Re: [ovirt-users] Fail to add a second network
Could you please share /var/log/vdsm/vdsm.log and supervdsm.log? 2018-01-24 18:14 GMT+01:00 carl langlois : > Yes there are on the same subnet. > > On Wed, Jan 24, 2018 at 11:58 AM, Petr Horacek > wrote: > >> Could you hover the Out-Of-Sync icon in Setup Networks dialog and check >> what is causing the issue? >> >> Are both interfaces, you use DHCP on, connected to the same subnet? >> >> 2018-01-24 17:34 GMT+01:00 carl langlois : >> >>> Hi Petr, >>> >>> The "VM Network" explain why i do not have the bridge, thanks for the >>> precision. >>> But i still have my problem..but i suspect my problem to be >>> routing/gateway issue. Should it be using Static address if i already have >>> the other interface use DHCP? >>> I have try using DHCP with the other interface but when i manually bring >>> it up i got difficulty reaching this host.. >>> >>> Any hints? >>> >>> Carl >>> >>> >>> >>> >>> >>> On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek >>> wrote: >>> Hello Carl, If you did not mark the network as "VM Network" it will be created bridgeless. Do you think you could share vdsm.log and supervdsm.log from your host, so I could look into it? Thanks, Petr 2018-01-23 18:35 GMT+01:00 carl langlois : > Hi Kasturi > > Thanks for the help. When i am able to add a new network but when i > try to sync the network it always stay out of sync and if i ssh to that > host i do not see the bridge but the network card is up and a ip is assign > to it. > > Thanks > > Carl > > On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra > wrote: > >> Hi Carl, >> >> Below are the steps to configure back end network which is >> glusternw. >> >> 1) create a new network called 'glusternw' >> 2) Now go to clusters tab and select Logical networks tab. >> 3) You should see the newly created network there. >> 4) select the network and click on 'Manage Networks' >> 5) In Manage networks window for the newly created network select >> both 'Migration' & glusternw and click ok. >> 6) Now go to the hosts tab click on one host and select 'Network >> Interfaces' tab. >> 7) select the interface to which you would like to assign the backend >> network, drag and drop glusternw to that interface and click ok >> 8) You will see that network is now out of sync. >> 9) Please click refresh capabilities which will bring the network >> online. >> >> Hope this helps !! >> >> Thanks >> kasturi >> >> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois < >> crl.langl...@gmail.com> wrote: >> >>> HI all, >>> >>> I am trying to add second network for back-end traffic. My setup is >>> a 3 hosts running with gluster storage in 3+1 replicat. Now i am trying >>> to >>> add a second network with the UI and when i try to had a the host >>> interface >>> to the new network it is always failing and i lost communication with >>> this >>> host. I am not sure what are the step to add a second network with >>> already >>> 3 Host in the cluster. >>> >>> My setup us 4.2. >>> >>> Any inputs would be appreciated. >>> >>> Thanks >>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > >>> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Yes there are on the same subnet. On Wed, Jan 24, 2018 at 11:58 AM, Petr Horacek wrote: > Could you hover the Out-Of-Sync icon in Setup Networks dialog and check > what is causing the issue? > > Are both interfaces, you use DHCP on, connected to the same subnet? > > 2018-01-24 17:34 GMT+01:00 carl langlois : > >> Hi Petr, >> >> The "VM Network" explain why i do not have the bridge, thanks for the >> precision. >> But i still have my problem..but i suspect my problem to be >> routing/gateway issue. Should it be using Static address if i already have >> the other interface use DHCP? >> I have try using DHCP with the other interface but when i manually bring >> it up i got difficulty reaching this host.. >> >> Any hints? >> >> Carl >> >> >> >> >> >> On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek >> wrote: >> >>> Hello Carl, >>> >>> If you did not mark the network as "VM Network" it will be created >>> bridgeless. >>> >>> Do you think you could share vdsm.log and supervdsm.log from your host, >>> so I could look into it? >>> >>> Thanks, >>> Petr >>> >>> 2018-01-23 18:35 GMT+01:00 carl langlois : >>> Hi Kasturi Thanks for the help. When i am able to add a new network but when i try to sync the network it always stay out of sync and if i ssh to that host i do not see the bridge but the network card is up and a ip is assign to it. Thanks Carl On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra wrote: > Hi Carl, > > Below are the steps to configure back end network which is > glusternw. > > 1) create a new network called 