[ovirt-users] Re: Another illegal disk snapshot problem!
Hi We have the same issue as you, and we are also using vProtect. I have no solution, but I'm very interested in how to address this. Some VM:s we do have managed to remove the illegal snapshots after changing storage for the VM:s disks, but we have 3-4 VM:s that will not want to remove the illegal snapshot. As for us, this issue has escalated the last couple of months. Is it only us who have these issues or does people not take backup of their VM:s? Feels like more people should have these issues. //Magnus From: Joseph Goldman Sent: 08 December 2020 10:57 To: users@ovirt.org Subject: [ovirt-users] Another illegal disk snapshot problem! Hi List, oVirt 4.3 I know there have been threads about this before - but I am unable to find the exact scenario I am facing. I have a VM with 3 snapshots - Active, and 2 dated ones (technically created by vProtect) After trying to do a fresh snapshot in the GUI it failed out and marked one of the old snapshot disks as 'illegal' - then the other tried to follow suit. I tried 'unlocking' the entity using the unlock_entity.sh tool but any action reverts them back to illegal. Following previous advice - I can see the VDSM status is all showing LEGAL: image:23710238-07c2-46f3-96c0-9061fe1c3e0d - c3dadf14-bb4e-45a7-8bee-b9a01fe29ae1 status: OK, voltype: INTERNAL, format: RAW, legality: LEGAL, type: SPARSE, capacity: 107374182400, truesize: 18402942976 - a6d4533b-b0b0-475d-a436-26ce99a38d94 status: OK, voltype: INTERNAL, format: COW, legality: LEGAL, type: SPARSE, capacity: 107374182400, truesize: 21521768448 - 4b6f7ca1-b70d-4893-b473-d8d30138bb6b status: OK, voltype: LEAF, format: COW, legality: LEGAL, type: SPARSE, capacity: 107374182400, truesize: 12617457664 The 2 bold entries are the 'illegal' snapshots. Looking in the DB see's: select image_guid,parentid ,imagestatus ,vm_snapshot_id ,volume_type ,volume_format ,active from images where image_group_id='23710238-07c2-46f3-96c0-9061fe1c3e0d'; image_guid | parentid | imagestatus |vm_snapshot_id| volume_type | volume_format | active --+--+-+--+-+---+ 4b6f7ca1-b70d-4893-b473-d8d30138bb6b | a6d4533b-b0b0-475d-a436-26ce99a38d94 | 1 | d5044ae5-dc48-4700-9e46-d61e676c73fc | 2 | 4 | t c3dadf14-bb4e-45a7-8bee-b9a01fe29ae1 | ---- | 4 | 57337968-28da-4b03-ac40-134a347d8c11 | 2 | 5 | f a6d4533b-b0b0-475d-a436-26ce99a38d94 | c3dadf14-bb4e-45a7-8bee-b9a01fe29ae1 | 4 | d2d82724-9fe7-452c-a114-f8d70b20 | 2 | 4 | f So from here previous advice has been to do things such as delete the snapshot/disk etc but thats when they showed as illegal status. I also notice the Active Image is not the same image that has a parentid of all 0's so im not sure on the process of possibly deleting the other snapshots and disks cleanly and/or safely. Deleting or any tasks in the gui 100% fails and its at a point that if I shut down the (critical) VM it will not come back on because of these status'. On top of this what is a good way to take a clean, manual backup of current in use disk before I start playing with this in case worse comes to worse I have to try build it as a new server (As at this point I can't trust my vProtect backups) Any help appreciated. Thanks, Joe ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FFV2QW6Y46EKOHJXWVK7K3B3ECADOIJE/
[ovirt-users] Re: VM with illegal snapshots
Hello We have the same issue, and not just one VM, we have about 10-15 VMs that have either snapshots that are illegal or snapshots that is not possible to remove. This have been an issue for quite some time, all since beginning of 4.3 we get "vm with illegal snapshots" almost every week, and most often we can remove the snapshot and all is ok, but now this have escalated quite much and leaves us with customer VM that we may not be able to reboot or that the disk gets corrupted, that have happed a few times. [cid:2c902230-ccb6-4e63-98f6-ea667ba239bf] This is the VM with most snapshots that we are unable to remove any of them. Engine is on 4.3.10 and hosts on 4.3.9 How can i safely remove these snapshots? (I am not super comfortable around database "hacking" so some informative description would be much appreciated.) And how can we eliminate that these things happen? Cheers Magnus From: Alex K Sent: 10 November 2020 05:05 To: Giorgio Biacchi Cc: users Subject: [ovirt-users] Re: VM with illegal snapshots On Fri, Oct 9, 2020, 12:59 Giorgio Biacchi mailto:gior...@di.unimi.it>> wrote: Hi, due to a bug in our Ovirt integrated backup system now we have some VMs with snapshots in illegal state. It seems that there's an inconsistency between the db and the real status of images on disk. Let me show an example: engine=# select image_guid,parentid,imagestatus,vm_snapshot_id,volume_type,volume_format,active from images where image_group_id='e34f77cb-54d5-40d0-b539-e0a5fd512d2d'; image_guid | parentid | imagestatus |vm_snapshot_id| volume_type | volume_format | active --+--+-+--+-+---+ a107b6c4-842e-4b40-9215-c965431a0c0f | ---- | 4 | d19d6ca3-1989-4c67-8ee7-c0c43b3e6d74 | 2 | 4 | f a4c86a68-9123-454c-b417-1b15038a4bf2 | a107b6c4-842e-4b40-9215-c965431a0c0f | 1 | e7a405ee-8fd4-4733-ae9c-5252bf07c9d3 | 2 | 4 | f f6a61f2e-26bd-4b63-97c6-d66913ce48c5 | a4c86a68-9123-454c-b417-1b15038a4bf2 | 1 | 9d0958b9-4995-4e11-a027-a32d4bac52e4 | 2 | 4 | t (3 rows) [root@host02 ~]# lvs -o+lv_tags |grep e34f77cb-54d5-40d0-b539-e0a5fd512d2d a107b6c4-842e-4b40-9215-c965431a0c0f 459011cf-ebb6-46ff-831d-8ccfafd82c8a -wi--- 149.50g IU_e34f77cb-54d5-40d0-b539-e0a5fd512d2d,MD_68,PU_---- f6a61f2e-26bd-4b63-97c6-d66913ce48c5 459011cf-ebb6-46ff-831d-8ccfafd82c8a -wi--- 10.00g IU_e34f77cb-54d5-40d0-b539-e0a5fd512d2d,MD_348,PU_a107b6c4-842e-4b40-9215-c965431a0c0f so image guid a4c86a68-9123-454c-b417-1b15038a4bf2 is not present on disk, i think that the image was correctly merged but not removed from the database. Any suggestion on how to fix the database to reflect the real situation on disk?? In those cases I delete the entry from engine DB to reflect the status of the image chain. TIA -- gb PGP Key: http://pgp.mit.edu/ Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34 ___ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OF4NTAC6BPGRP4YJZRWBXQCNBWLERL72/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FRAXF7POUODBM4AJ5BFC3TEK4Z323QEG/
[ovirt-users] Re: Help remove snapshot
Thank you for all help, that did the trick. Cheers Magnus From: Eli Mesika Sent: 19 August 2020 19:37 To: Shani Leviim Cc: Magnus Isaksson ; users Subject: Re: [ovirt-users] Re: Help remove snapshot On Mon, Aug 17, 2020 at 2:48 PM Shani Leviim mailto:slev...@redhat.com>> wrote: Hi Magnus, Sounds like you triggered this one https://bugzilla.redhat.com/show_bug.cgi?id=1555116. The error message you've got was meant to avoid removing a snapshot from a broken chain. On the Active VM snapshot -> Disks, is there any disk with Illegal status? Deleting the whole snapshot can be done from the DB: delete from snapshots where snapshot_id = '.'; please avoid deleting stuff from DB directly , you should use teh right SP for doing the job since in many time database consistency is handled by the SP code and doing it directly will leave inconsistent data which may cause problems on this case you should use : SELECT DeleteSnapshot(<'snapshot-id'>); Although it's recommended to understand the root cause for that one. Can you please share your engine.log? Regards, Shani Leviim On Mon, Aug 17, 2020 at 1:37 PM Magnus Isaksson mailto:mag...@vmar.se>> wrote: Hi! I would need some help removing a snapshot that looks like this. How do i remove it manually or fix snapshot definition? - Error while executing action: TUN_SALDC01: * The requested snapshot has an invalid parent, either fix the snapshot definition or remove it manually to complete the process. - And when i look at the disk on tha tnapshot it show as this: [cid:173fc1ab77ba1f1f0b11] And general info: [cid:173fc1ab77ca20008322] ___ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5QEBPZPUHDGS52266D4OLVX54CUEWEOB/ ___ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QRNHSLEZXM27GABD43IJ7DHUYZ4EJJIY/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ERZAEEPYKGLU3QRUDSKVXZ26GF22U4WM/
[ovirt-users] Help remove snapshot
Hi! I would need some help removing a snapshot that looks like this. How do i remove it manually or fix snapshot definition? - Error while executing action: TUN_SALDC01: * The requested snapshot has an invalid parent, either fix the snapshot definition or remove it manually to complete the process. - And when i look at the disk on tha tnapshot it show as this: [cid:98462a7f-dbb6-447e-925a-5b170883d7c7] And general info: [cid:9264e2e0-459f-4b54-aba7-08b3bf1f4068] ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5QEBPZPUHDGS52266D4OLVX54CUEWEOB/
[ovirt-users] Re: Slow disk upload via WebGUI
