Re: [WISPA] NanoBeam Problems
No such issues here with more then 100 deployed. Actually have to include that yesterday we replaced a NanoBridge M2 with a NanoBeam M2 and solved a major issue on a tower. The tower, which is a little crowded with mostly PowerBridges and AirFibers... had three M2 radios, a Rocket Dish, NanoBridge, and NanoBeam. We replaced those three with a 60 degree Titanium sector with standard rocket M2... which helped the interference issue, but did not solve it. So we replaced the three down stream NanoBridges with NanoBeams and now all is good. Went from signals in of high 70s and low 80s with CCQs as low as 50... to signals in from 68-72 and CCQs 90-99. But most of my guys have not being using the template for this model, but upgrading and programming on site. Something we are changing... a staff person assigned to load our templates on radios before install techs grab them out of storage. As an old, old programmer, I would highly suggest following the advice above and have template configs by model and OS version. Sometimes in programming and design, you have no choice but to make a change in a file structure that breaks loading a previous version (template for example) of anything. Assume that with any OS release, that you need a new template. On Wed, Sep 17, 2014 at 8:45 AM, Greg Osborn gregwosb...@gmail.com wrote: I had it happen the other day. Fresh install, told tech, “hold on, I need to update fw” 5 minutes later it hadn’t come back. Reboot didn’t work. Couldn’t access from our 192.168.100.1 address or the default. Had to hard reset. It did however, take the upgrade. *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Josh Luthman *Sent:* Tuesday, September 16, 2014 3:11 PM *To:* WISPA General List *Subject:* Re: [WISPA] NanoBeam Problems That doesn't seem possible... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailbox https://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
I had it happen the other day. Fresh install, told tech, “hold on, I need to update fw” 5 minutes later it hadn’t come back. Reboot didn’t work. Couldn’t access from our 192.168.100.1 address or the default. Had to hard reset. It did however, take the upgrade. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, September 16, 2014 3:11 PM To: WISPA General List Subject: Re: [WISPA] NanoBeam Problems That doesn't seem possible... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.com mailto:timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailbox https://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca mailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org mailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org mailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
[WISPA] NanoBeam Problems
Anyone else having problems with nanobeams crashing after a firmware update? It's starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
You using 5.5.9 or the new 5.5.10 beta?— Sent from Mailbox On Tue, Sep 16, 2014 at 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It's starting to be a common occurrence for us. Bryce D NETAGO___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
5.5.9 from 5.5.6 Bryce D NETAGO From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of timothy steele Sent: Tuesday, September 16, 2014 13:06 To: WISPA General List Cc: WISPA General List (wireless@wispa.org) Subject: Re: [WISPA] NanoBeam Problems You using 5.5.9 or the new 5.5.10 beta? — Sent from Mailboxhttps://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:00 PM, Bryce Duchcherer bduc...@netago.camailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
A nano beam had 5.5.6 on it? That seems strange— Sent from Mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
That doesn't seem possible... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailbox https://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
They come with 5.5.6 out of the box – all the ones we have gotten have anyway. Bryce D NETAGO From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of timothy steele Sent: Tuesday, September 16, 2014 13:09 To: WISPA General List Cc: WISPA General List Subject: Re: [WISPA] NanoBeam Problems A nano beam had 5.5.6 on it? That seems strange — Sent from Mailboxhttps://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.camailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
It's possible. Very old ones. Maybe beta only. I can't remember if 5.5.4 or 5.5.6 was the first. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com http://www.spitwspots.com On 09/16/2014 11:10 AM, Josh Luthman wrote: That doesn't seem possible... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.com mailto:timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailbox https://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com mailto:j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 tel:937-552-2340 Direct: 937-552-2343 tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca mailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org mailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org mailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
Nope I was wrong. I just got a box of them and they're all 5.5.6. These were airshipped and arrived this morning to my address. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:12 PM, Josh Reynolds j...@spitwspots.com wrote: It's possible. Very old ones. Maybe beta only. I can't remember if 5.5.4 or 5.5.6 was the first. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com On 09/16/2014 11:10 AM, Josh Luthman wrote: That doesn't seem possible... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailbox https://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing listWireless@wispa.orghttp://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
We have had to reset them to factory and upgrade them in office before putting them out. If you use a standard config file for all your radios, STOP! All configs are not created equal. What we found was our NnoBidge config worked great on NanBeams until the next upgrade and then they crashed. We now have a separate config file for every model, every revision, and every firmware change we remake then all. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, September 16, 2014 3:15 PM To: WISPA General List Subject: Re: [WISPA] NanoBeam Problems Nope I was wrong. I just got a box of them and they're all 5.5.6. These were airshipped and arrived this morning to my address. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:12 PM, Josh Reynolds j...@spitwspots.commailto:j...@spitwspots.com wrote: It's possible. Very old ones. Maybe beta only. I can't remember if 5.5.4 or 5.5.6 was the first. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.comhttp://www.spitwspots.com On 09/16/2014 11:10 AM, Josh Luthman wrote: That doesn't seem possible... Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.commailto:timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailboxhttps://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.camailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
