[Ninux-Wireless] multi M5
Ho visto sul blog che per l'installazione dell'ultimo nodo Fish Co. hanno usato uno switch per collegare la M5 con l'airGrid. ma non sarebbe possibile usare la secodary ethernet della M5 messa in bridge con la eth0 principale? così da mettere volendo anche più nanostation a cascata? ovviamente se una va in fail interrompe la catena, ma è solo questo l'inconveniente? ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
Re: [Ninux-Wireless] Fwd: [Olsr-users] Anyone with verified 802.11n HT speeds on Ubiquiti M devices in adhoc/mesh mode?
funziona su M5... quello che manca e' la possibilita' di avere un simultaneo VAP in managed :( 2011/3/23 Gioacchino Mazzurco gmazzurc...@gmail.com -- Forwarded message -- From: Ben West westbyw...@gmail.com Date: 2011/3/22 Subject: Re: [Olsr-users] Anyone with verified 802.11n HT speeds on Ubiquiti M devices in adhoc/mesh mode? To: Daniel A. Nagy nagyd...@epointsystem.org Cc: olsr-us...@lists.olsr.org For an update, I believe I was able to get HT modes working in IBSS (aka adhoc) on two Nanostation M5s. The Links reported 150Mbit/s connection on both ends after settling, and throughput measured at 45Mbit/s. This required patches to iw and compat-wireless on OpenWRT r25206. More info here: https://forum.openwrt.org/viewtopic.php?pid=131299#p131299 I would be interested to hear if anyone has been able to specify HT modes in /etc/config/wireless on OpenWRT, since I was unable. Note that the link speeds did suggest I was getting multiple chains (i.e. MIMO) very briefly. My test environment (indoor room, 20feet separation) could have been non-ideal. On Mon, Mar 14, 2011 at 2:48 AM, Ben West m...@benwest.name wrote: Sorry for not explaining this in the original post. It is described in OpenWRT forum post; I had snipped my question to this list to focus on mesh-related question. Gateway: Rocket M5, flashed with pre-compiled openwrt-ar71xx-ubnt-rocket-m-squashfs-factory.bin for Backfire 10.03-rc4 Repeaters (and a backup gwy): Nanostation M5, flashed with custom-compiled pre-compiled openwrt-ar71xx-ubnt-nano-m-squashfs-factory.bin from Backfire r24045, and with this patch to allow DHCP on 2nd LAN port: http://freifunk.net/pipermail/wlanware/2010-December/002439.html Basically, I'm curious to hear details (e.g. patches, what revision of OpenWRT/ath9k) where people have confirmed getting HT modes to work. Besides that, these nodes are actually working just fine, and their link speed generally outpaces the uplink I have for them anyway. It's just that I would like to support ~40Mbit link speed in the intermediate future, should a fast enough uplink appear. On Mon, Mar 14, 2011 at 2:37 AM, Daniel A. Nagy nagyd...@epointsystem.org wrote: On 03/14/2011 06:10 AM, Ben West wrote: I just set up 3 Ubiquiti M5 devices as mesh nodes running OpenWRT Since Ubiquiti M5 devices are not as identical as the pre-M series, could you be more specific? These three categories are quite distinct, require different firmware and have their own, distinct quirks: - PicoStation / Bullet M5 - NanoStation M5 - NanoStation M5 Loco Cheers, -- Daniel -- Olsr-users mailing list olsr-us...@lists.olsr.org http://lists.olsr.org/mailman/listinfo/olsr-users -- Ben West westbyw...@gmail.com -- Olsr-users mailing list olsr-us...@lists.olsr.org http://lists.olsr.org/mailman/listinfo/olsr-users ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
Re: [Ninux-Wireless] Fwd: [Olsr-users] Anyone with verified 802.11n HT speeds on Ubiquiti M devices in adhoc/mesh mode?