Hi >From what i can tell from that link is that there is only one way for my >scenario, or have i missed something? "Procedure 11.8. Uploading a Disk Image to a Storage Domain" //Magnus From: Strahil Nikolov Sent: 06 June 2020 12:26 To: users@ovirt.org ; Magnus Isaksson Subject: Re: [ovirt-users] Re: Slow disk upload via WebGUI Hi Magnus, there are several ways to upload a disk. For details, check https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/html/administration_guide/sect-Virtual_Disk_Tasks#Uploading_a_Disk_Image_to_a_Storage_Domain Best Regards, Strahil Nikolov На 6 юни 2020 г. 12:15:36 GMT+03:00, Magnus Isaksson написа: >A note to this is that we are migrating a couple of customers from a >vmware enviroment that we have no control over, we get the vmdk files >on a NFS share. its a bit over 130 VM:s and if every disk will go at >100mbit/s its quite a painful process. > >Is there a faster way to import these disk images other then via >WebGUI? (of course after convert) > >//Magnus > >From: Magnus Isaksson >Sent: 06 June 2020 10:58 >To: users >Subject: [ovirt-users] Slow disk upload via WebGUI > >Hello > >I'm running Engine 4.3.9 and have fibre channel SSD storage and 4 >nodes. > >When uploading disk images i get around 100mbit/s per disk, if im >running 3 uploads at the same time i get about 300mbit/s combined. >Everything is connected via 10G and 16G to FC storage. > >Why is it so slow? and what can i do to speed things up? > >Regards > Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BHMHQ34EZ3IFD7IS4KK3WRUN64Y4SCW5/
[ovirt-users] Re: Slow disk upload via WebGUI
A note to this is that we are migrating a couple of customers from a vmware enviroment that we have no control over, we get the vmdk files on a NFS share. its a bit over 130 VM:s and if every disk will go at 100mbit/s its quite a painful process. Is there a faster way to import these disk images other then via WebGUI? (of course after convert) //Magnus From: Magnus Isaksson Sent: 06 June 2020 10:58 To: users Subject: [ovirt-users] Slow disk upload via WebGUI Hello I'm running Engine 4.3.9 and have fibre channel SSD storage and 4 nodes. When uploading disk images i get around 100mbit/s per disk, if im running 3 uploads at the same time i get about 300mbit/s combined. Everything is connected via 10G and 16G to FC storage. Why is it so slow? and what can i do to speed things up? Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EZ3DWHJ54BUCYTUNONQJBUTZECC7C3VD/
[ovirt-users] Slow disk upload via WebGUI
Hello I'm running Engine 4.3.9 and have fibre channel SSD storage and 4 nodes. When uploading disk images i get around 100mbit/s per disk, if im running 3 uploads at the same time i get about 300mbit/s combined. Everything is connected via 10G and 16G to FC storage. Why is it so slow? and what can i do to speed things up? Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/THCV7L4Q72OE5DDFNC54F5DMCQ2QW6RG/
[ovirt-users] Migrate running hosts to new Engine
Hello all, I need to migrate 4 hosts running CentOS with oVirt 4.2 to a new Engine that runs 4.3 and not disrupt the VMs on these hosts? The VMs need to be running, i have a slim option of downtime for them, but rather not. The reason is that my current engine 4.2 will not upgrade to 4.3, tried so many times, but all i get is a white page after the upgrade, according to engine-setup, was a success. So, how can i do this? Reagrds Magnus Isaksson ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7WLV5VF6BPDIO2LLL3L4YMIDUJZK6WEC/
[ovirt-users] Re: Dropped RX Packets
Hello @strahil The packet drops are frequent, every time i run "ip -s link" on the guest there is new dropped packets, on the hosts it says "0" and in oVirt it says "0". I can run tcpdump on hosts and guests, but i don't know how to capture the dropped packets with tcpdump. There are no RX or TX errors anywhere, not on hosts, guests or switches. The connection drops are completely random, sometimes after a few minutes and sometimes after a couple of hours, really hard to narrow down, but this may be some errors in our customers network, they are investigating it now, so i will come back with that issue is it still persists. @Oliver I tried this, unfortunately still same result, still dropping packets. @Darell I tried increasing the RX and TX buffer on the hosts, but the guests still drop packets. I am using dual 10G, setup in Active-Backup going to two switches, but the second switch is now turned off during the testing to narrow this down. Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TISY75JZ34AJAVV3B233WLCJ5PFBZRRL/
[ovirt-users] Dropped RX Packets
Hello all! I'm having quite some trouble with VMs that have a large amount of dropped packets on RX. This, plus customers complain about short dropped connections, for example one customer has a SQL server and an other serevr connecting to it, and it is randomly dropping connections. Before they moved their VM:s to us they did not have any of these issues. Does anyone have an idea of what this can be due to? And how can i fix it? It is starting to be a deal breaker for our customers on whether they will stay with us or not. I was thinking of reinstalling the nodes with oVirt Node, instead of the full CentOS, would this perhaps fix the issue? The enviroment is: Huawei x6000 with 4 nodes Each node having Intel X722 network card and connecting with 10G (fiber) to a Juniper EX 4600. Storage via FC to a IBM FS900. Each node is running a full CentOS 7.6 connecting to a Engine 4.2.8.2 Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QXGQSKYBUCFPDCBIQVAAZAWFQX54A2BD/
