Re: [weewx-user] Davis Vantage Problem

[Steve Shuff]

Hello Thomas,
Many thanks for your input.
Having followed your advice I now have the system up and running again, I
think it must have been corrupt memory.
All sorted and many thanks.

Kind regards.

On Thu, Apr 2, 2020 at 12:21 PM Thomas Keffer  wrote:

> Things to try:
>
> 1. It's possible the the logger was disturbed when you replaced the
> batteries. Try reseating it in the Envoy.
>
> 2. Your symptoms don't quite fit the usual pattern of corrupt memory, but
> it's worth trying to clear the memory of the logger anyway. Follow the
> directions under Corrupt station memory
> 
>  to
> clear the memory.
>
> -tk
>
>
> On Thu, Apr 2, 2020 at 2:35 AM Steve Shuff  wrote:
>
>> Hi All,
>> I am hopeful someone can shed some light on this error .
>>
>> My setup consist of a RPi 3 (Raspbian) running WeeWX 3.9.2 to which is
>> connected a Davis Envoy logger, The ISS is transmitting OK as can be
>> verified on the indoor console.
>>
>> The setup runs fine until the Envoy batteries died, these were replaced
>> and the Pi rebooted and the system restarted.
>> Now my data is not being produced on the graphs etc , Upon looking at the
>> syslog I see two errors,
>>
>> Apr  2 10:12:10 raspberrypi weewx[1195]: vantage: LOOP try #1; error:
>> Expected to read 99 chars; got 0 instead
>>
>> Apr  2 10:11:56 raspberrypi weewx[1195]: vantage: DMPAFT try #2; error:
>> Unable to pass CRC16 check while sending data to Vantage console
>>
>> Has anyone experienced this problem and what was the cure ? It has done
>> it before when the batteries previously failed but I dont know what I did
>> to remedy the situation.
>> Thanks for any help.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/9b1973cc-a646-421c-85c0-44e58ece7f93%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zEB8CXqvToL7BSaRBB0Oe6SkMUGy-ggoMeh3Ym0DFLEsNw%40mail.gmail.com
> 
> .
>


-- 
Steve Shuff.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CADNpUBGN-raepuap-PUJiGmJ20M2xGK-5nJR5VTR%3D7i93uibvg%40mail.gmail.com.

Re: [weewx-user] Davis Vantage Problem

[Thomas Keffer]

Things to try:

1. It's possible the the logger was disturbed when you replaced the
batteries. Try reseating it in the Envoy.

2. Your symptoms don't quite fit the usual pattern of corrupt memory, but
it's worth trying to clear the memory of the logger anyway. Follow the
directions under Corrupt station memory

to
clear the memory.

-tk


On Thu, Apr 2, 2020 at 2:35 AM Steve Shuff  wrote:

> Hi All,
> I am hopeful someone can shed some light on this error .
>
> My setup consist of a RPi 3 (Raspbian) running WeeWX 3.9.2 to which is
> connected a Davis Envoy logger, The ISS is transmitting OK as can be
> verified on the indoor console.
>
> The setup runs fine until the Envoy batteries died, these were replaced
> and the Pi rebooted and the system restarted.
> Now my data is not being produced on the graphs etc , Upon looking at the
> syslog I see two errors,
>
> Apr  2 10:12:10 raspberrypi weewx[1195]: vantage: LOOP try #1; error:
> Expected to read 99 chars; got 0 instead
>
> Apr  2 10:11:56 raspberrypi weewx[1195]: vantage: DMPAFT try #2; error:
> Unable to pass CRC16 check while sending data to Vantage console
>
> Has anyone experienced this problem and what was the cure ? It has done it
> before when the batteries previously failed but I dont know what I did to
> remedy the situation.
> Thanks for any help.
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/9b1973cc-a646-421c-85c0-44e58ece7f93%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEB8CXqvToL7BSaRBB0Oe6SkMUGy-ggoMeh3Ym0DFLEsNw%40mail.gmail.com.

[weewx-user] Davis Vantage Problem

[Steve Shuff]

Hi All,
I am hopeful someone can shed some light on this error .

My setup consist of a RPi 3 (Raspbian) running WeeWX 3.9.2 to which is 
connected a Davis Envoy logger, The ISS is transmitting OK as can be 
verified on the indoor console.

The setup runs fine until the Envoy batteries died, these were replaced and 
the Pi rebooted and the system restarted.
Now my data is not being produced on the graphs etc , Upon looking at the 
syslog I see two errors,

Apr  2 10:12:10 raspberrypi weewx[1195]: vantage: LOOP try #1; error: 
Expected to read 99 chars; got 0 instead

Apr  2 10:11:56 raspberrypi weewx[1195]: vantage: DMPAFT try #2; error: 
Unable to pass CRC16 check while sending data to Vantage console

Has anyone experienced this problem and what was the cure ? It has done it 
before when the batteries previously failed but I dont know what I did to 
remedy the situation.
Thanks for any help.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/9b1973cc-a646-421c-85c0-44e58ece7f93%40googlegroups.com.