'glusternw' > 2) Now go to clusters tab and select Logical networks tab. > 3) You should see the newly created network there. > 4) select the network and click on 'Manage Networks' > 5) In Manage networks window for the newly created network select both > 'Migration' & glusternw and click ok. > 6) Now go to the hosts tab click on one host and select 'Network > Interfaces' tab. > 7) select the interface to which you would like to assign the backend > network, drag and drop glusternw to that interface and click ok > 8) You will see that network is now out of sync. > 9) Please click refresh capabilities which will bring the network > online. > > Hope this helps !! > > Thanks > kasturi > > On Tue, Jan 23, 2018 at 5:33 AM, carl langlois > wrote: > >> HI all, >> >> I am trying to add second network for back-end traffic. My setup is a >> 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to >> add a second network with the UI and when i try to had a the host >> interface >> to the new network it is always failing and i lost communication with >> this >> host. I am not sure what are the step to add a second network with >> already >> 3 Host in the cluster. >> >> My setup us 4.2. >> >> Any inputs would be appreciated. >> >> Thanks >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Could you hover the Out-Of-Sync icon in Setup Networks dialog and check what is causing the issue? Are both interfaces, you use DHCP on, connected to the same subnet? 2018-01-24 17:34 GMT+01:00 carl langlois : > Hi Petr, > > The "VM Network" explain why i do not have the bridge, thanks for the > precision. > But i still have my problem..but i suspect my problem to be > routing/gateway issue. Should it be using Static address if i already have > the other interface use DHCP? > I have try using DHCP with the other interface but when i manually bring > it up i got difficulty reaching this host.. > > Any hints? > > Carl > > > > > > On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek wrote: > >> Hello Carl, >> >> If you did not mark the network as "VM Network" it will be created >> bridgeless. >> >> Do you think you could share vdsm.log and supervdsm.log from your host, >> so I could look into it? >> >> Thanks, >> Petr >> >> 2018-01-23 18:35 GMT+01:00 carl langlois : >> >>> Hi Kasturi >>> >>> Thanks for the help. When i am able to add a new network but when i try >>> to sync the network it always stay out of sync and if i ssh to that host i >>> do not see the bridge but the network card is up and a ip is assign to it. >>> >>> Thanks >>> >>> Carl >>> >>> On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra >>> wrote: >>> Hi Carl, Below are the steps to configure back end network which is glusternw. 1) create a new network called 'glusternw' 2) Now go to clusters tab and select Logical networks tab. 3) You should see the newly created network there. 4) select the network and click on 'Manage Networks' 5) In Manage networks window for the newly created network select both 'Migration' & glusternw and click ok. 6) Now go to the hosts tab click on one host and select 'Network Interfaces' tab. 7) select the interface to which you would like to assign the backend network, drag and drop glusternw to that interface and click ok 8) You will see that network is now out of sync. 9) Please click refresh capabilities which will bring the network online. Hope this helps !! Thanks kasturi On Tue, Jan 23, 2018 at 5:33 AM, carl langlois wrote: > HI all, > > I am trying to add second network for back-end traffic. My setup is a > 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to > add a second network with the UI and when i try to had a the host > interface > to the new network it is always failing and i lost communication with this > host. I am not sure what are the step to add a second network with > already > 3 Host in the cluster. > > My setup us 4.2. > > Any inputs would be appreciated. > > Thanks > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Hi Petr, The "VM Network" explain why i do not have the bridge, thanks for the precision. But i still have my problem..but i suspect my problem to be routing/gateway issue. Should it be using Static address if i already have the other interface use DHCP? I have try using DHCP with the other interface but when i manually bring it up i got difficulty reaching this host.. Any hints? Carl On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek wrote: > Hello Carl, > > If you did not mark the network as "VM Network" it will be created > bridgeless. > > Do you think you could share vdsm.log and supervdsm.log from your host, so > I could look into it? > > Thanks, > Petr > > 2018-01-23 18:35 GMT+01:00 carl langlois : > >> Hi Kasturi >> >> Thanks