[ovirt-users] Upgrade engine to 4.3.3 or setup a new engine
Hello all I'm having trouble upgrading my engine to 4.3.3 from 4.2.8 The upgrade goes well, no errors but webgui wont load, it just says "waiting for engine" I have tried to set up a new machine with engine and import the DB from the old(after upgrade) still the same problem. So after quite a few tries i gave up and set up a fresh new engine 4.3.3 But can i move/migrate the hosts with running VM:s in to the new engine? In vmware vcenter it is just to add the host and all VM:s and stuff comes over, but im guessing from what ive read that it is not that simple with ovirt. Or how should i solve this? //Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XEPQMW5R4JG5SZHX2DO2MC7LSO74BZAH/
[ovirt-users] Re: 4.3.3 restore fails
Hello, Thanks for taking the time, In the meantime I did a new installation on a new machine and imported the old storage domain and then imported the vm's so I am back that way. More downtime than I would have liked but hey it is my home environment that I treat like almost like an enterprise environment since I am a geek. :) I checked the old machine now and noticed it has a lot of errors. Didn't notice the kernel sense errors about the device before only that I would get strange problems in the engine which I know think is related to the disk errors. Best Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OZNI5SBW4PFC2KEI5BBAFQ7HRONLWRLI/
[ovirt-users] 4.3.3 restore fails
-04-27 02:18:00 32343: pg_cmd running: psql -w -U engine -h localhost -p 5432 engine -c select 1 ?column? -- 1 (1 row) 2019-04-27 02:18:00 32343: pg_cmd running: psql -w -U engine -h localhost -p 5432 engine -t -c show lc_messages 2019-04-27 02:18:00 32343: pg_cmd running: pg_dump -w -U engine -h localhost -p 5432 engine -s 2019-04-27 02:18:01 32343: pg_cmd running: psql -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -c select 1 ?column? -- 1 (1 row) 2019-04-27 02:18:01 32343: pg_cmd running: psql -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -t -c show lc_messages 2019-04-27 02:18:01 32343: pg_cmd running: pg_dump -w -U ovirt_engine_history -h localhost -p 5432 ovirt_engine_history -s 2019-04-27 02:18:01 32343: OUTPUT: - Engine database 'engine' 2019-04-27 02:18:01 32343: Restoring engine database backup at /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db 2019-04-27 02:18:01 32343: restoreDB: backupfile /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db user engine host localhost port 5432 database engine orig_user compressor format custom jobsnum 2 2019-04-27 02:18:01 32343: pg_cmd running: pg_restore -w -U engine -h localhost -p 5432 -d engine -j 2 /tmp/engine-backup.NVv4Bxjb2k/db/engine_backup.db pg_restore: [archiver (db)] Error while PROCESSING TOC: pg_restore: [archiver (db)] Error from TOC entry 7624; 0 0 COMMENT EXTENSION plpgsql pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension plpgsql Command was: COMMENT ON EXTENSION plpgsql IS 'PL/pgSQL procedural language'; pg_restore: [archiver (db)] Error from TOC entry 7625; 0 0 COMMENT EXTENSION "uuid-ossp" pg_restore: [archiver (db)] could not execute query: ERROR: must be owner of extension uuid-ossp Command was: COMMENT ON EXTENSION "uuid-ossp" IS 'generate universally unique identifiers (UUIDs)'; pg_restore: [archiver (db)] Error from TOC entry 6400; 2606 18298 CONSTRAINT external_variable pk_external_variable engine pg_restore: [archiver (db)] could not execute query: ERROR: could not create unique index "pk_external_variable" DETAIL: Key (var_name)=(fence-kdump-listener-heartbeat) is duplicated. Command was: ALTER TABLE ONLY public.external_variable ADD CONSTRAINT pk_external_variable PRIMARY KEY (var_name); WARNING: errors ignored on restore: 4 2019-04-27 02:18:43 32343: Non-ignored-errors in pg_restore log: pg_restore: [archiver (db)] could not execute query: ERROR: could not create unique index "pk_external_variable" 2019-04-27 02:18:43 32343: FATAL: Errors while restoring database engine If this is a problem while restoring a 4.3.0 backup to a 4.3.3 engine is it possible to install the 4.3.0 version? Following the installation part of the release notes of 4.3.0 will result in 4.3.3 being installed. Best Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JVMSZIT3HMBERA47D4DIAFKTZYXZN6GE/
[ovirt-users] Gluster suggestions
