[vdr] no channel update on vdr 1.7.0

[spe]

Thanks for all the answers regarding my questions.

So far I can understand my hardware is not adapted to what I want to do.
I will proceed to the following :

- Install 2 twin lnb's
- Install 2 disecq switches.
- Is diseqc switch 1 ok ? or do i need diseqc 2.0

As explain I have 1 FF card and one S2-3200. On one of my dishes I also
have a rotor.

- Can I still use it ? Is there already a valid rotor plugin for 1.7.0 ?

My target is to achieve to be able to look on one TV on the output of the
FF card, and on a other TV on a other broadcasting on a vdr-to-vdr client.
I assume thats possible with that configuration ?

Can I record a third broadcasting ? (concurrent recording)
Can I look at a third broadcasting on a second vdr-to-vdr or http client ?

Even if I don't need HD, do I need to use 1.7.0 version with my S2-3200 ?

thanks,

sp


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] no channel update on vdr 1.7.0

[spe]

Hello,

I had a 1.5.13 running for a while on a nexus FF.

I did install a second card, S2-3200, together with the multiproto driver
and vdr 1.7.0, without patches at this moment, because I am not interested
in HD at this time. I am just looking to have 2 cards working to be able
to stream on several vdr clients and use the output of my FF card. The S2
card is on astra, and the FF on hotbird

I started with a “clean” vdrconf directory, and with a channel.conf with
only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels,
but it did only for a few.

After starting the first time, it scanned about 10 new channels and stops
there. In the DVB menu, update stands on “add new transponder”

I did try with an other channel.conf. I can see every FTA channel on
hotbird, but I have a black screen on astra (nothing as “channel not
available”).

The log does’nt learn me something either. In fact the log is flooded by
kernel messages about stb6100 that get_frequence and bandwith. The
frequence are always the same.
-why is the “autoscan” not working ? Do I need some “transponder file” ?

-how can I check the signal on my S2-3200 card ?

-how can I reduce the logs from stb6100 ?

-do I need to apply a concurrent recording patch to be able to stream 2 or
more signals ?

thanks for your help

sp



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr