Re: [Users] trouble with pci passthrough
On 01/11/2013 02:09 PM, Andreas Huser wrote: I launch the vm with ovirt and attach (if started) the pci device with virsh attach-device w2k3-server parport. this procedure works fine befor ovirt installation. I think a better way to attach the pci device in ovirt would be via a custom vdsm hook and a custom property on the vm, then via virsh. I'm assuming that in order to use virsh you had to use the password vdsm set to libvirt? sorry for my bad english :-) *Von: *"Itamar Heim" *An: *"Andreas Huser" *CC: *"Shu Ming" , users@ovirt.org *Gesendet: *Freitag, 11. Januar 2013 11:36:04 *Betreff: *Re: [Users] trouble with pci passthrough On 01/11/2013 10:46 AM, Andreas Huser wrote: > Hi Shu, > > it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + libvirtd + virt-manager. > Then i have no Problems. I can assign the pci devicre with virt-manager or virsh and the PCI Device works perfect. > > But when i install on top on this Centos Server oVirt. The pci passthrough works not more cleanly. > I see the Device on the destination Server (Windows Server 2003) but the divice have an error message. "device cannot be start (code 10)" > I tasting this installation with Centos6.3, Oralce Linux 6.3, Fedora 17 and Fedora 18. so you just installed oVirt engine and the guest which you are launching without ovirt stops using the pci, or are you actually launching the guest with ovirt? > > regards > Andreas > > > - Ursprüngliche Mail - > > Von: "Shu Ming" > An: "ahuser" > CC: ih...@redhat.com, users@ovirt.org > Gesendet: Donnerstag, 10. Januar 2013 02:35:37 > Betreff: Re: [Users] trouble with pci passthrough > > > 2013-1-10 8:42, ahuser: > > > > Hi Itamar, > > > Thanks for your reply. > I tried and ro this with virsh + xml file and virt-manager. > > > I suppose you assigned the device to the virtual server successfully with virsh and virt-manager. > > > > > > > Confusing is that after the installation oVirt the device is not passed cleanly. > > > Do you mean the old virtual server which was created before oVirt installation was finally managed by oVirt? Or oVirt didn't manage this virtual server but the PCI device assigned to the virtual server disappeared? > > > > > > > > > > > > Von Samsung-Tablet gesendet > Itamar Heim hat geschrieben: > > > ___ > Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
I launch the vm with ovirt and attach (if started) the pci device with virsh attach-device w2k3-server parport. this procedure works fine befor ovirt installation. sorry for my bad english :-) - Ursprüngliche Mail - Von: "Itamar Heim" An: "Andreas Huser" CC: "Shu Ming" , users@ovirt.org Gesendet: Freitag, 11. Januar 2013 11:36:04 Betreff: Re: [Users] trouble with pci passthrough On 01/11/2013 10:46 AM, Andreas Huser wrote: > Hi Shu, > > it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + > libvirtd + virt-manager. > Then i have no Problems. I can assign the pci devicre with virt-manager or > virsh and the PCI Device works perfect. > > But when i install on top on this Centos Server oVirt. The pci passthrough > works not more cleanly. > I see the Device on the destination Server (Windows Server 2003) but the > divice have an error message. "device cannot be start (code 10)" > I tasting this installation with Centos6.3, Oralce Linux 6.3, Fedora 17 and > Fedora 18. so you just installed oVirt engine and the guest which you are launching without ovirt stops using the pci, or are you actually launching the guest with ovirt? > > regards > Andreas > > > - Ursprüngliche Mail - > > Von: "Shu Ming" > An: "ahuser" > CC: ih...@redhat.com, users@ovirt.org > Gesendet: Donnerstag, 10. Januar 2013 02:35:37 > Betreff: Re: [Users] trouble with pci passthrough > > > 2013-1-10 8:42, ahuser: > > > > Hi Itamar, > > > Thanks for your reply. > I tried and ro this with virsh + xml file and virt-manager. > > > I suppose you assigned the device to the virtual server successfully with > virsh and virt-manager. > > > > > > > Confusing is that after the installation oVirt the device is not passed > cleanly. > > > Do you mean the old virtual server which was created before oVirt > installation was finally managed by oVirt? Or oVirt didn't manage this > virtual server but the PCI device assigned to the virtual server disappeared? > > > > > > > > > > > > Von Samsung-Tablet gesendet > Itamar Heim hat geschrieben: > > > ___ > Users mailing list Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