Hello I would like some suggestions on what type of solution with Gluster i should use. I have 4 hosts with 3 disks each, i want to user as much space as possible but also some redundancy, like raid5 or 6 The 4 hosts are running oVirt on CentOS 7 I have 2 clusters due to some licensing issues, so i cant use ovirts setup of gluster Today i have set it up as follows Type: Disperse Number of Bricks: 1 x (8 + 4) = 12 So i have 3 bricks per host (one brick per disk) But this setup is not working very well, as soon as i get some traffic on the volume this start to fail on the ovirt nodes, loosing connection etc. All hosts are connected via 10G interface So any suggestions on how i would set this up as best is much appreciated. Regards Magnus Isaksson ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7R2FLPNTC7PYZQHSHDRU6CX6VYAWONRI/
[ovirt-users] Re: Gluster suggestions
I have 2 hosts per cluster, and i have 2 clusters, 4 hosts (its an Huawei x6000) I know oVirt don't support disperse, that's why i run gluster outside of oVirt. And doing that i get a bit more freedom with setting up gluster. So what would be an good setup to be able to use as much space as possible and some redundancy with the 4 hosts i have? //Magnus From: Sahina Bose Sent: 16 April 2019 10:55 To: Magnus Isaksson Cc: users Subject: Re: [ovirt-users] Gluster suggestions On Tue, Apr 16, 2019 at 1:42 PM wrote: > > Hello > > I would like some suggestions on what type of solution with Gluster i should > use. > > I have 4 hosts with 3 disks each, i want to user as much space as possible > but also some redundancy, like raid5 or 6 > The 4 hosts are running oVirt on CentOS 7 > I have 2 clusters due to some licensing issues, so i cant use ovirts setup of > gluster I did not quite get this - are you saying you can have only 2 nodes in one cluster? > > Today i have set it up as follows > Type: Disperse > Number of Bricks: 1 x (8 + 4) = 12 Disperse volumes are not supported with oVirt. It's either replica 3 or replica 2 + arbiter. > > So i have 3 bricks per host (one brick per disk) > > But this setup is not working very well, as soon as i get some traffic on the > volume this start to fail on the ovirt nodes, loosing connection etc. > > All hosts are connected via 10G interface > > So any suggestions on how i would set this up as best is much appreciated. > > Regards > Magnus Isaksson > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/AIEPMRANHFB7J2FH6IHTFJ2GUXVB37ZP/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/N7EUPE3USUTDDEAM5CGMJ3N44KXWLH7Y/
[ovirt-users] Re: Gluster suggestions
Its for storage of VM disks, not OS but like filestorage. I have done a similar setup with distributed replicated arbiter volumes, but i loose so much storage space. Each disk is 6TB, in a raid 5 it would be 66TB, with dispersed ~45TB, with D-R-A it was around 28TB, quite a massive loss. It was an replicated 3 arbiter 1 setup. When i did this i used LVM and set Arbiter volume as a smaller disk, think it was 2TB Like this: H| 12 3 4 - 1| D1 D1 A1 D4 2| D4 D2 D2 A2 3| A3 A4 D3 D3 Followed this: https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.4/html/administration_guide/creating_arbitrated_replicated_volumes - Example 5.10. Example of a chained configuration ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KRVHVYV7DNC7UWGS6E7AY4CYTQLAY27A/
[ovirt-users] Re: Gluster suggestions
I have 2 hosts per cluster, and i have 2 clusters, 4 hosts (its an Huawei x6000) I know oVirt don't support disperse, that's why i run gluster outside of oVirt. And doing that i get a bit more freedom with setting up gluster. So what would be an good setup to be able to use as much space as possible and some redundancy with the 4 hosts i have? //Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3RAOXWGNLB3TVTPB237RKPM4EPXN5VZD/
[ovirt-users] Gluster suggestions
Hello I would like some suggestions on what type of solution with Gluster i should use. I have 4 hosts with 3 disks each, i want to user as much space as possible but also some redundancy, like raid5 or 6 The 4 hosts are running oVirt on CentOS 7 I have 2 clusters due to some licensing issues, so i cant use ovirts setup of gluster Today i have set it up as follows Type: Disperse Number of Bricks: 1 x (8 + 4) = 12 So i have 3 bricks per host (one brick per disk) But this setup is not working very well, as soon as i get some traffic on the volume this start to fail on the ovirt nodes, loosing connection etc. All hosts are connected via 10G interface So any suggestions on how i would set this up as best is much appreciated. Regards Magnus Isaksson ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AIEPMRANHFB7J2FH6IHTFJ2GUXVB37ZP/
[ovirt-users] GlusterFS and oVirt
