[weewx-user] Re: Aeris forcast with belchertown
I may try it again in a week or so and see what happens. Thanks for the update! On Monday, January 29, 2024 at 9:13:13 AM UTC-5 Dan Roman wrote: > Yes, I am. When it was failing when I manually entered the URL in a > browser I got back the following JSON response: > > {"success":false,"error":{"code":"maxhits_daily","description":"Maximum > number of daily accesses reached."},"response":[]} > > But as I said, after I waited a day or two it cleared itself up and > started working again without my needing to change anything. > > > > On Sunday, January 28, 2024 at 7:56:40 PM UTC-5 bchap...@gmail.com wrote: > >> Are you using the aeris maps? That's where I found my issue. The maps >> rack up hundreds of requests per hour and max you out real quick. I turned >> off aeris maps and now I have less than 300 hits per day. >> >> On Sunday, January 28, 2024 at 1:25:38 PM UTC-5 Dan Roman wrote: >> >>> I had this problem back in October but it cleared itself up. Never >>> determined if it was an Aeris or Blechertown problem. Didn't need to >>> change my password, delete my account, or anything. It was just a glitch >>> in the matrix I guess that went on for a couple of days and then fixed >>> itself. >>> >>> >>> On Friday, January 26, 2024 at 11:32:57 AM UTC-5 bchap...@gmail.com >>> wrote: >>> >>>> So, I've solved my problem. If you're using the aeris free account on >>>> their contributor plan, do not turn on aeris maps in the belchertown >>>> settings. I don't know what has changed on their end because I have had >>>> the same configuration for many years, but now the map will make thousands >>>> of hits per hour and they will shut you down when you exceed your allowed >>>> 5,000 hits. I turned off the aeris maps and all looks well so far. >>>> >>>> On Wednesday, January 24, 2024 at 11:08:16 PM UTC-5 bchap...@gmail.com >>>> wrote: >>>> >>>>> I've done that. Should have mentioned in original post. I've changed >>>>> my password, deleted and created a new app. My hit count reset at >>>>> 1900EST >>>>> and within an hour I was at ~600 hits, and that's with forcasting turned >>>>> off in the conf file. Aeris tech support has not been able to solve >>>>> this. >>>>> I'm thinking I may need to delete my account with them and re-create a >>>>> new >>>>> one. >>>>> >>>>> On Wednesday, January 24, 2024 at 7:38:45 PM UTC-5 bchap...@gmail.com >>>>> wrote: >>>>> >>>>>> Is anyone else having problems with aeris forcasting? For the past >>>>>> few weeks my access credits have been running out resulting in my >>>>>> webpage >>>>>> not being updated. I've turned off forcasting in weewx.conf and when I >>>>>> watch my activity on aeris the hits keep coming. I don't know who is >>>>>> making these requests. My aeris credits are racking up at an average of >>>>>> a >>>>>> few hundred an hour, even with forcasting turned off. I've contacted >>>>>> aeris >>>>>> tech support which has not been helpful. >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/85aab959-b95a-4438-ae5e-bb9f11b3325an%40googlegroups.com.
[weewx-user] Re: Aeris forcast with belchertown
Yes, I know this. The aeris map is an option. I chose this option because they provide a better looking map. I have since reverted to the windy map. On Monday, January 29, 2024 at 12:23:18 PM UTC-5 MikeQ wrote: > The latest version of the Belchertown skin v1.3.1 recommends using > windy.com for maps: > >- Q: Do I have to use the radar? >- A: Nope! If you leave it disabled you'll just have a big blank box >on the website. But windy.com provides a free animated radar, so why >not include it? :) > > https://github.com/poblabs/weewx-belchertown > > On Monday, January 29, 2024 at 7:13:13 AM UTC-7 Dan Roman wrote: > >> Yes, I am. When it was failing when I manually entered the URL in a >> browser I got back the following JSON response: >> >> {"success":false,"error":{"code":"maxhits_daily","description":"Maximum >> number of daily accesses reached."},"response":[]} >> >> But as I said, after I waited a day or two it cleared itself up and >> started working again without my needing to change anything. >> >> >> >> On Sunday, January 28, 2024 at 7:56:40 PM UTC-5 bchap...@gmail.com wrote: >> >>> Are you using the aeris maps? That's where I found my issue. The maps >>> rack up hundreds of requests per hour and max you out real quick. I turned >>> off aeris maps and now I have less than 300 hits per day. >>> >>> On Sunday, January 28, 2024 at 1:25:38 PM UTC-5 Dan Roman wrote: >>> >>>> I had this problem back in October but it cleared itself up. Never >>>> determined if it was an Aeris or Blechertown problem. Didn't need to >>>> change my password, delete my account, or anything. It was just a glitch >>>> in the matrix I guess that went on for a couple of days and then fixed >>>> itself. >>>> >>>> >>>> On Friday, January 26, 2024 at 11:32:57 AM UTC-5 bchap...@gmail.com >>>> wrote: >>>> >>>>> So, I've solved my problem. If you're using the aeris free account on >>>>> their contributor plan, do not turn on aeris maps in the belchertown >>>>> settings. I don't know what has changed on their end because I have had >>>>> the same configuration for many years, but now the map will make >>>>> thousands >>>>> of hits per hour and they will shut you down when you exceed your allowed >>>>> 5,000 hits. I turned off the aeris maps and all looks well so far. >>>>> >>>>> On Wednesday, January 24, 2024 at 11:08:16 PM UTC-5 bchap...@gmail.com >>>>> wrote: >>>>> >>>>>> I've done that. Should have mentioned in original post. I've >>>>>> changed my password, deleted and created a new app. My hit count reset >>>>>> at >>>>>> 1900EST and within an hour I was at ~600 hits, and that's with >>>>>> forcasting >>>>>> turned off in the conf file. Aeris tech support has not been able to >>>>>> solve >>>>>> this. I'm thinking I may need to delete my account with them and >>>>>> re-create >>>>>> a new one. >>>>>> >>>>>> On Wednesday, January 24, 2024 at 7:38:45 PM UTC-5 bchap...@gmail.com >>>>>> wrote: >>>>>> >>>>>>> Is anyone else having problems with aeris forcasting? For the past >>>>>>> few weeks my access credits have been running out resulting in my >>>>>>> webpage >>>>>>> not being updated. I've turned off forcasting in weewx.conf and when I >>>>>>> watch my activity on aeris the hits keep coming. I don't know who is >>>>>>> making these requests. My aeris credits are racking up at an average >>>>>>> of a >>>>>>> few hundred an hour, even with forcasting turned off. I've contacted >>>>>>> aeris >>>>>>> tech support which has not been helpful. >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/7459b93e-aaa6-4d14-9608-81884cd9944dn%40googlegroups.com.
[weewx-user] Re: Aeris forcast with belchertown
Are you using the aeris maps? That's where I found my issue. The maps rack up hundreds of requests per hour and max you out real quick. I turned off aeris maps and now I have less than 300 hits per day. On Sunday, January 28, 2024 at 1:25:38 PM UTC-5 Dan Roman wrote: > I had this problem back in October but it cleared itself up. Never > determined if it was an Aeris or Blechertown problem. Didn't need to > change my password, delete my account, or anything. It was just a glitch > in the matrix I guess that went on for a couple of days and then fixed > itself. > > > On Friday, January 26, 2024 at 11:32:57 AM UTC-5 bchap...@gmail.com wrote: > >> So, I've solved my problem. If you're using the aeris free account on >> their contributor plan, do not turn on aeris maps in the belchertown >> settings. I don't know what has changed on their end because I have had >> the same configuration for many years, but now the map will make thousands >> of hits per hour and they will shut you down when you exceed your allowed >> 5,000 hits. I turned off the aeris maps and all looks well so far. >> >> On Wednesday, January 24, 2024 at 11:08:16 PM UTC-5 bchap...@gmail.com >> wrote: >> >>> I've done that. Should have mentioned in original post. I've changed >>> my password, deleted and created a new app. My hit count reset at 1900EST >>> and within an hour I was at ~600 hits, and that's with forcasting turned >>> off in the conf file. Aeris tech support has not been able to solve this. >>> I'm thinking I may need to delete my account with them and re-create a new >>> one. >>> >>> On Wednesday, January 24, 2024 at 7:38:45 PM UTC-5 bchap...@gmail.com >>> wrote: >>> >>>> Is anyone else having problems with aeris forcasting? For the past few >>>> weeks my access credits have been running out resulting in my webpage not >>>> being updated. I've turned off forcasting in weewx.conf and when I watch >>>> my activity on aeris the hits keep coming. I don't know who is making >>>> these requests. My aeris credits are racking up at an average of a few >>>> hundred an hour, even with forcasting turned off. I've contacted aeris >>>> tech support which has not been helpful. >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/414aa36a-725a-4c51-ad15-ed4241f12505n%40googlegroups.com.
[weewx-user] Re: Aeris forcast with belchertown
So, I've solved my problem. If you're using the aeris free account on their contributor plan, do not turn on aeris maps in the belchertown settings. I don't know what has changed on their end because I have had the same configuration for many years, but now the map will make thousands of hits per hour and they will shut you down when you exceed your allowed 5,000 hits. I turned off the aeris maps and all looks well so far. On Wednesday, January 24, 2024 at 11:08:16 PM UTC-5 bchap...@gmail.com wrote: > I've done that. Should have mentioned in original post. I've changed my > password, deleted and created a new app. My hit count reset at 1900EST and > within an hour I was at ~600 hits, and that's with forcasting turned off in > the conf file. Aeris tech support has not been able to solve this. I'm > thinking I may need to delete my account with them and re-create a new > one. > > On Wednesday, January 24, 2024 at 7:38:45 PM UTC-5 bchap...@gmail.com > wrote: > >> Is anyone else having problems with aeris forcasting? For the past few >> weeks my access credits have been running out resulting in my webpage not >> being updated. I've turned off forcasting in weewx.conf and when I watch >> my activity on aeris the hits keep coming. I don't know who is making >> these requests. My aeris credits are racking up at an average of a few >> hundred an hour, even with forcasting turned off. I've contacted aeris >> tech support which has not been helpful. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1bf1bb9e-8774-4b4f-a9c5-1fb3eaab4be0n%40googlegroups.com.
[weewx-user] Re: Aeris forcast with belchertown
I've done that. Should have mentioned in original post. I've changed my password, deleted and created a new app. My hit count reset at 1900EST and within an hour I was at ~600 hits, and that's with forcasting turned off in the conf file. Aeris tech support has not been able to solve this. I'm thinking I may need to delete my account with them and re-create a new one. On Wednesday, January 24, 2024 at 7:38:45 PM UTC-5 bchap...@gmail.com wrote: > Is anyone else having problems with aeris forcasting? For the past few > weeks my access credits have been running out resulting in my webpage not > being updated. I've turned off forcasting in weewx.conf and when I watch > my activity on aeris the hits keep coming. I don't know who is making > these requests. My aeris credits are racking up at an average of a few > hundred an hour, even with forcasting turned off. I've contacted aeris > tech support which has not been helpful. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/81cd0958-11b9-41ec-9ad4-e225751a18e8n%40googlegroups.com.
[weewx-user] Aeris forcast with belchertown
Is anyone else having problems with aeris forcasting? For the past few weeks my access credits have been running out resulting in my webpage not being updated. I've turned off forcasting in weewx.conf and when I watch my activity on aeris the hits keep coming. I don't know who is making these requests. My aeris credits are racking up at an average of a few hundred an hour, even with forcasting turned off. I've contacted aeris tech support which has not been helpful. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8787f686-28fb-4373-9537-5127901fee78n%40googlegroups.com.
[weewx-user] Re: Belchertown Radar
I don't have aeris_map = 1 I will give this a try. Thanks! On Wednesday, March 2, 2022 at 6:22:16 PM UTC-5 bchap...@gmail.com wrote: > radar_html = "" > > On Sunday, February 27, 2022 at 6:56:04 AM UTC-5 DaveStLou wrote: > >> What do you have under [Extras] for radar_html = ""? >> >> On Saturday, February 26, 2022 at 9:29:20 AM UTC-6 kk44...@gmail.com >> wrote: >> >>> You can create an index_radar.inc file to include whatever you want >>> instead of the radar image. Or you can set radar_html in skin.conf. >>> >>> bchap...@gmail.com schrieb am Samstag, 26. Februar 2022 um 15:36:46 >>> UTC+1: >>> >>>> from everything I have read, it should be off by defaultI haven't >>>> turned it on, however it is on. I want to display on a browser that >>>> doesn't support WebGL. >>>> >>>> >>>> On Saturday, February 26, 2022 at 8:31:24 AM UTC-5 bchap...@gmail.com >>>> wrote: >>>> >>>>> How do I turn off the radar display in belchertown? >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/283893c0-4db8-4eeb-88f6-98f02e743c0cn%40googlegroups.com.
[weewx-user] Re: Belchertown Radar
radar_html = "" On Sunday, February 27, 2022 at 6:56:04 AM UTC-5 DaveStLou wrote: > What do you have under [Extras] for radar_html = ""? > > On Saturday, February 26, 2022 at 9:29:20 AM UTC-6 kk44...@gmail.com > wrote: > >> You can create an index_radar.inc file to include whatever you want >> instead of the radar image. Or you can set radar_html in skin.conf. >> >> bchap...@gmail.com schrieb am Samstag, 26. Februar 2022 um 15:36:46 >> UTC+1: >> >>> from everything I have read, it should be off by defaultI haven't >>> turned it on, however it is on. I want to display on a browser that >>> doesn't support WebGL. >>> >>> >>> On Saturday, February 26, 2022 at 8:31:24 AM UTC-5 bchap...@gmail.com >>> wrote: >>> >>>> How do I turn off the radar display in belchertown? >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/2a5b0365-7b3c-4024-a589-f722a399ec18n%40googlegroups.com.
[weewx-user] Re: Belchertown Radar
from everything I have read, it should be off by defaultI haven't turned it on, however it is on. I want to display on a browser that doesn't support WebGL. On Saturday, February 26, 2022 at 8:31:24 AM UTC-5 bchap...@gmail.com wrote: > How do I turn off the radar display in belchertown? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/478cd6d9-d242-498a-a2b8-53a1402ee33bn%40googlegroups.com.
[weewx-user] Belchertown Radar
How do I turn off the radar display in belchertown? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/bb0f5f8b-4662-4232-9f2d-93739a0b07e5n%40googlegroups.com.
[weewx-user] Upgrade Raspberry Pi 2 to Raspberry Pi 4
Can I just swap out the card? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c7b165f1-3dcc-4cce-9579-c7745603fd5dn%40googlegroups.com.
Re: [weewx-user] Re: Belchertown Error - Any idea what is wrong?
Ok...I changed the archive interval to 120...looks good so far. Might be time for a hardware upgrade. Thanks for the help! On Monday, November 8, 2021 at 9:07:57 PM UTC-5 vince wrote: > There is a LOT enabled on that box if you look at the logs.Long sftp > session, Windy, PWS, Wunderground, CWOP, Seasons, Rain Machine extension, > owmap, and the like. You just can't run all that stuff and a too-quick > archive interval on something as weak as a model-B. > > On Monday, November 8, 2021 at 6:03:20 PM UTC-8 gjr80 wrote: > >> And there is the crux of the issue: >> >> Nov 8 20:03:39 raspberrypi weewx[6055] INFO weewx.engine: Using archive >> interval of 60 seconds (software record generation) >> >> Lesser RPis are just fine when used with a reasonable archive interval. >> Cutting it to the minimum 60 seconds is asking for trouble. >> >> Gary >> >> On Tuesday, 9 November 2021 at 11:56:10 UTC+10 tke...@gmail.com wrote: >> >>> There are lots of ways this can happen. Things to try (or, at least, >>> think about): >>> >>> 1. I would think that an RPi2 would be enough to run WeeWX + >>> Belchertown. Check by running a tool such as htop or top. How busy is the >>> processor? >>> >>> Along the same line, what is your archive interval? If it is short (1 >>> minute), and your reports are complex, it is possible you are asking too >>> much of an RPi2. >>> >>> 2. Database locked errors can be as simple as having an open instance of >>> sqlite3 or SQLite DB Browser, which are contending for the locks. Running >>> weewxd and another weewx utility simultaneously can cause this. You can >>> check to see if more than one process is using the database by using the >>> "fuser" command: >>> >>> fuser -v /var/lib/weewx/weewx.sdb >>> >>> 3. Older versions of the underlying "C" library would wait for a full >>> second if the database was locked. It wouldn't take too many attempts to >>> exceed the typical 5 second timeout limit. However, I think this has been >>> fixed in newer versions. Still, it's worth an "apt update", followed by >>> "apt upgrade" to be sure you're up to date. >>> >>> 4. I am not very familiar with the Belchertown skin, so it's possible >>> that it's creating this problem internally by holding open two connections >>> simultaneously, without an intervening commit. Don't know. >>> >>> 5. It's also possible that your SD card is failing, and SQLite is >>> struggling to finalize the commits, leading to lock contention. The tool >>> fsck can help to determine the health of your card. Use the utility "top", >>> and look at the "wa" field (2nd line) while WeeWX is generating reports. >>> >>> >>> >>> >>> >>> On Mon, Nov 8, 2021 at 5:21 PM Doug Jenkins >>> wrote: >>> >>>> Rpi2 with the latest O/S version is probably not enough to run both >>>> belchertown and weewx together. Especially if you have a lot of archive >>>> records to generate the NOAA reports on the first go. >>>> >>>> The RPI 4 is readily available and will be a good investment for a >>>> nominal fee. It has at least 2GB (vs 512mb) of RAM and a 4 core processor >>>> instead of the single core Broadcom chip that came on that pi. >>>> >>>> The bus is a lot better for I/O and you will have a lot less of an >>>> issue with SD card corruption with RPi4 than with RPi2. >>>> >>>> Trust me, I started my weewx 3.x site 3 years ago in on a RPi 2 and >>>> struggled with stability with the pi itself. Now I run on a RPi4 with a >>>> portable SSD drive to store my data with no issues. >>>> >>>> Just my $0.02 >>>> >>>> >>>> >>>> On Mon, Nov 8, 2021, 8:02 PM vince wrote: >>>> >>>>> I bet if you turn Belchertown off (temporarily) and enable just the >>>>> Standard or Seasons skin that it'll work just fine. >>>>> >>>>> Sometimes you need to throw more compute at the problem. >>>>> >>>>> On Monday, November 8, 2021 at 4:40:00 PM UTC-8 bchap...@gmail.com >>>>> wrote: >>>>> >>>>>> Raspberry Pi 2 with raspbian buster >>>>>> >>>>>> This runs in a cycle of approximately every 6 minutes.
Re: [weewx-user] Re: Belchertown Error - Any idea what is wrong?
wh51_ch1_batt', 'wh51_ch1_sig': 'wh51_ch1_sig', 'wh51_ch2_batt': 'wh51_ch2_batt', 'wh51_ch2_sig': 'wh51_ch2_sig', 'wh51_ch3_batt': 'wh51_ch3_batt', 'wh51_ch3_sig': 'wh51_ch3_sig', 'wh51_ch4_batt': 'wh51_ch4_batt', 'wh51_ch4_sig': 'wh51_ch4_sig', 'wh51_ch5_batt': 'wh51_ch5_batt', 'wh51_ch5_sig': 'wh51_ch5_sig', 'wh51_ch6_batt': 'wh51_ch6_batt', 'wh51_ch6_sig': 'wh51_ch6_sig', 'wh51_ch7_batt': 'wh51_ch7_batt', 'wh51_ch7_sig': 'wh51_ch7_sig', 'wh51_ch8_batt': 'wh51_ch8_batt', 'wh51_ch8_sig': 'wh51_ch8_sig', 'wh51_ch9_batt': 'wh51_ch9_batt', 'wh51_ch9_sig': 'wh51_ch9_sig', 'wh51_ch10_batt': 'wh51_ch10_batt', 'wh51_ch10_sig': 'wh51_ch10_sig', 'wh51_ch11_batt': 'wh51_ch11_batt', 'wh51_ch11_sig': 'wh51_ch11_sig', 'wh51_ch12_batt': 'wh51_ch12_batt', 'wh51_ch12_sig': 'wh51_ch12_sig', 'wh51_ch13_batt': 'wh51_ch13_batt', 'wh51_ch13_sig': 'wh51_ch13_sig', 'wh51_ch14_batt': 'wh51_ch14_batt', 'wh51_ch14_sig': 'wh51_ch14_sig', 'wh51_ch15_batt': 'wh51_ch15_batt', 'wh51_ch15_sig': 'wh51_ch15_sig', 'wh51_ch16_batt': 'wh51_ch16_batt', 'wh51_ch16_sig': 'wh51_ch16_sig', 'wh55_ch1_batt': 'wh55_ch1_batt', 'wh55_ch1_sig': 'wh55_ch1_sig', 'wh55_ch2_batt': 'wh55_ch2_batt', 'wh55_ch2_sig': 'wh55_ch2_sig', 'wh55_ch3_batt': 'wh55_ch3_batt', 'wh55_ch3_sig': 'wh55_ch3_sig', 'wh55_ch4_batt': 'wh55_ch4_batt', 'wh55_ch4_sig': 'wh55_ch4_sig', 'wh57_batt': 'wh57_batt', 'wh57_sig': 'wh57_sig', 'wh65_batt': 'wh65_batt', 'wh65_sig': 'wh65_sig', 'wh68_batt': 'wh68_batt', 'wh68_sig': 'wh68_sig', 'windchill': 'windchill', 'windDir': 'winddir', 'windGust': 'gustspeed', 'windSpeed': 'windspeed', 'ws80_batt': 'ws80_batt', 'ws80_sig': 'ws80_sig', 'yearRain': 'rainyear'} Nov 8 20:15:28 raspberrypi weewx[6055] INFO user.gw1000: driver version is 0.4.1 Nov 8 20:15:28 raspberrypi weewx[6055] INFO user.gw1000: GW1000 address is 192.168.20.222:45000 Nov 8 20:15:28 raspberrypi weewx[6055] INFO user.gw1000: poll interval is 15 seconds Nov 8 20:15:28 raspberrypi weewx[6055] INFO weewx.engine: StdConvert target unit is 0x1 Nov 8 20:15:28 raspberrypi weewx[6055] INFO weewx.engine: Archive will use data binding wx_binding Nov 8 20:15:28 raspberrypi weewx[6055] INFO weewx.engine: Record generation will be attempted in 'software' On Monday, November 8, 2021 at 8:18:47 PM UTC-5 gjr80 wrote: > Would like to see a more extensive log extract, I wouldn’t have though a > RPi2 would have that much of a problem with just WeeWX and Belchertown > using a GW1000. > > Gary > > On Tuesday, 9 November 2021 at 11:02:35 UTC+10 vince wrote: > >> I bet if you turn Belchertown off (temporarily) and enable just the >> Standard or Seasons skin that it'll work just fine. >> >> Sometimes you need to throw more compute at the problem. >> >> On Monday, November 8, 2021 at 4:40:00 PM UTC-8 bchap...@gmail.com wrote: >> >>> Raspberry Pi 2 with raspbian buster >>> >>> This runs in a cycle of approximately every 6 minutes. Nothing else >>> running on this machine. >>> >>> On Monday, November 8, 2021 at 7:35:14 PM UTC-5 tke...@gmail.com wrote: >>> >>>> Yes, tell us what computer you are using. Also, the operating system >>>> and version. >>>> >>>> On Mon, Nov 8, 2021 at 4:32 PM vince wrote: >>>> >>>>> Your database is locked :-) >>>>> >>>>> Typically this is when you're trying to do too much too fast on a very >>>>> slow box like a pi-zero or the like. >>>>> >>>>> On Monday, November 8, 2021 at 4:06:48 PM UTC-8 bchap...@gmail.com >>>>> wrote: >>>>> >>>>>> Nov 8 18:53:35 raspberrypi weewx[5618] INFO weewx.engine: Main loop >>>>>> exiting. Shutting engine down. >>>>>> Nov 8 18:53:35 raspberrypi weewx[5618] INFO weewx.engine: Shutting >>>>>> down StdReport thread >>>>>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: >>>>>> Caught unrecoverable exception in generator >>>>>> 'user.belchertown.HighchartsJsonGenerator' >>>>>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>>>>> weewx.reportengine: database is locked >>>>>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>>>>> weewx.reportengine: Traceback (most recent call last): >>>>>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>>>>> weewx.reportengine: File >>>>>> "/usr/share/weewx/weedb/sqlite.py", line 30, in guarded_fn >>>>>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>>>>> weewx.reportengine:
Re: [weewx-user] Re: Belchertown Error - Any idea what is wrong?
Raspberry Pi 2 with raspbian buster This runs in a cycle of approximately every 6 minutes. Nothing else running on this machine. On Monday, November 8, 2021 at 7:35:14 PM UTC-5 tke...@gmail.com wrote: > Yes, tell us what computer you are using. Also, the operating system and > version. > > On Mon, Nov 8, 2021 at 4:32 PM vince wrote: > >> Your database is locked :-) >> >> Typically this is when you're trying to do too much too fast on a very >> slow box like a pi-zero or the like. >> >> On Monday, November 8, 2021 at 4:06:48 PM UTC-8 bchap...@gmail.com wrote: >> >>> Nov 8 18:53:35 raspberrypi weewx[5618] INFO weewx.engine: Main loop >>> exiting. Shutting engine down. >>> Nov 8 18:53:35 raspberrypi weewx[5618] INFO weewx.engine: Shutting down >>> StdReport thread >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Caught >>> unrecoverable exception in generator >>> 'user.belchertown.HighchartsJsonGenerator' >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: database is locked >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: Traceback (most recent call last): >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weedb/sqlite.py", line 30, in guarded_fn >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: return fn(*args, **kwargs) >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weedb/sqlite.py", line 219, in execute >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: return sqlite3.Cursor.execute(self, >>> *args, **kwargs) >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: sqlite3.OperationalError: database is >>> locked >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: During handling of the above exception, >>> another exception occurred: >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: Traceback (most recent call last): >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weewx/reportengine.py", line 196, in run >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: obj.start() >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weewx/reportengine.py", line 281, in start >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: self.run() >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/user/belchertown.py", line 1550, in run >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: start_ts = archive.firstGoodStamp() >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weewx/manager.py", line 247, in firstGoodStamp >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: _row = self.getSql("SELECT >>> MIN(dateTime) FROM %s" % self.table_name) >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weewx/manager.py", line 449, in getSql >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: _cursor.execute(sql, sqlargs) >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: File >>> "/usr/share/weewx/weedb/sqlite.py", line 44, in guarded_fn >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: raise weedb.OperationalError(e) >>> Nov 8 18:53:44 raspberrypi weewx[5618] ERROR >>> weewx.reportengine: weedb.OperationalError: database is locked >>>
[weewx-user] Belchertown Error - Any idea what is wrong?
Nov 8 18:53:35 raspberrypi weewx[5618] INFO weewx.engine: Main loop exiting. Shutting engine down. Nov 8 18:53:35 raspberrypi weewx[5618] INFO weewx.engine: Shutting down StdReport thread Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Caught unrecoverable exception in generator 'user.belchertown.HighchartsJsonGenerator' Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: database is locked Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Traceback (most recent call last): Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weedb/sqlite.py", line 30, in guarded_fn Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: return fn(*args, **kwargs) Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weedb/sqlite.py", line 219, in execute Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: return sqlite3.Cursor.execute(self, *args, **kwargs) Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: sqlite3.OperationalError: database is locked Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: During handling of the above exception, another exception occurred: Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Traceback (most recent call last): Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weewx/reportengine.py", line 196, in run Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: obj.start() Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weewx/reportengine.py", line 281, in start Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: self.run() Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/user/belchertown.py", line 1550, in run Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: start_ts = archive.firstGoodStamp() Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weewx/manager.py", line 247, in firstGoodStamp Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: _row = self.getSql("SELECT MIN(dateTime) FROM %s" % self.table_name) Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weewx/manager.py", line 449, in getSql Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: _cursor.execute(sql, sqlargs) Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: File "/usr/share/weewx/weedb/sqlite.py", line 44, in guarded_fn Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: raise weedb.OperationalError(e) Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: weedb.OperationalError: database is locked Nov 8 18:53:44 raspberrypi weewx[5618] ERROR weewx.reportengine: Generator terminated Nov 8 18:53:45 raspberrypi weewx[5618] INFO user.gw1000: Gw1000Collector thread has been terminated Nov 8 18:53:45 raspberrypi weewx[5618] CRITICAL __main__: Database OperationalError exception: database is locked Nov 8 18:53:45 raspberrypi weewx[5618] CRITICAL __main__: Waiting 2 minutes then retrying... Nov 8 18:55:45 raspberrypi weewx[5618] INFO __main__: retrying... -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/eb3c3a30-f13d-44cf-b859-f90bec27f7f1n%40googlegroups.com.