On 01/11/2013 10:46 AM, Andreas Huser wrote: Hi Shu, it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + libvirtd + virt-manager. Then i have no Problems. I can assign the pci device with virt-manager or virsh and the PCI Device works perfect. But when i install on top on this Centos Server oVirt. The pci passthrough works not more cleanly. I see the Device on the destination Server (Windows Server 2003) but the divice have an error message. "device cannot be start (code 10)" I tasting this installation with Centos6.3, Oralce Linux 6.3, Fedora 17 and Fedora 18. so you just installed oVirt engine and the guest which you are launching without ovirt stops using the pci, or are you actually launching the guest with ovirt? regards Andreas - Ursprüngliche Mail - Von: "Shu Ming" An: "ahuser" CC: ih...@redhat.com, users@ovirt.org Gesendet: Donnerstag, 10. Januar 2013 02:35:37 Betreff: Re: [Users] trouble with pci passthrough 2013-1-10 8:42, ahuser: Hi Itamar, Thanks for your reply. I tried and ro this with virsh + xml file and virt-manager. I suppose you assigned the device to the virtual server successfully with virsh and virt-manager. Confusing is that after the installation oVirt the device is not passed cleanly. Do you mean the old virtual server which was created before oVirt installation was finally managed by oVirt? Or oVirt didn't manage this virtual server but the PCI device assigned to the virtual server disappeared? Von Samsung-Tablet gesendet Itamar Heim hat geschrieben: ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
Hi Shu, it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + libvirtd + virt-manager. Then i have no Problems. I can assign the pci device with virt-manager or virsh and the PCI Device works perfect. But when i install on top on this Centos Server oVirt. The pci passthrough works not more cleanly. I see the Device on the destination Server (Windows Server 2003) but the divice have an error message. "device cannot be start (code 10)" I tasting this installation with Centos6.3, Oralce Linux 6.3, Fedora 17 and Fedora 18. regards Andreas - Ursprüngliche Mail - Von: "Shu Ming" An: "ahuser" CC: ih...@redhat.com, users@ovirt.org Gesendet: Donnerstag, 10. Januar 2013 02:35:37 Betreff: Re: [Users] trouble with pci passthrough 2013-1-10 8:42, ahuser: Hi Itamar, Thanks for your reply. I tried and ro this with virsh + xml file and virt-manager. I suppose you assigned the device to the virtual server successfully with virsh and virt-manager. Confusing is that after the installation oVirt the device is not passed cleanly. Do you mean the old virtual server which was created before oVirt installation was finally managed by oVirt? Or oVirt didn't manage this virtual server but the PCI device assigned to the virtual server disappeared? Von Samsung-Tablet gesendet Itamar Heim hat geschrieben: ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
2013-1-10 8:42, ahuser: Hi Itamar, Thanks for your reply. I tried and ro this with virsh + xml file and virt-manager. I suppose you assigned the device to the virtual server successfully with virsh and virt-manager. Confusing is that after the installation oVirt the device is not passed cleanly. Do you mean the old virtual server which was created before oVirt installation was finally managed by oVirt? Or oVirt didn't manage this virtual server but the PCI device assigned to the virtual server disappeared? Von Samsung-Tablet gesendet Itamar Heim hat geschrieben: ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- --- ?? Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shum...@cn.ibm.com or shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
Hi Itamar, Thanks for your reply. I tried and ro this with virsh + xml file and virt-manager. Confusing is that after the installation oVirt the device is not passed cleanly. Von Samsung-Tablet gesendetItamar Heim hat geschrieben:On 01/06/2013 12:59 AM, Andreas Huser wrote: > hi everybody > > i have trouble with pci passthrough of a parallel port adapter. I need this > for a key dongle. > The Server is a single machine and i want to use them with the all-in-one > plugin from ovirt. > > I do some tests with: > Fedora 17, CentOS6.3, Oracle Linux 6.3 > latest kernel, qemu-kvm and libvirt from repos. No extras or advanced > configurations. Only a simple standard Server. > > I install "yum groupinstall virtualization" + virt-manager and some other. > I configure iommu, modul blacklist and some other. > > Then i starting a Windows Server 2003 and assign the parallel adapter to the > running server. I look in the device manager and found the adapter card. > The dongle work finde and the Datev Lizenz Service are online. > > .. so far so good > > but when i install on the same Server ovirt. With same kernel qemu-kvm and > libvirt! > And i attach the adapter card to the windows server 2003 look in the device > manager and found the card with a error "device cannot be start (code 10)" > > I am now looking for several days after the error and have diverse tried but > I can not keep going. > > can someone help me? > > Thanks & greetings > Andreas > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > how did you attach the device via ovirt? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