Hello I have quite some trouble getting Gluster to work. I have 4 nodes running CentOS and oVirt. These 4 nodes is split up in 2 clusters. I do not run Gluster via oVirt, i run it stand alone to be able to use all 4 nodes into one gluster volume. I can add all peers successfully, and i can create an volume and start it with sucess, but after that it starts to getting troublesome. If i run gluster volume status after starting the volume it times out, i have read that ping-time needs to bee more than 0 so i set it on 30, Still the same problem. >From now on, i can not stop a volume nor remove it, i have to stop glusterd >and remove it from /var/lib/gluster/vols/* on all nodes to be able to do >anything with gluster. >From time to time when i do a gluster peer status it shows "disconnected" and >when i run it again directly after it show "connected" I get a lot of these errors in glusterd.log [2019-01-20 12:53:46.087848] W [rpc-clnt-ping.c:223:rpc_clnt_ping_cbk] 0-management: socket disconnected [2019-01-20 12:53:46.087858] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:55.091598] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:56.094846] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed [2019-01-20 12:53:56.097482] W [rpc-clnt-ping.c:246:rpc_clnt_ping_cbk] 0-management: RPC_CLNT_PING notify failed What am i doing wrong? //Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6XHSOBCDZ6AG4AVC4MLQNRJUJ2NKYTI2/
[ovirt-users] oVirt guest agent on OpenSUSE 42.3 Leap
Hi all I have some trouble with guest agent for OpenSUSE 42.3 Leap, short version, it don’t start. I have followed instructions that I could find about this error, but all I could find was for Debian 8 (http://lists.ovirt.org/pipermail/users/2018-January/086102.html) Still same problem. Anyone who can help me get this right? # cat /etc/os-release NAME="openSUSE Leap" VERSION="42.3" # systemctl status ovirt-guest-agent ● ovirt-guest-agent.service - oVirt Guest Agent Loaded: loaded (/usr/lib/systemd/system/ovirt-guest-agent.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Mon 2018-05-07 17:25:40 CEST; 17h ago Process: 1167 ExecStart=/usr/bin/python /usr/share/ovirt-guest-agent/ovirt-guest-agent.py (code=exited, status=1/FAILURE) Process: 1156 ExecStartPre=/bin/chown ovirtagent:ovirtagent /run/ovirt-guest-agent.pid (code=exited, status=0/SUCCESS) Process: 1141 ExecStartPre=/bin/touch /run/ovirt-guest-agent.pid (code=exited, status=0/SUCCESS) Process: 1132 ExecStartPre=/sbin/modprobe virtio_console (code=exited, status=0/SUCCESS) Main PID: 1167 (code=exited, status=1/FAILURE) May 07 17:25:39 seweb03 systemd[1]: Starting oVirt Guest Agent... May 07 17:25:39 seweb03 systemd[1]: Started oVirt Guest Agent. May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Main process exited, code=exited, status=1/FAILURE May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Unit entered failed state. May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Failed with result 'exit-code'. -- >From /var/log/ovirt-guest-agent/ovirt-guest-agent.log MainThread::INFO::2018-05-08 10:47:48,782::ovirt-guest-agent::59::root::Starting oVirt guest agent MainThread::ERROR::2018-05-08 10:47:48,783::ovirt-guest-agent::140::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 134, in agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 65, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 466, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 188, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 151, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 132, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 13] Permission denied: '/dev/virtio-ports/ovirt-guest-agent.0' - # zypper info ovirt-guest-agent-common Loading repository data... Reading installed packages... Information for package ovirt-guest-agent-common: - Repository : openSUSE-Leap-42.3-0 Name : ovirt-guest-agent-common Version: 1.0.12-3.1 Arch : noarch Vendor : openSUSE Installed Size : 140.0 KiB Installed : Yes Status : up-to-date Source package : ovirt-guest-agent-1.0.12-3.1.src Summary: Commonly used files of the oVirt Guest Agent Description: This is the oVirt management agent running inside the guest. The agent interfaces with the oVirt manager, supplying heart-beat info as well as run-time data from within the guest itself. The agent also accepts control commands to be run executed within the OS (like: shutdown and restart). - # zypper lr Repository priorities are without effect. All enabled repositories share the same priority. # | Alias | Name| Enabled | GPG Check | Refresh ---+---+-+-+---+ 1 | Virtualization_oVirt | oVirt (openSUSE_Leap_42.3) | Yes | (r ) Yes | No Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: oVirt guest agent on OpenSUSE 42.3 Leap
NVM, Fixed it. * Changed to a more resent repo (https://software.opensuse.org/download.html?project=Virtualization=ovirt-guest-agent) * Uninstalled and removed all files regarding ovirt agent * Rebooted the machine * Not sure if this was nessesary, but uncommented “device_prefix = /dev/virtio-ports/” in /etc/ovirt-guest-agent.conf * Run: udevadm trigger --subsystem-match="virtio-ports" * (re)start service * Works! //Magnus From: Magnus Isaksson Sent: den 8 maj 2018 10:59 To: users@ovirt.org Subject: oVirt guest agent on OpenSUSE 42.3 Leap Hi all I have some trouble with guest agent for OpenSUSE 42.3 Leap, short version, it don’t start. I have followed instructions that I could find about this error, but all I could find was for Debian 8 (http://lists.ovirt.org/pipermail/users/2018-January/086102.html) Still same problem. Anyone who can help me get this right? # cat /etc/os-release NAME="openSUSE Leap" VERSION="42.3" # systemctl status ovirt-guest-agent ● ovirt-guest-agent.service - oVirt Guest Agent Loaded: loaded (/usr/lib/systemd/system/ovirt-guest-agent.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Mon 2018-05-07 17:25:40 CEST; 17h ago Process: 1167 ExecStart=/usr/bin/python /usr/share/ovirt-guest-agent/ovirt-guest-agent.py (code=exited, status=1/FAILURE) Process: 1156 ExecStartPre=/bin/chown ovirtagent:ovirtagent /run/ovirt-guest-agent.pid (code=exited, status=0/SUCCESS) Process: 1141 ExecStartPre=/bin/touch /run/ovirt-guest-agent.pid (code=exited, status=0/SUCCESS) Process: 1132 ExecStartPre=/sbin/modprobe virtio_console (code=exited, status=0/SUCCESS) Main PID: 1167 (code=exited, status=1/FAILURE) May 07 17:25:39 seweb03 systemd[1]: Starting oVirt Guest Agent... May 07 17:25:39 seweb03 systemd[1]: Started oVirt Guest Agent. May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Main process exited, code=exited, status=1/FAILURE May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Unit entered failed state. May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Failed with result 'exit-code'. -- From /var/log/ovirt-guest-agent/ovirt-guest-agent.log MainThread::INFO::2018-05-08 10:47:48,782::ovirt-guest-agent::59::root::Starting oVirt guest agent MainThread::ERROR::2018-05-08 10:47:48,783::ovirt-guest-agent::140::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 134, in agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 65, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 466, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 188, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 151, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 132, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 13] Permission denied: '/dev/virtio-ports/ovirt-guest-agent.0' - # zypper info ovirt-guest-agent-common Loading repository data... Reading installed packages... Information for package ovirt-guest-agent-common: - Repository : openSUSE-Leap-42.3-0 Name : ovirt-guest-agent-common Version: 1.0.12-3.1 Arch : noarch Vendor : openSUSE Installed Size : 140.0 KiB Installed : Yes Status : up-to-date Source package : ovirt-guest-agent-1.0.12-3.1.src Summary: Commonly used files of the oVirt Guest Agent Description: This is the oVirt management agent running inside the guest. The agent interfaces with the oVirt manager, supplying heart-beat info as well as run-time data from within the guest itself. The agent also accepts control commands to be run executed within the OS (like: shutdown and restart). - # zypper lr Repository priorities are without effect. All enabled repositories share the same priority. # | Alias | Name| Enabled | GPG Check | Refresh ---+---+-+-+---+ 1 | Virtualization_oVirt | oVirt (openSUSE_Leap_42.3) | Yes | (r ) Yes | No Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Mikrotik CHR guest agent
Hello all I have installed MikroTik Cloud Hosted Router on my oVirt 4.2 setup It starts fine and so but oVirt complains about guest-agent. At MikroTik this information is available regarding guest-agent https://wiki.mikrotik.com/wiki/Manual:CHR#KVM But I don't understand what I shall do with that information to get it working. Can somebody help me? Regards Magnus ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
Re: [ovirt-users] oVirt node and NFS
