4LJ6XQYJITPWR2JHCRCI3LEYSWE5/
# rpmbuild --clean ovirt-guest-agent-windows.spec 
Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.ttlxBl
+ umask 022
+ cd /root/rpmbuild/BUILD
+ rm -rf ovirt-guest-agent-1.0.14
+ exit 0


# rpmbuild -bb ovirt-guest-agent-windows.spec 
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.KfESBR
+ umask 022
+ cd /root/rpmbuild/BUILD
+ cd /root/rpmbuild/BUILD
+ rm -rf ovirt-guest-agent-1.0.14
+ /usr/bin/bzip2 -dc /root/rpmbuild/SOU

[ovirt-users] About Windows guest agent

[Jingjie Jiang]

Hi,

I am new in oVirt and I'd like to get the clarification about the 
packages which support the function of Window guest agent from 4.2 
release and how to build it.


I looked through the document from ovirt.org, such as

https://www.ovirt.org/documentation/internal/guest-agent/guest-agent-for-windows/

It mentioned:

/With the release of oVirt 3.5 we have introduced the oVirt WGT (Windows 
Guest Tools)./


//

/The oVirt WGT provides an ISO with all the tools and drivers one needs 
to install on a Windows VM, with an easy to use installer to install it 
all in one step./


//

/So manual compilation and installation of oVirt Guest Agent is no 
longer necessary./


//

/The oVirt WGT ISO is included in 
//ovirt-guest-tools-iso-3.5-7.noarch.rpm 
//package./


Now, ovirt-guest-tools-iso is up to 4.2.4. I found the src rpm from 
https://resources.ovirt.org/pub/ovirt-4.2/rpm/el7/SRPMS/ovirt-guest-tools-iso-4.2-4.el7.src.rpm, 
but I could not find ovirt-guest-tools-iso from github, only found 
ovirt-wgt.


After clone the ovirt-wgt, I got the SPICE-tools-0.141.iso built.

My question is :

1. Is ovirt-wgt used for Windows guest?

2. If so, how can I build ovirt-guest-tools-iso package or 
ovirt-tools-setup.iso



Thanks,

Jingjie

//
//

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/OHCOXWEXIU6YFTRISAUIEJBHP5CSJCSV/

[ovirt-users] About Windows guest agent

[jingjie . jiang]

Hi,

I am new in oVirt and I'd like to get the clarification about the packages 
which support the function of Window guest agent from 4.2 release and how to 
build it.

I looked through the document from ovirt.org, such as

https://www.ovirt.org/documentation/internal/guest-agent/guest-agent-for-windows/

It mentioned:

"With the release of oVirt 3.5 we have introduced the oVirt WGT (Windows Guest 
Tools).

The oVirt WGT provides an ISO with all the tools and drivers one needs to 
install on a Windows VM, with an easy to use installer to install it all in one 
step.

So manual compilation and installation of oVirt Guest Agent is no longer 
necessary.

The oVirt WGT ISO is included in ovirt-guest-tools-iso-3.5-7.noarch.rpm 
package."

Now, ovirt-guest-tools-iso is up to 4.2.4. I found the src rpm from 
https://resources.ovirt.org/pub/ovirt-4.2/rpm/el7/SRPMS/ovirt-guest-tools-iso-4.2-4.el7.src.rpm,
 but I could not find ovirt-guest-tools-iso from github, only found ovirt-wgt.

After clone the ovirt-wgt, I got the SPICE-tools-0.141.iso built.

My question is :

1. Is ovirt-wgt used for Windows guest?

2. If so, how can I build ovirt-guest-tools-iso package or ovirt-tools-setup.iso


Thanks,

Jingjie

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WA4EPLXKFLYQHMKE3IC4XS7GBXWKL55T/