On 01/06/2013 12:59 AM, Andreas Huser wrote: hi everybody i have trouble with pci passthrough of a parallel port adapter. I need this for a key dongle. The Server is a single machine and i want to use them with the all-in-one plugin from ovirt. I do some tests with: Fedora 17, CentOS6.3, Oracle Linux 6.3 latest kernel, qemu-kvm and libvirt from repos. No extras or advanced configurations. Only a simple standard Server. I install "yum groupinstall virtualization" + virt-manager and some other. I configure iommu, modul blacklist and some other. Then i starting a Windows Server 2003 and assign the parallel adapter to the running server. I look in the device manager and found the adapter card. The dongle work finde and the Datev Lizenz Service are online. .. so far so good but when i install on the same Server ovirt. With same kernel qemu-kvm and libvirt! And i attach the adapter card to the windows server 2003 look in the device manager and found the card with a error "device cannot be start (code 10)" I am now looking for several days after the error and have diverse tried but I can not keep going. can someone help me? Thanks & greetings Andreas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users how did you attach the device via ovirt? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] trouble with pci passthrough
Hi all, have nobody an idea how i can assign a pci device to a virtual machine with a ovirt installation? Regards Andreas - Ursprüngliche Mail - Von: "Andreas Huser" An: users@ovirt.org Gesendet: Samstag, 5. Januar 2013 23:59:31 Betreff: [Users] trouble with pci passthrough hi everybody i have trouble with pci passthrough of a parallel port adapter. I need this for a key dongle. The Server is a single machine and i want to use them with the all-in-one plugin from ovirt. I do some tests with: Fedora 17, CentOS6.3, Oracle Linux 6.3 latest kernel, qemu-kvm and libvirt from repos. No extras or advanced configurations. Only a simple standard Server. I install "yum groupinstall virtualization" + virt-manager and some other. I configure iommu, modul blacklist and some other. Then i starting a Windows Server 2003 and assign the parallel adapter to the running server. I look in the device manager and found the adapter card. The dongle work finde and the Datev Lizenz Service are online. .. so far so good but when i install on the same Server ovirt. With same kernel qemu-kvm and libvirt! And i attach the adapter card to the windows server 2003 look in the device manager and found the card with a error "device cannot be start (code 10)" I am now looking for several days after the error and have diverse tried but I can not keep going. can someone help me? Thanks & greetings Andreas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] trouble with pci passthrough
hi everybody i have trouble with pci passthrough of a parallel port adapter. I need this for a key dongle. The Server is a single machine and i want to use them with the all-in-one plugin from ovirt. I do some tests with: Fedora 17, CentOS6.3, Oracle Linux 6.3 latest kernel, qemu-kvm and libvirt from repos. No extras or advanced configurations. Only a simple standard Server. I install "yum groupinstall virtualization" + virt-manager and some other. I configure iommu, modul blacklist and some other. Then i starting a Windows Server 2003 and assign the parallel adapter to the running server. I look in the device manager and found the adapter card. The dongle work finde and the Datev Lizenz Service are online. .. so far so good but when i install on the same Server ovirt. With same kernel qemu-kvm and libvirt! And i attach the adapter card to the windows server 2003 look in the device manager and found the card with a error "device cannot be start (code 10)" I am now looking for several days after the error and have diverse tried but I can not keep going. can someone help me? Thanks & greetings Andreas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users