piu' che ath9k sembra un problema ath9k + hostap stiamo a vedere come evolvono le cose. 2011/3/23 Gioacchino Mazzurco gmazzurc...@gmail.com si ho gia' aperto un bug da tempo per il VAP ma sembra che al momento e' proprio al modalita' AP che ha bisogno di essere stabilizzata su ath9k dopo di che probabilmente aggiusteranno anche i VAP 2011/3/23 Antonio Anselmi tony.anse...@gmail.com: funziona su M5... quello che manca e' la possibilita' di avere un simultaneo VAP in managed :( 2011/3/23 Gioacchino Mazzurco gmazzurc...@gmail.com -- Forwarded message -- From: Ben West westbyw...@gmail.com Date: 2011/3/22 Subject: Re: [Olsr-users] Anyone with verified 802.11n HT speeds on Ubiquiti M devices in adhoc/mesh mode? To: Daniel A. Nagy nagyd...@epointsystem.org Cc: olsr-us...@lists.olsr.org For an update, I believe I was able to get HT modes working in IBSS (aka adhoc) on two Nanostation M5s. The Links reported 150Mbit/s connection on both ends after settling, and throughput measured at 45Mbit/s. This required patches to iw and compat-wireless on OpenWRT r25206. More info here: https://forum.openwrt.org/viewtopic.php?pid=131299#p131299 I would be interested to hear if anyone has been able to specify HT modes in /etc/config/wireless on OpenWRT, since I was unable. Note that the link speeds did suggest I was getting multiple chains (i.e. MIMO) very briefly. My test environment (indoor room, 20feet separation) could have been non-ideal. On Mon, Mar 14, 2011 at 2:48 AM, Ben West m...@benwest.name wrote: Sorry for not explaining this in the original post. It is described in OpenWRT forum post; I had snipped my question to this list to focus on mesh-related question. Gateway: Rocket M5, flashed with pre-compiled openwrt-ar71xx-ubnt-rocket-m-squashfs-factory.bin for Backfire 10.03-rc4 Repeaters (and a backup gwy): Nanostation M5, flashed with custom-compiled pre-compiled openwrt-ar71xx-ubnt-nano-m-squashfs-factory.bin from Backfire r24045, and with this patch to allow DHCP on 2nd LAN port: http://freifunk.net/pipermail/wlanware/2010-December/002439.html Basically, I'm curious to hear details (e.g. patches, what revision of OpenWRT/ath9k) where people have confirmed getting HT modes to work. Besides that, these nodes are actually working just fine, and their link speed generally outpaces the uplink I have for them anyway. It's just that I would like to support ~40Mbit link speed in the intermediate future, should a fast enough uplink appear. On Mon, Mar 14, 2011 at 2:37 AM, Daniel A. Nagy nagyd...@epointsystem.org wrote: On 03/14/2011 06:10 AM, Ben West wrote: I just set up 3 Ubiquiti M5 devices as mesh nodes running OpenWRT Since Ubiquiti M5 devices are not as identical as the pre-M series, could you be more specific? These three categories are quite distinct, require different firmware and have their own, distinct quirks: - PicoStation / Bullet M5 - NanoStation M5 - NanoStation M5 Loco Cheers, -- Daniel -- Olsr-users mailing list olsr-us...@lists.olsr.org http://lists.olsr.org/mailman/listinfo/olsr-users -- Ben West westbyw...@gmail.com -- Olsr-users mailing list olsr-us...@lists.olsr.org http://lists.olsr.org/mailman/listinfo/olsr-users ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
[Ninux-Wireless] [blog] Potenziamento nodo Fusolab
Nuovo post sul blog (Ninux.org Wireless Community): 'Potenziamento nodo Fusolab' di hispanico Sveglia alle 6:30 e come da programma ci si vede con Fish al C'era una volta il cafè alle ore 7:00 per la colazione. Ore 7:30 siamo già sul tetto del Fusolab per smantellare il nodo esistente e tirar su il SuperNodeFusolab, le previsioni non promettono bene ma la pioggia è prevista per le 10:30. Senza perdere tempo iniziamo a smontare il pannello e la stella doratus, sistemiamo per bene i cavi LowLoss e la Alix, infine fissiamo al muro la nuova scatola che conterrà la 220V con i PoE e lo Switch. Successivamente passiamo a montare e fissare i nuovi apparati sul palo: NanoStationM5 verso Mara e Ex-Snia NanoStationM5 verso Clauz NanoStationM5 verso Hispanico AirGridM5 verso Brembo Verso le 8:30 ci raggiunge Lux e ci mettiamo a infilare i fili nella nuova guaina mentre Fish finisce di sistemare le antenne e la scatola per l'alimentazione. Finito di sistemare il tutto, proprio quando siamo pronti per chiudere la scatola, inizia a fare le prime gocce e come se non bastasse Fish si accorge di aver montato la scatola troppo vicino al palo e non si riesce a chiudere il coperchio. :( La pioggia comincia farsi insistente e tamponiamo il problema con una busta di plastica a spettando che smetta di piovere. Per nostra fortuna dopo 15 minuti possiamo riprendere i lavori. Lux vedendo Fish un po demoralizzato, prende in mano la situazione e con il mio aiuto provvediamo a spostare la scatola in una posizione migliore. Questa volta fila tutto liscio e siamo pronti per presentarci a casa di Tony dove porteremo la connessione internet in cambio della corrente per alimentare gli apparati. Mentre Fish e Lux sono da Tony, con Lorenzo e Paolo (che ci hanno raggiunto nel frattempo) andiamo al Fusolab per configurare i nuovi appartati e tirar su in nuovi Link. Verso l'ora di pranzo ci raggiunge anche Nino, la squadra è al completo e siamo tutti concentrati nella configurazione, che per la legge di Marphy, non fila liscia. Tra due apparati i pacchetti vengono rimbalzati tra di loro e non riusciamo a capirne il motivo. Soltanto nel pieno del Giovedì Nerd viene svelato l'arcano mistero: un apparato, sul tetto di Fish, annuncia in OLSR lo stesso IP di una M5 del Fusolab anche se non possiede quell'indirizzo 8-O Sistemato il problema, la rete inizia a funzionare e finalmente il nodo del Fusolab è degno di essere chiamato SuperNode :D Marco Dimenticavo per chi non ha mai visto Fish all'opera ecco un piccolo video: Fish at Work http://blog.ninux.org/2011/03/23/potenziamento-nodo-fusolab/ (messaggio generato automaticamente) ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless