[ovirt-users] Re: oVirt + gluster with JBOD

[Eduardo Mayoral]

Good point, I will certainly take that into account!

Thanks,

--

Eduardo Mayoral.



On 13/09/18 19:15, Donny Davis wrote:
> You could always go expand the volume after deployment by adding more
> disks to the logical volume it creates.
>
> On Wed, Sep 12, 2018, 11:38 PM Jayme  > wrote:
>
> Eduardo, there is one thing you should be aware of.  The jbod
> disks aren't all pooled together to create one large storage
> domain. I had to spread my data domains over the devices such as a
> data domain on /dev/SDA and data2 on sdb etc not a big problem
> with only two disks per server but with ten it could get ugly 
>
> On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral,  > wrote:
>
> Thanks for your answers!
>
> Yes, my plan is a replica-3 too. The cluster will be bigger,
> though, 4 or 5 nodes with 10 disks each -> 40 to 50 bricks.
>
> Again, thanks for your help.
>
> --
> Eduardo Mayoral.
>
> On 12/09/18 20:54, Jayme wrote:
>> Should also note that I am using replica 3 configuration with
>> no arbiter for extra redundancy.
>>
>> On Wed, Sep 12, 2018 at 3:53 PM Jayme > > wrote:
>>
>> I am running a three server oVirt hyperconverged setup
>> with JBOD disks.  Two 2TB SSDs in JBOD per server.  The
>> configuration is working very well for me so far.
>>
>>
>>
>> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis
>> mailto:do...@fortnebula.com>> wrote:
>>
>> JBOD is on the drop down when you do the setup for
>> the volumes
>>
>> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral
>> mailto:emayo...@arsys.es>> wrote:
>>
>> Hi!
>>
>>   I am thinking about using some spare servers I
>> have for a
>> hyperconverged oVirt + gluster. Only problem with
>> these servers is that
>> the RAID card is not specially good, so I am
>> considering using gluster
>> in a JBOD configuration. JBOD is supported for
>> recent versions of
>> gluster, but I am not sure if this configuration
>> is supported by oVirt,
>> or if there are any special considerations I
>> should take into account.
>>
>>     Anyone running oVirt + gluster with JBOD who
>> can comment on this?
>>
>>     Thanks!
>>
>> --
>>
>> Eduardo Mayoral.
>>
>> ___
>> Users mailing list -- users@ovirt.org
>> 
>> To unsubscribe send an email to
>> users-le...@ovirt.org 
>> Privacy Statement:
>> https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
>>
>> ___
>> Users mailing list -- users@ovirt.org
>> 
>> To unsubscribe send an email to users-le...@ovirt.org
>> 
>> Privacy Statement:
>> https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/
>>
>

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EEJQ35KS4D4LYWRQNOSXD3EQRHSPD3KV/

[ovirt-users] Re: oVirt + gluster with JBOD

[Donny Davis]

You could always go expand the volume after deployment by adding more disks
to the logical volume it creates.

On Wed, Sep 12, 2018, 11:38 PM Jayme  wrote:

> Eduardo, there is one thing you should be aware of.  The jbod disks aren't
> all pooled together to create one large storage domain. I had to spread my
> data domains over the devices such as a data domain on /dev/SDA and data2
> on sdb etc not a big problem with only two disks per server but with ten it
> could get ugly
>
> On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral,  wrote:
>
>> Thanks for your answers!
>>
>> Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4 or
>> 5 nodes with 10 disks each -> 40 to 50 bricks.
>> Again, thanks for your help.
>>
>> --
>> Eduardo Mayoral.
>>
>> On 12/09/18 20:54, Jayme wrote:
>>
>> Should also note that I am using replica 3 configuration with no arbiter
>> for extra redundancy.
>>
>> On Wed, Sep 12, 2018 at 3:53 PM Jayme  wrote:
>>
>>> I am running a three server oVirt hyperconverged setup with JBOD disks.
>>> Two 2TB SSDs in JBOD per server.  The configuration is working very well
>>> for me so far.
>>>
>>>
>>>
>>> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis 
>>> wrote:
>>>
 JBOD is on the drop down when you do the setup for the volumes

 On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral 
 wrote:

> Hi!
>
>   I am thinking about using some spare servers I have for a
> hyperconverged oVirt + gluster. Only problem with these servers is that
> the RAID card is not specially good, so I am considering using gluster
> in a JBOD configuration. JBOD is supported for recent versions of
> gluster, but I am not sure if this configuration is supported by oVirt,
> or if there are any special considerations I should take into account.
>
> Anyone running oVirt + gluster with JBOD who can comment on this?
>
> Thanks!
>
> --
>
> Eduardo Mayoral.
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
>
 ___
 Users mailing list -- users@ovirt.org
 To unsubscribe send an email to users-le...@ovirt.org
 Privacy Statement: https://www.ovirt.org/site/privacy-policy/
 oVirt Code of Conduct:
 https://www.ovirt.org/community/about/community-guidelines/
 List Archives:
 https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/

>>>
>>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WAHY6ICZZXRQMFRZ72SMFXAPEQZ3CE3N/

[ovirt-users] Re: oVirt + gluster with JBOD

[Jayme]

Eduardo, there is one thing you should be aware of.  The jbod disks aren't
all pooled together to create one large storage domain. I had to spread my
data domains over the devices such as a data domain on /dev/SDA and data2
on sdb etc not a big problem with only two disks per server but with ten it
could get ugly

On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral,  wrote:

> Thanks for your answers!
>
> Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4 or
> 5 nodes with 10 disks each -> 40 to 50 bricks.
> Again, thanks for your help.
>
> --
> Eduardo Mayoral.
>
> On 12/09/18 20:54, Jayme wrote:
>
> Should also note that I am using replica 3 configuration with no arbiter
> for extra redundancy.
>
> On Wed, Sep 12, 2018 at 3:53 PM Jayme  wrote:
>
>> I am running a three server oVirt hyperconverged setup with JBOD disks.
>> Two 2TB SSDs in JBOD per server.  The configuration is working very well
>> for me so far.
>>
>>
>>
>> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis  wrote:
>>
>>> JBOD is on the drop down when you do the setup for the volumes
>>>
>>> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral  wrote:
>>>
 Hi!

   I am thinking about using some spare servers I have for a
 hyperconverged oVirt + gluster. Only problem with these servers is that
 the RAID card is not specially good, so I am considering using gluster
 in a JBOD configuration. JBOD is supported for recent versions of
 gluster, but I am not sure if this configuration is supported by oVirt,
 or if there are any special considerations I should take into account.

 Anyone running oVirt + gluster with JBOD who can comment on this?

 Thanks!

 --

 Eduardo Mayoral.

 ___
 Users mailing list -- users@ovirt.org
 To unsubscribe send an email to users-le...@ovirt.org
 Privacy Statement: https://www.ovirt.org/site/privacy-policy/
 oVirt Code of Conduct:
 https://www.ovirt.org/community/about/community-guidelines/
 List Archives:
 https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/

>>> ___
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-le...@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct:
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/
>>>
>>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HATZBNQTEZUZLNRLA264SWN4X6J2HU5F/

[ovirt-users] Re: oVirt + gluster with JBOD

[Eduardo Mayoral]

Thanks for your answers!

Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4
or 5 nodes with 10 disks each -> 40 to 50 bricks.

Again, thanks for your help.

--
Eduardo Mayoral.

On 12/09/18 20:54, Jayme wrote:
> Should also note that I am using replica 3 configuration with no
> arbiter for extra redundancy.
>
> On Wed, Sep 12, 2018 at 3:53 PM Jayme  > wrote:
>
> I am running a three server oVirt hyperconverged setup with JBOD
> disks.  Two 2TB SSDs in JBOD per server.  The configuration is
> working very well for me so far.
>
>
>
> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis  > wrote:
>
> JBOD is on the drop down when you do the setup for the volumes
>
> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral
> mailto:emayo...@arsys.es>> wrote:
>
> Hi!
>
>   I am thinking about using some spare servers I have for a
> hyperconverged oVirt + gluster. Only problem with these
> servers is that
> the RAID card is not specially good, so I am considering
> using gluster
> in a JBOD configuration. JBOD is supported for recent
> versions of
> gluster, but I am not sure if this configuration is
> supported by oVirt,
> or if there are any special considerations I should take
> into account.
>
>     Anyone running oVirt + gluster with JBOD who can
> comment on this?
>
>     Thanks!
>
> --
>
> Eduardo Mayoral.
>
> ___
> Users mailing list -- users@ovirt.org 
> To unsubscribe send an email to users-le...@ovirt.org
> 
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
>
> ___
> Users mailing list -- users@ovirt.org 
> To unsubscribe send an email to users-le...@ovirt.org
> 
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/
>

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BXYQ7LCDWOUUU2WKNHXWXXN2JS7ZYOM2/

[ovirt-users] Re: oVirt + gluster with JBOD

[Jayme]

Should also note that I am using replica 3 configuration with no arbiter
for extra redundancy.

On Wed, Sep 12, 2018 at 3:53 PM Jayme  wrote:

> I am running a three server oVirt hyperconverged setup with JBOD disks.
> Two 2TB SSDs in JBOD per server.  The configuration is working very well
> for me so far.
>
>
>
> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis  wrote:
>
>> JBOD is on the drop down when you do the setup for the volumes
>>
>> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral  wrote:
>>
>>> Hi!
>>>
>>>   I am thinking about using some spare servers I have for a
>>> hyperconverged oVirt + gluster. Only problem with these servers is that
>>> the RAID card is not specially good, so I am considering using gluster
>>> in a JBOD configuration. JBOD is supported for recent versions of
>>> gluster, but I am not sure if this configuration is supported by oVirt,
>>> or if there are any special considerations I should take into account.
>>>
>>> Anyone running oVirt + gluster with JBOD who can comment on this?
>>>
>>> Thanks!
>>>
>>> --
>>>
>>> Eduardo Mayoral.
>>>
>>> ___
>>> Users mailing list -- users@ovirt.org
>>> To unsubscribe send an email to users-le...@ovirt.org
>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct:
>>> https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
>>>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/
>>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5LAVPJGOFIITR67XAGVGCOPCVJWDCXVY/

[ovirt-users] Re: oVirt + gluster with JBOD

[Jayme]

I am running a three server oVirt hyperconverged setup with JBOD disks.
Two 2TB SSDs in JBOD per server.  The configuration is working very well
for me so far.



On Wed, Sep 12, 2018 at 2:36 PM Donny Davis  wrote:

> JBOD is on the drop down when you do the setup for the volumes
>
> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral  wrote:
>
>> Hi!
>>
>>   I am thinking about using some spare servers I have for a
>> hyperconverged oVirt + gluster. Only problem with these servers is that
>> the RAID card is not specially good, so I am considering using gluster
>> in a JBOD configuration. JBOD is supported for recent versions of
>> gluster, but I am not sure if this configuration is supported by oVirt,
>> or if there are any special considerations I should take into account.
>>
>> Anyone running oVirt + gluster with JBOD who can comment on this?
>>
>> Thanks!
>>
>> --
>>
>> Eduardo Mayoral.
>>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
>>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KXKP5VHSJUR4ZOBIAPX6ICMP36BPT27E/

[ovirt-users] Re: oVirt + gluster with JBOD

[Donny Davis]

JBOD is on the drop down when you do the setup for the volumes

On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral  wrote:

> Hi!
>
>   I am thinking about using some spare servers I have for a
> hyperconverged oVirt + gluster. Only problem with these servers is that
> the RAID card is not specially good, so I am considering using gluster
> in a JBOD configuration. JBOD is supported for recent versions of
> gluster, but I am not sure if this configuration is supported by oVirt,
> or if there are any special considerations I should take into account.
>
> Anyone running oVirt + gluster with JBOD who can comment on this?
>
> Thanks!
>
> --
>
> Eduardo Mayoral.
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/