I've got an nsm2 config and beam2 config. Never drilled down to firmware versions (past 5.5). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:25 PM, Steve Barnes st...@pcswin.com wrote: We have had to reset them to factory and upgrade them in office before putting them out. If you use a standard config file for all your radios, STOP! All configs are not created equal. What we found was our NnoBidge config worked great on NanBeams until the next upgrade and then they crashed. We now have a separate config file for every model, every revision, and every firmware change we remake then all. *Steve Barnes* General Manager PCSWIN.com Howard LLC. *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On Behalf Of *Josh Luthman *Sent:* Tuesday, September 16, 2014 3:15 PM *To:* WISPA General List *Subject:* Re: [WISPA] NanoBeam Problems Nope I was wrong. I just got a box of them and they're all 5.5.6. These were airshipped and arrived this morning to my address. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:12 PM, Josh Reynolds j...@spitwspots.com wrote: It's possible. Very old ones. Maybe beta only. I can't remember if 5.5.4 or 5.5.6 was the first. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.com On 09/16/2014 11:10 AM, Josh Luthman wrote: That doesn't seem possible... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailbox https://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
We have been using a config for each AP. Personally, when I have set them up I have applied the Config with 5.5.6 and then upgraded to 5.5.9 and things seemed to work, but when applying a config on 5.5.9 I had some M5’s that reset to defaults. I am not sure which order our tech’s are doing it in, but we had several today that flat out quit after trying to upgrade firmware. I May have to create a blanket Config for M2 beams and M5 beams that aren’t set up for any specific AP. Bryce D NETAGO From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Steve Barnes Sent: Tuesday, September 16, 2014 13:26 To: WISPA General List Subject: Re: [WISPA] NanoBeam Problems We have had to reset them to factory and upgrade them in office before putting them out. If you use a standard config file for all your radios, STOP! All configs are not created equal. What we found was our NnoBidge config worked great on NanBeams until the next upgrade and then they crashed. We now have a separate config file for every model, every revision, and every firmware change we remake then all. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, September 16, 2014 3:15 PM To: WISPA General List Subject: Re: [WISPA] NanoBeam Problems Nope I was wrong. I just got a box of them and they're all 5.5.6. These were airshipped and arrived this morning to my address. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:12 PM, Josh Reynolds j...@spitwspots.commailto:j...@spitwspots.com wrote: It's possible. Very old ones. Maybe beta only. I can't remember if 5.5.4 or 5.5.6 was the first. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.comhttp://www.spitwspots.com On 09/16/2014 11:10 AM, Josh Luthman wrote: That doesn't seem possible... Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.commailto:timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailboxhttps://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.camailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
Re: [WISPA] NanoBeam Problems
I was told by Matt Hardy that there should be a differnet config for each radio. Pretty Simple reset one to factory make your default changes and save the config. One of my techs have even gotten good at loading the factory defaults remotely and making enough changes to that config that he doesn’t even loose access. I tell him whatever. You are the dude that has to go climb and fix it if you screw it up. So far only one has he bricked. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, September 16, 2014 3:36 PM To: WISPA General List Subject: Re: [WISPA] NanoBeam Problems I've got an nsm2 config and beam2 config. Never drilled down to firmware versions (past 5.5). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:25 PM, Steve Barnes st...@pcswin.commailto:st...@pcswin.com wrote: We have had to reset them to factory and upgrade them in office before putting them out. If you use a standard config file for all your radios, STOP! All configs are not created equal. What we found was our NnoBidge config worked great on NanBeams until the next upgrade and then they crashed. We now have a separate config file for every model, every revision, and every firmware change we remake then all. Steve Barnes General Manager PCSWIN.com Howard LLC. From: wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, September 16, 2014 3:15 PM To: WISPA General List Subject: Re: [WISPA] NanoBeam Problems Nope I was wrong. I just got a box of them and they're all 5.5.6. These were airshipped and arrived this morning to my address. Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:12 PM, Josh Reynolds j...@spitwspots.commailto:j...@spitwspots.com wrote: It's possible. Very old ones. Maybe beta only. I can't remember if 5.5.4 or 5.5.6 was the first. Josh Reynolds, Chief Information Officer SPITwSPOTS, www.spitwspots.comhttp://www.spitwspots.com On 09/16/2014 11:10 AM, Josh Luthman wrote: That doesn't seem possible... Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Sep 16, 2014 at 3:09 PM, timothy steele timothy.pct...@gmail.commailto:timothy.pct...@gmail.com wrote: A nano beam had 5.5.6 on it? That seems strange — Sent from Mailboxhttps://www.dropbox.com/mailbox On Tue, Sep 16, 2014 at 3:05 PM, Josh Luthman j...@imaginenetworksllc.commailto:j...@imaginenetworksllc.com wrote: To 5.5.9 no. Are you using the XW? Josh Luthman Office: 937-552-2340tel:937-552-2340 Direct: 937-552-2343tel:937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 16, 2014 3:00 PM, Bryce Duchcherer bduc...@netago.camailto:bduc...@netago.ca wrote: Anyone else having problems with nanobeams crashing after a firmware update? It’s starting to be a common occurrence for us. Bryce D NETAGO ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.orgmailto:Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless ___ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless