Re: [weewx-user] Davis VP 2 and raw data with weewx 3.9.2-1

[Ernest Jillson]

Thanks!

On Sat, Mar 21, 2020 at 4:00 PM Thomas Keffer  wrote:

> The data emitted by a Davis Vantage is in coded binary. It would look like
> gibberish.
>
> The data that is printed by weewxd when run from the command line is
> fairly raw. I say "fairly" because StdWXCalculate may have added some
> values to it. However, if you set all the options in
> [StdWXCalculate]/[[Calculations]]
>  to 'hardware',
> then it will just pass the hardware values along.
>
>
>
> On Sat, Mar 21, 2020 at 10:59 AM Ernest Jillson 
> wrote:
>
>> Is there a way to save off the raw data exactly as it comes out of the
>> data logger? I'm having an issue with wind direction using an ultrasonic
>> anemometer. I understand when there is no wind, it probably can't give a
>> direction (but seems to end up defaulting to 360), but even when there is
>> wind sometimes, it is reading exactly 360 although wind direction was
>> clearly not that.
>>
>> I need to show the manufacturer "raw data" from the data logger.  It
>> can't be processed by any drivers.  Thanks
>>
>> Ernie
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/3fb89021-6bfa-42be-b184-1f0bd562e1fc%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zECqHMmmq2YUfp_gM-tUkvzVO4hdg8H2%2BxPMx6ZbCE6ndw%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAC5oUmMsKEx8wHXqunZhXc1zzqGcTPapeQA2G1ZwheU77huu9w%40mail.gmail.com.

Re: [weewx-user] Davis VP 2 and raw data with weewx 3.9.2-1

[Thomas Keffer]

The data emitted by a Davis Vantage is in coded binary. It would look like
gibberish.

The data that is printed by weewxd when run from the command line is fairly
raw. I say "fairly" because StdWXCalculate may have added some values to
it. However, if you set all the options in [StdWXCalculate]/[[Calculations]]
 to 'hardware',
then it will just pass the hardware values along.



On Sat, Mar 21, 2020 at 10:59 AM Ernest Jillson  wrote:

> Is there a way to save off the raw data exactly as it comes out of the
> data logger? I'm having an issue with wind direction using an ultrasonic
> anemometer. I understand when there is no wind, it probably can't give a
> direction (but seems to end up defaulting to 360), but even when there is
> wind sometimes, it is reading exactly 360 although wind direction was
> clearly not that.
>
> I need to show the manufacturer "raw data" from the data logger.  It can't
> be processed by any drivers.  Thanks
>
> Ernie
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/3fb89021-6bfa-42be-b184-1f0bd562e1fc%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zECqHMmmq2YUfp_gM-tUkvzVO4hdg8H2%2BxPMx6ZbCE6ndw%40mail.gmail.com.

[weewx-user] Davis VP 2 and raw data with weewx 3.9.2-1

[Ernest Jillson]

Is there a way to save off the raw data exactly as it comes out of the data 
logger? I'm having an issue with wind direction using an ultrasonic 
anemometer. I understand when there is no wind, it probably can't give a 
direction (but seems to end up defaulting to 360), but even when there is 
wind sometimes, it is reading exactly 360 although wind direction was 
clearly not that.
 
I need to show the manufacturer "raw data" from the data logger.  It can't 
be processed by any drivers.  Thanks
 
Ernie

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/3fb89021-6bfa-42be-b184-1f0bd562e1fc%40googlegroups.com.