[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Charles Hope char...@... wrote: Hi Charles ..I went back over my e-mails this morning ..and It was my mistake as far as Emily goes ..I got her name mixed up with another e-mail ..My fault entirely As far as Internet Explorer goes ..I have upgraded to the most recent wheich I believe is IE 8 ...and even today as I was in blip ..the menu and drop down menu are still covered by the Share and show player button..so that I have to take my cursor and place it between the show player and go button to click and get that drop down menu to appear. I hope that explains it well enough. Thanks again ..Sara Sara, I think I've figured out why you didn't get a helpful response from your original support e-mail. Emily responded? We don't have any Emily working with us! Are you absolutely certain that you sent the e-mail to supp...@...? Not .com or .fm? It is good to use the form at http://blip.tv/help/, because not only is it certain to avoid the unhelpful Emily, but it also gives us information about your set up which can help us diagnose problems. We do test on Internet Explorer versions 6 7. If something is screwy, we'd be very interested in the details so we can try to reproduce it. Thanks again, Rupert, for your help!
[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: Thanks Rupert ...Yes I have been reading in several places that IE can cause some headaches with different applications ..so I may look into Firfox now that I am embarking on some new things here on the net. Hey I have another question for you ...When I embed the videos into my site and I click play and they run to the end ..a little box pops up that has two options ...More and Again ...How do I disable that box ..or change the setting for that ..because when you click the more option it begins playing the entire rest of my class videos and I am trying to add a Welcome video to my main page ..But I sure don't need all my class videos to be viewed through it ..I went to another persons class sight and tried out their video that they have customized on blip and when you click on the more option ..you just get something that comes up and reads error...so I figure they have disabled that option somehow.??? thought maybe you could point me in the right direction ... O.k. once again ,..Thanks..Sara Yes, internet explorer is a bit of a pain, but Blip should have their site tested to work with IE, since it's still the most popular browser, I think. I think maybe they're Mac users. Firefox is good, it's what I use on my Mac, and Blip works fine with it, as do most things. On 9-Mar-09, at 6:53 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: I am using Internet Explorer ..I am guessing from what I have been reading lately ..that's a problem ? So should I use Firefox ..would that be better ? Ahhh... What web browser are you using? On 9-Mar-09, at 2:11 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show
Re: [videoblogging] Re: manage Show Player
I don't know how to do that. Looking at the options, as you have, I can't see a way to do it. I'm surprised, because almost everything else you can turn on or off. There might be a parameter you can put into the Advanced section - try using the form on the Blip site to ask them. On 11-Mar-09, at 8:39 AM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: Thanks Rupert ...Yes I have been reading in several places that IE can cause some headaches with different applications ..so I may look into Firfox now that I am embarking on some new things here on the net. Hey I have another question for you ...When I embed the videos into my site and I click play and they run to the end ..a little box pops up that has two options ...More and Again ...How do I disable that box ..or change the setting for that ..because when you click the more option it begins playing the entire rest of my class videos and I am trying to add a Welcome video to my main page ..But I sure don't need all my class videos to be viewed through it ..I went to another persons class sight and tried out their video that they have customized on blip and when you click on the more option ..you just get something that comes up and reads error...so I figure they have disabled that option somehow.??? thought maybe you could point me in the right direction ... O.k. once again ,..Thanks..Sara Yes, internet explorer is a bit of a pain, but Blip should have their site tested to work with IE, since it's still the most popular browser, I think. I think maybe they're Mac users. Firefox is good, it's what I use on my Mac, and Blip works fine with it, as do most things. On 9-Mar-09, at 6:53 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: I am using Internet Explorer ..I am guessing from what I have been reading lately ..that's a problem ? So should I use Firefox ..would that be better ? Ahhh... What web browser are you using? On 9-Mar-09, at 2:11 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single
[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: Alright I will go ask them...there must be a way to turn that off ..because they have it turned off on the other video I mentioned...I kind of figured it was in advanced ..but hated to go messing with things I don't know well enough about .. Thanks again ..Rupert ! ...Sara I don't know how to do that. Looking at the options, as you have, I can't see a way to do it. I'm surprised, because almost everything else you can turn on or off. There might be a parameter you can put into the Advanced section - try using the form on the Blip site to ask them. On 11-Mar-09, at 8:39 AM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Thanks Rupert ...Yes I have been reading in several places that IE can cause some headaches with different applications ..so I may look into Firfox now that I am embarking on some new things here on the net. Hey I have another question for you ...When I embed the videos into my site and I click play and they run to the end ..a little box pops up that has two options ...More and Again ...How do I disable that box ..or change the setting for that ..because when you click the more option it begins playing the entire rest of my class videos and I am trying to add a Welcome video to my main page ..But I sure don't need all my class videos to be viewed through it ..I went to another persons class sight and tried out their video that they have customized on blip and when you click on the more option ..you just get something that comes up and reads error...so I figure they have disabled that option somehow.??? thought maybe you could point me in the right direction ... O.k. once again ,..Thanks..Sara Yes, internet explorer is a bit of a pain, but Blip should have their site tested to work with IE, since it's still the most popular browser, I think. I think maybe they're Mac users. Firefox is good, it's what I use on my Mac, and Blip works fine with it, as do most things. On 9-Mar-09, at 6:53 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: I am using Internet Explorer ..I am guessing from what I have been reading lately ..that's a problem ? So should I use Firefox ..would that be better ? Ahhh... What web browser are you using? On 9-Mar-09, at 2:11 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio
Re: [videoblogging] Re: manage Show Player
Alright I will go ask them...there must be a way to turn that off ..because they have it turned off on the other video I mentioned...I kind of figured it was in advanced ..but hated to go messing with things I don't know well enough about .. You could also emal the site you want to mimic. If they have figured out the way you want to cusyomize, Im sure they'll clue you in. Could you share this site you are working on? Itll help us understand what you;re trying to do. Jay -- http://ryanishungry.com http://jaydedman.com http://twitter.com/jaydedman 917 371 6790
RE: [videoblogging] Re: manage Show Player
Sara, I think I've figured out why you didn't get a helpful response from your original support e-mail. Emily responded? We don't have any Emily working with us! Are you absolutely certain that you sent the e-mail to supp...@blip.tv? Not .com or .fm? It is good to use the form at http://blip.tv/help/, because not only is it certain to avoid the unhelpful Emily, but it also gives us information about your set up which can help us diagnose problems. We do test on Internet Explorer versions 6 7. If something is screwy, we'd be very interested in the details so we can try to reproduce it. Thanks again, Rupert, for your help!
[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show player ... then the only option under the code is Edit Player Customizations ..when you click on this it takes you back to the manage Show Player page Where I chose all the individual options for each page that I wanted. In General I added my name * clicked on Single Episode * and unchecked the share and embed option In branding I added my own name and left the blip Url Guide I had no clue so I left it checked Use this guide Colors I chose my colors Features I unchecked the share and embed code and in the preview section the player is correct but it isn't showing the video segment that I clicked on to begin with. O.k. that is where I am at ...I'm am sorry to be so naive about this ..It sure seems like a very simple process ..so I feel so stupid not getting this. I can't tell you how much I appreciate your help .. Sara Hi Sarah - welcome :) I use custom Blip players a lot. I think when you say Segments, you just mean 1 video for each segment, yes? You're talking about embedding separate single videos using your customised player? The trick is not to embed from My Show but to embed from the individual video post page. Go to your Dashboard and click on a video to go to its page. Click Share, on the right hand side, and choose Embed from the menu that pops up, then click Go. You should now see the embed code for that individual video, with a menu that says Custom Player Style: Default Show Player. You can just use this setting to embed an individual video - it's different from the My Show player, confusingly. Or you can choose a customized player with your own choice of buttons and colors, by clicking the Custom Player Style menu, and choosing your custom player from the menu. If you've created and saved a custom player correctly, you will have given it its own name. The other thing you can do is combine more than one video in a custom player, using Playlists. Add as many videos as you want to a Playlist, and then either use the standard embed code in the Playlist section, or create your own custom player and change Type to Playlist - then choose the playlist you've created. Weird that Blip haven't replied - they're usually super efficient at replying - it's always been one of the best things about them. Rupert http://twittervlog.tv On 8-Mar-09, at 9:51 AM, Sara Vanderwork wrote: Hi ..I am new to this group and bliptv ...I am having some trouble with the Manage Show Player ..It's probably a very simple solution ..but I just can't seem to figure it out. So if anyone could guide me I would be more than appreciative. O.k. I am giving an online class ..where I need to insert individual segments. So I have 4 segements uploaded. And when I go to My Show ..and click on the segment I want the Copy and Paste code for ..It gives me obviously ..the default player. So I saw that you can customize the player just under the Code ..and I went over and customized each section and saved it. But I still can't get each segment ..to have the customized player. So I know there must be a setting that I need to change ..However I must be missing it because I have played with all the setting for 2 days now and still can't get it to work the way I want. So any guidance on how to get the customized player to work with each segment so I can embed the code would be Great. Thanks ...Sara [Non-text portions of this message have been removed] Rupert http://twittervlog.tv/ Creative Mobile Filmmaking Shot, edited and sent with my Nokia N93 [Non-text portions of this message have been removed]
Re: [videoblogging] Re: manage Show Player
OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show player ... then the only option under the code is Edit Player Customizations ..when you click on this it takes you back to the manage Show Player page Where I chose all the individual options for each page that I wanted. In General I added my name * clicked on Single Episode * and unchecked the share and embed option In branding I added my own name and left the blip Url Guide I had no clue so I left it checked Use this guide Colors I chose my colors Features I unchecked the share and embed code and in the preview section the player is correct but it isn't showing the video segment that I clicked on to begin with. O.k. that is where I am at ...I'm am sorry to be so naive about this ..It sure seems like a very simple process ..so I feel so stupid not getting this. I can't tell you how much I appreciate your help .. Sara Hi Sarah - welcome :) I use custom Blip players a lot. I think when you say Segments, you just mean 1 video for each segment, yes? You're talking about embedding separate single videos using your customised player? The trick is not to embed from My Show but to embed from the individual video post page. Go to your Dashboard and click on a video to go to its page. Click Share, on the right hand side, and choose Embed from the menu that pops up, then click Go. You should now see the embed code for that individual video, with a menu that says Custom Player Style: Default Show Player. You can just use this setting to embed an individual video - it's different from the My Show player, confusingly. Or you can choose a customized player with your own choice of buttons and colors, by clicking the Custom Player Style menu, and choosing your custom player from the menu. If you've created and saved a custom player correctly, you will have given it its own name. The other thing you can do is combine more than one video in a custom player, using Playlists. Add as many videos as you want to a Playlist, and then either use the standard embed code in the Playlist section, or create your own custom player and change Type to Playlist - then choose the playlist you've created. Weird that Blip haven't replied - they're usually super efficient at replying - it's always been one of the best things about them. Rupert http://twittervlog.tv On 8-Mar-09, at 9:51 AM, Sara Vanderwork wrote: Hi ..I am new to this group and bliptv ...I am having some trouble with the Manage Show Player ..It's probably a very simple solution ..but I just can't seem to figure it out. So if anyone could guide me I would be more than appreciative. O.k. I am giving an online class ..where I need to insert individual segments. So I have 4 segements uploaded. And when I go to My Show ..and click on the segment I want the Copy and Paste code for ..It gives me obviously ..the default player. So I saw that you can customize the player just under the Code ..and I went over and customized each section and saved it. But I still can't get each segment ..to have the customized
[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show player ... then the only option under the code is Edit Player Customizations ..when you click on this it takes you back to the manage Show Player page Where I chose all the individual options for each page that I wanted. In General I added my name * clicked on Single Episode * and unchecked the share and embed option In branding I added my own name and left the blip Url Guide I had no clue so I left it checked Use this guide Colors I chose my colors Features I unchecked the share and embed code and in the preview section the player is correct but it isn't showing the video segment that I clicked on to begin with. O.k. that is where I am at ...I'm am sorry to be so naive about this ..It sure seems like a very simple process ..so I feel so stupid not getting this. I can't tell you how much I appreciate your help .. Sara Hi Sarah - welcome :) I use custom Blip players a lot. I think when you say Segments, you just mean 1 video for each segment, yes? You're talking about embedding separate single videos using your customised player? The trick is not to embed from My Show but to embed from the individual video post page. Go to your Dashboard and click on a video to go to its page. Click Share, on the right hand side, and choose Embed from the menu that pops up, then click Go. You should now see the embed code for that individual video, with a menu that says Custom Player Style: Default Show Player. You can just use this setting to embed an individual video - it's different from the My Show player, confusingly. Or you can choose a customized player with your own choice of buttons and colors, by clicking the Custom Player Style menu, and choosing your custom player from the menu. If you've created and saved a custom player correctly, you will have given it its own name.
Re: [videoblogging] Re: manage Show Player
Ahhh... What web browser are you using? On 9-Mar-09, at 2:11 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show player ... then the only option under the code is Edit Player Customizations ..when you click on this it takes you back to the manage Show Player page Where I chose all the individual options for each page that I wanted. In General I added my name * clicked on Single Episode * and unchecked the share and embed option In branding I added my own name and left the blip Url Guide I had no clue so I left it checked Use this guide Colors I chose my colors Features I unchecked the share and embed code and in the preview section the player is correct but it isn't showing the video segment that I clicked on to begin with. O.k. that is where I am at ...I'm am sorry to be so naive about this ..It sure seems like a very simple process ..so I feel so stupid not getting this. I can't tell you how much I appreciate your help .. Sara Hi Sarah - welcome :) I use custom Blip players a lot. I think when you say Segments, you just mean 1 video for each segment, yes? You're talking about embedding separate single videos using your customised player? The trick is not to embed from My Show but to embed from the individual video post page. Go to your Dashboard and click on a video to go to its page. Click Share, on the right hand side, and choose Embed from the menu that pops up, then click Go. You should now see the embed code for that individual video, with a menu that says Custom Player Style: Default Show Player. You can just use this setting to embed an individual video - it's different from the My Show player, confusingly. Or you can choose a customized player with your own choice of buttons and colors, by clicking the Custom Player Style menu, and choosing your custom player from the menu. If you've
[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: I am using Internet Explorer ..I am guessing from what I have been reading lately ..that's a problem ? So should I use Firefox ..would that be better ? Ahhh... What web browser are you using? On 9-Mar-09, at 2:11 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show player ... then the only option under the code is Edit Player Customizations ..when you click on this it takes you back to the manage Show Player page Where I chose all the individual options for each page that I wanted. In General I added my name * clicked on Single Episode * and unchecked the share and embed option In branding I added my own name and left the blip Url Guide I had no clue so I left it checked Use this guide Colors I chose my colors Features I unchecked the share and embed code and in the preview section the player is correct but it isn't showing the video segment that I clicked on to begin with. O.k. that is where I am at ...I'm am sorry to be so naive about this ..It sure seems like a very simple process ..so I feel so stupid not getting this. I can't tell you how much I appreciate your help .. Sara Hi Sarah - welcome :) I use custom Blip players a lot. I think when you say Segments, you just mean 1 video for each segment, yes? You're talking about embedding separate single videos using your customised player? The trick is not to embed from My Show but to embed from the individual video post page. Go to your Dashboard and click on a video to go to its page. Click Share, on the right hand side, and choose Embed from the menu that pops up, then click Go. You should now see the embed code for that individual video, with a menu that says Custom Player Style:
Re: [videoblogging] Re: manage Show Player
Yes, internet explorer is a bit of a pain, but Blip should have their site tested to work with IE, since it's still the most popular browser, I think. I think maybe they're Mac users. Firefox is good, it's what I use on my Mac, and Blip works fine with it, as do most things. On 9-Mar-09, at 6:53 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rup...@... wrote: I am using Internet Explorer ..I am guessing from what I have been reading lately ..that's a problem ? So should I use Firefox ..would that be better ? Ahhh... What web browser are you using? On 9-Mar-09, at 2:11 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: O.k. ...I did it but I have to tell you that I would have had it days ago ...Very Frustrating ..and I found the problem just now... On the page where the embed and show player button are...you kept mentioning that I should have a choice ..as to what cutomized player I wanted .. I kept looking for this option and could not find it ..so as I am looking very close I see writing behind the share and show player buttons ..so I go between them with my cursor and the stinking drop down menu pops down with the cutom players I have made in it ...so it is being hidden by the buttons and you can't see that option. So I never even knew that option existed ..talk about hours of wasted time clicking on that customize button and making player after player and getting no where .. Oh Well Well I wouldn't have found it without you Rupert ..you got me to looking closely at things ..So THANK YOU VERY MUCH !! Don't know if that's a glitch on Bliptvs end but boy I hope they get that remedied .. Thanks to all here who helped ..I am very grateful !! Have a Great Day !!! Sara OK. I left out the part where I should have said copy and paste the code. I think you might be so frustrated with it all that you're looking too hard. You're on the video page, you've clicked Share, chosen Embed and clicked Go - then just copy the code that appears. Don't click Edit player customizations. The code you're supposed to be embedding starts with this: embed src=http://blip.tv/play/... That's what you want to copy and paste into your page. Just that. It's in a big box directly under the thing you've just clicked. Like I said, you can just leave the setting on the Default Show Player. As I said before, this Default Show Player is not the other Whole Show Player you've been embedding, this is a different single episode player. Or, if you want to use your customized player with the branding and color changes you made in the Manage Show Player section, you can choose it by clicking Default Show Player - a menu will pop up and you can choose your own player. That will change the embed code, and you can copy that. Rupert On 9-Mar-09, at 1:15 PM, sweetmagnoliasstudio wrote: --- In videoblogging@yahoogroups.com, Rupert rupert@ wrote: Hi Rupert ..Thanks for taking the time to help. I have went over your directions and I guess I must have a hole in my head ..LOL because I still can't get it to work ..so let me answer your questions and then tell you what I have done thus far. 1. Yes I just want to add 1 video for each segment. 2 . Yes I am talking about embedding seperate single videos using a customized player. So I did what you said and I went to my Dashobard and click on see all your posts ..My 4 videos showed up ..I then clicked on 1 of them and as you said on the right side clicked on embed ..then the box next to it had the options show player ..legacy player ...or wordpress.com ...I left it on show player ... then the only option under the code is Edit Player Customizations ..when you click on this it takes you back to the manage Show Player page Where I chose all the individual options for each page that I wanted. In General I added my name * clicked on Single Episode * and unchecked the share and embed option In branding I added my own name and left the blip Url Guide I had no clue so I left it checked Use this guide Colors I chose my colors Features I unchecked the share and embed code and in the preview section the player is correct but it isn't showing the video segment that I clicked on to begin with. O.k. that is where I am at ...I'm am sorry to be so naive about this ..It sure seems like a very simple process ..so I feel so stupid not getting this. I can't tell you how much I appreciate your help .. Sara Hi Sarah - welcome :) I use custom Blip players a lot. I think when you say Segments, you just mean 1 video for each segment, yes? You're talking about embedding separate single videos using your customised player? The trick is not to embed
[videoblogging] Re: manage Show Player
--- In videoblogging@yahoogroups.com, Jay dedman jay.ded...@... wrote: O.k. I am giving an online class ..where I need to insert individual segments. So I have 4 segements uploaded. And when I go to My Show ..and click on the segment I want the Copy and Paste code for ..It gives me obviously ..the default player. So I saw that you can customize the player just under the Code ..and I went over and customized each section and saved it. But I still can't get each segment ..to have the customized player. So I know there must be a setting that I need to change ..However I must be missing it because I have played with all the setting for 2 days now and still can't get it to work the way I want. Im sure there will be people here to answer this question, but you can also email Blip.tv Support supp...@..., . They are good about getting back to people. Jay -- http://ryanishungry.com http://jaydedman.com 917 371 6790 Thank You Jay ..I wrote Bliptv on Thursday then again Last night and still haven't had a reply so that's why I followed their directions for help by coming to this group. But I will continue to wait for their assistance unless someone in this group can help me out sooner. As I am needing to get my videos up and running by Tuesday at the latest. Thanks for your help though ..Sara