[weewx-user] Re: Sky Cover data to pwsweather.com
Gary, Thanks for your research on this. I didn't know it there was some way of calculating this data in weewx and posting that I was missing. I'm attempting to like the AerisPulse app but when the conditions they report to me are ~15 degrees different, it's difficult to do. On the morning of January 30th, my station was reporting a current temp of -15.2, Aeris was reporting -2 for the same zip code. It's hard to support or recommend an app with that much error. And thanks for the explaination on the missing posts. I kept getting a message that the post was deleted as soon as I posted it. I ended up sending it through email. On Thursday, February 18, 2021 at 11:39:41 PM UTC-5 gjr80 wrote: > Oh, and I forgot to mention. Your missing six messages found their way > into the spam folder, Groups seems to have a habit of randomly doing this > sometimes. I don't know why, especially when your seventh attempt worked! > In any case I deleted them, could not see the point of letting them through > now. > > Gary > > > On Friday, 19 February 2021 at 14:36:18 UTC+10 gjr80 wrote: > >> So the question started as why you weren't seeing your data on an Aeris >> app and the answer was that only those stations that provide sky coverage >> were showing their data on the Aeris app. Subsequently, your question to us >> was how to I submit sky coverage data to PWS Weather. Fair question given >> the AerisWeather response, but as explained earlier this is not possible. >> The issue of a missing link raised by subsequent posts I suspect is largely >> irrelevant, the context of that para from AerisWeather Support was that as >> a PWS contributor you have free access to your data via the AerisWeather >> API. Somehow I don't think that was intended as a solution to getting your >> data to appear on the Aeris app but rather giving you a means to access >> your data (just like the WeatherUnderground API gives you access to your >> data) once you register on AerisWeather and link to your PWS account. >> >> In terms of sky coverage I did a bit of browsing on the PWS Weather >> station map last night and found that when looking at the METAR station at >> our international airport there was indeed a sky coverage plot. When I >> looked at PWS stations nearby the airport they too had a sky coverage plot >> and it was identical in every respect to the METAR sky coverage plot. >> However, once I was too far away from the METAR station (some 15-20km as >> the crow flies) the PWS stations all had no sky coverage plot. I think this >> tends to indicate that PWS stations on the station map are in fact >> obtaining sky coverage by virtue of their proximity to a METAR station >> rather than providing the data themselves. PWS Weather/Aeris may well >> mention this somewhere but I am yet to find it. >> >> I think in terms of WeeWX and PWS Weather there is nothing further to be >> done. The WeeWX PWS Weather uploader uploads the correct data, albeit with >> no data in the 'weather' field (if someone comes along with an extension to >> WeeWX that includes suitable data for the 'weather' field then we can >> certainly extend the PWS Weather uploader to include that data). >> >> Gary >> On Thursday, 18 February 2021 at 20:41:18 UTC+10 bchap...@gmail.com >> wrote: >> >>> This is the response I got from Aeris when I asked them why I wasn't >>> seeing my own data in "Current Conditions" in the AerisPulse app: >>> >>> * >>> >>> Nate Flohrs (AerisWeather Support) >>> Feb 1, 2021, 9:40 AM CST >>> >>> Hi Bruce, >>> >>> Thanks for reaching out to AerisWeather! For the purposes of providing >>> complete weather data, the Aeris Pulse app is currently designed to only >>> return stations that provide sky coverage information. In your location, >>> the nearest station that provides those details is several miles away, >>> which is why you are seeing those results. >>> >>> If you haven't already, you may want to go to settings > data options >>> and select "All" as the observations source. This will ensure that the >>> closest station that provides sky data will be utilized. >>> >>> There is an alternative solution that may help you access the data >>> coming specifically from your station. Because you are a PWS contributor, >>> you are eligible for the contributor plan from AerisWeather. It allows you >>> to access weather data through our API for no cost while your
[weewx-user] Re: Sky Cover data to pwsweather.com
This is the response I got from Aeris when I asked them why I wasn't seeing my own data in "Current Conditions" in the AerisPulse app: * Nate Flohrs (AerisWeather Support) Feb 1, 2021, 9:40 AM CST Hi Bruce, Thanks for reaching out to AerisWeather! For the purposes of providing complete weather data, the Aeris Pulse app is currently designed to only return stations that provide sky coverage information. In your location, the nearest station that provides those details is several miles away, which is why you are seeing those results. If you haven't already, you may want to go to settings > data options and select "All" as the observations source. This will ensure that the closest station that provides sky data will be utilized. There is an alternative solution that may help you access the data coming specifically from your station. Because you are a PWS contributor, you are eligible for the contributor plan from AerisWeather. It allows you to access weather data through our API for no cost while your station is sending information to our servers. You can find more details here. Hopefully that helps to explain the behavior you are seeing! If you have any additional questions, please let me know. Thanks, Nate AerisWeather Support Team https://support.aerisweather.com On Wednesday, February 17, 2021 at 10:11:44 PM UTC-5 gjr80 wrote: > I should add my comments re METAR is my supposition; the observation > related fields (as distinct from API keys, date-times, software name etc) > in the PWS Weather upload string format are: > > wind direction > wind speed > wind gust speed > temperature > hour rainfall > day rainfall > month rainfall > year rainfall > barometric pressure > dew point > humidity > solar radiation > UV > > and of course the previously mentioned 'weather' field. Provided your > station has the appropriate sensor WeeWX will upload all of these to PWS > Weather with the exception of month rainfall and year rainfall. > > Of course the other possibility is that PWS Weather could be deriving 'sky > cover' itself though, I see no obvious source in the above fields though. > Probably a question for PWS Weather, and if their answer is 'your station > needs to upload it' then ask for some documentation; details of the field > name, content, format etc because it does not appear in their PWS upload > documentation they sent to me. > > Gary > > > > On Thursday, 18 February 2021 at 12:38:02 UTC+10 bchap...@gmail.com wrote: > >> Thank you for the explanation. I incorrectly thought that cloudcover was >> the data expected by pwsweather. Now that I see that it is more involved, >> I will wait patiently. The reason for my interest is that the AerisPulse >> app gives me data from a station many miles from me when I am reporting >> data to them. Their explanation is that they only use data from stations >> that report Sky Cover data. All others are ignored. >> >> Again, thanks for the explanation. >> >> >> On Wednesday, February 17, 2021 at 7:53:39 PM UTC-5 gjr80 wrote: >> >>> Hi, >>> >>> Short answer is the WeeWX PWSWeather uploader does not support any form >>> of 'sky cover percentage'. >>> >>> In looking at the upload string format recently provided by PWSWeather >>> the only field I can see that might support 'sky cover percentage' is the >>> 'weather' field which is described as ' Current weather or sky conditions >>> using standard METAR abbreviations and intensity (e.g. -RA, +SN, SKC, >>> etc.)'. I expect you could include cloud coverage in octas in this somehow, >>> but I am no METAR expert. The WeeWX PWSWeather uploader does not support >>> the weather field and there is so simple config change available to the >>> user make it do so. It would involve writing code. I do have a task to >>> review the various uploaders included in the WeeWX core, but that is >>> somewhat on the back burner at present and since WeeWX does not >>> provide/generate METAR info per se, I am not sure whether that review would >>> result in the WeeWX PWSWeather uploader supporting the 'weather' field. >>> >>> As Vince said I am intrigued as to what data it is that you want to >>> upload. I am not aware of the GW1000 emitting any sort of cloud cover data, >>> either via its API or through any of its weather service upload formats. >>> You mention cloudbase, WeeWX will certainly calculate cloudbase provided >>> the pre-requisite data is available (fields outTemp and outHumidity) but >>> cloudbase
[weewx-user] Re: Sky Cover data to pwsweather.com
Thank you for the explanation. I incorrectly thought that cloudcover was the data expected by pwsweather. Now that I see that it is more involved, I will wait patiently. The reason for my interest is that the AerisPulse app gives me data from a station many miles from me when I am reporting data to them. Their explanation is that they only use data from stations that report Sky Cover data. All others are ignored. Again, thanks for the explanation. On Wednesday, February 17, 2021 at 7:53:39 PM UTC-5 gjr80 wrote: > Hi, > > Short answer is the WeeWX PWSWeather uploader does not support any form of > 'sky cover percentage'. > > In looking at the upload string format recently provided by PWSWeather the > only field I can see that might support 'sky cover percentage' is the > 'weather' field which is described as ' Current weather or sky conditions > using standard METAR abbreviations and intensity (e.g. -RA, +SN, SKC, > etc.)'. I expect you could include cloud coverage in octas in this somehow, > but I am no METAR expert. The WeeWX PWSWeather uploader does not support > the weather field and there is so simple config change available to the > user make it do so. It would involve writing code. I do have a task to > review the various uploaders included in the WeeWX core, but that is > somewhat on the back burner at present and since WeeWX does not > provide/generate METAR info per se, I am not sure whether that review would > result in the WeeWX PWSWeather uploader supporting the 'weather' field. > > As Vince said I am intrigued as to what data it is that you want to > upload. I am not aware of the GW1000 emitting any sort of cloud cover data, > either via its API or through any of its weather service upload formats. > You mention cloudbase, WeeWX will certainly calculate cloudbase provided > the pre-requisite data is available (fields outTemp and outHumidity) but > cloudbase is only a theoretical value for the cloud height; it does not in > any way relate to percentage cloud cover. > > Gary > On Thursday, 18 February 2021 at 10:30:50 UTC+10 bchap...@gmail.com wrote: > >> I don't know. I don't think it has anything to do with Belchertown. >> pwsweather is looking for sky cover percentage. I know that a few stations >> report this and I'm wondering how it is done. All other data is >> reporting. My data is calculating cloud base however, pwsweather is >> looking for a percentage. Any ideas? >> >> >> On Wednesday, February 17, 2021 at 5:59:44 PM UTC-5 vince wrote: >> >>> On Wednesday, February 17, 2021 at 1:35:41 PM UTC-8 bchap...@gmail.com >>> wrote: >>> >>>> I’m sending data to pwsweather.com using a GW1000 and I can’t figure >>>> out how to send Sky Cover data. conf file below >>>> >>>> >>> Which element in which database has that data to begin with ? >>> I'm sure not seeing it. >>> >>> Are you sure it's not something calculated magically by Belchertown and >>> not actually saved in a db by weewx ? >>> >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/6f04ad2a-9fbf-44d2-a8f7-fe7ffef21d3an%40googlegroups.com.
[weewx-user] Re: Sky Cover data to pwsweather.com
I don't know. I don't think it has anything to do with Belchertown. pwsweather is looking for sky cover percentage. I know that a few stations report this and I'm wondering how it is done. All other data is reporting. My data is calculating cloud base however, pwsweather is looking for a percentage. Any ideas? On Wednesday, February 17, 2021 at 5:59:44 PM UTC-5 vince wrote: > On Wednesday, February 17, 2021 at 1:35:41 PM UTC-8 bchap...@gmail.com > wrote: > >> I’m sending data to pwsweather.com using a GW1000 and I can’t figure out >> how to send Sky Cover data. conf file below >> >> > Which element in which database has that data to begin with ? > I'm sure not seeing it. > > Are you sure it's not something calculated magically by Belchertown and > not actually saved in a db by weewx ? > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/911ba3be-3364-41fc-b6b6-d1cf816929cbn%40googlegroups.com.
[weewx-user] Sky Cover data to pwsweather
Would someone please explain how to send sky cover data to pwsweather. I've been searching this group all weekend without results. Thanks! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9a50077a-6ec6-49fa-9e15-a60e733a663cn%40googlegroups.com.