Re: [vdr] vdr-xine works nice with HD channels - xineliboutput and vdr-streamdev are broken
I don't use VDPAU, only xv. 2009/5/25 gimli gi...@dark-green.com Also OSD with vdpau, using xineliboutput cvs, is broken since a long time. cu Edgar (gimli) Hucek I've just tried vdr 1.7.7. With latest cvs xineliboutput, when i switch to HD channel (H264), i have a seg fault. With vdr-xine, latest cvs too, i have no vdr OSD :-( 2009/5/3 Artem Makhutov ar...@makhutov.org Hello, sometime ago I have reported, that I have problems watching HD channes with streamdev and xineliboutput. Today I have tried vdr-xine with vdr 1.7.7. All HD channels are working like a charm. So there must be a problem in streamdev and xineliboutput... Regards, Artem ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] IPTV streaming of h.264 channels - VDR as server
Yes it is, you have to use TS stream. It works for me with vlc using url like http://ip:port/TS/HDchannel. 'Z 2009/5/17 Goga777 goga...@bk.ru has someone the experience with IPTV streaming of h264 hdtv channels to local network from VDR ? which software need to use for that ? You can use streamdev for it. for iptv hdtv h264 ? are you sure ? does it really work ? Goga ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] any way to highlight available channels only??
With the remote, when you use ch+ or ch-, only available channels are accessed. I know it's not what you expect but it's a beginning :-) 'Z 2009/5/7 Simon Baxter linu...@nzbaxters.com Hi Is there a plug-in or mechanism anyone's found to highlight the channels that are available for viewing or recording? My family complain that when some channel(s) are recording and try to switch channel they get CHANNEL NOT AVAILABLE and would like to be able to see from the channel list which channels can be viewed before they try and switch. Even though my VDR setup has 2x tuner cards, my provider sends channels on 8 transponders and sometimes I'm recording 2 channels on different transponders which really limits what can be viewed. Any ideas? Thanks Simon ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-xine works nice with HD channels - xineliboutput and vdr-streamdev are broken
I've just tried vdr 1.7.7. With latest cvs xineliboutput, when i switch to HD channel (H264), i have a seg fault. With vdr-xine, latest cvs too, i have no vdr OSD :-( 2009/5/3 Artem Makhutov ar...@makhutov.org Hello, sometime ago I have reported, that I have problems watching HD channes with streamdev and xineliboutput. Today I have tried vdr-xine with vdr 1.7.7. All HD channels are working like a charm. So there must be a problem in streamdev and xineliboutput... Regards, Artem ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [patch] compil vdr-1.7.4 against v4l-dvb hg as of today
Hi, I've recently had a problem too. I resolved it like that (i don't know if the compilation error was the same as mine...) : Add this line to the Makefile of VDR : DEFINES += -D_GNU_SOURCE *+DEFINES += -D__KERNEL_STRICT_NAMES * DEFINES += -DVIDEODIR=\$(VIDEODIR)\ Cheers. 2009/3/3 Gregoire Favre gregoire.fa...@gmail.com Hello, just tried compiling vdr-1.7.4 against my v4l-dvb hg's source which fails if I don't use this : --- vdr.c~ 2009-01-18 12:02:37.0 +0100 +++ vdr.c 2009-03-03 22:17:49.0 +0100 @@ -32,6 +32,7 @@ #include pwd.h #include signal.h #include stdlib.h +#include linux/types.h #include sys/capability.h #include sys/prctl.h #include termios.h Happy VDR :-) -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] media player and a/52 sound.
Did you try to use xine-ui directly instead of vdr-sxfe ? 2008/11/5 Pertti Kosunen [EMAIL PROTECTED] JJussi wrote: IF I set passthrough device to iec958:CARD=Intel,DEV=0, then result is: amp don't see any signal and playback is stopped after 1 second. Do you run vdr-sxfe with '--audio alsa'? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] stb0899 and tt s2-3200
Hi Igor, Thx a lot ! It works fine for me. 3 DVB cards : - Hauppauge Nova-s-plus (dvb-s) - Hauppauge nova-t (dvb-t) - Technotrend S2-3200 (dvb-s s2) No problem at all with SD and HD. I use VDR 1.7.0 with the needed patch (h264, s2api). cheers 'Z ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Configuring vdr-sxfe to use a single vdr backend for recordings/dvb cards
Hi, yesterday evening i followed your setup to create 1 client. Server : VDR VDR2 server Client : vdr-sxfe When i run the second VDR server i can't switch channels. It's bloked on channels attached to the first transponder (hope you understand what i mean). plz help... cheers, 'Z 2007/6/28, Alasdair Campbell [EMAIL PROTECTED]: On 18/06/07, Alasdair Campbell [EMAIL PROTECTED] wrote: On 16/06/07, Petri Hintukainen [EMAIL PROTECTED] wrote: On Wed, 2007-06-13 at 19:16 +0100, Alasdair Campbell wrote: Is it possible to have one of the VDR 'servers/instances' to be running on one of the clients rather than the main server pc? Yes. Then you don't need the -D option. The exact same setup except Client2 has an instance of VDR running in the background with 1 dvb card saving files to the server's /video mounted over nfs. Ideally all Clients + Master VDR Server will see channels on Client 2's satellite feed and be able to register timers on that server. This is more complicated :) I think you need to set every timer manually to the system where it is supposed to be recorded. Timersync won't work as it disables all recording at client(s). Using timersync and enabling recording at the client won't work if you use streamdev: both systems will see the same channels and would record the same timers in paraller. Maybe something like this might work: VDR1: (2x DVB-?): streamdev-server, streamdev-client connected to VDR2 VDR2: (1x DVB-S): streamdev-server, streamdev-client connected to VDR1 VDR3: (no DVB): 2 instances of streamdev-client: one connected to VDR1 and another to VDR2. Note that circular streamdev setup doesn't work without patching ( http://www.vdr-developer.org/mantisbt/view.php?id=198 ) If there was a way for PCI buses to traverse networks, then the location of the 3rd card wouldn't be an issue, but I don't believe that's possible... No, but transferring the device interface (/dev/dvb/...) over network is possible with something like nbd (network block device). I think I saw similar redirector for DVB devices few years ago: http://linuxtv.org/mailinglists/linux-dvb/2004/08-2004/msg00326.html But it seems quite old and unmaintained. I remember reading about this years ago, if it could work then it would be ideal for my situation - maybe for others too. Vadim Epmak's address is bouncing so I'll ask on the DVB mailing list and see if anyone else ever got it up and running. I'm keen on trying it out myself, and have started reading about porting drivers to 2.6 kernels. Could be an interesting way to learn more C ;-) In hindsight, I believe learning C on my own by porting a driver to the 2.6 kernel was a tad optimistic.. Sill won't compile, and I haven't got to grips with the changes in the dvb api from when this was written. No response yet on the linuxtv list. I'll keep working at the code - it could be a fun way to learn, and the principle seems quite straight-forward. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] ATI + mesa driver + vdr-xine = buffer usage : 100% - X freeze
Hi, my system : - ubuntu edgyup-to-date, - radeon 9700 using opensource radeon driver - vdr 1.4.3 (Eclipse pack from vdr.bluox.org) + vdr-xine 0.7.10 + xine-lib and xine-ui found at http://home.vrweb.de/~rnissl/ When DRI is loaded and 3D acceleration is ON my X server quickly freezes. My log (using ssh) tells me something like buffer usage: 0% (tid=19349) ERROR: 1 ring buffer overflow (177 bytes dropped) Mar 21 03:30:45 sid vdr: [19350] buffer usage: 70% (tid=19349) Mar 21 03:31:00 sid vdr: [19350] buffer usage: 80% (tid=19349) Mar 21 03:31:01 sid vdr: [19350] buffer usage: 90% (tid=19349) Mar 21 03:31:02 sid vdr: [19350] buffer usage: 100% (tid=19349) When i disable 3D acceleration (non dri) everything works fine but on HD channels (Astra, MPEG2) CPU load higher. Is there a way to prevent this sort of vdr buffer overflow ? I would like to keep my 3D acceleration enabled thx ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