for the help. When i am able to add a new network but when i try >> to sync the network it always stay out of sync and if i ssh to that host i >> do not see the bridge but the network card is up and a ip is assign to it. >> >> Thanks >> >> Carl >> >> On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra wrote: >> >>> Hi Carl, >>> >>> Below are the steps to configure back end network which is >>> glusternw. >>> >>> 1) create a new network called 'glusternw' >>> 2) Now go to clusters tab and select Logical networks tab. >>> 3) You should see the newly created network there. >>> 4) select the network and click on 'Manage Networks' >>> 5) In Manage networks window for the newly created network select both >>> 'Migration' & glusternw and click ok. >>> 6) Now go to the hosts tab click on one host and select 'Network >>> Interfaces' tab. >>> 7) select the interface to which you would like to assign the backend >>> network, drag and drop glusternw to that interface and click ok >>> 8) You will see that network is now out of sync. >>> 9) Please click refresh capabilities which will bring the network online. >>> >>> Hope this helps !! >>> >>> Thanks >>> kasturi >>> >>> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois >>> wrote: >>> HI all, I am trying to add second network for back-end traffic. My setup is a 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to add a second network with the UI and when i try to had a the host interface to the new network it is always failing and i lost communication with this host. I am not sure what are the step to add a second network with already 3 Host in the cluster. My setup us 4.2. Any inputs would be appreciated. Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users >>> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Hi Carl, Can you try doing a refresh capabilities on the host ? Are you seeing the same issue even after that ? Thanks kasturi On Tue, Jan 23, 2018 at 11:05 PM, carl langlois wrote: > Hi Kasturi > > Thanks for the help. When i am able to add a new network but when i try to > sync the network it always stay out of sync and if i ssh to that host i do > not see the bridge but the network card is up and a ip is assign to it. > > Thanks > > Carl > > On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra wrote: > >> Hi Carl, >> >> Below are the steps to configure back end network which is glusternw. >> >> 1) create a new network called 'glusternw' >> 2) Now go to clusters tab and select Logical networks tab. >> 3) You should see the newly created network there. >> 4) select the network and click on 'Manage Networks' >> 5) In Manage networks window for the newly created network select both >> 'Migration' & glusternw and click ok. >> 6) Now go to the hosts tab click on one host and select 'Network >> Interfaces' tab. >> 7) select the interface to which you would like to assign the backend >> network, drag and drop glusternw to that interface and click ok >> 8) You will see that network is now out of sync. >> 9) Please click refresh capabilities which will bring the network online. >> >> Hope this helps !! >> >> Thanks >> kasturi >> >> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois >> wrote: >> >>> HI all, >>> >>> I am trying to add second network for back-end traffic. My setup is a 3 >>> hosts running with gluster storage in 3+1 replicat. Now i am trying to add >>> a second network with the UI and when i try to had a the host interface to >>> the new network it is always failing and i lost communication with this >>> host. I am not sure what are the step to add a second network with already >>> 3 Host in the cluster. >>> >>> My setup us 4.2. >>> >>> Any inputs would be appreciated. >>> >>> Thanks >>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Hello Carl, If you did not mark the network as "VM Network" it will be created bridgeless. Do you think you could share vdsm.log and supervdsm.log from your host, so I could look into it? Thanks, Petr 2018-01-23 18:35 GMT+01:00 carl langlois : > Hi Kasturi > > Thanks for the help. When i am able to add a new network but when i try to > sync the network it always stay out of sync and if i ssh to that host i do > not see the bridge but the network card is up and a ip is assign to it. > > Thanks > > Carl > > On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra wrote: > >> Hi Carl, >> >> Below are the steps to configure back end network which is glusternw. >> >> 1) create a new network called 'glusternw' >> 2) Now go to clusters tab and select Logical networks tab. >> 3) You should see the newly created network there. >> 4) select the network and click on 'Manage Networks' >> 5) In Manage networks window for the newly created network