Hi Shani, I am currently using NFS shares on this oVirt node 4.1.6 host without problem, i only have one host at the moment so it is setup with self-hosted-engine. But it is when I want to access these NFS shares from another host/client that I cannot connect. So when I run “Iptables -L” I can see that the NFS port are not open. # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:54321 ACCEPT tcp -- anywhere anywhere tcp dpt:54322 ACCEPT tcp -- anywhere anywhere tcp dpt:sunrpc ACCEPT udp -- anywhere anywhere udp dpt:sunrpc ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT udp -- anywhere anywhere udp dpt:snmp ACCEPT tcp -- anywhere anywhere tcp dpt:websm ACCEPT tcp -- anywhere anywhere tcp dpt:16514 ACCEPT tcp -- anywhere anywhere multiport dports rockwell-csp2 ACCEPT tcp -- anywhere anywhere multiport dports rfb:6923 ACCEPT tcp -- anywhere anywhere multiport dports 49152:49216 ACCEPT udp -- anywhere anywhere udp dpt:6081 REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:6081 My first thought was to check with firewalld, but that is not running, so how are these iptables rules set? And how do I add an opening for NFS? I have checked that troubleshooting guide but it have no info about this. Regards Magnus Isaksson From: Shani Leviim [mailto:slev...@redhat.com] Sent: den 21 november 2017 17:39 To: Magnus Isaksson <mag...@vmar.se> Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt node and NFS Hi Mangnus, Have you tried the troubleshooting-nfs-storage-issues page? https://www.ovirt.org/documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/ Regards, Shani Leviim On Tue, Nov 21, 2017 at 12:26 PM, Magnus Isaksson <mag...@vmar.se<mailto:mag...@vmar.se>> wrote: Anyone? //Magnus From: Magnus Isaksson Sent: den 20 november 2017 16:01 To: 'users@ovirt.org<mailto:users@ovirt.org>' <users@ovirt.org<mailto:users@ovirt.org>> Subject: oVirt node and NFS Hi, This is probably an easy thing, but I can’t seem to find the solution. On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach, but I noticed that the firewall is not open for that on the host. So, how to I configure the Nodes firewall? Regards Magnus Isaksson ___ Users mailing list Users@ovirt.org<mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt node and NFS
Hi, This is probably an easy thing, but I can't seem to find the solution. On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach, but I noticed that the firewall is not open for that on the host. So, how to I configure the Nodes firewall? Regards Magnus Isaksson ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt node and NFS
Anyone? //Magnus From: Magnus Isaksson Sent: den 20 november 2017 16:01 To: 'users@ovirt.org' <users@ovirt.org> Subject: oVirt node and NFS Hi, This is probably an easy thing, but I can't seem to find the solution. On my oVirt node 4.1 I have some NFS shares that I want other hosts to reach, but I noticed that the firewall is not open for that on the host. So, how to I configure the Nodes firewall? Regards Magnus Isaksson ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failed to open grubx64.efi
Hello I got the same thing. Tho, this post at comment 6 worked perfekt. https://bugzilla.redhat.com/show_bug.cgi?id=1496762 //Magnus On 16 November 2017 23:12:26 CET, Luca 'remix_tj' Lorenzetto <lorenzetto.l...@gmail.com> wrote: >Il 16 nov 2017 9:36 PM, "Julio Cesar Bustamante" < >julio.cesar.bustama...@gmail.com> ha scritto: > >Hi Luca. > >But do you have installed Ovirt without UEFI in production >environments?. > >UEFI , is it necessary in production environments?. > >Hi Julio, > >No, at all. We have a setup of 7 nodes hp bl460 gen9 in legacy mode >working >like a charm. > >Luca -- Sent from my Android device with K-9 Mail. Please excuse my brevity.___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] LDAP sources
Hello, I have tried googling and searching in the documentation, but i can't seem to find any instructions on how to remove a authentication source. The background is that i did set up an FreeIPA server for auth, worked perfectly, but i ran into some problems using that to auth other systems, so i had to setup a new FreeIPA server and added that to oVirt, but now i want to remove the old one, but can not seem to find how. Anyone sitting on that info? And while on the subject, how do i set the FreeIPA auth as default auth source in oVirt? Regards Magnus ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] VLAN trunk
Hello, In VMware you create a vlan and for tag you choose "all" or 4095. What is the equivalent in oVirt? I am setting up a pfSense firewall and i dont want to create a new NIC for every VLAN i want in the firewall, so in VMware im creating 3 nics, WAN, VGT and HA Sync, with that i can add as many internal VLAN i want. Cheers Magnus ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] NIC Bonding
Hello! I'm new(-ish) to oVirt and have a question regarding network. I currently use vmware, the hosts have 4 nic each and connected to two switches in stack(extreme), i have two vSwitch with two nic each setup in active/standby, with this i don't have to do anything with the physical switch. So how do i do this setup on oVirt so i don't need to configure the switches? I know how to bond the cards, but i am afraid of a switchloop, so i just want to make sure that does not happen. Regards Magnus Isaksson ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users