Unfortunately not,
I'm trying to get the N310s to operate at 584.2 MHz, so my LO is going at
1168.4 MHz (there's a note saying the external LO should supply twice the
desired center frequency). I would have thought there's no need to specify
the center frequency when running with the LO switched to external, but
when I run the setup without specifying the center frequency it doesn't
seem to work.
-Mark
On Fri, Oct 25, 2019 at 6:27 AM Rob Kossler wrote:
> The N310 data sheet (in one of the footnotes) indicates that external LO
> is limited to the frequency range 300-4000 MHz. Are you trying to operate
> below 300MHz?
> Rob
>
> On Thu, Oct 24, 2019 at 3:42 PM Mark Wagner via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
>> Hi all,
>>
>> I'm currently trying to run a set of USRP N310s all using the same
>> external LO, but I seem to be getting this error
>>
>> "[ERROR] [0/Radio_1] RX LO lowband does not support setting source to
>> external"
>>
>> which will repeat for all the radios. I tried looking online for the
>> source of the error but no dice. It seems like the radios are ignoring the
>> LO I'm giving them and using their internal ones instead. Any thoughts?
>>
>> -Mark
>>
>> --
>> Mark Wagner
>> University of California San Diego
>> Electrical and Computer Engineering
>>
>> ___
>> USRP-users mailing list
>> USRP-users@lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>
--
Mark Wagner
University of California San Diego
Electrical and Computer Engineering
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