select both >> 'Migration' & glusternw and click ok. >> 6) Now go to the hosts tab click on one host and select 'Network >> Interfaces' tab. >> 7) select the interface to which you would like to assign the backend >> network, drag and drop glusternw to that interface and click ok >> 8) You will see that network is now out of sync. >> 9) Please click refresh capabilities which will bring the network online. >> >> Hope this helps !! >> >> Thanks >> kasturi >> >> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois >> wrote: >> >>> HI all, >>> >>> I am trying to add second network for back-end traffic. My setup is a 3 >>> hosts running with gluster storage in 3+1 replicat. Now i am trying to add >>> a second network with the UI and when i try to had a the host interface to >>> the new network it is always failing and i lost communication with this >>> host. I am not sure what are the step to add a second network with already >>> 3 Host in the cluster. >>> >>> My setup us 4.2. >>> >>> Any inputs would be appreciated. >>> >>> Thanks >>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Hi Kasturi Thanks for the help. When i am able to add a new network but when i try to sync the network it always stay out of sync and if i ssh to that host i do not see the bridge but the network card is up and a ip is assign to it. Thanks Carl On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra wrote: > Hi Carl, > > Below are the steps to configure back end network which is glusternw. > > 1) create a new network called 'glusternw' > 2) Now go to clusters tab and select Logical networks tab. > 3) You should see the newly created network there. > 4) select the network and click on 'Manage Networks' > 5) In Manage networks window for the newly created network select both > 'Migration' & glusternw and click ok. > 6) Now go to the hosts tab click on one host and select 'Network > Interfaces' tab. > 7) select the interface to which you would like to assign the backend > network, drag and drop glusternw to that interface and click ok > 8) You will see that network is now out of sync. > 9) Please click refresh capabilities which will bring the network online. > > Hope this helps !! > > Thanks > kasturi > > On Tue, Jan 23, 2018 at 5:33 AM, carl langlois > wrote: > >> HI all, >> >> I am trying to add second network for back-end traffic. My setup is a 3 >> hosts running with gluster storage in 3+1 replicat. Now i am trying to add >> a second network with the UI and when i try to had a the host interface to >> the new network it is always failing and i lost communication with this >> host. I am not sure what are the step to add a second network with already >> 3 Host in the cluster. >> >> My setup us 4.2. >> >> Any inputs would be appreciated. >> >> Thanks >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fail to add a second network
Hi Carl, Below are the steps to configure back end network which is glusternw. 1) create a new network called 'glusternw' 2) Now go to clusters tab and select Logical networks tab. 3) You should see the newly created network there. 4) select the network and click on 'Manage Networks' 5) In Manage networks window for the newly created network select both 'Migration' & glusternw and click ok. 6) Now go to the hosts tab click on one host and select 'Network Interfaces' tab. 7) select the interface to which you would like to assign the backend network, drag and drop glusternw to that interface and click ok 8) You will see that network is now out of sync. 9) Please click refresh capabilities which will bring the network online. Hope this helps !! Thanks kasturi On Tue, Jan 23, 2018 at 5:33 AM, carl langlois wrote: > HI all, > > I am trying to add second network for back-end traffic. My setup is a 3 > hosts running with gluster storage in 3+1 replicat. Now i am trying to add > a second network with the UI and when i try to had a the host interface to > the new network it is always failing and i lost communication with this > host. I am not sure what are the step to add a second network with already > 3 Host in the cluster. > > My setup us 4.2. > > Any inputs would be appreciated. > > Thanks > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Fail to add a second network
HI all, I am trying to add second network for back-end traffic. My setup is a 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to add a second network with the UI and when i try to had a the host interface to the new network it is always failing and i lost communication with this host. I am not sure what are the step to add a second network with already 3 Host in the cluster. My setup us 4.2. Any inputs would be appreciated. Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users